Does anyone have a TMO Moto Z2 Force FLASHALL for the lastest OREO build?
I was on Oreo and i was testing a ROM in Devlopement and someone BASEBAND <not found> so i have no WiFi, no signal, but on a good note the ROM booted...
So any with an TMO OREO FlashAll, please share...
Thanks in advance
I haven't been able to find anyone or any place that has the latest TMO flash all available, but here is the update for the previous 8.0 update for TMO:
here
Shiro12 said:
I haven't been able to find anyone or any place that has the latest TMO flash all available, but here is the update for the previous 8.0 update for TMO:
here
Click to expand...
Click to collapse
Thanks but i need the entire build, not just the up date. I lost my MAC and IMEI and the full firmware is my only way of fixing it, i think
AndroidDevices said:
Thanks but i need the entire build, not just the up date. I lost my MAC and IMEI and the full firmware is my only way of fixing it, i think
Click to expand...
Click to collapse
That should be what you need, I came from a test build for Nash and used the FlashAll zip (RET specifically) from that site to take me all the way back to stock., Hence why each zip is ~3GB uncompressed.
Shiro12 said:
That should be what you need, I came from a test build for Nash and used the FlashAll zip (RET specifically) from that site to take me all the way back to stock., Hence why each zip is ~3GB uncompressed.
Click to expand...
Click to collapse
There is no FLASHALL in the file and i cannot get RSD to recognize device is in fastboot mode
extract This into the firmware's folder and adapt the bat file as needed
Shiro12 said:
extract This into the firmware's folder and adapt the bat file as needed
Click to expand...
Click to collapse
Thanks, flashed and still no baseband... wtf
AndroidDevices said:
Thanks, flashed and still no baseband... wtf
Click to expand...
Click to collapse
There should be a NON_HLOS.bin in that folder, if im not mistaken a fastboot command posted here should fix that, but i should mention that i have not done this myself and can not vouch for it. maybe someone else has a more (for a lack of a better word) trusted way to fix your issue
Shiro12 said:
There should be a NON_HLOS.bin in that folder, if im not mistaken a fastboot command posted here should fix that, but i should mention that i have not done this myself and can not vouch for it. maybe someone else has a more (for a lack of a better word) trusted way to fix your issue
Click to expand...
Click to collapse
I'm having the same issue. I've downloaded every 2+gb zipped XT1789-04 factory reset zip I can get my hands on. It says it's flashing a modem, but I still get no baseband when I go into fastboot. no wifi or cell signal. I've tried the commands linked above after flashing. If someone has a solution I'd be eternally grateful.
Shiro12 said:
There should be a NON_HLOS.bin in that folder, if im not mistaken a fastboot command posted here should fix that, but i should mention that i have not done this myself and can not vouch for it. maybe someone else has a more (for a lack of a better word) trusted way to fix your issue
Click to expand...
Click to collapse
Thanks but NO GO .
I ran into this problem attempting to root the latest Oreo OCX27.1 and got into a bootloop. The only Oreo firmware available to download isis the previous OCX27 and I believe that downgrading to that causes the lost of baseband and imei. I am waiting to see when OCX27.1 will be available to download so I can try to return to stock to 27.1 see if it restores my baseband
The problem i am seeing is that none of the stock firmware are for ocx27.1. they are all for ocx27. i have seen an ota update that is for the ocx27.1 but i have not figured out how to extract it yet
mattlowry said:
The problem i am seeing is that none of the stock firmware are for ocx27.1. they are all for ocx27. i have seen an ota update that is for the ocx27.1 but i have not figured out how to extract it yet
Click to expand...
Click to collapse
https://forum.xda-developers.com/z2-force/help/tmo-oxc27-1-oreo-firmware-t3757469
droidgreg said:
https://forum.xda-developers.com/z2-force/help/tmo-oxc27-1-oreo-firmware-t3757469
Click to expand...
Click to collapse
thats the ota. if you know of a way to extract the contents of the rom for that file i would love to hear it
mattlowry said:
thats the ota. if you know of a way to extract the contents of the rom for that file i would love to hear it
Click to expand...
Click to collapse
Open the file win Winrar or any Zip program and you should be able to extract the contents
droidgreg said:
Open the file win Winrar or any Zip program and you should be able to extract the contents
Click to expand...
