Hi guys,
I request your urgent help. Yesterday I tried to install a Marshmallow custom ROM (pac_A6020_MM.Alpha.1.Official_20160704-204606) in my Lenovo VIBE K5 Plus A6020a46. Now it seems bricked. I can boot into fastboot mode but not into the recovery mode. When I turn on, it it is just stuck on Lenovo Logo screen. I cannot flash with QFIL as the port is not detected on my Windows 10 Laptop. What should I do? Please help.
Download stock ROM and twrp recovery and flash twrp recovery in fastboot mode. Then flash stock ROM using twrp recovery. That's it.
cityengineers said:
Download stock ROM and twrp recovery and flash twrp recovery in fastboot mode. Then flash stock ROM using twrp recovery. That's it.
Click to expand...
Click to collapse
Thank you for your reply. But now device is not shown in adb command line "adb device". So I cant continue. Neither QFIL recognize the device port.
Please check the screenshot : http_//imgur_com/nMu7sfe
I've faced the same problem that you have said mobile didn't detect by the PC, that's USB driver problem, make sure you installed USB drivers for your device, if not then install USB drivers for your device, then only PC can detect your device. Then flash the twrp and flash the stock ROM via twrp.
try using QLIP and press the volume + button
http://www.mediafire.com/download/1...1.2_BMAIN_16G_ROW_otafull+By+GSMDevelopers.7z
http://www.mediafire.com/download/u4b8uzz4dy454a2/A6020a46+SDcard+upgrade+SOP.doc
here is a link for firmware and instructions
Password - gsmdevelopers.com
Thank you all dear friends for your timely help. But in my case none of the methods above worked completely. I couldn't flash my Vibe K5 Plus with QFIL because it never detected the port. When I tried restarting the phone holding Volume + key, port just showed up and when I clicked on download button in QFIL, the phone restarted, the port disappeared and nothing happened. So, that method also failed.
Now I just showed the problem at Lenovo Service center. They made it, but installed a very old version (A6020a46_S024) of OS from which I could not update to the latest one (A6020a46_S048_160701_ROW). It showed some ota error after downloading almost 156MB. Luckily I could find the latest ROM (A6020a46_S048_160701_ROW) from the Russian Lenovo Forum. It helped me to update my Lenovo Vibebe K5 Plus_A6020a46 to the latest version. Once again thank you all. :good:
Jintu Jose said:
Thank you all dear friends for your timely help. But in my case none of the methods above worked completely. I couldn't flash my Vibe K5 Plus with QFIL because it never detected the port. When I tried restarting the phone holding Volume + key, port just showed up and when I clicked on download button in QFIL, the phone restarted, the port disappeared and nothing happened. So, that method also failed.
Now I just showed the problem at Lenovo Service center. They made it, but installed a very old version (A6020a46_S024) of OS from which I could not update to the latest one (A6020a46_S048_160701_ROW). It showed some ota error after downloading almost 156MB. Luckily I could find the latest ROM (A6020a46_S048_160701_ROW) from the Russian Lenovo Forum. It helped me to update my Lenovo Vibebe K5 Plus_A6020a46 to the latest version. Once again thank you all. :good:
Click to expand...
Click to collapse
Please write the method how to updated it if you used QFIL. I think a lot of users can get help from your experience!
For drivers, install QDLoader HS-USB Driver drivers (google them)
and if you still can not detect any HS USB port in device manager but see an ADB Interface port. upgrade drivers of ADB port with QDLoader HS-USB Driver you downloaded earlier
This will detect your phone,
Good Luck!
QFIL was not useful for me. When I started the phone holding Volume+ button it detected the port and when clicked on the download button in QFIL the phone restarted after 3-5 seconds with blank screen, after a few seconds showed an error message "Download Fail, Port not Available". Then I had remove the battery to start my phone in the mormal mode. As I have said above, I had to approach Lenovo Service center to recover my Lenovo VIBE K5 Plus_A6020a46. They recovered it and installed the oldest OS version for it. It had many problems with that version, such as draining battery very soon and heating issues etc. I could not update it with Lenovo companion app. It downloaded the 156MB update, but during installation it showed a weird OTA error. I tried it for 5 times, but the result was always the same.
