Related
I wanted t oinstall Cm13 so booted into bootloader and unlocked it.
Then I installed TWRP 2.8.7.2 as my recovery. Then booted into recovery and flashed CM13 of 20/12.
It then started bootlooping the bootanimation. I waited for half an hour. The phone became heated and I switched it off.
I then decided to go back to stock 6.0.1 but I could flash using flash-all.sh. I then decided to flash manually each image and was able to flash boot, cache and recovery. But cannot flash system and vendor. Can someone help me i this.
Can anyone provide a twrp backup that I can use. (I didn't do a backup myself).
Please can someone help. Just bought the phone 2 days back. Please help.
eNVy said:
I wanted t oinstall Cm13 so booted into bootloader and unlocked it.
Then I installed TWRP 2.8.7.2 as my recovery. Then booted into recovery and flashed CM13 of 20/12.
It then started bootlooping the bootanimation. I waited for half an hour. The phone became heated and I switched it off.
I then decided to go back to stock 6.0.1 but I could flash using flash-all.sh. I then decided to flash manually each image and was able to flash boot, cache and recovery. But cannot flash system and vendor. Can someone help me i this.
Can anyone provide a twrp backup that I can use. (I didn't do a backup myself).
Please can someone help. Just bought the phone 2 days back. Please help.
Click to expand...
Click to collapse
post a screenshot from cmd here to see the error you get from fastboot...
kopfik said:
post a screenshot from cmd here to see the error you get from fastboot...
Click to expand...
Click to collapse
There is no error. When I manually try to flash system or vendor there is the message sending 'vendor' or sending 'system' and gets stuck with that message. waited for almost half an hour and still no change.
When I booted into twrp, it says cannot mount /vendor and /system.
Edit : I use Linux by the way.
eNVy said:
There is no error. When I manually try to flash system or vendor there is the message sending 'vendor' or sending 'system' and gets stuck with that message. waited for almost half an hour and still no change.
When I booted into twrp, it says cannot mount /vendor and /system.
Edit : I use Linux by the way.
Click to expand...
Click to collapse
well, interesting. i've never experienced problem like you have... have you already tried to do it in windows? or install TWRP v2.8.7.0 and format partitions in that version and then reflash original ROM. but remember, with 2.8.7.0 you wont be able to flash CM13 (at least on my N5X i wasn't....)
kopfik said:
well, interesting. i've never experienced problem like you have... have you already tried to do it in windows? or install TWRP v2.8.7.0 and format partitions in that version and then reflash original ROM. but remember, with 2.8.7.0 you wont be able to flash CM13 (at least on my N5X i wasn't....)
Click to expand...
Click to collapse
Shouldn't you be using the latest twrp 2.8.7.2? Ive had issues flashing roms without using the latest version. You could also have issues with older versions of twrp and encryption. Id suggest wiping data from twrp and then flashing the factory image from bootloader.
Sent from my Nexus 5X using Tapatalk
Im in the exact same situation and my fastboot is broken. My PC isnt recognizing a device is attached anymore. No system or vendor mount in twrp
I think to be able to really do anything you need to get into bootloader and have fastboot recognize the device. Make sure the files from 6.01 are all correct and you're flashing in the right order. Follow the guide item #8 http://forum.xda-developers.com/nexus-5x/general/guides-how-to-guides-beginners-t3206930 If you can get the system.img and vendor.img flashed and then lock the bootloader it will wipe everything to factory, internal storage included. If you do that you must have stock recovery.img flashed as well. If downloading system.img hangs reboot and try it again.
kopfik said:
well, interesting. i've never experienced problem like you have... have you already tried to do it in windows? or install TWRP v2.8.7.0 and format partitions in that version and then reflash original ROM. but remember, with 2.8.7.0 you wont be able to flash CM13 (at least on my N5X i wasn't....)
Click to expand...
Click to collapse
Sorry, I was using v.2.8.7.2.
mnehring said:
Im in the exact same situation and my fastboot is broken. My PC isnt recognizing a device is attached anymore. No system or vendor mount in twrp
Click to expand...
