Related
I looking for the best screen protect for my capy
Sent from my SAMSUNG-SGH-I897 using XDA App
Took three tries and a slight trim of the long edge, but 3 ANTI GLARE Screen LCD for Samsung Captivate Galaxy S off ebay gave me what I want: a bubble free matte screen installation. item #380262378182.
Thanks I going to order from ebay
You don't NEED a screen protector.
The Samsung Galaxy S has Gorilla Glass from Corning.
Check a torture test here (on a Dell Streak, which I also have - but it has the same glass) and tell me if you really need a lousy plastic sheet on your beautiful screen.
Check out the gorilla glass website. The got a pictireo of a gorilla with its arse up in the air kissing a pane of glass LOLS
Sent from my SAMSUNG-SGH-I897 using XDA App
FWIW, My phone hangs out in my pocket all day, every day, with keys and loose change etc. I have zero scratches on the glass and the naked glass feels much better than any screen protector IMHO.
Don't get yourself all worked up over choosing the "right" screen protector. Just buy the 3 pack from at&t and call it good
Sent from my SAMSUNG-SGH-I897 using XDA App
Steinheil protectors are fantastic -- only ones I've found that don't leave smudges and fingerprints all over. (They do dull the screen a bit, but since the amoled screen is too bright to begin with, that's not a problem IMO.)
ninjuh said:
Don't get yourself all worked up over choosing the "right" screen protector. Just buy the 3 pack from at&t and call it good
+1
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
Sent from my SAMSUNG-SGH-I897 using XDA App
itsjustaphone said:
FWIW, My phone hangs out in my pocket all day, every day, with keys and loose change etc. I have zero scratches on the glass and the naked glass feels much better than any screen protector IMHO.
Click to expand...
Click to collapse
Look at it in the sun at an angle so it reflects the sun off the screen, you will see lots of micro scratches. This is on both our captivates. Sure, they're not "SCRATCHES" like the usually unsightly ones, they are just micro, or super thin.
Just because it can handle an impact doesn't mean it's scratch resistant. Personally have used the Phantom Skinz protector in the past and am currently using the Realook protector now. If you like the slight rubbery feel of the "skinz" type of protector you have plenty of options. I used the Phantom Skinz because it seemed to have the least orange peel look. After exchanging my captivate for another one (I had the random shut down issue) I used the Realooks static style screen protector. I prefer this one since it's almost nake glass feeling and I can totally say it can take a decent scratch. I got a nice dent from a fall off my desk onto a barbell that dented my chasis and also nicked the screen protector but no scratches. Best thing is you get 2 so if one gets farked you still have a spare. Best screen protector is one you will use and be happy with.
It still scratches even with the Gorilla Glass. Not big scratches, but they are visible at certain angles - it may or may not bother you.
I've used two types, SGP and Realook. Both are highly regarded, and from my experience SGP doesn't have any rainbow effect like Realook, but Realook has a much more natural feel. Both are excellent.
i took off my screen protector a couple months ago and i sometimes regret it. theres a few scratches on the screen but you cant really see them unless you hold the phone at a specific angle in the light. it doesnt really bother me that much. it is kind of annoying having to clean the fingerprints though.
I have invisishield its great only paid twenty for it with a lifetime warranty you I've had mine for about 4 months and it has yet to get a scratch and I even took a knife and scraped it across the screen surely no scratches but in the end I guess it is all up preference
Sent from my Samsung captivate running 2.3b4
Dont mean to hi jack the thread but is there a way to clean a screen protector? I was installing mine and it slipped out of my hand. I have tried using scotch tape to the debris off of it but I cant get all of it. Any ideas????
Invisishield
I've had the Invisishield on my phone since late August. I just recently had to exchange that under warranty and the Invisishield removed easily and installed easily on the new phone, no air pockets at all. Still looks like the day I bought it.
jfuq20 said:
I have invisishield its great only paid twenty for it with a lifetime warranty you I've had mine for about 4 months and it has yet to get a scratch and I even took a knife and scraped it across the screen surely no scratches but in the end I guess it is all up preference
Sent from my Samsung captivate running 2.3b4
Click to expand...
Click to collapse
possible one of the WORST things to put on a phone's screen. Especially a touch screen phone with one of the best glass and screens.
The invisishield and all others LIKE IT offer nothing but horrible viewing and use. The cover often resists your fingers movements, your fingers often drag on it and the smoothness of glass is all gone and replaced by a crappy rubbery and not to mention GRAINY protector.
Surprisingly, the only thing close to being clear, and smooth is the cheap stuff on ebay. I've used them and they offer great protection and are cheap enough to change out every month. I no longer use one.
for what its worth I got the BodyGuardz protectors when they were on thanks giving sale.
It does not feel like the glass, given, but i almost feel like i like that it gives just a little resistance to my touch. it does have the slightest orange peel effect but you can only see it if its off and at an angle.
Its not perfect, but I like it especially since I have a bit of OCD and it would drive me crazy if i got the smallest scratch on the screen. This gives me piece of mind.
ccdoggy said:
for what its worth I got the BodyGuardz protectors when they were on thanks giving sale.
