I flashed over my /kernel by mistake, I still have fastboot but twrp can not boot, I beleive once a full OTA for the bnd-l24 is available I can fix it. What is in the /Kernel partition? OPEN TO ANY SOLUTIONS. If someone could pull their /kernel partition from an emui 8 bnd-l24 or I guess any variant assuming the content is the same, that'd be great!
iGamer77z7 said:
I flashed over my /kernel by mistake, I still have fastboot but twrp can not boot, I beleive once a full OTA for the bnd-l24 is available I can fix it. What is in the /Kernel partition? OPEN TO ANY SOLUTIONS. If someone could pull their /kernel partition from an emui 8 bnd-l24 or I guess any variant assuming the content is the same, that'd be great!
Click to expand...
Click to collapse
You should be able to extract the kernel.img from update.app
It is inside the udpate.zip you flashed to get Oreo
But if you flash wrong , it might get worse
mrmazak said:
You should be able to extract the kernel.img from update.app
It is inside the udpate.zip you flashed to get Oreo
But if you flash wrong , it might get worse
Click to expand...
Click to collapse
I can't find a kernel.img, can you tell me where it would be? I checked both update.apps, do you have a copy? you think since I can not flash the no check recovery I could switch the vendor and go to stock recovery and perfrom an update from a update zip on root of the external sd?
iGamer77z7 said:
I can't find a kernel.img, can you tell me where it would be? I checked both update.apps, do you have a copy? you think since I can not flash the no check recovery I could switch the vendor and go to stock recovery and perfrom an update from a update zip on root of the external sd?
Click to expand...
Click to collapse
it is right where i suggested.
in the update.app from the L22 oreo update.zip
You did say you are on oreo correct.
caution ,sounds like you are trying to flash wrong recovery. As the no check recovery is for nougat
.
mrmazak said:
it is right where i suggested.
in the update.app from the L22 oreo update.zip
You did say you are on oreo correct.
caution ,sounds like you are trying to flash wrong recovery. As the no check recovery is for nougat
.
Click to expand...
Click to collapse
I never got the chance to flash the no check recovery thankfully, I can not extract the update.app it is givng me mismatch errors
iGamer77z7 said:
I never got the chance to flash the no check recovery thankfully, I can not extract the update.app it is givng me mismatch errors
Click to expand...
Click to collapse
There is a setting in the extractor app. And uncheck the verify header, I think it's called.
mrmazak said:
There is a setting in the extractor app. And uncheck the verify header, I think it's called.
Click to expand...
Click to collapse
Okay so I flashed the kernel.img and the ramdisk.img and my phone has gone from dead dead to fixed thank you so much
iGamer77z7 said:
Okay so I flashed the kernel.img and the ramdisk.img and my phone has gone from dead dead to fixed thank you so much
Click to expand...
Click to collapse
can you share kernel.img and ramdisk.img?
Related
Does anyone have a TMO Moto Z2 Force FLASHALL for the lastest OREO build?
I was on Oreo and i was testing a ROM in Devlopement and someone BASEBAND <not found> so i have no WiFi, no signal, but on a good note the ROM booted...
So any with an TMO OREO FlashAll, please share...
Thanks in advance
I haven't been able to find anyone or any place that has the latest TMO flash all available, but here is the update for the previous 8.0 update for TMO:
here
Shiro12 said:
I haven't been able to find anyone or any place that has the latest TMO flash all available, but here is the update for the previous 8.0 update for TMO:
here
Click to expand...
Click to collapse
Thanks but i need the entire build, not just the up date. I lost my MAC and IMEI and the full firmware is my only way of fixing it, i think
AndroidDevices said:
Thanks but i need the entire build, not just the up date. I lost my MAC and IMEI and the full firmware is my only way of fixing it, i think
Click to expand...
Click to collapse
That should be what you need, I came from a test build for Nash and used the FlashAll zip (RET specifically) from that site to take me all the way back to stock., Hence why each zip is ~3GB uncompressed.
Shiro12 said:
That should be what you need, I came from a test build for Nash and used the FlashAll zip (RET specifically) from that site to take me all the way back to stock., Hence why each zip is ~3GB uncompressed.
Click to expand...
