Related
hi,
any help is hugely appreciated.
I wiped my phone in recovery with the option to wipe for new custom rom, this worked fine. when i went to install custom rom it failed and then turned itself off. now the phone just gets stuck at the Sony logo. the only way i can turn it off is via the red button in the sim slot.
I am unable to connect to the computer at all, no fastboot. I'm also unable to boot into recovery to restore.
Please help. Hope i haven't ****ed it up beyond fixing
Thanks
Flash a stock ftf with flashtool (in flashmode). You should definitely get into flashmode and fastboot, otherwise there is a problem with your computer.
Funny, I didn't even know there was a red button Holding Volume Up + Power for a few seconds always worked for me, no matter in which state the phone was.
Hi all,
I've exactely the same problem !!!
My phone stuck to Sony logo, and not reconyze on my 3 PC.... before that, usb connexion work fine on all PC, but now.... nothing
I've just POWER + and VOL+ (its power off the phone), i've no led color light
I've try flashboot, but not detect my phone
i've try to install :
flashtool-0.9.16.1-windows (not detected)
Flashtool-drivers-1.5-20140318 (my computer doesnt not see my phone)
Xperia_Z1_Compact_driver (my computer doesnt not see my phone too)
I can't go into Flashmode...
When i power off my Z1c, and i plug usb + (vol+) nothing appear...stuck Sony logo...
I'm lost... I need your help XDA members ! just U can help me
PS : the red button is in the SIM slot, but i think is same POWER + (VOL+).... its power off the phone
Because you're doing it wrong. Vol+ enters fastboot mode, you have to press Vol- to enter flashmode. Then use Flashtool to restore the firmware.
Iruwen said:
Because you're doing it wrong. Vol+ enters fastboot mode, you have to press Vol- to enter flashmode. Then use Flashtool to restore the firmware.
Click to expand...
Click to collapse
THX for your response !
Sorry it's a mistake....
I've try both (vol+ and USB) and (vol- and USB).... but no sound (device not detected), in device manager nothing appear too.
I've make a fresh install of windows 7 x64 on another PC.
I finaly working to boot (2-3 times) with Vol- + USB cable, but stay in sony logo and Flashtool whait for device...
Please i need u're help beacause i'm really lost (usualy i flash many phone S4, Mediatek, phones, etc...) but now i dont find solution
My problem come from the original cable
All this because of the USB cable does not work ... CRAZY !
This USB cable is new and original sony... just 2 Weeks
I solved my problem with new one
That's unfortunate, good you found the issue.
Hi guys,
I request your urgent help. Yesterday I tried to install a Marshmallow custom ROM (pac_A6020_MM.Alpha.1.Official_20160704-204606) in my Lenovo VIBE K5 Plus A6020a46. Now it seems bricked. I can boot into fastboot mode but not into the recovery mode. When I turn on, it it is just stuck on Lenovo Logo screen. I cannot flash with QFIL as the port is not detected on my Windows 10 Laptop. What should I do? Please help.
Download stock ROM and twrp recovery and flash twrp recovery in fastboot mode. Then flash stock ROM using twrp recovery. That's it.
cityengineers said:
Download stock ROM and twrp recovery and flash twrp recovery in fastboot mode. Then flash stock ROM using twrp recovery. That's it.
Click to expand...
Click to collapse
Thank you for your reply. But now device is not shown in adb command line "adb device". So I cant continue. Neither QFIL recognize the device port.
Please check the screenshot : http_//imgur_com/nMu7sfe
I've faced the same problem that you have said mobile didn't detect by the PC, that's USB driver problem, make sure you installed USB drivers for your device, if not then install USB drivers for your device, then only PC can detect your device. Then flash the twrp and flash the stock ROM via twrp.
try using QLIP and press the volume + button
http://www.mediafire.com/download/1...1.2_BMAIN_16G_ROW_otafull+By+GSMDevelopers.7z
http://www.mediafire.com/download/u4b8uzz4dy454a2/A6020a46+SDcard+upgrade+SOP.doc
here is a link for firmware and instructions
Password - gsmdevelopers.com
Thank you all dear friends for your timely help. But in my case none of the methods above worked completely. I couldn't flash my Vibe K5 Plus with QFIL because it never detected the port. When I tried restarting the phone holding Volume + key, port just showed up and when I clicked on download button in QFIL, the phone restarted, the port disappeared and nothing happened. So, that method also failed.