It does not feel like the glass, given, but i almost feel like i like that it gives just a little resistance to my touch. it does have the slightest orange peel effect but you can only see it if its off and at an angle.
Its not perfect, but I like it especially since I have a bit of OCD and it would drive me crazy if i got the smallest scratch on the screen. This gives me piece of mind.
Click to expand...
Click to collapse
http://cgi.ebay.com/3pcs-Clear-LCD-...218142?pt=PDA_Accessories&hash=item5add8f621e
you're better of with these. They're clear and dont have the resistance you feel with other rubbery protectors. I'd use the ebays ones before anything else, especially if you are OCD.
At $1.57 for 3, you can change it every month if you want, but I've had good luck with them in the past.
I got gadgetshieldz they cost around $6 for full body protection. Worked for me, they are quite nice easy to install and quite good in performance. A word of caution though the it took 20 days for it to get to me in Canada.
Sent from my SAMSUNG-SGH-I897 using XDA App
Hey guys, having been a die-hard fan of SGP ultra crystal screen protectors for all the devices in the home (Evo LTE, One, iPhone 4(s), Asus TF101), I was a little disappointed to learn from another thread here that SGP didn't have plans to bring their tempered glass screen protector to our shiny new N7 FHDs. I had checked out the SGP model on my friend's Note 2 and decided that on my next device i would give one of these a try. Luckily i-Blason came to the rescue with their version of a tempered glass screen protector and here's my review, I hope it will be helpful and perhaps answer some questions.
The protector was packaged in a plastic folder frame and came in a padded envelope. On the inside it had the regular microfiber square, squeegee, and the protector itself in a paper sleeve as well as the protective plastic on both sides.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Immediately I noticed how much thicker and stiffer it was compared to the dry apply plastic ones. I tried to flex it a bit and of course being at that thickness, it did have a small amount of give but overall pretty hard. I tried to get a picture of how thick it is compared to an SGP Ultra Crystal for the HTC One that i had lying around, but the photos don't really illustrate too well the difference between the two. The first is the i-Blason, second is the SGP.
Looking at the screen protector itself I thought there were holes for the camera and the sensors, however it was actually the case that it was actually just thinner at those parts in the back, the front is one continuous piece with no holes in it. This came as a surprise to me as I was expecting holes, but given how thick it is and its stiffness, it was a good call on their part.
I used the hinge method, and scotch taped any particles of dust out of the way. My house is pretty dusty so it actually seemed like the hover method might have worked better, ymmv. Once you get it in place, due to its stiffness its actually pretty easy to lift up without worrying about bending the corner.
I got it on there properly aligned, but as you can see in some of the photos there are some spots where the adhesive just didn't seem to want to stick too well. I've had this issue in the past with a few of my SGP protectors, so i would just guess its the silicone adhesive not being completely uniform on the underside. The issue is cosmetic and does not affect the display sensitivity or the quality once the screen is lit.
Heres some photos of the 4 corners after I was done. The cut was very precise and everything lined up perfectly.
Heres a picture of it from profile after installation. I am slightly worried about the fact that it does stick up a bit from the bezel, but given that my friend's Note 2 is pocketed and his is just as thick, there shouldn't be any problems with lifting, especially since I intend on having it in a case when I'm out and about. Something to think about though if you're the kind of user that doesn't like cases ruining the looks of your device.
And finally, I tried my best to take before and after photos of the same screen on max brightness. We all know that trying to take a photo of a screen is usually a futile endeavor in regards to showing distortion of screen protectors, but what the hell here they are for the sake of completeness.
Can you tell which is which? I can't so i guess thats a good thing.
I don't think I've seen many complaints if at all regarding the fact that the screen is too slippery. I know that at this dpi and this smaller screen size typing is more difficult as the already oversensitive screen registers even the tiniest movements as a swipe. This screen protector actually brings that slipperiness down, to about the same as all my other devices naked. Looking forward to using my device more now as I didn't care too much for the super slippery glass. I was in an excited hurry to write up this review as I know there are others that were curious about his product and I'm willing to bet they probably have only a smidge more patience than I.
TL;DR: I was skeptical of this screen protector as I have never heard of nor had any experience with the brand, however I wanted to try something new, and i'm glad it turned out well so far. If i had to give this thing a score, it would have to be a 4.5 out of 5 due to the spots on the screen that didn't quite stick completely and thus introduced some visual artifacts.
PROS:
Thick, the hardness probably won't do much against a drop on the side, but it might protect it better than a dry apply plastic protector and not have the orange peel or rubber feeling of wet apply protectors.
Easy to install: The stiffness makes installation via the hinge method a breeze. Lifting corners to get rid of dust after you get it aligned is also painless as theres little risk of bending it like with plasic protectors.
More scratch resistant? I didn't want to try it with a key test, but i'm hoping given its 8H rating that it will maintain its pristine appearence longer than my SGPs, which admittedly scratch when you breathe on them.
Its glass, you're basically putting another screen on top of your screen, thats like strapping another car in front of your car to protect its front.
CONS:
Price: when I bought this on amazon it was 20 bucks, it has since gone up to 25. Last time i checked the SGP crystal clear is priced at 13 per piece on their website. This is almost twice the price, but if it lasts through the life of 2 SGPs and still looks awesome, its totally worth it.