Click to collapse
not exactly what im looking for. all of the rom contents are loaded in the payload.bin file. That is the file we need extracted
mattlowry said:
not exactly what im looking for. all of the rom contents are loaded in the payload.bin file. That is the file we need extracted
Click to expand...
Click to collapse
I tried daemon tools lite and PowerISO but both failed to extract the bin file. I'll keep looking...
droidgreg said:
I tried daemon tools lite and PowerISO but both failed to extract the bin file. I'll keep looking...
Click to expand...
Click to collapse
from what i have seen there is not a way to extract it currently
I'm gonna mess with it in linux. I'm no dev but I'll see what I can pull apart, hopefully I find something useful.
https://drive.google.com/file/d/13pKSMS5zGuYsr1EEDma0L6AxHDSUmu2g/view?usp=drivesdk
Related
Hey guys,
Rooted unlocked stock 4.1.1. (JRO030)
Looking to upgrade. Downlaoded the install .zip but I'm getting a failure. Based on the recovery log I'm pretty certain it has to do with the manual upgrade I did earlier to get the 4.2 camera with photosphere working on my Nexus.
Any ideas how I can downgrade the camera first? I can't find the APK anywhere.
Parafly said:
Hey guys,
Rooted unlocked stock 4.1.1. (JRO030)
Looking to upgrade. Downlaoded the install .zip but I'm getting a failure. Based on the recovery log I'm pretty certain it has to do with the manual upgrade I did earlier to get the 4.2 camera with photosphere working on my Nexus.
Any ideas how I can downgrade the camera first? I can't find the APK anywhere.
Click to expand...
Click to collapse
Since you're unlocked and stock, download the factory image and flash the system image ONLY via fastboot.
Sent from my Galaxy Nexus using xda premium
Thanks - how do I flash the system image only? I actually haven't used fastboot in a while.
Parafly said:
Thanks - how do I flash the system image only? I actually haven't used fastboot in a while.
Click to expand...
Click to collapse
fastboot flash system system.img
done.
do I need to copy part of the 4.2.2 zip file somewhere first? Right now I just have the full (zipped) download in the download folder of my gnex.
I guess I'm wondering, where do I get system.img and where do I place it so I can load it via fastboot?
Parafly said:
do I need to copy part of the 4.2.2 zip file somewhere first? Right now I just have the full (zipped) download in the download folder of my gnex
Click to expand...
Click to collapse
if you downloaded the image from google,
untar the image
there should be a zip after you untar it, which will have the system.img in it.
Thanks ... very helpful, now i just need to know where to put the system.img? DOes it go into the same directotry where platform-tools is?
Parafly said:
Thanks ... very helpful, now i just need to know where to put the system.img? DOes it go into the same directotry where platform-tools is?
Click to expand...
Click to collapse
where ever your fastboot.exe is
Hmm the file came as a .zip not a .tar
5939ff985946.signed-mysid-JDQ39-from-JRO03O.5939ff98.zip
I unzipped that and I see
folders (META-INF, patch, recovery, system) and two radio images. Did a search and couldn't find system.img in there.
Copied the full directory to where fastboot is and did the dir *.img in command prompt also didn't find any files.
Parafly said:
Hmm the file came as a .zip not a .tar
5939ff985946.signed-mysid-JDQ39-from-JRO03O.5939ff98.zip
I unzipped that and I see
folders (META-INF, patch, recovery, system) and two radio images. Did a search and couldn't find system.img in there.
Copied the full directory to where fastboot is and did the dir *.img in command prompt also didn't find any files.
Click to expand...
Click to collapse
that is from a OTA zip.
you need the full factory image from here: https://developers.google.com/android/nexus/images
Ah got it - thanks. They haven't put 4.2.2 up there yet for VZW as far as I can see. Can I use the 4.1.1 to somehow flash over just the gallery? Will writing system.img do that?
Parafly said:
Ah got it - thanks. They haven't put 4.2.2 up there yet for VZW as far as I can see. Can I use the 4.1.1 to somehow flash over just the gallery? Will writing system.img do that?
Click to expand...
Click to collapse
yes.
Parafly said:
Ah got it - thanks. They haven't put 4.2.2 up there yet for VZW as far as I can see. Can I use the 4.1.1 to somehow flash over just the gallery? Will writing system.img do that?
Click to expand...
Click to collapse
That's exactly what it will do hence why you were told to do that.
^ Sorry on the confusion, I thought he was telling me to get 4.2.2 that way. I understand now. Thanks.
