Hey guys, I'm having trouble finding any brand left that sell tempered glass for this phone.
The only one I found is XGear, base on the image I am certain that the designed is by having the adhesive stickers on the bezel/edges only, while the viewable area isn't adhesive. I have used tempered glass of similar design before and it is terrible. Since the adhesive stickers are thin on the edges, its not very durable and can leave gaps or pop out (especially since this is a curved screen), and let water in. It will also cause "rainbow effects" due to the gap between the two glasses. There are Amazon reviews that reflected my concern.
I'm looking for something like this which have the entire surface being clear and able to stick.
Doesn't seem like there are any available, but I wouldn't mind using tempered glass for another phone model that could fit on the Nexus screen, I think that's the best way to go. But I won't receive my Nexus in a few days, then I can see if the screen protector of the Moto X fit inside the Galaxy Nexus screen.
Bought a Nillkin Tempered GLass for my Note 3. Guess what.....after a month, the screen cracked by itself! I'm very sure it was not caused by wrong handling nor impact. All this 9H hype by Nillkin is just bull! Choose another brand!
Well I just decided to order a second i-Blason for the Moto X and put it on the Nexus. Kind of awkward, but it work. Couldn't fully stick because of the curved glass though, but the adhesive is durable enough so I'm not worried.
eksasol said:
Well I just decided to order a second i-Blason for the Moto X and put it on the Nexus. Kind of awkward, but it work. Couldn't fully stick because of the curved glass though, but the adhesive is durable enough so I'm not worried.
Click to expand...
Click to collapse
Was gonna buy the xgear thanks for the insight!
Galaxy Nexus
ROM: SlimKat 4.4.2
funny how purchases get based on "user" reviews. i read all 12, and the bad reviews remind of typical users that don't read directions, don't follow directions and then think if they pitch a fit with the manf and bad mouth the product they'll be redeemed of their stupidity.
dust under the screen or lifts at the curve?
1. poor cleaning prior to affixing
2. repeated removing and reapplying and failing 1.
it cracks? really? it's glass, treat it as such and pay attention to 1 & 2 above.
install tip: align and start from one end. it's not a bumper sticker, do not apply it as such.
dots and rainbow? if turned off and angled just right you can see it. turn it on and they're gone. the rainbow kind of reminded of how some windshields look while wearing polarized sunglasses.
i mostly lurk these forums but couldn't let this go. i've had my xgear tempered glass protector on for 2yrs without issue. i will buy more from them if available and my device doesn't have gorilla glass.
well worth the $30+ i spent at the time, has saved my phone too many times to count.
I'm also looking for a tempered glass that is different from Xgear...
I just installed an xGear Fantom (and just replaced my broken screen), I don't see any rainbow effect. I did notice that the protector at the sides sat flat against the screen, but were it curved it bowed out in the center. Looked clear, but definitely was not flush against the glass. I put a thick sock on the screen and some weight over top of it (a thick heavy hard cover book and a medium sized socket set), and that eliminated the bow and put a massive rainbow bubble into the middle of the screen. I lifted the top right corner of the protector slightly and the bubble moved straight out on it's on. It now sits 100% flat. I don't notice any loss of touch sensibility. As far as I can tell, this is going to work well, and last a loooong time.
Sent from my Galaxy Nexus using XDA Free mobile app
xGear Fantom is expensive to me and it has bad critics. I'm trying to find another alternative although it is to another model of mobile with the similar screen's sizes 135.5 x 67.94 mm and the holes fit well. The Moto X's screen seem too small.
I think only xGear makes a tempered glass protector for the G'nex. Might be able to use one for another model, but I don't think it would work any better and you would have a higher chance of running into poor fitment.
But I do understand what your saying - some G'nex have a sensitivity bug that the xGear exaggerates (I'm lucky I don't), while some people have had problems with the glue giving out as well as sensitivity issues not related to the bug.
I'd think you could run into those issues with any brand of glass screen protectors, and further might run into other issues with fitment if the protector is for a different phone.
I can't say if I'll have adhesion issues (and so far nope - but only been barely a week or so since installing it), though I think I would have both if I had not noticed and taken care to eliminate the slight bulge out where the glass curved.
Mine did lay flat at the sides along the protectors boarder, and while it was clear for viewing the screen (as in it didn't look like I had air trapped under the protector), it was clearly bulged out (due to an air pocket) a few mm in the center of the screen where it naturally curves when viewed from the side - I was able to correct that with the weight and slight lifting of a corner.