Thick: Its primary strength may prove to be a weakness. The screen protector MAY be subject to lateral forces which may start to lift it, time will tell.
Doesn't stick perfectly at some places: This could be my fault for having lifted it a few times to pick up dust, or it could be its too stiff and doesn't want to conform, or less than perfect adhesive application at the factory. Whosever fault it is, the problem is cosmetic and in no way affects the operation of the N7.
Not prime eligible: Not really a knock on the product itself, but i had to wait quite awhile for this.
Having just had a few hours with it, I can say that I would recommend this to any one who wants to try a glass screen protector. They could have priced it more ridiculously, but at the current price point it seems fair for what you're getting.
UPDATE: Those tiny little spots are gone now that ive spent a little bit of time applying regular finger pressure on them for a few minutes.
What case is that? And nice review! Was thinking about getting one myself.
Sent from my GT-I9505G using Tapatalk 4
xsaqzw said:
What case is that? And nice review! Was thinking about getting one myself.
Sent from my GT-I9505G using Tapatalk 4
Click to expand...
Click to collapse
Its a dBrand skin
Nice review. I ordered the same one. Interestingly the mailman just dropped mine off while reading your review Lol. I'll apply mine when I'm off work tomorrow xD
Sent from my Nexus 7 using Tapatalk 2
I also received and applied my i-Blason screen today. I think mine came with a defect on part of it, because there is one bubble that refuses to go away. Its not dust either. I'm super anal about not having bubbles. So I asked i-blason if they can send out a new one as their is a 1 year satisfaction warranty that specifically says it covers bubbles underneath the screen. Other than me being anal about the bubble though, this is a super screen protector and I highly recommend it to anyone.
Sent from my SGH-T999 using XDA Premium 4 mobile app
I just received mine today as well. The install was quick and easy. No bubbles, everything lined up perfect. No loss in touch response either. I would recommend this screen protector.
Sent from my Nexus 7 using xda app-developers app
lacrossev said:
Looking at the screen protector itself I thought there were holes for the camera and the sensors, however it was actually the case that it was actually just thinner at those parts in the back, the front is one continuous piece with no holes in it. This came as a surprise to me as I was expecting holes, but given how thick it is and its stiffness, it was a good call on their part.
Click to expand...
Click to collapse
I know you mentioned it is just thinner in those areas and they aren't actually holes, but I wonder why they all keep doing anything special at all for the notification LED on the clear models. They are putting in extra effort and it makes it worse
I could understand on the anti-glare models. Illumishield got rid of the notification cutout on their latest SP version.
sfhub said:
I know you mentioned it is just thinner in those areas and they aren't actually holes, but I wonder why they all keep doing anything special at all for the notification LED on the clear models. They are putting in extra effort and it makes it worse
I could understand on the anti-glare models. Illumishield got rid of the notification cutout on their latest SP version.
Click to expand...
Click to collapse
Probably so you can see it better. I think it makes sense in this case.
got mine yesterday as well, just installed it. installed pretty cleanly.
so far i love it.
anybody using a case to cover the back of the n7, not a skin per se, but more of back cover/case, which doesn't interfere with the screen protector?
I got a defective one today. Big bubble is under the glass.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
Did you try to pick it back up and pushing down on that spot as you're laying it down? Once the bubble gets trapped its impossible to get out with the squeegee
Sent from my Nexus 7 using Tapatalk 4
lacrossev said:
Hey guys, having been a die-hard fan of SGP ultra crystal screen protectors for all the devices in the home (Evo LTE, One, iPhone 4(s), Asus TF101), I was a little disappointed to learn from another thread here that SGP didn't have plans to bring their tempered glass screen protector to our shiny new N7 FHDs. I had checked out the SGP model on my friend's Note 2 and decided that on my next device i would give one of these a try. Luckily i-Blason came to the rescue with their version of a tempered glass screen protector and here's my review, I hope it will be helpful and perhaps answer some questions.
The protector was packaged in a plastic folder frame and came in a padded envelope. On the inside it had the regular microfiber square, squeegee, and the protector itself in a paper sleeve as well as the protective plastic on both sides.
Immediately I noticed how much thicker and stiffer it was compared to the dry apply plastic ones. I tried to flex it a bit and of course being at that thickness, it did have a small amount of give but overall pretty hard. I tried to get a picture of how thick it is compared to an SGP Ultra Crystal for the HTC One that i had lying around, but the photos don't really illustrate too well the difference between the two. The first is the i-Blason, second is the SGP.
Looking at the screen protector itself I thought there were holes for the camera and the sensors, however it was actually the case that it was actually just thinner at those parts in the back, the front is one continuous piece with no holes in it. This came as a surprise to me as I was expecting holes, but given how thick it is and its stiffness, it was a good call on their part.
I used the hinge method, and scotch taped any particles of dust out of the way. My house is pretty dusty so it actually seemed like the hover method might have worked better, ymmv. Once you get it in place, due to its stiffness its actually pretty easy to lift up without worrying about bending the corner.
