Hi People.
My HOX was fell from the car while i was driving...so it fall really hard against the concrete floor.... i stop the car to getting my HOX back and assuming its gonna be broken or something ...but instead it was almost intact ...no broken glass or screen... it only was dirty and just a few scratches ( i use a gel silicone case ...really works)... well now i was able to turn it up and see the real damage . after a few tries it didnt do nothing, just vibrates like when you turn it on , but the screen was black...after more tries... the miracle come true the screen turn on and i was very happy...i unlocked the phone and the screen freeze out ... i restart my hox by pressing power button about ten seconds and after that... the screen stays blank ( black , dead) for ever an ever , but all the other things like the three buttons lights works and the red/green led notification works ...but i was devastated.
The other part of the story is that i was trying to restore all he important file... but the usb option was on "only charge" so wasnt able to get into the folder like windows...after that i think in a way to control the phone with sdk adb an other things... and i try two softwares, moborobo and android screencast.. i was surprised when i connect my HOX to my pc ...and open the software (screencast or moborobo) and again i see the light at the end of the tunnel... i saw my lockscreen in this virtual android controller software , then i slide my finger to unlock my phone ...and surprise ...it still work....as i saw it in this virtual controller on my pc the touch screen works great ...the only thing it doesnt work in my HOX is the screen , and its not broken...
ANY IDEA??? SOFTWARE?...HARDWARE?...SCREEN CRACKED? SCREEN DISCONNECTED?
is there an apk who can check hardware or software and tell you whats wrong on your phone...like a scanner??
the technical services here doest exists for this model yet.... cause the HOX is almost new and not too popular ..
thanks...
sorry about my english.
cheers from Chile
Related
here is my problem..
at first.. my touch screen starts to act weird.. the pointer does not go to its proper place. =(... tried calibrating it but it does not work
then... the touch screen does not work.. i have to hold it in a certain way for it to work..
then.. it shows a white screen, and sometimes.. its looks fuzzy but i can hold it weirdly like pressing the side of the screen really hard so that it would come back... and then it works again but when I slide the keyboard... the same problem would occur and would stay that way for 5 minutes..
then.. the touch screen does not work at all
then.. the screen is white and does not come back
NOW!!! HOW CAN I FIX IT.. Is there a way or I can call my BA garbage.. but i really really want it to be fixed
you can download the htc service manual from my signature. it contains all the information necessary for an attempt to fix hardware issues. you should check the flex cable connections, check for dirt and anything that puts pressure on the display or its connections.
thanks.. =D
Hi!
Something is wrong with the touch on my Xperia S. When I plug in the charger or headphones the phone starts to register every tap as a long touch, but only on the lowest centimeter of the screen plus the back, home and meny buttons.
An example is if I tap the Homebutton the list of previous apps opens up, and if I press an icon in the dock it just wants to move it, just like if you long press on it. This makes the phone pretty much useless as I cant use the lower part of the screen.
Like I said this only happens when I have the charger or headphones connected, otherwise it works just fine.
Anyone knows if there is a solution for this, or should I just return the phone?
"EDIT: It seems like the problem goes away after the charger has been connected for a while"
Just clean your screen and if any screen protector exists replace it. If the problem still exists do a software repair
The G3 just dropped down on the floor with the circle case. Then It was working some minutes apparently with no problem, until I myself turn the phone off and restart it. Then the device just didn't turn on. The only thing is that the screen is black and the led notification blinking green and blue
when i connect the charger, the red led blinks once and then disappears, then after 30 seconds the red led appears which apparently shows that the phone is charging the battery. Also When I connect the phone to the PC, a sound of connection is heard from PC but the PC doesn't complete the device recognition process as no new device is found.
I tried to make a hard reset, but nothing happens when I press the power and volume down keys. Tried some other tricks with the battery and the hard keys on the phone but no result at all, as the same story just repeats. Does anybody have a solution for the problem? This devise is the only android device I have
Help
Please Help :crying:
ashkaboos said:
The G3 just dropped down on the floor with the circle case. Then It was working some minutes apparently with no problem, until I myself turn the phone off and restart it. Then the device just didn't turn on. The only thing is that the screen is black and the led notification blinking green and blue
when i connect the charger, the red led blinks once and then disappears, then after 30 seconds the red led appears which apparently shows that the phone is charging the battery. Also When I connect the phone to the PC, a sound of connection is heard from PC but the PC doesn't complete the device recognition process as no new device is found.
I tried to make a hard reset, but nothing happens when I press the power and volume down keys. Tried some other tricks with the battery and the hard keys on the phone but no result at all, as the same story just repeats. Does anybody have a solution for the problem? This devise is the only android device I have
Click to expand...
Click to collapse
Did you do anything else after/during the time that the phone was off? And is there no possibility that you cracked the LCD digitizer? I mean it might sound strange but this is what I had with my old phone. I dropped it, nothing serious but then I put it in my pocket and upon taking it out I noticed the screen not turning on. As stated above, my digitizer was broken and multiple people told me that the digitizer had a small crack which I didn't notice, then when I put it in my pocket I put too much pressure on the digitizer cracking it. The LED-light did work though, and this sounds very similar so my advise going to the store and asking wether they know what the problem might be.
(Hopefully this was helpfull hehe)
ashkaboos said:
Please Help :crying:
Click to expand...
Click to collapse
If you Don't see the LG splash screen when pressing the power button it seems like a screen or digitizer problem for sure.