Click to collapse
I got it to work. I just had to change the USB port.
Why don't you try a different USB port or a different cable. Or even try on a different computer.
So as the title says, after flashing cm14. 1 can't go into recovery anymore, it just a black screen. I tried to use flashify but nothing, a couple of apps show that I have twrp 3.0.2.1 but can't get into it... Help?
Cheers
Same situation here. Neither booting the recovery via fastboot without flashing nor flashing the TWRP an then booting into it result in black screen. Flashify gives no results here. Please help.
EDIT; flashing this one via fastboot restores the access to TWRP, confirming it right now. http://forum.xda-developers.com/devdb/project/dl/?id=21065&task=get
JKMB888 said:
Same situation here. Neither booting the recovery via fastboot without flashing nor flashing the TWRP an then booting into it result in black screen. Flashify gives no results here. Please help.
EDIT; flashing this one via fastboot restores the access to TWRP, confirming it right now. http://forum.xda-developers.com/devdb/project/dl/?id=21065&task=get
Click to expand...
Click to collapse
Which thread is this from please?
JKMB888 said:
Same situation here. Neither booting the recovery via fastboot without flashing nor flashing the TWRP an then booting into it result in black screen. Flashify gives no results here. Please help.
EDIT; flashing this one via fastboot restores the access to TWRP, confirming it right now. http://forum.xda-developers.com/devdb/project/dl/?id=21065&task=get
Click to expand...
Click to collapse
Yeah man im in the same boat, if i get time ill try this twrp recovery. Where did that recovery come from?, it seems like the CM recovery for 14.1 nightly high jacks the recovery partition (i call it that,i dont know the term for it)
Sent from my ONEPLUS A3000 using Tapatalk
I believe the official 14.1 nightlies are based on the CB which requires the modified TWRP, which is what @JKMB888 has linked you to.
Hw4ng3r said:
I believe the official 14.1 nightlies are based on the CB which requires the modified TWRP, which is what @JKMB888 has linked you to.
Click to expand...
Click to collapse
I would like to truly confirm that the direct link to recovery, along with the thread in which it can be found, repair the situation. I was able to restore the backup of Freedom OS and the return to CM14.1 backup. We should keep this one somewhere near, jsut in case.
Thanks a lot guys, that did the trick, and done with flashify
JKMB888 said:
I would like to truly confirm that the direct link to recovery, along with the thread in which it can be found, repair the situation. I was able to restore the backup of Freedom OS and the return to CM14.1 backup. We should keep this one somewhere near, jsut in case.
Click to expand...
Click to collapse
@JKMB888 it does work 100% is as simple as flashing the TWRP. Actually, i installed it with CM 14.1 running just fine
Sent from my ONEPLUS A3000 using Tapatalk
Just re flash the TWRP image via Fastboot. Apps like flashify actually use TWRP or whatever recovery installed to flash image file AFAIK. I recommend using modified TWRP,Flashing some roms break the access. But the modified one can withstand almost every new rom installs.
Hope it helps.
Why i have always mount decrypt data when i boot in recovery mode which is TWRP 3.0.2-22 aand ask me to input a password?
Edit: I found the solution, i had a pattern lock screen and i removed it!
HC4Life said:
Why i have always mount decrypt data when i boot in recovery mode which is TWRP 3.0.2-22 aand ask me to input a password?
Click to expand...
Click to collapse
At some point your phone data became encrypted. While booted up if you search for encrypt in settings you'll see your phone is encrypted.
Same thing happened to me yesterday after flashing 3.2.7 and booting up for the first time before going back to TWRP to flash AICP. Only way to decrypt permanently, as far as I know, is to wipe all data including internal and completely start from scratch.
GrandMasterB said:
At some point your phone data became encrypted. While booted up if you search for encrypt in settings you'll see your phone is encrypted.
Same thing happened to me yesterday after flashing 3.2.7 and booting up for the first time before going back to TWRP to flash AICP. Only way to decrypt permanently, as far as I know, is to wipe all data including internal and completely start from scratch.