I got it on there properly aligned, but as you can see in some of the photos there are some spots where the adhesive just didn't seem to want to stick too well. I've had this issue in the past with a few of my SGP protectors, so i would just guess its the silicone adhesive not being completely uniform on the underside. The issue is cosmetic and does not affect the display sensitivity or the quality once the screen is lit.
Heres some photos of the 4 corners after I was done. The cut was very precise and everything lined up perfectly.
Heres a picture of it from profile after installation. I am slightly worried about the fact that it does stick up a bit from the bezel, but given that my friend's Note 2 is pocketed and his is just as thick, there shouldn't be any problems with lifting, especially since I intend on having it in a case when I'm out and about. Something to think about though if you're the kind of user that doesn't like cases ruining the looks of your device.
And finally, I tried my best to take before and after photos of the same screen on max brightness. We all know that trying to take a photo of a screen is usually a futile endeavor in regards to showing distortion of screen protectors, but what the hell here they are for the sake of completeness.
Can you tell which is which? I can't so i guess thats a good thing.
I don't think I've seen many complaints if at all regarding the fact that the screen is too slippery. I know that at this dpi and this smaller screen size typing is more difficult as the already oversensitive screen registers even the tiniest movements as a swipe. This screen protector actually brings that slipperiness down, to about the same as all my other devices naked. Looking forward to using my device more now as I didn't care too much for the super slippery glass. I was in an excited hurry to write up this review as I know there are others that were curious about his product and I'm willing to bet they probably have only a smidge more patience than I.
TL;DR: I was skeptical of this screen protector as I have never heard of nor had any experience with the brand, however I wanted to try something new, and i'm glad it turned out well so far. If i had to give this thing a score, it would have to be a 4.5 out of 5 due to the spots on the screen that didn't quite stick completely and thus introduced some visual artifacts.
PROS:
Thick, the hardness probably won't do much against a drop on the side, but it might protect it better than a dry apply plastic protector and not have the orange peel or rubber feeling of wet apply protectors.
Easy to install: The stiffness makes installation via the hinge method a breeze. Lifting corners to get rid of dust after you get it aligned is also painless as theres little risk of bending it like with plasic protectors.
More scratch resistant? I didn't want to try it with a key test, but i'm hoping given its 8H rating that it will maintain its pristine appearence longer than my SGPs, which admittedly scratch when you breathe on them.
Its glass, you're basically putting another screen on top of your screen, thats like strapping another car in front of your car to protect its front.
CONS:
Price: when I bought this on amazon it was 20 bucks, it has since gone up to 25. Last time i checked the SGP crystal clear is priced at 13 per piece on their website. This is almost twice the price, but if it lasts through the life of 2 SGPs and still looks awesome, its totally worth it.
Thick: Its primary strength may prove to be a weakness. The screen protector MAY be subject to lateral forces which may start to lift it, time will tell.
Doesn't stick perfectly at some places: This could be my fault for having lifted it a few times to pick up dust, or it could be its too stiff and doesn't want to conform, or less than perfect adhesive application at the factory. Whosever fault it is, the problem is cosmetic and in no way affects the operation of the N7.
Not prime eligible: Not really a knock on the product itself, but i had to wait quite awhile for this.
Having just had a few hours with it, I can say that I would recommend this to any one who wants to try a glass screen protector. They could have priced it more ridiculously, but at the current price point it seems fair for what you're getting.
UPDATE: Those tiny little spots are gone now that ive spent a little bit of time applying regular finger pressure on them for a few minutes.
Click to expand...
Click to collapse
What is that red cover on the back of got Nexus 7?
Hmm, they won't ship to Canada.
foodude1 said:
What is that red cover on the back of got Nexus 7?
Click to expand...
Click to collapse
It's a dBrand skin. There's a thread for it in this section. Please don't quote the entire OP in the future...
I had a pretty large bubble when I applied mine at first. You have to work from the middle out. It is harder to work the bubbles out then compared to a normal screen protector.
Sent from my Nexus 7 using xda app-developers app
Malden said:
I had a pretty large bubble when I applied mine at first. You have to work from the middle out. It is harder to work the bubbles out then compared to a normal screen protector.
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
I am not comfort on the think and no hole at front camera position.
Got the screen protector earlier this week, and finally got around to installing this afternoon. No issues applying, though it's a little skewed from user error. The screen protector is on par with all the other glass SP on my other devices. For my it's just added comfort that the original glass is protected.
I noticed a few "marks" under the screen protector after application. They seemed to be indentations in the adhesive from the factory. Applying fingertip / fingernail pressure to the affected areas for a few seconds seemed to help the silicon stick better and clear the trapped air.
I'm glad they chose not to leave holes in the screen protector. Less area for dirt, dust and lint to collect. The camera doesn't seem to be affected by the layer of glass. The illusion of a "cutout" may just be the lack of silicon adhesive in each area. I highly doubt they took the extra time to grind down each area.
Get this screen protector. You won't be disappointed in the feel and protection.
I've had mine on for over a week I think it's great.
truelies1 said:
I am not comfort on the think and no hole at front camera position.
Click to expand...