So I searched for the latest update ROM in the internet (A6020a46_S048_16070 1_ROW) I got it from an Russian Lenovo Community website. I extrated the zip file (A6020a46_S048_16070 1_ROW_QPST.zip). There were many ota update files and a "system" update file. I copied that "system.zip" file to the phones SD card and updated from there using recovery mode. It was successful.
If someone is in need of the Latest ROM (1.34 GB) for the Lenovo VIBE K5 Plus_A6020A46 go to:- http_//phonedl.ota.lenovomm.com/dls/v6/A6020a46_S048_160701_ROW_WC39DE8CCE.zip
add " : " instead of underscore " _ " after http in the link
or just copy and paste in the URL bar :- phonedl.ota.lenovomm.com/dls/v6/A6020a46_S048_160701_ROW_WC39DE8CCE.zip
Use the ota update referring to your country .
Lenovo K5 Plus Firmware (Latest)
Here is the latest stock ROM for Lenovo Vibe K5 Plus A6020a46
Release Date : 17/08/2016
Lenovo K5 Plus - Firmware A6020a46_S054_160817_16G_ROW_QPST
Download (1.17 GB)
:good:
Jintu Jose said:
QFIL was not useful for me. When I started the phone holding Volume+ button it detected the port and when clicked on the download button in QFIL the phone restarted after 3-5 seconds with blank screen, after a few seconds showed an error message "Download Fail, Port not Available". Then I had remove the battery to start my phone in the mormal mode. As I have said above, I had to approach Lenovo Service center to recover my Lenovo VIBE K5 Plus_A6020a46. They recovered it and installed the oldest OS version for it. It had many problems with that version, such as draining battery very soon and heating issues etc. I could not update it with Lenovo companion app. It downloaded the 156MB update, but during installation it showed a weird OTA error. I tried it for 5 times, but the result was always the same.
So I searched for the latest update ROM in the internet (A6020a46_S048_16070 1_ROW) I got it from an Russian Lenovo Community website. I extrated the zip file (A6020a46_S048_16070 1_ROW_QPST.zip). There were many ota update files and a "system" update file. I copied that "system.zip" file to the phones SD card and updated from there using recovery mode. It was successful.
If someone is in need of the Latest ROM (1.34 GB) for the Lenovo VIBE K5 Plus_A6020A46 go to:- http_//phonedl.ota.lenovomm.com/dls/v6/A6020a46_S048_160701_ROW_WC39DE8CCE.zip
add " : " instead of underscore " _ " after http in the link
or just copy and paste in the URL bar :- phonedl.ota.lenovomm.com/dls/v6/A6020a46_S048_160701_ROW_WC39DE8CCE.zip
Use the ota update referring to your country .
Click to expand...
Click to collapse
You're suposed to hold volume + AND volume - at the same time (just as the power button) for 5 seconds, then your phone is going to be with led and black screen.
rafaellancas said:
You're suposed to hold volume + AND volume - at the same time (just as the power button) for 5 seconds, then your phone is going to be with led and black screen.
Click to expand...
Click to collapse
:good: thank you for your help. Could you please explain it little more step by step . When should I hold both Vol + and Vol - keys together. :angel:
rafaellancas said:
You're suposed to hold volume + AND volume - at the same time (just as the power button) for 5 seconds, then your phone is going to be with led and black screen.
Click to expand...
Click to collapse
thank you for your help. Could you please explain it little more step by step . When should I hold both Vol + and Vol - keys together.
Jintu Jose said:
thank you for your help. Could you please explain it little more step by step . When should I hold both Vol + and Vol - keys together.
Click to expand...
Click to collapse
With the phone turned off and disconected from your computer, you press and hold the following buttons: volume + and - and power, for five seconds, then your phone should be black and with a red led. Now you connect to your computer and check if QFIL recognizes the port (this is the hardest part, to install and make QFIL work on windows), then it's just like the guide
rafaellancas said:
With the phone turned off and disconected from your computer, you press and hold the following buttons: volume + and - and power, for five seconds, then your phone should be black and with a red led. Now you connect to your computer and check if QFIL recognizes the port (this is the hardest part, to install and make QFIL work on windows), then it's just like the guide
Click to expand...