Click to collapse
There is no FLASHALL in the file and i cannot get RSD to recognize device is in fastboot mode
extract This into the firmware's folder and adapt the bat file as needed
Shiro12 said:
extract This into the firmware's folder and adapt the bat file as needed
Click to expand...
Click to collapse
Thanks, flashed and still no baseband... wtf
AndroidDevices said:
Thanks, flashed and still no baseband... wtf
Click to expand...
Click to collapse
There should be a NON_HLOS.bin in that folder, if im not mistaken a fastboot command posted here should fix that, but i should mention that i have not done this myself and can not vouch for it. maybe someone else has a more (for a lack of a better word) trusted way to fix your issue
Shiro12 said:
There should be a NON_HLOS.bin in that folder, if im not mistaken a fastboot command posted here should fix that, but i should mention that i have not done this myself and can not vouch for it. maybe someone else has a more (for a lack of a better word) trusted way to fix your issue
Click to expand...
Click to collapse
I'm having the same issue. I've downloaded every 2+gb zipped XT1789-04 factory reset zip I can get my hands on. It says it's flashing a modem, but I still get no baseband when I go into fastboot. no wifi or cell signal. I've tried the commands linked above after flashing. If someone has a solution I'd be eternally grateful.
Shiro12 said:
There should be a NON_HLOS.bin in that folder, if im not mistaken a fastboot command posted here should fix that, but i should mention that i have not done this myself and can not vouch for it. maybe someone else has a more (for a lack of a better word) trusted way to fix your issue
Click to expand...
Click to collapse
Thanks but NO GO .
I ran into this problem attempting to root the latest Oreo OCX27.1 and got into a bootloop. The only Oreo firmware available to download isis the previous OCX27 and I believe that downgrading to that causes the lost of baseband and imei. I am waiting to see when OCX27.1 will be available to download so I can try to return to stock to 27.1 see if it restores my baseband
The problem i am seeing is that none of the stock firmware are for ocx27.1. they are all for ocx27. i have seen an ota update that is for the ocx27.1 but i have not figured out how to extract it yet
mattlowry said:
The problem i am seeing is that none of the stock firmware are for ocx27.1. they are all for ocx27. i have seen an ota update that is for the ocx27.1 but i have not figured out how to extract it yet
Click to expand...
Click to collapse
https://forum.xda-developers.com/z2-force/help/tmo-oxc27-1-oreo-firmware-t3757469
droidgreg said:
https://forum.xda-developers.com/z2-force/help/tmo-oxc27-1-oreo-firmware-t3757469
Click to expand...
Click to collapse
thats the ota. if you know of a way to extract the contents of the rom for that file i would love to hear it
mattlowry said:
thats the ota. if you know of a way to extract the contents of the rom for that file i would love to hear it
Click to expand...
Click to collapse
Open the file win Winrar or any Zip program and you should be able to extract the contents
droidgreg said:
Open the file win Winrar or any Zip program and you should be able to extract the contents
Click to expand...
Click to collapse
not exactly what im looking for. all of the rom contents are loaded in the payload.bin file. That is the file we need extracted
mattlowry said:
not exactly what im looking for. all of the rom contents are loaded in the payload.bin file. That is the file we need extracted
Click to expand...
Click to collapse
I tried daemon tools lite and PowerISO but both failed to extract the bin file. I'll keep looking...
droidgreg said:
I tried daemon tools lite and PowerISO but both failed to extract the bin file. I'll keep looking...
Click to expand...
Click to collapse
from what i have seen there is not a way to extract it currently
I'm gonna mess with it in linux. I'm no dev but I'll see what I can pull apart, hopefully I find something useful.
https://drive.google.com/file/d/13pKSMS5zGuYsr1EEDma0L6AxHDSUmu2g/view?usp=drivesdk
i had flashed the openkirin rros image...without installing twrp or magisk...as it was stated on their page...i need to restore my phone to stock emui 8... how do i do that? some say by dload method...i downloaded fullota-mf there is no dload folder...any help would be appreciated
dsmith16 said:
i had flashed the openkirin rros image...without installing twrp or magisk...as it was stated on their page...i need to restore my phone to stock emui 8... how do i do that? some say by dload method...i downloaded fullota-mf there is no dload folder...any help would be appreciated
Click to expand...