Sadly, you may want to run your naked (no protector) or with a PET film protector.
Sent from my LG-D852 using XDA Free mobile app
BTW - I only paid something like $11 (Canadian) for my Fantom, and that includes shipping. I don't think it was a huge expense at all.
Sent from my LG-D852 using XDA Free mobile app
I think it's not necessary to use any kind of screen protection.
I have my GNex more than 2 years without using screen protector and it doesn't have any scratches
I bought a tempered glass protector ( Moto X) to my Samsung Galaxy Nexus
Unfortunately I did not find any that fit perfectly but it work rigth to me.... it was very cheap in aliexpress, only 1,60€ :good:
Related
Is it just me or is it hard to find a screen protector that covers the entire front for the GS3??? I've been to Bell, Rogers and videotron and all 3 had a screen protector that were too small, it seemed to be cut out for the GSIII but left the bezel unprotected and made it more than annoying to swipe on your screen, I purchased 3 in-store and 1 on ebay and all of them, different brand but they were all the same, the covered just the screen and left the bezel nude. I finally had no choice, i was so tired of buying screen protector and havong to return them that i bout the 30$ Zagg Invisible Shield HD at bestbuy. This was the only one that was large enough to cover the front of the phone.
It's not just you; it's due to the fact that the screen for the SGIII is curved (similarly to that of the Galaxy Nexus). The only protector I'm aware of that compliments this feature is the upcoming Steinheil Curved Crystal: http://www.spigen.com/cell-phone/sa...creen-protector-steinheil-curved-crystal.html
well, it might be curved but that doesnt prevent people to make their screen protector 2mm wide on each side. I mean again, the screen might be curved but its barely visible, it not practically invisible. The Galaxy Nexus has a visible curve, but not the GS3
He provided a link above to what you want.
And the issue with the curve and a regular screen protector is that it will not properly stick to the curved edges - which was the issue with the nexus as well and thats why most of its screen protectors are cut short too.
The previous version of the ultra crystal did not stick to the edges of the screen due to the curve so they redesigned it to be the one he posted above.
It does not matter if the curve is visible or not, there is a curve.
lol this thread should be locked immediately... Try searching sometimes. It has been posted numerous times that the only covers that fir the whole screen at the moment are the wet install ones like Zagg.... Regular static cling one do not work because the are made from ridged material and are one FLAT piece which will not stick to the curved down sides..
SGP Flex HD covers the entire screen, but it's a wet install. It's close to impossible for a dry install cover to do full screen due to the curves.
Sent from my SGH-T999 using Tapatalk 2
Wet install protectors will cover the whole screen, dry install protectors won't. Simple as that
ATT's dry static cling screen protector made by "Moshi" does. I have had it from day one and I like it. I mean its not cheap but it gets the job done! I might install a ZAGG protector one day but not yet. I like the one I currently have.
yeah i hear you..i just installed a nano clear love it but not full on the corners..this will solve it..pre ordered
http://www.spigen.com/cell-phone/sa...creen-protector-steinheil-curved-crystal.html
Most screen protectors that are short of covering the whole screen these day are made that way on purpose, so that if you put on a case that grasps the bezel and or over a portion of the screen's edge, it won't lift up the protector..
I purchased this based on some feedback I had read one some other forums. I have tried nearly every major screen protector out there (Spigen, RearthUSA, Incipio, Switcheasy, BodyGuardz, XO Skins, Best Skins Ever, a ton of cheap ones off Amazon, Zagg, etc.). Up until this point, I had always found the Ultra Crystal from Spigen to be the best overall. Not anymore.
Before I get started I want to mention that the Martin Fields Screen protectors are not cheap. One screen protector for the Galaxy Nexus is $16.99 ($34.99 for one iPad protector and $29.99 for one Nexus 7 protector)and it only comes with one screen protector and a set of instructions. That's it.
One issue I've always found to be a huge problem with these dry, crystal clear screen protectors (Again, think Spigen Ultra Crystal) is that they show fingerprints so easily that it really can become a huge nuisance and to my surprise this one doesn't show much at all. I would say it's nearly as good at resisting fingerprints as a matte finish screen protector.