Click to collapse
The "hole" by the camera and the notification light are not actually holes. I didn't look closely at the sp before I applied it but I think they are just areas where the glass is thinner so there is no adhesive on those areas or it is a different type of glass. If you rub your finger across where the camera and notification light are it is completely smooth. You don't feel an indentation or anything. So it is just one solid price of tempered glass with no cutouts. It does gives the appearance that there are cutout holes there but there aren't. It does not affect the camera in any way.
Sent from my Nexus 7 using xda app-developers app
My original one ended up shattered when I received it. Emailed the company and they sent a replacement. Just got my new one today. Easy installation. As for the shattered one, I took a knife to it for kicks. No scratches. Definitely worth the money.
Sent from my Nexus 7 using Tapatalk 2
Tempered Armor just launched their Galaxy S3 tempered glass screen protector December 2nd. Saw a review video for their Note 3 protector and absolutely loved it (Link if curious: http://youtu.be/Qzhst5jrBtI). I picked it up the same day it released.
It came in two days ago and of course I install it immediately. At first, I thought great, the adhesive is doing it's thing. Then, once I took the blue plastic cover off, the disappointment set it. At a nearly uniform distance completely around the protector, the adhesive doesn't stick. I had used their packaged microfiber and their packaged isopropyl wipes for the install. Thought cool, maybe it will take a few days. And fast forward to today, it still looks the same.
If anyone has any suggestions, please let me know. I love how it feels; I've always hated those crappy plastic protectors.
I reached out to Tempered Armor via Twitter and got no help other than them claiming it was user error and/ or the alignment is off. I sent them a Dropbox link with pictures of the alignment and they came back with the protector won't work if it is "off a hair".
Here's our Twitter conversation: https://twitter.com/temperedarmor/status/413801200866574336
Here's the Dropbox link: https://www.dropbox.com/sh/i6wur2j57ql99c7/qyw6TAEb_y
So if you are thinking about ordering one, make sure you have a micron microscope to get it aligned correctly.
Meh,
I have had similar problems with SProtectors. I do believe that the glass on most S3's have a slight curve at the outer edge.
Sent from my SCH-I535 using Tapatalk
Whenever I press down on the outside edge, it feels like the glass protector doesn't even try to stick. I feel like the adhesive wasn't properly applied to the protector before shipping.
What really got me was when customer support mentioned if it was "off a hair" it wouldn't sit right. How are you going to sell a screen protector that has a fault tolerance in alignment of a width of a hair?
Typical lack of customer service or care. This why I try to support companies like, Anker, zero lemon, Amazon. They actually care about quality and their customers. As info,
We have 3 galaxy S3 in my home and all have a slight curve downward at the edges.
Sent from my SCH-I535 using Tapatalk
I love tempered glass screen protectors. But why spend that much money on that one. I got mine off Ebay and they look way better than the one posted in the OP. The one I have sticks all the way around.
here's an example of one... (not sure which seller I bought from. it's been a several weeks since I ordered.)
http://www.ebay.com/itm/Premium-Rea...l_Phone_Screen_Protectors&hash=item2c779dd20f
I knew of the owner of the company from my days as an iPhone modder. Thought he would be a bit more "in touch" with the community and more helpful than "nope, you broke it. lalalalala can't hear you".
jack man said:
I love tempered glass screen protectors. But why spend that much money on that one. I got mine off Ebay and they look way better than the one posted in the OP. The one I have sticks all the way around.
here's an example of one... (not sure which seller I bought from. it's been a several weeks since I ordered.)
http://www.ebay.com/itm/Premium-Rea...l_Phone_Screen_Protectors&hash=item2c779dd20f
Click to expand...
Click to collapse
Hi..
I would like to buy one, but 0.4 ones seems to thick as they seem to raise screen level above some cases lips..
Do you have slimmer one or is that one ok ?
schetz said:
Hi..
I would like to buy one, but 0.4 ones seems to thick as they seem to raise screen level above some cases lips..
Do you have slimmer one or is that one ok ?
Click to expand...
Click to collapse
The one I have is .3, so just a bit thinner. on all of the cases I have used, it doesn't interfere with the case. I have used it with the Otterbox Commuter case and it looks fine. Right now, I'm using it with a rubber/plastic case that I found at Walgreen's of all places. There is usually a small gap between the edge of the screen protector and the case. I'll see if I can get a picture up
EDIT
Here's mine with a case and the glass screen on it (sorry pic quality is bad, taken with an Ipad, of course)
https://www.dropbox.com/s/nrwqcb22qfewptv/photo.jpg
jack man said:
The one I have is .3, so just a bit thinner. on all of the cases I have used, it doesn't interfere with the case. I have used it with the Otterbox Commuter case and it looks fine. Right now, I'm using it with a rubber/plastic case that I found at Walgreen's of all places. There is usually a small gap between the edge of the screen protector and the case. I'll see if I can get a picture up
EDIT
Here's mine with a case and the glass screen on it (sorry pic quality is bad, taken with an Ipad, of course)
https://www.dropbox.com/s/nrwqcb22qfewptv/photo.jpg
Click to expand...
Click to collapse
Thanks for pic..i will definitely look for a glass thinner than 0.4..