Click to collapse
Same here bud. There seems to be no forums on this topic. If i may ask does your bootloder show green on frp lock?
dsmith16 said:
i had flashed the openkirin rros image...without installing twrp or magisk...as it was stated on their page...i need to restore my phone to stock emui 8... how do i do that? some say by dload method...i downloaded fullota-mf there is no dload folder...any help would be appreciated
Click to expand...
Click to collapse
Did you check the support page?
You can extract the system.img file from the update. APP file then flash it from fastboot: fastboot flash system system.img
https://openkirin.net/user_guide/how-to-extract-partition-images-from-stock-emui-firmware/
hey happy new year guys i searched alot but no luck , i downloaded recovery stock rom 10.0.17.0 from here
https://mirom.ezbox.idv.tw/en/phone/daisy/roms-global-stable/
but when i try to flash it from recovery i get an error what is proper way to install it (knowing that i'm on 10.0.3.0 ) please asap ??
If I'm not mistaken, I think that the link you provided is to a file that will contain a payload.bin, which would also need to be extracted. Maybe try from this link and extract the tgz & tar file to gain access to flash_all.bat/images.
I also had errors trying to flash the image as well but the path to the flash file was long (N:\Android\Xiaomi\Images\daisy_global_images_V10.0.17.0.PDLMIXM_9.0-2). When I simply moved the folder to the N drive it worked beautifully (N:\daisy_global_images_V10.0.17.0.PDLMIXM_9.0-2).
Hope that helps & good luck!
farrouk said:
hey happy new year guys i searched alot but no luck , i downloaded recovery stock rom 10.0.17.0 from here
https://mirom.ezbox.idv.tw/en/phone/daisy/roms-global-stable/
but when i try to flash it from recovery i get an error what is proper way to install it (knowing that i'm on 10.0.3.0 ) please asap ??
Click to expand...
Click to collapse
To install that, maybe TWRP can do it?
Else you will need to extract the images from payload.bin (use payload dumper) and flash each image using fastboot.
Probably flash them to the other slot and then change active slot. But you won't need to do that since you're flashing from fastboot.
a1291762 said:
To install that, maybe TWRP can do it?
Else you will need to extract the images from payload.bin (use payload dumper) and flash each image using fastboot.
Probably flash them to the other slot and then change active slot. But you won't need to do that since you're flashing from fastboot.
Click to expand...
Click to collapse
twrp doesnt do it and payload dumper seems alot of work it's okay i found fastboot rom of 10.0.17.0 , anyway my trouble now is what is the proper way to install magisk and twrp along side ? please
farrouk said:
twrp doesnt do it and payload dumper seems alot of work it's okay i found fastboot rom of 10.0.17.0 , anyway my trouble now is what is the proper way to install magisk and twrp along side ? please
Click to expand...
Click to collapse
I followed this using offain's TWRP. Rather than pushing the files with adb, I had them loaded on my sd card. Just follow the guide & you'll be good.
Link not working - remove spaces below:
https://www.the custom droid .com/install-twrp-recovery-root-xiaomi-mi-a2-a2-lite/
mn1968 said:
I followed this using offain's TWRP. Rather than pushing the files with adb, I had them loaded on my sd card. Just follow the guide & you'll be good.
Link not working - remove spaces below:
https://www.the custom droid .com/install-twrp-recovery-root-xiaomi-mi-a2-a2-lite/
Click to expand...
Click to collapse
thnx i'll give it a try and feedback
Hey guys, more and more Roms are coming out for our beloved OnePlus 9 pro. I had a 6 and 7tp before and there were stock oos Roms, which you could easily flash via Fastboot and have OOS back.
It's just more convenient to simply have one file instead of flashing all images and so on
It'll be so great if any developer could try to create one, since it shouldn't be so difficult (at least that's what I guess haha)
I created one (11.2.7.7.BA), it should work, but need testers. Ofc, Use it on your own Risk, but we have MSM Tool
Test_EU_11.2.7.7.zip
drive.google.com
Extract the Zip and Run "Flasher"
Sconny said:
I created one (11.2.7.7.BA), it should work, but need testers. Ofc, Use it on your own Risk, but we have MSM Tool
Test_EU_11.2.7.7.zip
drive.google.com
Extract the Zip and Run "Flasher"
Click to expand...