A very innovative feature this screen protector offers is that it is completely removable. They include a Mylar sheet that you can stick it to if you need to take it off. Just apply a small piece of scotch tape at the bottom corner and slowly pull to remove it. This does bring up the biggest problem that I have with this protector though. It is somewhat brittle. It will crease if you aren't careful with it. In fact, if you look in the pictures I have posted, you'll notice a slight crease in the bottom right corner. I've emailed the seller that I purchased it from on Amazon to see if they'll replace it. Not sure if that'll happen and it isn't all that distracting.
Quick Summary:
PROS:
As clear as any I've ever used
Does not pick up oils like most clear, dry application screen protectors generally do
Feels as close to glass as anything I've ever used
Reusable
Covers entire screen
Comes with a Camera Lens cover as well
CONS:
Not cheap. If you purchase directly from MartinFields.com it is $16.99 + $4.99 shipping. Be aware of fakes on Amazon.
Doesn't come with much. Just a simple paper package, a screen protector and a Mylar sheet to apply it to if you decide to take it off and use it later.
Fragile, it will crease if you aren't careful
Almost too big. If you don't line it up absolutely perfect it will not adhere on the sides, bottom. It's almost cut too perfect to a fault.
Anyway, here are some pictures. I had just ran my palm down the screen to show you just how well this does on hand oils.
Martin Field's Link
Well I take it no one found this helpful?
Breezer23 said:
Well I take it no one found this helpful?
Click to expand...
Click to collapse
I already have one but I will concur with everything you said
Mine creased before I put it on but I was able to bend it back and can't tell you where the crease ever was at this point. Mine is scratched up pretty good at this point but I'm hard on phones so it's not surprising. I've yet to find a screen protector that holds up to my use.
Mind had a crease initially. I contacted their support line in Hong Kong and they had one sent out to me the next day. I ended up buying one for my Nexus 7 and my iPad 3.
It's weird, the Ultra Crystal's and many other dry application protectors leave blue smears when you try to wipe away fingerprints. These don't. They are there but they don't leave that annoying blue greasy smudge.
Is it just me or do i have a weird Nexus 5?
I purchased these tempered glass screen protector:
MIME
Anker
iloome Flex
I am having a bit of frustration. The MIME and Anker both thicker than iloome Flex have both created "exact" small bubble areas between the led notification light. The bubbles are small and are about the size of half a grain of rice. It is very annoying. I have attempted to push the bubbles out but they always and will tend to just come back to its original form. I am mind blown. I ordered the Anker brand first and figured it was a defect to which I ordered MIME version and it was the exact same problem. Anyone experience this?
iloome Flex fits just fine but it is a bit thin with no bubbles but it doesn't feel the same as a thicker one like MIME or Anker.
I noticed a small dimple in my screen when I was looking at an overhead light being reflected off the screen. The image seemed slightly distorted. You could try that to see if you have the same issue.
Sent from my Nexus 5 using XDA Premium 4 mobile app
Very strange I'm using the iloome on my Note 3 I've had zero issues
I'm using The Mime Feather on my N5 awesome zero issues
It sounds to me like you have gotten like oil from a or some other foreign substance right there where the problem lays I would
Try to lift up the bottom with a razor blade and take a Q tip with some monster cleaner on it or something of that
Nature it's just really weird that happening in the same spot I'll bet money there's a foreign substance on phone
Since it's happened more then once I'll rule out the Protector itself, if your anything like me it probably you
Crazy so maybe it's worth the shot, I don't think it's a Protector thing......
Quite a few people were reporting this with all the early glass protectors. The phone's can have small dimples and if the adhesive isn't strong enough this can happen. I wouldn't count out the grease mark idea either though.
According to the shop I purchased from, it is normal because the tempered glass are flat. But the screen is not exactly flat. That's why. I am not quite too sure about this. But I chose to tolerate with it because I am happy with the build of the material.
Sent from my Nexus 5 using Tapatalk
chocolazy said:
According to the shop I purchased from, it is normal because the tempered glass are flat. But the screen is not exactly flat. That's why. I am not quite too sure about this. But I chose to tolerate with it because I am happy with the build of the material.
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
The first edition of the Spigen glas.tr had the same problem. They recalled them, made it thinner, thus more flexible, and increased the amount of adhesive, and the new version adheres perfectly, no bubbles.
Sent from my Nexus 5 using Tapatalk
you need a thinner flexible protector because the phone is very pliable... it's kind freaky but occasionally if you put it down on a table it will rock on the corners. but you can actually straighten the phone with just a little twist. my samsung phones were light and had some give but they had much better memory/elasticity... not so much maliability/ductility. one member sat on his n5 the first week and the screen ended up curving like a smasung gnex or nexus s resulting in some light bleed but a functional phone otherwise... i've never really liked the way lg makes a phone but i do love the overall package... i mean this thing is really fast and i love stock android simplicity.