Parafly said:
^ Sorry on the confusion, I thought he was telling me to get 4.2.2 that way. I understand now. Thanks.
Click to expand...
Click to collapse
considering you never mentioned you were using a toro device until just recently...
if you had a maguro device, my instructions were correct.
since you have a toro device, you need factory 4.1.1 and then apply the OTA.
Zepius said:
considering you never mentioned you were using a toro device until just recently...
if you had a maguro device, my instructions were correct.
since you have a toro device, you need factory 4.1.1 and then apply the OTA.
Click to expand...
Click to collapse
You are right I neglected to mention it. Thanks, going to give this a whirl now.
I am now a happy camper on 4.2.2.
Thanks!:good:
Parafly said:
I am now a happy camper on 4.2.2.
Thanks!:good:
Click to expand...
Click to collapse
good deal. glad you got it working.
Please read forum rules before posting
Questions and help issues go in Q&A
Thread moved
Thank you for your cooperation
Friendly Neighborhood Moderator
Hi all,
Over on Android Forums a thread has posted claiming Keis/OTA is downloading a new version of the Stock ROM. Version NJ3? Has anyone here seen this?
Yes my wife got it last week.
Any benefit seen? Or is it more a bloatware update?
She hasn't noticed anything. Hard for her to tell really not knowing anything lol
Has anyone had a chance to grab this updated tar? I am on full CM11, I will give it a go via Keis for PC if it would still attempt to download. I know it won't actually work not being stock.
vsanch24 said:
Has anyone had a chance to grab this updated tar? I am on full CM11, I will give it a go via Keis for PC if it would still attempt to download. I know it won't actually work not being stock.
Click to expand...
Click to collapse
im checking this link out http://opensource.samsung.com/reception/receptionSub.do?method=sub&sub=F&searchValue=sph-l710
6th_Hokage said:
im checking this link out http://opensource.samsung.com/reception/receptionSub.do?method=sub&sub=F&searchValue=sph-l710
Click to expand...
Click to collapse
Interesting, I downloaded the NJ3 (in the middle of the list) but not sure how at apply it. Do you have any ideas? Or do we just change the .zip to a .tar and ODIN will work its' magic?
vsanch24 said:
Interesting, I downloaded the NJ3 (in the middle of the list) but not sure how at apply it. Do you have any ideas? Or do we just change the .zip to a .tar and ODIN will work its' magic?
Click to expand...
Click to collapse
i just checked it out.....it's not the actual update unfortunately open the zip and you'll see what i mean
That's the source code for the updated kernel. It doesn't contain any platform binaries
CNexus said:
That's the source code for the updated kernel. It doesn't contain any platform binaries
Click to expand...
Click to collapse
it has a folder in it called platform tho but when you read the Platform_read_me.txt file thing it says it's for making modules but that you have to download the module stuff separately...
You won't get anything from that file in terms of getting a rom going, trust me.
The most you could do is build the kernel zImage, but you're even limited in that because you'd need the updated boot.img for repacking your compiled zImage.
CNexus said:
You won't get anything from that file in terms of getting a rom going, trust me.
The most you could do is build the kernel zImage, but you're even limited in that because you'd need the updated boot.img for repacking your compiled zImage.
Click to expand...
Click to collapse
i see thats good info thank you
Anyone have luck grabbing the full updated rom? I tried with kies but this happened: (from a post I did on Android Forums)
... I think something has changed as now there is a small program that downloads into the temp folder. Once that finishes it asks for elevated permissions and then starts a new direct download to the phone while it is attached. I am guessing they got wind of these instructions and changed their kies upgrade method.....
I have downloaded the lollipop update in which dlpkgfile is download along with few other, as I have goggled and searched so I know that dlpkgfile is a zip file but when I am trying to open with winrar or 7zip it return a error and I am not able to open it.
Can any one help me with it?
Where do you got that from ?
Maybe it's better to start with a KDZ and extract it if you want to mess with it.
raptor2003 said:
Where do you got that from ?
Maybe it's better to start with a KDZ and extract it if you want to mess with it.
Click to expand...
Click to collapse
When I download lollipop update that file is present in cache
And what to you want to do with it? It's not a full rom, it's just an update.
raptor2003 said:
And what to you want to do with it? It's not a full rom, it's just an update.
Click to expand...