Now I just showed the problem at Lenovo Service center. They made it, but installed a very old version (A6020a46_S024) of OS from which I could not update to the latest one (A6020a46_S048_160701_ROW). It showed some ota error after downloading almost 156MB. Luckily I could find the latest ROM (A6020a46_S048_160701_ROW) from the Russian Lenovo Forum. It helped me to update my Lenovo Vibebe K5 Plus_A6020a46 to the latest version. Once again thank you all. :good:
Jintu Jose said:
Thank you all dear friends for your timely help. But in my case none of the methods above worked completely. I couldn't flash my Vibe K5 Plus with QFIL because it never detected the port. When I tried restarting the phone holding Volume + key, port just showed up and when I clicked on download button in QFIL, the phone restarted, the port disappeared and nothing happened. So, that method also failed.
Now I just showed the problem at Lenovo Service center. They made it, but installed a very old version (A6020a46_S024) of OS from which I could not update to the latest one (A6020a46_S048_160701_ROW). It showed some ota error after downloading almost 156MB. Luckily I could find the latest ROM (A6020a46_S048_160701_ROW) from the Russian Lenovo Forum. It helped me to update my Lenovo Vibebe K5 Plus_A6020a46 to the latest version. Once again thank you all. :good:
Click to expand...
Click to collapse
Please write the method how to updated it if you used QFIL. I think a lot of users can get help from your experience!
For drivers, install QDLoader HS-USB Driver drivers (google them)
and if you still can not detect any HS USB port in device manager but see an ADB Interface port. upgrade drivers of ADB port with QDLoader HS-USB Driver you downloaded earlier
This will detect your phone,
Good Luck!
QFIL was not useful for me. When I started the phone holding Volume+ button it detected the port and when clicked on the download button in QFIL the phone restarted after 3-5 seconds with blank screen, after a few seconds showed an error message "Download Fail, Port not Available". Then I had remove the battery to start my phone in the mormal mode. As I have said above, I had to approach Lenovo Service center to recover my Lenovo VIBE K5 Plus_A6020a46. They recovered it and installed the oldest OS version for it. It had many problems with that version, such as draining battery very soon and heating issues etc. I could not update it with Lenovo companion app. It downloaded the 156MB update, but during installation it showed a weird OTA error. I tried it for 5 times, but the result was always the same.
So I searched for the latest update ROM in the internet (A6020a46_S048_16070 1_ROW) I got it from an Russian Lenovo Community website. I extrated the zip file (A6020a46_S048_16070 1_ROW_QPST.zip). There were many ota update files and a "system" update file. I copied that "system.zip" file to the phones SD card and updated from there using recovery mode. It was successful.
If someone is in need of the Latest ROM (1.34 GB) for the Lenovo VIBE K5 Plus_A6020A46 go to:- http_//phonedl.ota.lenovomm.com/dls/v6/A6020a46_S048_160701_ROW_WC39DE8CCE.zip
add " : " instead of underscore " _ " after http in the link
or just copy and paste in the URL bar :- phonedl.ota.lenovomm.com/dls/v6/A6020a46_S048_160701_ROW_WC39DE8CCE.zip
Use the ota update referring to your country .