I'm on my second Spidgen Glass.Tr (first one I got dust particles on). Both originally kept giving me air bubbles in the upper right hand portion of the screen I was able to work them out but it took a long time. Possible surface bump on the glass on the phone, perhaps on yours as well.
I just got my Nexus 5, my first Nexus phone, and I'm pretty excited about it. Naturally I want to add some protection to it especially since I will likely be going sans-case (at least for use, though I've ordered a leather/wool felt sleeve for it to take refuge in while not in the protection of my hands, which will work well with my Pebble as I don't need to constantly check the phone for notifications). A friend of mine that I talked into impulse buying the N5 ordered the Mime Feather Glass protector after his research. Looking through the threads I could find it looks like a lot of people have had issues with chipping edges on that model, and it sounds like a slew of other issues from other manufacturers like Spigen, and I don't like the extra cutouts on the Nillkin protector (just seems like an extra space for dust to collect and takes away from the sleekness a bit IMO). Anyway it looked like most of those posts originated closer to the launch time of the N5 so I'm wondering if any glass protectors have stood out for quality above the rest over the past couple months?
I know the tempered glass protectors are more expensive, but the feel, look, scratch resistance, and apparently debatable shatter protection of the underlying screen seem to be the best option. I saw the post about the Rhino Shield but the much lower scratch resistance and similar price coupled with the article claiming a ziploc bag offered similar protection deterred me slightly :silly:
tl:dr- looking for a sweet tempered glass screen protector to use without a case, what's the best option (overall/value)
Thanks!
TheBeardedAx said:
I just got my Nexus 5, my first Nexus phone, and I'm pretty excited about it. Naturally I want to add some protection to it especially since I will likely be going sans-case (at least for use, though I've ordered a leather/wool felt sleeve for it to take refuge in while not in the protection of my hands, which will work well with my Pebble as I don't need to constantly check the phone for notifications). A friend of mine that I talked into impulse buying the N5 ordered the Mime Feather Glass protector after his research. Looking through the threads I could find it looks like a lot of people have had issues with chipping edges on that model, and it sounds like a slew of other issues from other manufacturers like Spigen, and I don't like the extra cutouts on the Nillkin protector (just seems like an extra space for dust to collect and takes away from the sleekness a bit IMO). Anyway it looked like most of those posts originated closer to the launch time of the N5 so I'm wondering if any glass protectors have stood out for quality above the rest over the past couple months?
I know the tempered glass protectors are more expensive, but the feel, look, scratch resistance, and apparently debatable shatter protection of the underlying screen seem to be the best option. I saw the post about the Rhino Shield but the much lower scratch resistance and similar price coupled with the article claiming a ziploc bag offered similar protection deterred me slightly :silly:
tl:dr- looking for a sweet tempered glass screen protector to use without a case, what's the best option (overall/value)
Thanks!
Click to expand...
Click to collapse
The Mime feather is my first experience with extremely thin glass protectors. My experience at first was great, but it is starting to fall apart and I'm regretting my purchase. It started with the corners for some reason even though I have the heavy duty ballistic case on the phone. Now I'm getting whole cracks from one side to the other... Not even originating from the corners where it started. I am clueless as to how it happens because I have never dropped my phone.
If you're going to get a glass protector I strongly encourage you to get the non-thin versions. It's not a whole lot thicker and it is less likely to be brittle. I have used several normal thickness glass protectors in the past (Spigen) and was never disappointed in those. So far my experience with MIME is poor, but Spigen has been excellent and that includes their cases.
Thanks. I was tempted buy Iloome's flex glass cause it's on sale right now for $17 but I was thinking the thicker protector might be the way to go.
TheBeardedAx said:
I just got my Nexus 5, my first Nexus phone, and I'm pretty excited about it. Naturally I want to add some protection to it especially since I will likely be going sans-case (at least for use, though I've ordered a leather/wool felt sleeve for it to take refuge in while not in the protection of my hands, which will work well with my Pebble as I don't need to constantly check the phone for notifications). A friend of mine that I talked into impulse buying the N5 ordered the Mime Feather Glass protector after his research. Looking through the threads I could find it looks like a lot of people have had issues with chipping edges on that model, and it sounds like a slew of other issues from other manufacturers like Spigen, and I don't like the extra cutouts on the Nillkin protector (just seems like an extra space for dust to collect and takes away from the sleekness a bit IMO). Anyway it looked like most of those posts originated closer to the launch time of the N5 so I'm wondering if any glass protectors have stood out for quality above the rest over the past couple months?