Click to collapse
I know it is just a update but with in that file stock recovery and stock boot.img is present with some other useful data
Simple question
The August radio included in the developer image is horrible! Lots of battery life wasted.
Sent from my Pixel XL using Tapatalk
abuttino said:
Simple question
The August radio included in the developer image is horrible! Lots of battery life wasted.
Click to expand...
Click to collapse
You can flash any radio you want. I'm currently running DP3 radio and modem. The May update radio is also really good for me.
Golf c said:
You can flash any radio you want. I'm currently running DP3 radio and modem. The May update radio is also really good for me.
Click to expand...
Click to collapse
Do you just download the full file and extract the radio file and push through ADB or is there separate .zip files to flash? Thanks
john7760 said:
Do you just download the full file and extract the radio file and push through ADB or is there separate .zip files to flash? Thanks
Click to expand...
Click to collapse
Download the full file and extract the radio and modem. I do both. I don't know if that's necessary but it makes me feel better. I fastboot it.
fastboot flash radio -- slot all radio.img
Golf c said:
Download the full file and extract the radio and modem. I do both. I don't know if that's necessary but it makes me feel better. I fastboot it.
fastboot flash radio -- slot all radio.img
Click to expand...
Click to collapse
I've flashed the boot to a & b to be able to sideload, but i'm not sure on the command for "slot all" to use. Is it the same? I've been less that impressed with the last couple of radio/modem's as far as signal goes for me in my area.
john7760 said:
I've flashed the boot to a & b to be able to sideload, but i'm not sure on the command for "slot all" to use. Is it the same? I've been less that impressed with the last couple of radio/modem's as far as signal goes for me in my area.
Click to expand...
Click to collapse
Radios are really hit and miss For me too. Im on tmobile and the tmobile radios have been horrible for me. The May update radio has been the best. The slot all fastboot command is just one command instead of three commands.
Where are you guys getting the radios from? I can't find any of the new ones, because all of the threads that I have found on here have not been updated in a while.
Probably a stupid one to ask, but does flashing the vendor image update the modem?
Thanks!
bigal1542 said:
Where are you guys getting the radios from? I can't find any of the new ones, because all of the threads that I have found on here have not been updated in a while.
Probably a stupid one to ask, but does flashing the vendor image update the modem?
Thanks!
Click to expand...
Click to collapse
We are extracting them from the Google factory images
Golf c said:
We are extracting them from the Google factory images
Click to expand...
Click to collapse
Hi , can you just upload this radios and modem files ?
i search a lot in this forum and cant find any radios or modem updates ....
thanks
daniking said:
Hi , can you just upload this radios and modem files ?
i search a lot in this forum and cant find any radios or modem updates ....
thanks
Click to expand...
Click to collapse
.
They are found within googles factory images. From google site download image that contains radio you want, unzip it and you will find radio and modem images.
I'm on stock vzw, 8.0, locked bootloader..... Can I flash the radio & modem from the 8.1 preview? If so would I need to flash anything else (bootloader, etc....)?
TIA
TheCelt said:
I'm on stock vzw, 8.0, locked bootloader..... Can I flash the radio & modem from the 8.1 preview? If so would I need to flash anything else (bootloader, etc....)?
TIA
Click to expand...
Click to collapse
You can't flash anything with a locked bootloader
Born<ICs said:
.
They are found within googles factory images. From google site download image that contains radio you want, unzip it and you will find radio and modem images.
Click to expand...
Click to collapse
Thanks. But can you just give me a link of that?
daniking said:
Thanks. But can you just give me a link of that?
Click to expand...
Click to collapse
. Factory images.
https://developers.google.com/android/images#marlin
Hey guys, more and more Roms are coming out for our beloved OnePlus 9 pro. I had a 6 and 7tp before and there were stock oos Roms, which you could easily flash via Fastboot and have OOS back.
It's just more convenient to simply have one file instead of flashing all images and so on
It'll be so great if any developer could try to create one, since it shouldn't be so difficult (at least that's what I guess haha)
I created one (11.2.7.7.BA), it should work, but need testers. Ofc, Use it on your own Risk, but we have MSM Tool
Test_EU_11.2.7.7.zip
drive.google.com
Extract the Zip and Run "Flasher"
Sconny said:
I created one (11.2.7.7.BA), it should work, but need testers. Ofc, Use it on your own Risk, but we have MSM Tool
Test_EU_11.2.7.7.zip
drive.google.com
Extract the Zip and Run "Flasher"
Click to expand...
Click to collapse
thanks for this bro much appreciated
fastboot -w not correct work
d:\Software_Tools\Multimedia\Handy-Taplet\Handy\Backup\Download\Rom\Payload Dumper 64 bit\payload_output>fastboot -w
Erasing 'userdata' OKAY [ 1.960s]
CreateProcess failed: Das System kann die angegebene Datei nicht finden. (2)
fastboot: error: Cannot generate image for userdata
I owe you a beer Sconny, you brought me back from the brink! I didn't exactly use all of your files, so I'm not sure if I count as a tester, but I was able to use your fastboot commands from Flasher.bat and turn that into a shell script. I ran it not really knowing it was going to work, so I ended up not wiping beforehand but it looks like it turned out fine. Oh and I didn't use your zip, used my own and dumped the payload myself. Thanks again Sconny!
Sconny said:
I created one (11.2.7.7.BA), it should work, but need testers. Ofc, Use it on your own Risk, but we have MSM Tool
Test_EU_11.2.7.7.zip
drive.google.com
Extract the Zip and Run "Flasher"
Click to expand...
Click to collapse
Tested and it worked for me as well other than shows the same userdata wipe error as mentioned. Curious to ask if you could make a flashable zip to include just the latest firmware?
erad1 said:
Tested and it worked for me as well other than shows the same userdata wipe error as mentioned. Curious to ask if you could make a flashable zip to include just the latest firmware?
Click to expand...
Click to collapse
Maybe I should implement another command or manual wiping should work. Isn't that the latest FW?
Sconny said:
Maybe I should implement another command or manual wiping should work. Isn't that the latest FW?
Click to expand...
Click to collapse
yep that is the latest
Sconny said:
Maybe I should implement another command or manual wiping should work. Isn't that the latest FW?
Click to expand...
Click to collapse
Yes but for flashing custom Roms you only need need some of the images flashed to the other slot prior to flashing the custom ROM zip. The system IMG and vendor IMG and some others are not needed. Comes in handy when moving from one custom ROM to another.
https://t.me/havoc_oneplus8/23372
This is an example of it for OnePlus 8...
erad1 said:
Yes but for flashing custom Roms you only need need some of the images flashed to the other slot prior to flashing the custom ROM zip. The system IMG and vendor IMG and some others are not needed. Comes in handy when moving from one custom ROM to another.
Click to expand...
Click to collapse
erad1 said:
https://t.me/havoc_oneplus8/23372
This is an example of it for OnePlus 8...
Click to expand...
Click to collapse
Never mind though as this was inaccurate on my part, vendor img is needed...my bad. This method just lets you flash to latest fw after you're already on a custom rom. So to say if a newer fw came out after you could update to it.
I will take a look on it when I've got more time, sorry guys. I need to test it on myself in order to provide this variant of restoring our devices, but I'm working much as hell atm and family stuff etc. Is more important. But I promise I will try to provide a fully functional package for all versions. System, ODM and Vendor is still buggy, but I have some ideas how to fix it
do u think this could work for AA?
Libra420T said:
do u think this could work for AA?
Click to expand...
Click to collapse
There should be the same bug with wiping. But I have an idea, I gonna download AA and will upload here. 1 hour needed
Uploading right now.
Here is the AA Version. Wipe Manually, i have to figure out why its not working, for me it does (Maybe cable, usb port?)
I am not a Developer, i'm just doing this for fun and testing when i have time. As always, use at your own risk.
I disabled Verity for the 3 Partitions, maybe that will help. If you guys have some Ideas, please let me know.
Once it is working flawlessly, i will create a thread and update the "tool" for BA/AA/DA Devices.
Test2_AA_11.2.7.7.zip
drive.google.com
Gonna update to 11.2.8.8 soon, all versions. Waiting for all zips to download
Sconny said:
Gonna update to 11.2.8.8 soon, all versions. Waiting for all zips to download
Click to expand...
Click to collapse
I'm rooted on T-Mobile stock 11.2.5.5 would I be able to flash 11.2.8.8 via fastboot? Or would I need to convert to EU first?
Pain-N-Panic said:
I'm rooted on T-Mobile stock 11.2.5.5 would I be able to flash 11.2.8.8 via fastboot? Or would I need to convert to EU first?
Click to expand...
Click to collapse
Just follow the tutorial in this forum