Click to expand...
Click to collapse
Look at my edited reply...
m4manusraj said:
Just re flash the TWRP image via Fastboot. Apps like flashify actually use TWRP or whatever recovery installed to flash image file AFAIK. I recommend using modified TWRP,Flashing some roms break the access. But the modified one can withstand almost every new rom installs.
Hope it helps.
Click to expand...
Click to collapse
actually flashify did the trick for me as I had no access to a pc for the time
http://forum.xda-developers.com/one...nity-build-t3461648/post68691560#post68691560
Flash this recovery. Fixed the problem for me
JKMB888 said:
I would like to truly confirm that the direct link to recovery, along with the thread in which it can be found, repair the situation. I was able to restore the backup of Freedom OS and the return to CM14.1 backup. We should keep this one somewhere near, jsut in case.
Click to expand...
Click to collapse
i am facing just the same situation with cm14.1 nightly and can't boot into recovery
i tried flashing the recovery image provided by you i.e. twrp-3.0.2-22-oneplus3.img but i face the same problem again
when i go into the recovery all i see is a black screen with a white notification light on and it remains there untill i switch off my phone manually using the power button
i tried facing the problem when i installed the cm14.1 nightly
i was unable to login snapchat as i device was rooted as said by the message on snapchat
so i decided to unroot my device via supersu FULL UNROOT option
after a reboot i successfully logged into snapchat
then i tried to root it again
i went into recovery to flash the supersu zip
and since then i have been unable to see the twrp recovey
please help me
This thread is a life save. Tried everything and it drove me nuts not getting into recovery.
THANK YOU!
gangangan2 said:
http://forum.xda-developers.com/one...nity-build-t3461648/post68691560#post68691560
Flash this recovery. Fixed the problem for me
Click to expand...
Click to collapse
Thank you so much it's work for me now..
After I got the recovery back, I flashed CM13 again and ARM64 6.0 Nano Gapps for my Oneplus 3, but I'm getting an error after the "preparing apps' screen is loaded saying that - unfortunately the process android.process.media has stopped one plus 3 boot and then the phone switches off.
Any solution to this? I've already tried flashing different versions of CM13.
Thank you!! I was looking for hours.
This link fixed the problem!
JKMB888 said:
Same situation here. Neither booting the recovery via fastboot without flashing nor flashing the TWRP an then booting into it result in black screen. Flashify gives no results here. Please help.
EDIT; flashing this one via fastboot restores the access to TWRP, confirming it right now. http://forum.xda-developers.com/devdb/project/dl/?id=21065&task=get
Click to expand...
Click to collapse
Hey, guys. I'm pretty sure I bricked my phone and there's no way to get out.
So I was on CM13 official builds on my OP3. Then, on the OTA update system they have, I got moved onto the CM14.1. I downloaded from here and went into my twrp recovery to flash. I made a clean flash and then proceeded to go back to system. I thought everything was ok until I realised I hadn't flashed a gapps package which I pretty much need to survive as all my contacts backups etc. are on there. I powered off my phone and went to go back into the recovery after downloading gapps 7.1 micro. It went past the *You're device can not be trusted'* and then went to the oneplus screen. After that, it stayed like that for about 30 secs and powered off. At first, I thought I messed something up and tried again. I repeated that for about 3 times and it didn't work. I tried going into the normal system and coming back to recovery and it didn't work still. In fact, now I can't even get into system. Now, i can only boot up to fastboot, where my computer still doesn't realise my phone is plugged in.
Anyone got any ideas on how to fix this? I wouldn't say I'm a noob at this because I have flashed many times before but I'm relatively new to the scene. I didn't see this thread before i ripped my hair out and i think wrecked my phone @JKMB888
EDIT: I sorted it out with help from Naman Bhalla's unbrick thread and this. A certain combo works and now I'm on CM14.1 enjoying life
Hi
Can anyone help with this ?
I am stuck on a Linux logo on my screen
I am unable to go into recovery or Bootloader mode
However if I Fastboot, it recognize the device
I tried flashing the recovery image and It Flashed successfully; Yet I cannot boot into Recovery
I tried Flashing the the Bootloader and the same
Funny thing is all Fastboot commands seem to work, like rebooting the Bootloader, but it goes straight to the Linux logo
see picture attached
Thank you.
Voyebanm said:
Hi
Can anyone help with this ?
I am stuck on a Linux logo on my screen
I am unable to go into recovery or Bootloader mode
However if I Fastboot, it recognize the device
I tried flashing the recovery image and It Flashed successfully; Yet I cannot boot into Recovery
I tried Flashing the the Bootloader and the same
Funny thing is all Fastboot commands seem to work, like rebooting the Bootloader, but it goes straight to the Linux logo
see picture attached
Thank you.
Click to expand...
Click to collapse
Did you erase the system? If not try to flash for fastboot just boot.img, maybe help you, if don't reboot flash the entire rom image
I was testing volte.zip. I already tried flashing the boot file, still nothing. I tried flashing miui global fastboot with miflash still no luck. It sees the device but flashed for 5s and then said successful.
did u check "clean all" and try edl mode (just a reminder,it happened to me many times,i was impatient/panicked forgot to check "clean all")
Voyebanm said:
I was testing volte.zip. I already tried flashing the boot file, still nothing. I tried flashing miui global fastboot with miflash still no luck. It sees the device but flashed for 5s and then said successful.
Click to expand...
Click to collapse
I have never seen this linux logo before on Mi Max and I can assure you I am on top of everything happening around it...
I think you did something hmmm... excuse me but stupid... That volte.zip is for kenzo and it flashes all partitions that you are not supposed to flash with anything but hydrogen specific images... Your only option is EDL mode flashing and I am not even sure if it is going to work.
Good luck...
nijel8 said:
I have never seen this linux logo before on Mi Max and I can assure you I am on top of everything happening around it...
I think you did something hmmm... excuse me but stupid... That volte.zip is for kenzo and it flashes all partitions that you are not supposed to flash with anything but hydrogen specific images... Your only option is EDL mode flashing and I am not even sure if it is going to work.
Good luck...
Click to expand...
Click to collapse
No Luck so far.
Voyebanm said:
No Luck so far.
Click to expand...
Click to collapse
That seem be a similar case at inverse (Hydrogen on Helium) but maybe help you: http://forum.xda-developers.com/showpost.php?p=68205960&postcount=24
SubwayChamp said:
That seem be a similar case at inverse (Hydrogen on Helium) but maybe help you: http://forum.xda-developers.com/showpost.php?p=68205960&postcount=24
Click to expand...
Click to collapse
I will give that a try. Thanks
http://en.miui.com/a-234.html
Install MiFlash from Xiaomi, download fastboot image and unpack it.
http://xiaomitips.com/guide/how-to-put-mi-max-into-edl-mode/
Boot to EDL mode with hard keys method, screen stays black, but Qualcomm QH USB device shows up in Device Manager/Ports. MiFlash fastboot image.
If you have 8 or newer Windows, you have to boot it driver signature verification disabled before MiFlash install:
http://www.howtogeek.com/167723/how...8.1-so-that-you-can-install-unsigned-drivers/
SubwayChamp said:
That seem be a similar case at inverse (Hydrogen on Helium) but maybe help you: http://forum.xda-developers.com/showpost.php?p=68205960&postcount=24
Click to expand...
Click to collapse
Thank you all for the suggestions, but this helped me to fix the problem and it was easy to perform
PS: I spoke too fast now my SIM card is not detected, in both slots
Voyebanm said:
Thank you all for the suggestions, but this helped me to fix the problem and it was easy to perform
PS: I spoke too fast now my SIM card is not detected, in both slots
Click to expand...
Click to collapse
What did you do to understand, maybe wrong firmware, maybe just a problem of modem partition, if you are using DualBootPatcher try with a CM based rom like primary, other possibility is to flash just NON-HLOS.bin of corrrect rom in fastboot mode, maybe wrong file in Update Firmware folder (in zip rom), go with a file explorer to /data/nvram if it`s generated for the new rom, take a backup first and delete after, reboot device (if this is the case) and check again your sim.
SubwayChamp said:
What did you do to understand, maybe wrong firmware, maybe just a problem of modem partition, if you are using DualBootPatcher try with a CM based rom like primary, other possibility is to flash just NON-HLOS.bin of corrrect rom in fastboot mode, maybe wrong file in Update Firmware folder (in zip rom), go with a file explorer to /data/nvram if it`s generated for the new rom, take a backup first and delete after, reboot device (if this is the case) and check again your sim.
Click to expand...
Click to collapse
Thank you though, I was able to resolved it by flashing the EFS backup that I had.
Problem SOLVED !!!
Thanks again for your Help.
I got a bricking when I tried flashing MIUI EU ROM over CM on a locked bootloader. Is there a way to flash the latest firmware files without also flashing a new boot image which could brick the phone? I had to do an EDL flash using MiFlash last time, I don't want to go through the hassle again.
so i permanetly installed twrp and was trying to put on a custom rom. I wiped everything and now twrp wont boot at all from the boot loader. i tried the temporary boot in fast boot and it still wont boot and i have no recovery os. PLEASE help to get andoid ten back on or anything i cant afford to loose this phone !
anntaoo95 said:
so i permanetly installed twrp and was trying to put on a custom rom. I wiped everything and now twrp wont boot at all from the boot loader. i tried the temporary boot in fast boot and it still wont boot and i have no recovery os. PLEASE help to get andoid ten back on or anything i cant afford to loose this phone !
Click to expand...
Click to collapse
TWRP is not compatible with Android 10. I hope someone can help you out.
i have twrp on my phone but cant install any apps the boot loader never shows up i keep getting error 7s when trying to install a rom. i just want to get the factory os back on. THere has to be a way
anntaoo95 said:
i have twrp on my phone but cant install any apps the boot loader never shows up i keep getting error 7s when trying to install a rom. i just want to get the factory os back on. THere has to be a way
Click to expand...
Click to collapse
Can you just flash back to a factory image??
Grab factory image from https://developers.google.com/android/images
And you'll be all set. Yes, you'll lose root and any data, but you'll be back on stock.
Thanks so much.so i tried flashing the os before and it failed. this time i went back and copied and pasted the fastboot files into the os folder with the script. It worked perdectly. I really want to put roms on my phone. I think i may have messed something up when installing twerp and formating and wiping the data
Afaik, twrp is not (yet) installable, so you'd have to
Code:
fastboot boot twrp.img
every time to access twrp. Android 10 is still very young, so have a little patience, and in couple of months you'll have plenty of fun with ROMs
And congrats for success, even if it is returning to stock.
calinorg said:
Android 10 is still very young, so have a little patience.
Click to expand...
Click to collapse
To be honest, I doubt TWRP will ever fully work on Q for the newer pixel devices. We have a logical partitioning system so it's impossible to mount /system /vendor and /product to be writable.
From what I've been hearing, custom rom developers have just been flashing their ROMs while in stock recovery. I'm going to assume that'll be the norm when Q ROMs are released for us.
Sent from my Google Pixel 3a XL using XDA Labs
I do believe someone will come up with a solution. If John wu managed to get magisk working (and rooting is ever so harder with new Android partitioning system), I don't see why couldn't we have twrp. Maybe it won't be installable, but it could work...
Hey
couldn't find anything related to my situation so I decided to ask. Here it goes:
After having to wait an entire week to unlock the bootloader (really??) its finally unlocked and I decided to install LineageOS.
Got a Mi10T Lite, gauguin, M2007J17G. It managed to snuck in an update to something like August 2020 security level at some point but after unlocking it got reset, so I suppose it had Android 10 and MIUI 12(?).
Simple enough, have done that countless times before.
- Flashed recovery, format data/factory reset as explained in wiki
- adb sideloaded ROM (nightly builds 20220822 and 20220815) - both succeeded
After rebooting the devices enters the bootloader again.
The wiki never mentions behaviour like this and I couldn't find anything online.
Do I need to flash latest MIUI ROM again?
Any ideas what went wrong and how to solve this issue?
I unzipped the ROM and fastboot boot boot.img which just resulted in a reboot to fastboot again.
Any idea or, preferrably, a solution would be most welcome
Thanks in advance.
woelkchen said:
Hey
couldn't find anything related to my situation so I decided to ask. Here it goes:
After having to wait an entire week to unlock the bootloader (really??) its finally unlocked and I decided to install LineageOS.
Got a Mi10T Lite, gauguin, M2007J17G. It managed to snuck in an update to something like August 2020 security level at some point but after unlocking it got reset, so I suppose it had Android 10 and MIUI 12(?).
Simple enough, have done that countless times before.
- Flashed recovery, format data/factory reset as explained in wiki
- adb sideloaded ROM (nightly builds 20220822 and 20220815) - both succeeded
After rebooting the devices enters the bootloader again.
The wiki never mentions behaviour like this and I couldn't find anything online.
Do I need to flash latest MIUI ROM again?
Any ideas what went wrong and how to solve this issue?
I unzipped the ROM and fastboot boot boot.img which just resulted in a reboot to fastboot again.
Any idea or, preferrably, a solution would be most welcome
Thanks in advance.
Click to expand...
Click to collapse
Try to flash the last firmware or rom
V13.0.4.0.SJSMIXM
https://xiaomifirmwareupdater.com/firmware/gauguin/
https://xiaomirom.com/en/rom/mi-10t-lite-gauguin-global-fastboot-recovery-rom/
TWRP
https://androidfilehost.com/?w=files&flid=318225
Thx. Went ahead and did that which ofc solved the issue. Thx a lot
Hi, I have same issue. I installed lineage 19.1 2022-09-26 on Mi 10T lite, actually last nightly, and after succesfull installation, after reboot lineage doesnt start and i have just fastboot mode. I have lineage recovery installed, and if i try to install recovery-rom, i dont feel comfortable on installing fastboot-rom, i get error, just after 47% i get unknown signature and it ask if i want continue, if i choose yes continue, on device it says it cant downgrade so its stopped. I also deleted cache but it didnt help, im not very happy to format system partition, im worried to brick it. Should i format system partition? And how deal with missing signature when i try to push stock rom? should i allow it?
BolognaTown said:
Hi, I have same issue. I installed lineage 19.1 2022-09-26 on Mi 10T lite, actually last nightly, and after succesfull installation, after reboot lineage doesnt start and i have just fastboot mode. I have lineage recovery installed, and if i try to install recovery-rom, i dont feel comfortable on installing fastboot-rom, i get error, just after 47% i get unknown signature and it ask if i want continue, if i choose yes continue, on device it says it cant downgrade so its stopped. I also deleted cache but it didnt help, im not very happy to format system partition, im worried to brick it. Should i format system partition? And how deal with missing signature when i try to push stock rom? should i allow it?
Click to expand...
Click to collapse
Cant use LOS recovery for stock rom.
go back to Miui
https://forum.xda-developers.com/t/flash-tool-guide-use-xiaomi-flash-tool.4262425/
NOSS8 said:
Cant use LOS recovery for stock rom.
go back to Miui
https://forum.xda-developers.com/t/flash-tool-guide-use-xiaomi-flash-tool.4262425/
Click to expand...
Click to collapse
i didnt understand completely, should i find stock recovery and 'fastboot flash recovery stock-recovery.img'
or just using miflashtool without adding any stock recovery?
BolognaTown said:
i didnt understand completely, should i find stock recovery and 'fastboot flash recovery stock-recovery.img'
or just using miflashtool without adding any stock recovery?
Click to expand...
Click to collapse
Use Miflash and read the tutorial carefully.
Miflash=Fastboot rom
Thank you, i unbricked it, and i installed lineage. Great Job