I know the tempered glass protectors are more expensive, but the feel, look, scratch resistance, and apparently debatable shatter protection of the underlying screen seem to be the best option. I saw the post about the Rhino Shield but the much lower scratch resistance and similar price coupled with the article claiming a ziploc bag offered similar protection deterred me slightly :silly:
tl:dr- looking for a sweet tempered glass screen protector to use without a case, what's the best option (overall/value)
Thanks!
Click to expand...
Click to collapse
I am using MIME Ghost glass protector. It is excellent. I am using my N5 without a case.
psy_spy said:
I am using MIME Ghost glass protector. It is excellent. I am using my N5 without a case.
Click to expand...
Click to collapse
How long have you been using the Ghost? Any issues with peeling/chipping/bubbles?
I enjoy the spigen glastr nano slim. I haven't had any issues since i put it on week ago. I wrote a thread about it.
Sent from my Nexus 5 using Tapatalk
TheBeardedAx said:
How long have you been using the Ghost? Any issues with peeling/chipping/bubbles?
Click to expand...
Click to collapse
I have been using it for 2 weeks. No peeling/chipping issues since it is a bit thicker compared to feather. When I applied it on the phone, I got a very small bubble near the upper left corner. It disappeared after a day. Please read reviews from other mime ghost owners to get a fair idea. I remember seeing a separate thread for mime in the n5 forum.
I've got the spigen glass nano.tr slim (the one with rounded corners) coming the mail. Any tips on applying it? I REALLY get OCD (ADHD) if there's ANY dust or bubbles under the screen, so I have to do it perfectly, since it costs nearly £30.
Any advice on how to do it flawlessly?
I read somewhere about running the shower on hot for 30 mins, then doing it in the bathroom, because the hot air causes the dust to all fall to the ground and isn't flying around - but won't that cause condensation etc to build up on the screen in the seconds before you apply the protector?
Any tips would be greatly appreciated.
paradoxiumwind said:
I've got the spigen glass nano.tr slim (the one with rounded corners) coming the mail. Any tips on applying it? I REALLY get OCD (ADHD) if there's ANY dust or bubbles under the screen, so I have to do it perfectly, since it costs nearly £30.
Any advice on how to do it flawlessly?
I read somewhere about running the shower on hot for 30 mins, then doing it in the bathroom, because the hot air causes the dust to all fall to the ground and isn't flying around - but won't that cause condensation etc to build up on the screen in the seconds before you apply the protector?
Any tips would be greatly appreciated.
Click to expand...
Click to collapse
See my thread. Use the hinge method. I didn't do it in a steamy room, but it went on near flawless. (No dust, but only very slightly off center)
Sent from my Nexus 5 using Tapatalk
I got the xgear glass for nexus 4 and it was great. It save me phone, I drop it on is screen and nothing happens only the tempered glass was broken.
Sent from my Nexus 5 using XDA Premium 4 mobile app
KTT16 said:
See my thread. Use the hinge method. I didn't do it in a steamy room, but it went on near flawless. (No dust, but only very slightly off center)
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Regarding the hinge method, make sure when you close the hinge it falls smack dab center. No having to pull it to slightly center it, etc. The tape itself has some bit of tension so it will pull the screen protector back. I'm like 0.2mm off center and I'm very annoyed. So maybe when you tape the screen protector down, start slightly to the left (assuming you tape the right).
Also if you have access to a clean room, do it there. I regret doing it at home and not staying late at work to use the CDA and cleanroom to properly dust off my screen. A stupid eyelash fell off in the middle of the procedure and I have a freaking eyelash underneath my screen protector. LOL. Good thing it's at the bezel though.
The most effective method imo is the steamed washroom method which gives you lots of chances to get it right and you'll never get any dust or any other particles on your screen.
The cruzerlite glass screen protector is amazing. I need to write up a review on it now and take some pics as I've had it over a week. It honestly feels better than the real n5 screen.