BUT;
after you try turning it "on" let it sit a few minutes and see if you can call your self or send a text to see if it makes noise vibrates etc. to confirm a screen problem.
OR
Also you can try putting it into download mode.
Battery pull (don't turn on)
plug USB into phone but not computer
Hold volume down AND then plug usb into computer
if this comes up to a pic of something on the phone it will be software related. to get out of this mode you can do a battery pull.
Remember to always read up on topics and things you are doing. There are guides here on XDA to help you out.
Hope you get your phone working
Neorpowa said:
Did you do anything else after/during the time that the phone was off? And is there no possibility that you cracked the LCD digitizer? I mean it might sound strange but this is what I had with my old phone. I dropped it, nothing serious but then I put it in my pocket and upon taking it out I noticed the screen not turning on. As stated above, my digitizer was broken and multiple people told me that the digitizer had a small crack which I didn't notice, then when I put it in my pocket I put too much pressure on the digitizer cracking it. The LED-light did work though, and this sounds very similar so my advise going to the store and asking wether they know what the problem might be.
(Hopefully this was helpfull hehe)
Click to expand...
Click to collapse
I didn't do anything special after/during the time the phone was off. I checked the screen very carefully under a lamp. No particular sign of crack. Thank you very much for sharing ur experience.:good:
Tweakecho said:
If you Don't see the LG splash screen when pressing the power button it seems like a screen or digitizer problem for sure.
BUT;
after you try turning it "on" let it sit a few minutes and see if you can call your self or send a text to see if it makes noise vibrates etc. to confirm a screen problem.
OR
Also you can try putting it into download mode.
Battery pull (don't turn on)
plug USB into phone but not computer
Hold volume down AND then plug usb into computer
if this comes up to a pic of something on the phone it will be software related. to get out of this mode you can do a battery pull.
Remember to always read up on topics and things you are doing. There are guides here on XDA to help you out.
Hope you get your phone working
Click to expand...
Click to collapse
I tried to put it into download mode, but no result at all as no connection could also be made between the phone and PC. Moreover, I tried to make a text/call, but nothing is received by the phone. Thank you very much for ur suggestions.
ashkaboos said:
I tried to put it into download mode, but no result at all as no connection could also be made between the phone and PC. Moreover, I tried to make a text/call, but nothing is received by the phone. Thank you very much for ur suggestions.
Click to expand...
Click to collapse
Seems like the drop damaged the memory and the phone can't reload it, you will have to bring it in
suljo94 said:
Seems like the drop damaged the memory and the phone can't reload it, you will have to bring it in
Click to expand...
Click to collapse
Yeah that's plausible ! I'd bring it in too
Hope you fix your phone fast
Yeah... Probably it's a hardware problem. Someone who checked the phone in order to fix it, said that the problem had been with the device board. Even though I was satisfied with the phone, I have found out that the G3 is a sensitive device, as the height of the table from which it dropped down wasn't too much. So always take care of your G3 phone.
hi, my brother gave me a old z5 premium to troubleshoot. It has no lcd (broken screen) and wants to me add one. When i connect to charge, the phone doesnt vibrate or make any noise. my dumb question is, does this phone need an LCD to turn on? i tried button combination but it does nothing. PC doesnt recognized it. it was working fine right before screen broke. I just dont want to buy a replacement and new battery then turns out its completely dead. even tried the button inside the tray to see if it reboots, but nothing..
I'm not completely sure, but mine was still booting up with a broken display and with no display at all. Are you sure the battery isn't completely dead (over-discharged)? That can even prevent the phone from charging while it's off. See what happens when you check it with a multimeter.
Hello. This is my first thread, I have downloaded maybe hundreds of ROM's from this site, have read thousands of threads and of course bricked a few phones lmao. Now I am here with a REALLY confusing problem. Without further ado, let's dive in. sry for my bad english btw.
I bought a second hand S9 today. The guy whom I bought the device told me, when he turns off the screen of the device by pressing the power button, black and green lines appear when he turns on again, and after a few seconds, when he turns the screen back on by pressing the power button, the problem disappears he told. I think he said there is a problem in the part called screen flex. (I ain't sure what that is, I need info about that too.) Sorry if you're confused this far, cuz more is coming thru
I got a very useful APK file named "OLED/AMOLED Saver" and installed it on my device, it worked really well and the lines were almost invisible anymore. After a few hours of use, what I noticed was even more confusing. I activated the AoD (Always on Display) feature, coincidentally, while testing the screen, when I locked the device by pressing the power button and the clock appeared on the AoD screen, when I turned on the screen in that way, I noticed that the screen did not burn in as if it was brand damn new. But if I don't wait for the AoD screen to show up and immediately press the power button again, the screen turns on completely and something really, really terrible appears, a mixture of black and green. Now let's come to my questions, I've blown your mind a lot I think.
1- Can anyone explain what's going on here?
2- Is the problem in the screen flex or is it purely software? (AoD thing)
3-Is there anyone who has experienced this and was able to completely solve the problem?
Thank you for spending your precious time. Hope I get a solution..
Hello, I have same problem with my old S9, it seems that is fully hardware issue, as a workaround you can set full brightness - it causes this issue to appear less frequently and another option is cooling down the phone - when display is black/green just lock the screen and put your phone to the freezer for a while - it will work properly until it heats again
Its something about an update made by Samsung https://eu.community.samsung.com/t5...t-bars-black-screen-issue/td-p/1745470/page/4