Lenovo K5 Plus Firmware (Latest)
Here is the latest stock ROM for Lenovo Vibe K5 Plus A6020a46
Release Date : 17/08/2016
Lenovo K5 Plus - Firmware A6020a46_S054_160817_16G_ROW_QPST
Download (1.17 GB)
:good:
Jintu Jose said:
QFIL was not useful for me. When I started the phone holding Volume+ button it detected the port and when clicked on the download button in QFIL the phone restarted after 3-5 seconds with blank screen, after a few seconds showed an error message "Download Fail, Port not Available". Then I had remove the battery to start my phone in the mormal mode. As I have said above, I had to approach Lenovo Service center to recover my Lenovo VIBE K5 Plus_A6020a46. They recovered it and installed the oldest OS version for it. It had many problems with that version, such as draining battery very soon and heating issues etc. I could not update it with Lenovo companion app. It downloaded the 156MB update, but during installation it showed a weird OTA error. I tried it for 5 times, but the result was always the same.
So I searched for the latest update ROM in the internet (A6020a46_S048_16070 1_ROW) I got it from an Russian Lenovo Community website. I extrated the zip file (A6020a46_S048_16070 1_ROW_QPST.zip). There were many ota update files and a "system" update file. I copied that "system.zip" file to the phones SD card and updated from there using recovery mode. It was successful.
If someone is in need of the Latest ROM (1.34 GB) for the Lenovo VIBE K5 Plus_A6020A46 go to:- http_//phonedl.ota.lenovomm.com/dls/v6/A6020a46_S048_160701_ROW_WC39DE8CCE.zip
add " : " instead of underscore " _ " after http in the link
or just copy and paste in the URL bar :- phonedl.ota.lenovomm.com/dls/v6/A6020a46_S048_160701_ROW_WC39DE8CCE.zip
Use the ota update referring to your country .
Click to expand...
Click to collapse
You're suposed to hold volume + AND volume - at the same time (just as the power button) for 5 seconds, then your phone is going to be with led and black screen.
rafaellancas said:
You're suposed to hold volume + AND volume - at the same time (just as the power button) for 5 seconds, then your phone is going to be with led and black screen.
Click to expand...
Click to collapse
:good: thank you for your help. Could you please explain it little more step by step . When should I hold both Vol + and Vol - keys together. :angel:
rafaellancas said:
You're suposed to hold volume + AND volume - at the same time (just as the power button) for 5 seconds, then your phone is going to be with led and black screen.
Click to expand...
Click to collapse
thank you for your help. Could you please explain it little more step by step . When should I hold both Vol + and Vol - keys together.
Jintu Jose said:
thank you for your help. Could you please explain it little more step by step . When should I hold both Vol + and Vol - keys together.
Click to expand...
Click to collapse
With the phone turned off and disconected from your computer, you press and hold the following buttons: volume + and - and power, for five seconds, then your phone should be black and with a red led. Now you connect to your computer and check if QFIL recognizes the port (this is the hardest part, to install and make QFIL work on windows), then it's just like the guide
rafaellancas said:
With the phone turned off and disconected from your computer, you press and hold the following buttons: volume + and - and power, for five seconds, then your phone should be black and with a red led. Now you connect to your computer and check if QFIL recognizes the port (this is the hardest part, to install and make QFIL work on windows), then it's just like the guide
Click to expand...
Click to collapse
Wow ! That worked .... thanks .... thanks a lot ... this was the key point I missed... you saved my day and phone
Jintu Jose said:
Wow ! That worked .... thanks .... thanks a lot ... this was the key point I missed... you saved my day and phone
Click to expand...
Click to collapse
I'm glad to help man
Is there any possibility to recover a dead phone? It is the same model (Lenovo Vibe K5 Plus A6020a46). It shows only red led when connected to a power source. Can't turn the power on, none of the key combinations works, no boot screen, no images nothing. It is totally dead except for the red LED.
Jintu Jose said:
Is there any possibility to recover a dead phone? It is the same model (Lenovo Vibe K5 Plus A6020a46). It shows only red led when connected to a power source. Can't turn the power on, none of the key combinations works, no boot screen, no images nothing. It is totally dead except for the red LED.
Click to expand...
Click to collapse
I don't know man, but I would try to download the QFIL image for the a6020l46 and give it a try, but, before you try it, let it charge for about 3 hours, then take off the battery and pot it on again and try to enter the mode for QFIL (volume + and - and power button pressed and hold for 5 seconds).