Click to collapse
Wow ! That worked .... thanks .... thanks a lot ... this was the key point I missed... you saved my day and phone
Jintu Jose said:
Wow ! That worked .... thanks .... thanks a lot ... this was the key point I missed... you saved my day and phone
Click to expand...
Click to collapse
I'm glad to help man
Is there any possibility to recover a dead phone? It is the same model (Lenovo Vibe K5 Plus A6020a46). It shows only red led when connected to a power source. Can't turn the power on, none of the key combinations works, no boot screen, no images nothing. It is totally dead except for the red LED.
Jintu Jose said:
Is there any possibility to recover a dead phone? It is the same model (Lenovo Vibe K5 Plus A6020a46). It shows only red led when connected to a power source. Can't turn the power on, none of the key combinations works, no boot screen, no images nothing. It is totally dead except for the red LED.
Click to expand...
Click to collapse
I don't know man, but I would try to download the QFIL image for the a6020l46 and give it a try, but, before you try it, let it charge for about 3 hours, then take off the battery and pot it on again and try to enter the mode for QFIL (volume + and - and power button pressed and hold for 5 seconds).
Same problem here
I have a bricked lenovo vibe k 5 (A6020I37) in qfil says sahara fail, and the pc recognizes my phone as Qualcomm HS-USB QDLoader 9008. From here I dont know what to do, I already tried with lenovo smart assistance but stops at 3%.
I hope you can help me to, and thank you all for your the help u can bring me.
Pleaseee anyone can help meeeee?????
Hello
I have a big problem with my lenovo vibe p1 that was under android aosp 4.5
I had the zip of the custom roms android aosp 4.6 of September 2017 I put it in the micro sd and I launch the recovery twrp I install the zip then I reboot and it is the drama ca do more 'an hour that my phone is blocking under the lenovo logo and adb does not recognize my phone I can not even turn it off so please do?
even the qfile software does not recognize my phone while I hear the windows sound when I plug my phone to my pc
up
basically I explain my problem
I had as custom roms on my lenovo vibe p1 the android aosp 4.5 so I had a notification of an update of my custom roms (the 4.6) I download it and i install it via my custom recovery twrp flash the zip but the ca is almost 4 hours that my smartphone is blocking on the lenovo logo at startup and nothing happens it is not recognized by adb nor by qfile and when I press the power button it goes out but also turns back on the lenovo logo at startup so please do?
help me please
help me please
I have a lenovo vibe k5 plus smartphone, which i erased accidentally, complete emmc erased. Now my phone won't start. It is neither booted into fastboot nor adb, not even recovery. When i plug it into my PC, red LED is on and it is automatically detected as Qualcomm HS-USB QDLoader 9008. I have tried qfil, Tool studio, QDloader, and even Miflash,but nothing worked.
Qfil says: QSahara error,
Tool studio: MPRG.mbn download failed,
QDLoader: send result,
Miflash: Reached end packet, can not receive hello packet.
if anyone can help me please tell me a proper way to recover/unbrick my phone Thanks in advance.
sahirali920 said:
I have a lenovo vibe k5 plus smartphone, which i erased accidentally, complete emmc erased. Now my phone won't start. It is neither booted into fastboot nor adb, not even recovery. When i plug it into my PC, red LED is on and it is automatically detected as Qualcomm HS-USB QDLoader 9008. I have tried qfil, Tool studio, QDloader, and even Miflash,but nothing worked.
Qfil says: QSahara error,
Tool studio: MPRG.mbn download failed,
QDLoader: send result,
Miflash: Reached end packet, can not receive hello packet.
if anyone can help me please tell me a proper way to recover/unbrick my phone Thanks in advance.
Click to expand...
Click to collapse
Perdonnaly I would suggest QFil :
- remove the battery
- put it back
- push volume + and - and plug your phone at the same time
- be careful to use qpst 2.7.430 (you can find it on other threads)
Sent from my Lenovo Vibe K5 Plus using XDA Labs
I have tried qfil of qpst 2.7.422, 2.7.430, 2.7.437 and 2.7.472 but nothing worked.