>^.^< Sent From Meow nexus 5
I have the Mime Feather Glass and it works great. I did have to shave the corners of my Ringke case to prevent the screen protector from peeling up on the edges. See post #30 here: http://forum.xda-developers.com/showthread.php?t=2540471
On a side note., the screen protector did crack, from something I did, and Mime sent me a coupon for 50% off a new one.
Sent from my Nexus 5 using Tapatalk
I have a Nillkin protector, looks and feels great. Just wondering how a tempered glass protector fares against drops compared to those shatter proof polyurethane (non glass) screen protectors like Rhino Shield and Zagg Extreme. I know Tempered glass protectors can shatter but those others won't, I’m not worried about that, I’m more concerned about the level of protection they offer. Are glass protectors as good as those other ones at dispersing and dampening impact forces? I've seen a couple of videos on Rhino Shield and they look amazing.
I received the first gen of Spigen's SLIM.t screen protectors in mid-November and have been using it since. Initially, the product was great albeit it still attracted fingerprints. I was highly satisfied and the tempered glass looked and felt amazing (plus I managed to avoid any of the bubbles the majority of early buyers experienced).
But a month after normal use (I don't use a case either, but I'm very careful with my phone) it started chipping on the edges. I never dropped my phone or do anything that would cause damage, but magically out of no where the screen protector started chipping.
Currently today, I have 6 chips around my screen protector (2 at the top, 1 on the right, 3 on the left), and two clear cracks across my phone as well (both stemming from separate chips on the side). I'm not sure how the SPIM.tR Nano performs, but I can tell you that paying over $30 for a screen protector that chips this easily is not a worthwhile investment. Something to be aware of.
Zagg HD shield has no problems
Sent from my Nexus 5 using Tapatalk
KTT16 said:
I enjoy the spigen glastr nano slim. I haven't had any issues since i put it on week ago. I wrote a thread about it.
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
This. Best screen protector I've ever had, a little pricey but I'm glad I bought it.
Sent from my Nexus 5 using Tapatalk
Firstly, I have read through many of the threads existing on protectors.
When I checked YouTube to see if there were any videos comparing screen protectors for the OPX there were none, so I watched a video comparing 4 screen protectors for a different phone. Of these Armorz and Bodyguardz protectors seemed to come out on top, and survive the strenuous tests the videomaker put them through. It seems neither of these brands make protectors for the OPX.
Next I searched this forum and read through many of the threads on the different screen protectors. For as many people that promote the different protectors, there seem to be as many if not more detractors, complaining of rainbox effect, the protector fitting one OPX but not another, air bubbles, etc.
I ordered my OPX today, and I intend to order a Spigen OnePlus X Case Rugged Armor Black but I was hoping to compliment that with a screen protector.
I was hoping to order the best protector, that will fit my OPX, no rainbox effect, and that will not cause any isue with the Spigen Case - does this exist?
Simple answer is it depends on luck.
I have tried several including 1+, Nillkin, generic, full cover... None of them are perfect, if you go for any like the official 1+ one where only the display is covered you may end up with horrid air bubbles around the cover, many people complained of this-I only know of one guy who done it flawlessly. The plus side of this is that cases will fit fine. The full cover one is the best one I've tried, though it has a rainbow effect in the middle of the screen which can be seen under bright light conditions or on a white screen. This screen protector doesn't have any air bubbles and fits great, only downside is the rainbow, some cases should fit fine e.g. I use the Nillkin frosted back cover which fits without issue.
For me the small rainbow is something I can deal with unlike the air bubbles around the whole display which were an eye sore, you'd be lucky if you didn't get any. So it is hit and miss tbh, just trial and error, I wasted a good £20 on protectors for this phone, which is something I'll never do again.
In the end I ordered from Amazon:
OnePlus X Screen Protector,Nillkin®[Anti-Explosion ][With Camera film][With Back Protector]Amazing H+Pro 9H Tempered Glass Screen Protector for OnePlus X
You mention the protector you use covers the whole phone, but the thing is that I also want the added protection of the Spigen OnePlus X Rugged Armour.
Accepting that they all have flaws, as I can probably still cancel my order and change it, and considering I want front screen protection AND the Spigen Rugged Armour case, do you think I would be better with a different protector than the Nilkin?
*Air bubbles are the main thing I wish to avoid, I could live with a Rainbox effect, once it is only visible from certain angles etc.?
It is a real shame there are non more protectors, I really was sold on Bodyguardz or Armorz protectors after watching the videos where they were tested, and was disappointed to discover they do not make protectors the OPX. I am guessing they do not think there is enough of a market to make it worth their while.