Whenever i put a screen protector on my s3 the touch screen glitches, key presses al over the screen like whenever i press the app drawer it opens my notification bar, whenever i type something it scrolls up,so does that have anything to do with the quality of the screen protector?
I just got my Nexus 5, my first Nexus phone, and I'm pretty excited about it. Naturally I want to add some protection to it especially since I will likely be going sans-case (at least for use, though I've ordered a leather/wool felt sleeve for it to take refuge in while not in the protection of my hands, which will work well with my Pebble as I don't need to constantly check the phone for notifications). A friend of mine that I talked into impulse buying the N5 ordered the Mime Feather Glass protector after his research. Looking through the threads I could find it looks like a lot of people have had issues with chipping edges on that model, and it sounds like a slew of other issues from other manufacturers like Spigen, and I don't like the extra cutouts on the Nillkin protector (just seems like an extra space for dust to collect and takes away from the sleekness a bit IMO). Anyway it looked like most of those posts originated closer to the launch time of the N5 so I'm wondering if any glass protectors have stood out for quality above the rest over the past couple months?
I know the tempered glass protectors are more expensive, but the feel, look, scratch resistance, and apparently debatable shatter protection of the underlying screen seem to be the best option. I saw the post about the Rhino Shield but the much lower scratch resistance and similar price coupled with the article claiming a ziploc bag offered similar protection deterred me slightly :silly:
tl:dr- looking for a sweet tempered glass screen protector to use without a case, what's the best option (overall/value)
Thanks!
TheBeardedAx said:
I just got my Nexus 5, my first Nexus phone, and I'm pretty excited about it. Naturally I want to add some protection to it especially since I will likely be going sans-case (at least for use, though I've ordered a leather/wool felt sleeve for it to take refuge in while not in the protection of my hands, which will work well with my Pebble as I don't need to constantly check the phone for notifications). A friend of mine that I talked into impulse buying the N5 ordered the Mime Feather Glass protector after his research. Looking through the threads I could find it looks like a lot of people have had issues with chipping edges on that model, and it sounds like a slew of other issues from other manufacturers like Spigen, and I don't like the extra cutouts on the Nillkin protector (just seems like an extra space for dust to collect and takes away from the sleekness a bit IMO). Anyway it looked like most of those posts originated closer to the launch time of the N5 so I'm wondering if any glass protectors have stood out for quality above the rest over the past couple months?
I know the tempered glass protectors are more expensive, but the feel, look, scratch resistance, and apparently debatable shatter protection of the underlying screen seem to be the best option. I saw the post about the Rhino Shield but the much lower scratch resistance and similar price coupled with the article claiming a ziploc bag offered similar protection deterred me slightly :silly:
tl:dr- looking for a sweet tempered glass screen protector to use without a case, what's the best option (overall/value)
Thanks!
Click to expand...
Click to collapse
The Mime feather is my first experience with extremely thin glass protectors. My experience at first was great, but it is starting to fall apart and I'm regretting my purchase. It started with the corners for some reason even though I have the heavy duty ballistic case on the phone. Now I'm getting whole cracks from one side to the other... Not even originating from the corners where it started. I am clueless as to how it happens because I have never dropped my phone.
If you're going to get a glass protector I strongly encourage you to get the non-thin versions. It's not a whole lot thicker and it is less likely to be brittle. I have used several normal thickness glass protectors in the past (Spigen) and was never disappointed in those. So far my experience with MIME is poor, but Spigen has been excellent and that includes their cases.
Thanks. I was tempted buy Iloome's flex glass cause it's on sale right now for $17 but I was thinking the thicker protector might be the way to go.
TheBeardedAx said:
I just got my Nexus 5, my first Nexus phone, and I'm pretty excited about it. Naturally I want to add some protection to it especially since I will likely be going sans-case (at least for use, though I've ordered a leather/wool felt sleeve for it to take refuge in while not in the protection of my hands, which will work well with my Pebble as I don't need to constantly check the phone for notifications). A friend of mine that I talked into impulse buying the N5 ordered the Mime Feather Glass protector after his research. Looking through the threads I could find it looks like a lot of people have had issues with chipping edges on that model, and it sounds like a slew of other issues from other manufacturers like Spigen, and I don't like the extra cutouts on the Nillkin protector (just seems like an extra space for dust to collect and takes away from the sleekness a bit IMO). Anyway it looked like most of those posts originated closer to the launch time of the N5 so I'm wondering if any glass protectors have stood out for quality above the rest over the past couple months?
I know the tempered glass protectors are more expensive, but the feel, look, scratch resistance, and apparently debatable shatter protection of the underlying screen seem to be the best option. I saw the post about the Rhino Shield but the much lower scratch resistance and similar price coupled with the article claiming a ziploc bag offered similar protection deterred me slightly :silly:
tl:dr- looking for a sweet tempered glass screen protector to use without a case, what's the best option (overall/value)
Thanks!
Click to expand...
Click to collapse
I am using MIME Ghost glass protector. It is excellent. I am using my N5 without a case.
psy_spy said:
I am using MIME Ghost glass protector. It is excellent. I am using my N5 without a case.
Click to expand...
Click to collapse
How long have you been using the Ghost? Any issues with peeling/chipping/bubbles?