Click to collapse
thanks for this bro much appreciated
fastboot -w not correct work
d:\Software_Tools\Multimedia\Handy-Taplet\Handy\Backup\Download\Rom\Payload Dumper 64 bit\payload_output>fastboot -w
Erasing 'userdata' OKAY [ 1.960s]
CreateProcess failed: Das System kann die angegebene Datei nicht finden. (2)
fastboot: error: Cannot generate image for userdata
I owe you a beer Sconny, you brought me back from the brink! I didn't exactly use all of your files, so I'm not sure if I count as a tester, but I was able to use your fastboot commands from Flasher.bat and turn that into a shell script. I ran it not really knowing it was going to work, so I ended up not wiping beforehand but it looks like it turned out fine. Oh and I didn't use your zip, used my own and dumped the payload myself. Thanks again Sconny!
Sconny said:
I created one (11.2.7.7.BA), it should work, but need testers. Ofc, Use it on your own Risk, but we have MSM Tool
Test_EU_11.2.7.7.zip
drive.google.com
Extract the Zip and Run "Flasher"
Click to expand...
Click to collapse
Tested and it worked for me as well other than shows the same userdata wipe error as mentioned. Curious to ask if you could make a flashable zip to include just the latest firmware?
erad1 said:
Tested and it worked for me as well other than shows the same userdata wipe error as mentioned. Curious to ask if you could make a flashable zip to include just the latest firmware?
Click to expand...
Click to collapse
Maybe I should implement another command or manual wiping should work. Isn't that the latest FW?
Sconny said:
Maybe I should implement another command or manual wiping should work. Isn't that the latest FW?
Click to expand...
Click to collapse
yep that is the latest
Sconny said:
Maybe I should implement another command or manual wiping should work. Isn't that the latest FW?
Click to expand...
Click to collapse
Yes but for flashing custom Roms you only need need some of the images flashed to the other slot prior to flashing the custom ROM zip. The system IMG and vendor IMG and some others are not needed. Comes in handy when moving from one custom ROM to another.
https://t.me/havoc_oneplus8/23372
This is an example of it for OnePlus 8...
erad1 said:
Yes but for flashing custom Roms you only need need some of the images flashed to the other slot prior to flashing the custom ROM zip. The system IMG and vendor IMG and some others are not needed. Comes in handy when moving from one custom ROM to another.
Click to expand...
Click to collapse
erad1 said:
https://t.me/havoc_oneplus8/23372
This is an example of it for OnePlus 8...
Click to expand...
Click to collapse
Never mind though as this was inaccurate on my part, vendor img is needed...my bad. This method just lets you flash to latest fw after you're already on a custom rom. So to say if a newer fw came out after you could update to it.
I will take a look on it when I've got more time, sorry guys. I need to test it on myself in order to provide this variant of restoring our devices, but I'm working much as hell atm and family stuff etc. Is more important. But I promise I will try to provide a fully functional package for all versions. System, ODM and Vendor is still buggy, but I have some ideas how to fix it
do u think this could work for AA?
Libra420T said:
do u think this could work for AA?
Click to expand...
Click to collapse
There should be the same bug with wiping. But I have an idea, I gonna download AA and will upload here. 1 hour needed
Uploading right now.
Here is the AA Version. Wipe Manually, i have to figure out why its not working, for me it does (Maybe cable, usb port?)
I am not a Developer, i'm just doing this for fun and testing when i have time. As always, use at your own risk.
I disabled Verity for the 3 Partitions, maybe that will help. If you guys have some Ideas, please let me know.
Once it is working flawlessly, i will create a thread and update the "tool" for BA/AA/DA Devices.
Test2_AA_11.2.7.7.zip
drive.google.com
Gonna update to 11.2.8.8 soon, all versions. Waiting for all zips to download
Sconny said:
Gonna update to 11.2.8.8 soon, all versions. Waiting for all zips to download
Click to expand...
Click to collapse
I'm rooted on T-Mobile stock 11.2.5.5 would I be able to flash 11.2.8.8 via fastboot? Or would I need to convert to EU first?