I had a look at the case and it seems that the Nillkin one is probably your best option, as the case covers the sides and slightly overlaps on the front-full protector covers the whole front so you may get issues with it.
Have a look for yourself, here is the one I bought (and currently use):
http://www.ebay.com/itm/281856280418
This is the issue, you could risk bubbles and use the spigen or avoid them, live with a rainbow and use another case. It's down to luck, you may not get any bubbles or rainbow depending on which one you use.
The first sentence in your reply is not so clear, you are saying the Nilkin it is the best option although I may still have issues with it?
I ordered the protector you linked to on eBay about a week ago, but it will take a few weeks to get here!
I do have my Nilkin H+ protector here, my Spigen Rugged Armor case, and my OnePlus X arrived about 15 minutes ago
I want to try apply the Nilkin cover right away - I will post picture for others - but what is the best method? I read somewhere on the forum that we should make sure to use the 'x method', but I cannot remember what x is?
The full cover protector covers the whole front, I mean edge to edge, so the case may not fit-it may conflict with the glass. The Nillkin one only covers the display/screen not the side edges/bezels so you will have no issues with the protector and case.
I have never heard of the 'x method' so don't know, but the best method I have used is with tape or alignment stickers (your protector may have came with them). So you carefully align the protector with the display, apply the tape so it stays in place, remove the film and just close the protector (like a book), apply some pressure in the centre and leave it for a few minutes. Oh and make sure there isn't any dust before applying the glass, use a microfibre cloth to clean.
Also, just to clear things up-you may have issues with the full cover glass protector (not Nillkin-I gave the ebay link previously), the only issue with the Nillkin one is that if you botch it, you will have an air gap around the whole glass. Though if your lucky you may not.
I think this is the x method:
Chris.nl said:
I'm happy with it. The glass feels better then the plastic stock one.
Use the 'hinge method' to apply the screenprotector.
Click to expand...
Click to collapse
Though I haven't tried it myself.
Please upload some picture of your result when you are done
Used hinge method, still got the rainbow effect. I tried unhinging it a few times and cleaned both the screen and the protector and places it back on but there was always a rainbox effect - the last time I tried removing it the protector cracked
I was suspicious at the time when I tried installing the Nilkin Screen Protector, the plastic film removable cover of the protector was on the OUTSIDE of the tempered glass!!!!
WTF!
I know it was on the outside, and not the inside, because the holes in the glass for the front ear speaker and front camera would only line up when the film cover was on the outside, that is facing me as I looked down at the phone. This was the first tempered glass screen protector I ever tried to install, so I assumed I must be mistaken and continued trying to install.
From the videos I have looked again, it seems that this film cover should always be on the inside of the protector (before being removed), that is, on the side of the tempered glass that will be touching the screen of the phone?
Thanks, yes that is the method, see my comments on how it did not work and how I think they somehow sent me a screen protector with the film cover on the wrong side.
xx
As you can see the plastic film protector is on the wrong side of the tempered glass, well, if you want the holes for the speaker and camera to line up!
http://i.imgur.com/VJU5LC7.jpg"]http://i.imgur.com/VJU5LC7.jpg
Yeah, the film is on the inside, the side that attaches to the screen, peeling the plastic sheet off exposes the adhesive bit which sticks to the glass. Just saw the pictures, bad luck man. I got through like 3-4 protectors before settling-if that makes you feel better.
Then I am not losing my mind! Did you see the picture I posted?
Amazon are refunding me at least. I hate that I could not apply a protector to the brand new screen.
Like I said before, I have ordered the one you recommended but it will take some weeks to arrive, and I think you said it will not fit with my Spigen Rugged Armor case anyway.
Can you recommend any others and I will order now? I am in Ireland so possible options are Amazon UK or ebay, though I guess I can order from anywhere really.
As this device is relatively new (only a few months old) there are not many variations of protectors available. As far as I am aware there is the Nillkin type which covers the screen only and the full cover which covers the whole front. I got the ebay one in about a week (China to London), I chose standard delivery (its free and faster than economy).
Check the image in my post here: http://forum.xda-developers.com/showpost.php?p=65705849&postcount=37
That is the full cover one, I had an issue and got it replaced, now it only has a slight rainbow-but I can live with it.
TIFU - I did not realise the second smaller hole in the Nilkin tempered glass was for the proximity sensor, the camera has no hole...