I enjoy the spigen glastr nano slim. I haven't had any issues since i put it on week ago. I wrote a thread about it.
Sent from my Nexus 5 using Tapatalk
TheBeardedAx said:
How long have you been using the Ghost? Any issues with peeling/chipping/bubbles?
Click to expand...
Click to collapse
I have been using it for 2 weeks. No peeling/chipping issues since it is a bit thicker compared to feather. When I applied it on the phone, I got a very small bubble near the upper left corner. It disappeared after a day. Please read reviews from other mime ghost owners to get a fair idea. I remember seeing a separate thread for mime in the n5 forum.
I've got the spigen glass nano.tr slim (the one with rounded corners) coming the mail. Any tips on applying it? I REALLY get OCD (ADHD) if there's ANY dust or bubbles under the screen, so I have to do it perfectly, since it costs nearly £30.
Any advice on how to do it flawlessly?
I read somewhere about running the shower on hot for 30 mins, then doing it in the bathroom, because the hot air causes the dust to all fall to the ground and isn't flying around - but won't that cause condensation etc to build up on the screen in the seconds before you apply the protector?
Any tips would be greatly appreciated.
paradoxiumwind said:
I've got the spigen glass nano.tr slim (the one with rounded corners) coming the mail. Any tips on applying it? I REALLY get OCD (ADHD) if there's ANY dust or bubbles under the screen, so I have to do it perfectly, since it costs nearly £30.
Any advice on how to do it flawlessly?
I read somewhere about running the shower on hot for 30 mins, then doing it in the bathroom, because the hot air causes the dust to all fall to the ground and isn't flying around - but won't that cause condensation etc to build up on the screen in the seconds before you apply the protector?
Any tips would be greatly appreciated.
Click to expand...
Click to collapse
See my thread. Use the hinge method. I didn't do it in a steamy room, but it went on near flawless. (No dust, but only very slightly off center)
Sent from my Nexus 5 using Tapatalk
I got the xgear glass for nexus 4 and it was great. It save me phone, I drop it on is screen and nothing happens only the tempered glass was broken.
Sent from my Nexus 5 using XDA Premium 4 mobile app
KTT16 said:
See my thread. Use the hinge method. I didn't do it in a steamy room, but it went on near flawless. (No dust, but only very slightly off center)
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Regarding the hinge method, make sure when you close the hinge it falls smack dab center. No having to pull it to slightly center it, etc. The tape itself has some bit of tension so it will pull the screen protector back. I'm like 0.2mm off center and I'm very annoyed. So maybe when you tape the screen protector down, start slightly to the left (assuming you tape the right).
Also if you have access to a clean room, do it there. I regret doing it at home and not staying late at work to use the CDA and cleanroom to properly dust off my screen. A stupid eyelash fell off in the middle of the procedure and I have a freaking eyelash underneath my screen protector. LOL. Good thing it's at the bezel though.
The most effective method imo is the steamed washroom method which gives you lots of chances to get it right and you'll never get any dust or any other particles on your screen.
The cruzerlite glass screen protector is amazing. I need to write up a review on it now and take some pics as I've had it over a week. It honestly feels better than the real n5 screen.
>^.^< Sent From Meow nexus 5
I have the Mime Feather Glass and it works great. I did have to shave the corners of my Ringke case to prevent the screen protector from peeling up on the edges. See post #30 here: http://forum.xda-developers.com/showthread.php?t=2540471
On a side note., the screen protector did crack, from something I did, and Mime sent me a coupon for 50% off a new one.
Sent from my Nexus 5 using Tapatalk
I have a Nillkin protector, looks and feels great. Just wondering how a tempered glass protector fares against drops compared to those shatter proof polyurethane (non glass) screen protectors like Rhino Shield and Zagg Extreme. I know Tempered glass protectors can shatter but those others won't, I’m not worried about that, I’m more concerned about the level of protection they offer. Are glass protectors as good as those other ones at dispersing and dampening impact forces? I've seen a couple of videos on Rhino Shield and they look amazing.
I received the first gen of Spigen's SLIM.t screen protectors in mid-November and have been using it since. Initially, the product was great albeit it still attracted fingerprints. I was highly satisfied and the tempered glass looked and felt amazing (plus I managed to avoid any of the bubbles the majority of early buyers experienced).
But a month after normal use (I don't use a case either, but I'm very careful with my phone) it started chipping on the edges. I never dropped my phone or do anything that would cause damage, but magically out of no where the screen protector started chipping.
Currently today, I have 6 chips around my screen protector (2 at the top, 1 on the right, 3 on the left), and two clear cracks across my phone as well (both stemming from separate chips on the side). I'm not sure how the SPIM.tR Nano performs, but I can tell you that paying over $30 for a screen protector that chips this easily is not a worthwhile investment. Something to be aware of.
Zagg HD shield has no problems
Sent from my Nexus 5 using Tapatalk
KTT16 said:
I enjoy the spigen glastr nano slim. I haven't had any issues since i put it on week ago. I wrote a thread about it.
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
This. Best screen protector I've ever had, a little pricey but I'm glad I bought it.