Pain-N-Panic said:
I'm rooted on T-Mobile stock 11.2.5.5 would I be able to flash 11.2.8.8 via fastboot? Or would I need to convert to EU first?
Click to expand...
Click to collapse
Just follow the tutorial in this forum
CN OTA Firmware - KLEN2105310CN00DRX JoyUI2.5
KLEN2106230CN00MR0.zip
drive.google.com
Someone can unzip payload.bin ?
get it yourself, https://forum.xda-developers.com/t/guide-get-official-ota-download-link.4312787/
wertus33333 said:
自己動手，https://forum.xda-developers.com/t/guide-get-official-ota-download-link.4312787
Click to expand...
Click to collapse
The phone cannot start now
s22884513 said:
現在手機無法開機
Click to expand...
Click to collapse
**** sry, the update in the thread seems to be broken :S. try booting to bootloader and switching slot "fastboot --set-active=a" or "fastboot --set-active=b" one of the slots should still contain your old system which booted. Then do the update with KLEN2009280cn00mq3 (which i am uploading right now, can take some time...) like in the thread. This update works, i am using it right now on my phone.
wertus33333 said:
**** sry, the update in the thread seems to be broken :S. try booting to bootloader and switching slot "fastboot --set-active=a" or "fastboot --set-active=b" one of the slots should still contain your old system which booted. Then do the update with KLEN2009280cn00mq3 (which i am uploading right now, can take some time...) like in the thread. This update works, i am using it right now on my phone.
Click to expand...
Click to collapse
Tried but couldn't succeed ；(
Have you updated to 12.5?
no, only 12. did never get a new update and i have a lot of data on my phone ^^'
s22884513 said:
Tried but couldn't succeed ；(
Have you updated to 12.5?
Click to expand...
Click to collapse
what did you do exactly?
12.5 Downgrade 12
wertus33333 said:
what did you do exactly?
Click to expand...
Click to collapse
s22884513 said:
CN OTA Firmware - KLEN2107141CN00MR0 JoyUI2.5
KLEN2106230CN00MR0.zip
drive.google.com
Someone can unzip payload.bin ?
Click to expand...
Click to collapse
what do you need from payload.bin
kevin mitnick said:
what do you need from payload.bin
Click to expand...
Click to collapse
radio.img IMEI is currently missing
s22884513 said:
radio.img IMEI is currently missing
Click to expand...
Click to collapse
radio img means modem.img, right ?
here is this
-https://drive.google.com/file/d/1UVMEnNLMouqFUyVxNP8z-5iz-vn_T2O-/view?usp=sharing-
i'd extracted payload.bin..
i used this tutorial
[Guide] How to extract payload.bin from OTA
This is guide for extract payload.bin from OTA zip file ----------------- Pre-requirement: - Python3 ----------------- For extract OTA update Please flow step by step instruction Step 1: Get a OTA for Nokia 7 plus -> here Step 2: Download...
forum.xda-developers.com
----edit----
for next time, may you need backup modem or radio image from your device before modifiying. you can use partition backup application from play store..
s22884513 said:
CN OTA Firmware - KLEN2107141CN00MR0 JoyUI2.5
KLEN2106230CN00MR0.zip
drive.google.com
Someone can unzip payload.bin ?
Click to expand...
Click to collapse
link that you provide is not MR0..that rom is KLEN2105310CN00DRX, beta version..
s22884513 said:
radio.img IMEI is currently missing
Click to expand...
Click to collapse
kevin mitnick said:
link that you provide is not MR0..that rom is KLEN2105310CN00DRX, beta version..
Click to expand...
Click to collapse
Does he belong to JOY12.5?
s22884513 said:
Does he belong to JOY12.5?
Click to expand...
Click to collapse
yup..it is joyui 12.5..
s22884513 said:
CN OTA Firmware - KLEN2105310CN00DRX JoyUI2.5
KLEN2106230CN00MR0.zip
drive.google.com
Someone can unzip payload.bin ?
Click to expand...
Click to collapse
my bs 3 got bootloop after revert to MQ3 from rom that link above..since I know that rom actually only beta dev rom, I revert back.
I did flashed qfil global rom and CN rom, change slot a, slot b, but nothing. now my bs 3 only bootloop.