I just resurected my xda IIs from the grave and upon start I come to the Align screen stage. I follow the directions as usual but it just keeps asking for the taps over and over and over. It never passes the same five steps. I've tried different ROMs but they all stop there. Could it be caused by the little internal battery being dead? Is my digitizer crap? Is it martians? Are the forces of evil combining against me? Am I doomed?
I'd like to see this old guy work again.
Thanks for any tips in advance.
Raven_coda said:
I just resurected my xda IIs from the grave and upon start I come to the Align screen stage. I follow the directions as usual but it just keeps asking for the taps over and over and over. It never passes the same five steps. I've tried different ROMs but they all stop there. Could it be caused by the little internal battery being dead? Is my digitizer crap? Is it martians? Are the forces of evil combining against me? Am I doomed?
I'd like to see this old guy work again.
Thanks for any tips in advance.
Click to expand...
Click to collapse
hard rest then hold the 2 buttons next to the volume slider only and press the rest button on the bottom using the stylus.this should take you to the 4 color screen with 3 options to be set
1st one leave as NO just press the top button
2nd option as yes by pressing the bottom button then press the top button to goto the 3rd
3rd option change to yes again by pressing the bottom button
then press the message button on the front that looks like an postal letter
this wil reset the options saved kind of like resetting a pc bios to manufacture defaults .
then try again to do the alignment.
I had similar when I flashed pdaviets rom to my blue angel and that resolved it
Thanks for the reply, unfortunately I broke me screen tinkering with it so I'm not able to test your idea.
I started with two LCDs one with a bad digitizer and one with a broken screen. I touch the digitizer off the one a replaced the other so that I had a working screen but then I had the problem listed above. Before I saw your response I thought I might have some dirt or something under the screen causing it to not work so I took it apart but I guess I was just a little too rough this time and cracked the LCD
I'll have to find a new LCD if I plan to resurrect this phone.
Thanks anyways for the help
stuck in 4 color screen
cyberjak said:
hard reset then hold the 2 buttons next to the volume slider only and press the reset button on the bottom using the stylus.this should take you to the 4 color screen with 3 options to be set
1st one leave as NO just press the top button
2nd option as yes by pressing the bottom button then press the top button to goto the 3rd
3rd option change to yes again by pressing the bottom button
Click to expand...
Click to collapse
I´ve tried everything with my XDA III PH20B1 - no camera model -, but I never get the 3 options screen. Just the 4 colors and bottom right the radio version R 1.10.00.
Is there any other way how to make my O2 XDA III boot after the WM6.1 upgrade ( from 2003se) ?
I have the same problem (I have already reply in another thread...), I am still trying to fix it. I suspect from the backup battery, since before I hard reset my SX66 all programs lost their configuration when I turn off and on again my SX66, and when I tried to realign the screen the align cycle repeated forever. Then I tried hard resetting, reflashing to various OS's and I can not pass the initial calibration screen.
Please keep me posted if someone have found the way to solve it.
Thanks !
no need to upgrade or delete anything from bios,this is not a cause of motherboard and software.I removed the motherboard and essembled in a working screen phone.there is no problem all ok,its not a problem with backup battery too.Then i changed working phone motherboard to cant align phone but same as before it dsnt align.Therefore in my investigation its a problem with the touch or screen.
its not a problem with screen cover too.
If any knows the exact solution for align problem screen ,please post it.
eway - press the power/stand by and leave for 15-30secs
then pen reset, press [cam] + [rec] as the 4 colour screen comes on and change 2/3 - as previously stated countless times - press [mail] to reset - this will reboot your new rom.
touch flo user manual is a little allusive
but, soo much too test, soo little time
#===#===#[]#===#===# . . . . . . . . . . . . . _-=d.b=-_
riya2008r2k - can you plz show some pictures of the internals of a BA ?
I for 1 would be very interested, too see. . .
post a link, please!!
How to bypass Align Screen?
If you have flashed a proper rom/ hard reset your device, there could be some dust on display which won't let the align screen pass. This is a real annoying feature on WM platform. But guess there are always ways to bypass software related issues.
The display can be cleaned by patting a small amount of water on it, and then running the water along with a visiting card on the edges of the screen. This will take off all the dust on the sides, and will let you pass the align screen easily. You can simply wipe the display propely with a glass cleaner.
If this doesn't help then :
When your phone says align screen, connect the phone with computer and get it detected in Active Sync. Next, you could be able to access Tree/Files on your phone. If you are able to do so, then go to startup and delete files directing to Align Screen, if I remb it was "welcome" something. Delete the file, and there won't be any align screen.
or
You can always go for an easier method. Download Code Factory's Remore Screen Alignment (http://www.codefactory.es/en/downloads.asp?id=108). And simply enjoy.
In both of the case, active connection with Active Sync is important. If you are unable to connect your phone, then I believe there ain't any way other than changing the display.
Hope it helps.
wbr
Sonny
O2 Flame
Hello everybody,
I've got a serious problem with my 2 years old O2 Flame: sometimes, when I reboot my pda, I can't realign the screen. And when I can do it, after a while, the left of the screen doesn't respond, or, when I click on it, it's another part of the screen that answers! I flashed the bios already: nothing changed.
@Gerd
Did you try Remote Screen Alignment?
Sonny
wow, that tool is awesome. My digitizer is cracked.
Disillusioned said:
@Gerd
Did you try Remote Screen Alignment?