Sent from my Nexus 5 using Tapatalk
Hey guys, I'm having trouble finding any brand left that sell tempered glass for this phone.
The only one I found is XGear, base on the image I am certain that the designed is by having the adhesive stickers on the bezel/edges only, while the viewable area isn't adhesive. I have used tempered glass of similar design before and it is terrible. Since the adhesive stickers are thin on the edges, its not very durable and can leave gaps or pop out (especially since this is a curved screen), and let water in. It will also cause "rainbow effects" due to the gap between the two glasses. There are Amazon reviews that reflected my concern.
I'm looking for something like this which have the entire surface being clear and able to stick.
Doesn't seem like there are any available, but I wouldn't mind using tempered glass for another phone model that could fit on the Nexus screen, I think that's the best way to go. But I won't receive my Nexus in a few days, then I can see if the screen protector of the Moto X fit inside the Galaxy Nexus screen.
Bought a Nillkin Tempered GLass for my Note 3. Guess what.....after a month, the screen cracked by itself! I'm very sure it was not caused by wrong handling nor impact. All this 9H hype by Nillkin is just bull! Choose another brand!
Well I just decided to order a second i-Blason for the Moto X and put it on the Nexus. Kind of awkward, but it work. Couldn't fully stick because of the curved glass though, but the adhesive is durable enough so I'm not worried.
eksasol said:
Well I just decided to order a second i-Blason for the Moto X and put it on the Nexus. Kind of awkward, but it work. Couldn't fully stick because of the curved glass though, but the adhesive is durable enough so I'm not worried.
Click to expand...
Click to collapse
Was gonna buy the xgear thanks for the insight!
Galaxy Nexus
ROM: SlimKat 4.4.2
funny how purchases get based on "user" reviews. i read all 12, and the bad reviews remind of typical users that don't read directions, don't follow directions and then think if they pitch a fit with the manf and bad mouth the product they'll be redeemed of their stupidity.
dust under the screen or lifts at the curve?
1. poor cleaning prior to affixing
2. repeated removing and reapplying and failing 1.
it cracks? really? it's glass, treat it as such and pay attention to 1 & 2 above.
install tip: align and start from one end. it's not a bumper sticker, do not apply it as such.
dots and rainbow? if turned off and angled just right you can see it. turn it on and they're gone. the rainbow kind of reminded of how some windshields look while wearing polarized sunglasses.
i mostly lurk these forums but couldn't let this go. i've had my xgear tempered glass protector on for 2yrs without issue. i will buy more from them if available and my device doesn't have gorilla glass.
well worth the $30+ i spent at the time, has saved my phone too many times to count.
I'm also looking for a tempered glass that is different from Xgear...
I just installed an xGear Fantom (and just replaced my broken screen), I don't see any rainbow effect. I did notice that the protector at the sides sat flat against the screen, but were it curved it bowed out in the center. Looked clear, but definitely was not flush against the glass. I put a thick sock on the screen and some weight over top of it (a thick heavy hard cover book and a medium sized socket set), and that eliminated the bow and put a massive rainbow bubble into the middle of the screen. I lifted the top right corner of the protector slightly and the bubble moved straight out on it's on. It now sits 100% flat. I don't notice any loss of touch sensibility. As far as I can tell, this is going to work well, and last a loooong time.
Sent from my Galaxy Nexus using XDA Free mobile app
xGear Fantom is expensive to me and it has bad critics. I'm trying to find another alternative although it is to another model of mobile with the similar screen's sizes 135.5 x 67.94 mm and the holes fit well. The Moto X's screen seem too small.
I think only xGear makes a tempered glass protector for the G'nex. Might be able to use one for another model, but I don't think it would work any better and you would have a higher chance of running into poor fitment.
But I do understand what your saying - some G'nex have a sensitivity bug that the xGear exaggerates (I'm lucky I don't), while some people have had problems with the glue giving out as well as sensitivity issues not related to the bug.
I'd think you could run into those issues with any brand of glass screen protectors, and further might run into other issues with fitment if the protector is for a different phone.
I can't say if I'll have adhesion issues (and so far nope - but only been barely a week or so since installing it), though I think I would have both if I had not noticed and taken care to eliminate the slight bulge out where the glass curved.
Mine did lay flat at the sides along the protectors boarder, and while it was clear for viewing the screen (as in it didn't look like I had air trapped under the protector), it was clearly bulged out (due to an air pocket) a few mm in the center of the screen where it naturally curves when viewed from the side - I was able to correct that with the weight and slight lifting of a corner.
Sadly, you may want to run your naked (no protector) or with a PET film protector.
Sent from my LG-D852 using XDA Free mobile app
BTW - I only paid something like $11 (Canadian) for my Fantom, and that includes shipping. I don't think it was a huge expense at all.
Sent from my LG-D852 using XDA Free mobile app
I think it's not necessary to use any kind of screen protection.
I have my GNex more than 2 years without using screen protector and it doesn't have any scratches
I bought a tempered glass protector ( Moto X) to my Samsung Galaxy Nexus
Unfortunately I did not find any that fit perfectly but it work rigth to me.... it was very cheap in aliexpress, only 1,60€ :good: