Develop Bugs

[Q] huawei ascend p6 multiloader

I think i have bricked my p6 after flashing boot(b125).img from fastboot and its stuck and restarting at bootscreen. Pls someone help with heawei multiloader as am told it can fix bricked phone from usb. File now no more assessible from huawei website. pls help.

Hey do you have twrp recovery installed? Have you already tried to get into your stock recovery ?( Holding volume up/down button simultanesly during boot)

nourudeen said:
I think i have bricked my p6 after flashing boot(b125).img from fastboot and its stuck and restarting at bootscreen. Pls someone help with heawei multiloader as am told it can fix bricked phone from usb. File now no more assessible from huawei website. pls help.
Click to expand...
Click to collapse
WisdomSeeker said:
Hey do you have twrp recovery installed? Have you already tried to get into your stock recovery ?( Holding volume up/down button simultanesly during boot)
Click to expand...
Click to collapse
my phone never came with any stock recovery. had 'factory mode' not recovery when holding those bottons. In factory mode, no option for flashing anything. Now phone only restarts on bootscreen and then on-off. initially tried flashing TWRP just befor bricking phone but adb gave error like this 'partition not support flash and i had already flash a boot.img for b125

b608 version of my phone was a brick was b118 installed, there is a solution?
sorry my poor english, I'm from Turkey, please help, please..

Both of you should try to flash the stock recovery! You can download it here www).androidfilehost.(com)/?fid=23252070760973625 (just remove the brackets) .
Then follow these steps:
1. Put your device in fastboot mode ( > adb reboot bootloader )
2. Flash recovery via fastboot ( fastboot flash recovery recovery.img )
3. Reboot via fastboot ( fastboot reboot )
Afterwards try to reboot to your stock recovery . Then you can simply install over the update.app a fresh Huawei Firmware
Greetings Wisdomseeker

WisdomSeeker said:
Both of you should try to flash the stock recovery! You can download it here www).androidfilehost.(com)/?fid=23252070760973625 (just remove the brackets) .
Then follow these steps:
1. Put your device in fastboot mode ( > adb reboot bootloader )
2. Flash recovery via fastboot ( fastboot flash recovery recovery.img )
3. Reboot via fastboot ( fastboot reboot )
Afterwards try to reboot to your stock recovery . Then you can simply install over the update.app a fresh Huawei Firmware
Greetings Wisdomseeker
Click to expand...
Click to collapse
well wisdom, like i said, its restarting at boot screen so i cant get to fastboot. i sometimes able to enter an android (3e) recovery and try installing what u said but each time, installation is stopped. Got a certain miui rom and halfway it says NOT VALID OTA PACKAGE. SCATTER FILE MISSING. All other package rom or other recovery refuse to install and say ERROR. i have tried this your files but not possible.

nourudeen said:
well wisdom, like i said, its restarting at boot screen so i cant get to fastboot. i sometimes able to enter an android (3e) recovery and try installing what u said but each time, installation is stopped. Got a certain miui rom and halfway it says NOT VALID OTA PACKAGE. SCATTER FILE MISSING. All other package rom or other recovery refuse to install and say ERROR. i have tried this your files but not possible.
Click to expand...
Click to collapse
Maybe you should try To use another SD card Or mabye Format the current one and then add the update.APP To it
PHP:

WisdomSeeker said:
Maybe you should try To use another SD card Or mabye Format the current one and then add the update.APP To it
PHP:
Click to expand...
Click to collapse
No luck! I think the huawei multiloader will do the work. Any Idea where i can download?

nourudeen said:
No luck! I think the huawei multiloader will do the work. Any Idea where i can download?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2618253

I dont understand... When i start multiloader.exe it seems to go.. But i can only download update.app file with che left One button.the center button let me either download the ROM and the right button keep the tool off. What i have to do for use this magic program?

When I reboot into recovery TWRP gets stuck in a splash screen loop.

Hello, ever since I flashed the 14.1 nightly CM ROM, TWRP has no longer worked. I have tried reflashing the compatible MM BL and also tried a normal TWRP using fastboot, and nothing seems to fix it. Whenever I reboot into recovery mode, it just flashes a gray screen and never gets out of the loop. My phone can start up into normal mode fine, its just recovery that does not work.

https://drive.google.com/open?id=0B72QQTXqZSRweG5sYW0taFoycFE
download above files and extract files. go to MM bootloader folder. now reboot your phone into fastboot mode and connect to PC. now run upgrade.bat... once it finishes transfer file. and phone reboots the bootloader. now run twrp.bat. now as transfer finishes. now very important do not boot your phone to normal os.. find option for recovery mode and reboot into recovery. you will get into recovery..

sukhwant717 said:
https://drive.google.com/open?id=0B72QQTXqZSRweG5sYW0taFoycFE
download above files and extract files. go to MM bootloader folder. now reboot your phone into fastboot mode and connect to PC. now run upgrade.bat... once it finishes transfer file. and phone reboots the bootloader. now run twrp.bat. now as transfer finishes. now very important do not boot your phone to normal os.. find option for recovery mode and reboot into recovery. you will get into recovery..
Click to expand...
Click to collapse
are you have bootloader for z008 sir ? thanks

sandycogan said:
are you have bootloader for z008 sir ? thanks
Click to expand...
Click to collapse
i will try to post soon

help:Asus bootloop

I was on cm-13.0-20161205-NIGHTLY-Z00A
and I have upgrade bootloader before flash cm13
Now ,
I was trying to flash CleanSTOCK-MM-v3.4+ZenKernel-Z00A
wiping everyting (system-data-internal stograge..)
and flashing from SD card
after falshing phone going to have loop of restart on asus screen
and sometime it automaticlly going to twpr
if i reflash cm-13.0-20161205-NIGHTLY-Z00A it works!!!
i can go to twpr and bootloader
What should I do to flash cleanstock??

download the file from the link below. extract it and run "Run_Tool.bat" . put phone in fastboot mode. now select option to flash mm boot loader. after finish the process. boot into recovery mode and sideload latest MM from asus website.
https://drive.google.com/open?id=0B72QQTXqZSRwN3lOTzFmRVJPbjA
Note you may see an error while entering recovery mode 'android logo with error sign'. if you see that press and hold power button immediately click volume plus button then release power button you will enter recovery

No OS is installed. Moreover recovery cannot be accessed. Nor can flash it via adb.

Previously I was using Ressurection Remix treble rom which is based on android 9 pie. I went to TWRP and wiped the OS. Then I tried to install a new rom called Dot OS. But it showed error 7. So I flashed Vendortofactory zip within twrp and without rebooting again into TWRP I flashed a new TWRP image within TWRP by selecting Recovery mode. After that I cant boot into TWRP and as already my OS is gone I also cannot boot into any system. Moreover my device is not getting detected in my PC. I cannot install TWRP by writing commands in cmd, while the phone is in fastboot mode as the device is not getting detected in my pc. Really it is urgent. I will be glad if someone helps me. Thanks in advance.

What is the present booted state of your device? Are you in twrp, or bootloader. Most of the time you can keep on pressing the power button. When it boots into a message about unlocked bootloader, press volume button to select recovery and it will boot into twrp

You should be able to boot in fastboot mode without recovery nor os, maybe your drivers are not working on windows? Try different usb ports, check if the display says "bootloader" or something. If nothing works try the usb shunt, this device is literally 'unbrickable' if it's working properly.

Watch this video(https://www.youtube.com/watch?v=DexLELi04XY) and then you will be able to detect your phone in your pc in qcom 9008 mode , then use qfil to flash ZUI firmware ,there are plenty of tutorials on the internet for that ,then follow the proper procedure mentioned in DotOs thread for flashing the new rom .
Hope it helped .

If you don't want to flash the firmware and all long process just follow the following steps
Enter in to the boot loader make sure you installed all the drivers in to pc then open cmd windows in adb fastboot folder and enters the following cmd into the cmd
Fastboot -i 0x2b4c devices this will detect your device
After that enter
Fastboot -i0x2b4c flash recovery recovery name.img
And boom you are good to go flash the rom of your choice and enjoy
For this process you need following files
Adb and fastboot devices
Drivers of zuk z2
Latest recovery and place revovery image file into the adb and fastboot folder if you are confused about anything pm me i am not the expert but i faced simillar problem and solved by this method

yashpatel1221 said:
If you don't want to flash the firmware and all long process just follow the following steps
Enter in to the boot loader make sure you installed all the drivers in to pc then open cmd windows in adb fastboot folder and enters the following cmd into the cmd
Fastboot -i 0x2b4c devices this will detect your device
After that enter
Fastboot -i0x2b4c flash recovery recovery name.img
And boom you are good to go flash the rom of your choice and enjoy
For this process you need following files
Adb and fastboot devices
Drivers of zuk z2
Latest recovery and place revovery image file into the adb and fastboot folder if you are confused about anything pm me i am not the expert but i faced simillar problem and solved by this method
Click to expand...
Click to collapse
This assumes u have upgraded bootloader to 4.4 kernal.
U can still boot into twrp.. When the phone is booting up press vol up key and select recovery.. From there boot into twrp. There select f2v or v2f .. Then flash twrp which u want to flash.. Reboot to recovery.. U will get promp no os installed.. Ignore and reboot to recovery . Then again d9 f2v or v2f depending on what rom to install.. Again reboot to recovery... Then flash rom of ur choice.
This procedure is needed when changing from vendor to factory and vice versa.

sanjay.2704 said:
This assumes u have upgraded bootloader to 4.4 kernal.
U can still boot into twrp.. When the phone is booting up press vol up key and select recovery.. From there boot into twrp. There select f2v or v2f .. Then flash twrp which u want to flash.. Reboot to recovery.. U will get promp no os installed.. Ignore and reboot to recovery . Then again d9 f2v or v2f depending on what rom to install.. Again reboot to recovery... Then flash rom of ur choice.
This procedure is needed when changing from vendor to factory and vice versa.
Click to expand...
Click to collapse
I don't understand what you are talking about as i say i am not some kind of technical expert i am here help regarding this i faced similar situation where i am not able to enter into recovery and also not able to enter into the os and when i restart the phone it automatically boot into fast boot mode what ever option i select and i solved my problem by this method

"the current image(boot/recovery) have been destroyed and cannot boot"

I unlocked bootloader of my phone, flashed TWRP then installed new ROM and then tried to boot bt the only thing I get on my screen is "the current image(boot/recovery) have been destroyed and cannot boot"
This screen repeats and I cn't do anything, not able to find any good tool or something to flash stock rom again...Please help am alrady dead

Dude, you just should flashing original/stock boot.img and recovery.img. And your phone already fixed.

Jus flash vbmeta and than flash twrp again . It will work fine and you won't get erro

Flash vbmeta

where did you got the file?

I have the same problem. Also cant flash vbmeta because the phone cant go into fastboot/recovery mode. It seems the only option is to flash it in edl mode and haven't found a tool that can do that

orl4nd said:
where did you got the file?
Click to expand...
Click to collapse
I found one in the pixel rom thread, it worked fine for me when i had this issue flashing candy rom

Ragzone said:
I have the same problem. Also cant flash vbmeta because the phone cant go into fastboot/recovery mode. It seems the only option is to flash it in edl mode and haven't found a tool that can do that
Click to expand...
Click to collapse
You have to flash the boot.img via adb to boot into Fastboot or Recovery.

Stuck at same problem.
I am also facing same problem. I can't open fastboot and the phone reboots to stock recovery after some time. Please help.

same problem for me
Ragzone said:
I have the same problem. Also cant flash vbmeta because the phone cant go into fastboot/recovery mode. It seems the only option is to flash it in edl mode and haven't found a tool that can do that
Click to expand...
Click to collapse
i have the same problem exactly. no access to adb commands nor recovery. please let me know if you could find a solution.

reza14 said:
i have the same problem exactly. no access to adb commands nor recovery. please let me know if you could find a solution.
Click to expand...
Click to collapse
I will keep trying the different flashing tools. Also let me know if you are succesful.

RMX1901CH　unbirick
RMX1901CH
I was in the same state but unbirick.
When the power is off Press the volume minus and the power simultaneously.
If you are in fastboot mode
1.adb flashing command // fastboot flash recovery twrp-3.3.1-24- RMX1901-mauronofrio.img
2. after starting TWRP - connected with otg usb memory (StockROM.ozip)
3. USBOTG to mount
4.wipe dalvik / ARTCache & cache & system & data
* 5. INSTALL StockROM
* RMX1901_11_OTA_0190_all_fSt4F56aQlqf.ozip (China) A19
I haven't tried with older versions
The international version will show an inappropriate error, and it may be possible with the same language model
* 6. reboot
Japanese who cannot speak English
I did this way

Is this problem Solve? i face the same problem. what can i do?
Hatzey said:
I unlocked bootloader of my phone, flashed TWRP then installed new ROM and then tried to boot bt the only thing I get on my screen is "the current image(boot/recovery) have been destroyed and cannot boot"
This screen repeats and I cn't do anything, not able to find any good tool or something to flash stock rom again...Please help am alrady dead
Click to expand...
Click to collapse
Please help me.

same issue , can't do anything

the only way I found is , to know this user and pass in this tool so that I could test the firmware and post this here

Такая же проблема, помогите!!!

Long press volume down and power button , the phone will boot into fastboot mode. Flash vbmeta with disable verity command . It worked for me. No need do anything else.

volume down and power button for 10 sec
then flash stock recovery
then wipe data from stock rocovery
then back to bootloader and flash twrp recovery
then transfer stock rom zip on device
install it
done

Man i have the same problem, did you find any solution?
I already downloaded the qualcomm flash image loader, the pc detects the phone only when i press volume + and volume - and connect it, so i know i can do something, im gonna try with the EDL mode, any advance i'll let you know

how to do Flash vbmeta with disable verity command ???