Sonny
Click to expand...
Click to collapse
How do you do that please ?
Zincubus said:
How do you do that please ?
Click to expand...
Click to collapse
Try steps from this post : http://forum.xda-developers.com/showpost.php?p=1769443&postcount=1
This is for HTC Wizard, but it should work.
I m a user of htc touch pro 2.
my phone's screen and touch had been broken and I had my phone repaired , I mean they changed the screen and the touch . ıt worked for a while (2-3days).
but after , power button broke down , in such a way that when I push the power button , screen light turns off , but , if I push the button again in order to get my screen light on , it doesnt work .. screen remains dark
but normally my screen works properly.
can anyone help me to handle the problem ?
thank you
TuHu said:
I m a user of htc touch pro 2.
my phone's screen and touch had been broken and I had my phone repaired , I mean they changed the screen and the touch . ıt worked for a while (2-3days).
but after , power button broke down , in such a way that when I push the power button , screen light turns off , but , if I push the button again in order to get my screen light on , it doesnt work .. screen remains dark
but normally my screen works properly.
can anyone help me to handle the problem ?
thank you
Click to expand...
Click to collapse
That sounds like processor lag to me. I have the same problem on my phone. Can you perhaps tell me what software you have running when that happens
I use Europe_1.86.401.0_Radio_Rhodium_4.49.25.17 rom version . whatever the program is ; I always encounter this problem . when ıt is in sleep mode , I never get the screen light on, back ... ı must restart the phone , then it works..
there is a film under the phone keys connected to the mother board .. do you think the problem raises because of these
Please .. Help me ..
TuHu said:
I use Europe_1.86.401.0_Radio_Rhodium_4.49.25.17 rom version . whatever the program is ; I always encounter this problem . when ıt is in sleep mode , I never get the screen light on, back ... ı must restart the phone , then it works..
there is a film under the phone keys connected to the mother board .. do you think the problem raises because of these
Please .. Help me ..
Click to expand...
Click to collapse
That sounds like the Sleep of Death. That seems to be a common issue of these Rhodium-modeled phones. I'd link you to it, but I'm typing this from my Rhodium and I'm low on memory so I can't search for you
TuHu said:
I use Europe_1.86.401.0_Radio_Rhodium_4.49.25.17 rom version . whatever the program is ; I always encounter this problem . when ıt is in sleep mode , I never get the screen light on, back ... ı must restart the phone , then it works..
there is a film under the phone keys connected to the mother board .. do you think the problem raises because of these
Please .. Help me ..
Click to expand...
Click to collapse
try flashing a custom ROM and see if the problem persists
Hi People.
My HOX was fell from the car while i was driving...so it fall really hard against the concrete floor.... i stop the car to getting my HOX back and assuming its gonna be broken or something ...but instead it was almost intact ...no broken glass or screen... it only was dirty and just a few scratches ( i use a gel silicone case ...really works)... well now i was able to turn it up and see the real damage . after a few tries it didnt do nothing, just vibrates like when you turn it on , but the screen was black...after more tries... the miracle come true the screen turn on and i was very happy...i unlocked the phone and the screen freeze out ... i restart my hox by pressing power button about ten seconds and after that... the screen stays blank ( black , dead) for ever an ever , but all the other things like the three buttons lights works and the red/green led notification works ...but i was devastated.
The other part of the story is that i was trying to restore all he important file... but the usb option was on "only charge" so wasnt able to get into the folder like windows...after that i think in a way to control the phone with sdk adb an other things... and i try two softwares, moborobo and android screencast.. i was surprised when i connect my HOX to my pc ...and open the software (screencast or moborobo) and again i see the light at the end of the tunnel... i saw my lockscreen in this virtual android controller software , then i slide my finger to unlock my phone ...and surprise ...it still work....as i saw it in this virtual controller on my pc the touch screen works great ...the only thing it doesnt work in my HOX is the screen , and its not broken...
ANY IDEA??? SOFTWARE?...HARDWARE?...SCREEN CRACKED? SCREEN DISCONNECTED?
is there an apk who can check hardware or software and tell you whats wrong on your phone...like a scanner??
the technical services here doest exists for this model yet.... cause the HOX is almost new and not too popular ..
thanks...
sorry about my english.
cheers from Chile
Hi, got a new screen, new power and capacitive button flex cables for my friends note 2. Turned on the device and verified new screen is working before taping the screen. Now I turn on the phone, but nothing shows on screen, however its recognizing my touches.. Checked all connections, all good. Any help appreciated. Thanks!
I got a Note 2 SCH-317 with broken LCD. After replaced new LCD everything works fine except phone screen is off right after connected to another phone. Still can talk and hear or communicate with another phone but screen is just off with no image, (all buttons and touch function do not work when screen is off and I have to take the battery out to turn off the phone).
I tried make phone call without the middle frame then it is okay no problem at all but when insert the mid-frame on the problem is again and the screen is only off when making the phone call (exactly right after it connected with another phone) Lately I found out if I press (little hard) on both corners (up right and down left) the screen is on and when it is on touch function and all buttons work fine.
There is anyone tell me how to handle this matter and explain why this happen? Thank you in advance
Also just found another way to keep the screen on during call. After dial the number and phone is in dialing menu, if I press and have the speaker on then the screen is on but screen will turn off again if speaker is off. Weird though !!!!!
Does anyone have an idea???