Same problem here
I have a bricked lenovo vibe k 5 (A6020I37) in qfil says sahara fail, and the pc recognizes my phone as Qualcomm HS-USB QDLoader 9008. From here I dont know what to do, I already tried with lenovo smart assistance but stops at 3%.
I hope you can help me to, and thank you all for your the help u can bring me.
Pleaseee anyone can help meeeee?????
Hello Guys,
I need the RAW files to download please could anyone please indicate a link or upload the ROM please? I've been on my phone for more than 3 weeks and can not find anywhere.
Thank you very much for the attention of all. A big hug!
http://dlcdnet.asus.com/pub/ASUS/Ze...59.353408663.1494812275-1536164900.1482540343
BahaStriker said:
http://dlcdnet.asus.com/pub/ASUS/Ze...59.353408663.1494812275-1536164900.1482540343
Click to expand...
Click to collapse
Hello Baha Striker!
How did you get the flash in this ROM? What tool did you use? I'm trying to use QFIL because it was the only one that recognized my device. But I'm having trouble locating .XML to do the flash and finally fix my device.
My device does not turn on, it only recognizes in windows task manager like qualcomm hs-usb qdloader 9008. Thanks a lot for the help.
landognr said:
Hello Baha Striker!
How did you get the flash in this ROM? What tool did you use? I'm trying to use QFIL because it was the only one that recognized my device. But I'm having trouble locating .XML to do the flash and finally fix my device.
My device does not turn on, it only recognizes in windows task manager like qualcomm hs-usb qdloader 9008. Thanks a lot for the help.
Click to expand...
Click to collapse
Hey mate, I had the same issue before I know it seems that it's the only way that your phone get recognized with but in matter of fact if you keep trying to boot on fastboot it'll boot there eventually.. so keep trying the keys combination till it works and a reminder fastboot on this device is when it stays on Asus logo screen so when you get there just flash recovery and install your ROM like normal
BahaStriker said:
Hey mate, I had the same issue before I know it seems that it's the only way that your phone get recognized with but in matter of fact if you keep trying to boot on fastboot it'll boot there eventually.. so keep trying the keys combination till it works and a reminder fastboot on this device is when it stays on Asus logo screen so when you get there just flash recovery and install your ROM like normal
Click to expand...
Click to collapse
Ok friend, let me see if I get it. Do I keep trying until my phone goes into fastboot? Does he eventually enter? So all I have to do is press the power button + vol up and keep trying until an ASUS logo appears? Thank you so much for helping, my friend, God bless you!
BahaStriker said:
Hey mate, I had the same issue before I know it seems that it's the only way that your phone get recognized with but in matter of fact if you keep trying to boot on fastboot it'll boot there eventually.. so keep trying the keys combination till it works and a reminder fastboot on this device is when it stays on Asus logo screen so when you get there just flash recovery and install your ROM like normal
Click to expand...
Click to collapse
Hello Baha,
I tried today all day to make this device go into fastboot mode but I did not succeed. I try the combinations Power + vol up, Power + vol down, only power and all the buttons.
Could you kindly explain me better how you got into your device's fastboot mode? Was it connected to the charger or pc or was it disconnected?
Thank you
Fastboot mode :
1) Turn off the ASUS ZENFONE 3 DELUXE ZS570KL
2) Press and hold Volume Up button (do not release and continue to No.3)
3) Press and hold Power button (No.2 still continue press and hold), so now we hold Volume Up Button + Power Button together
4) Wait until vibrate appear at ASUS ZENFONE 3 DELUXE ZS570KL, then release Power button (do not release Volume Up button)
5) If we see Logo appear at LCD screen, then release Volume Up button (release all button now)
Alguma solução para nosso zenfone 3 deluxe ?
arquivos Qfil para zenfone 3 deluxe ?
Ok guys,just I need help ,I can get to the fasboot ,my pc recognize my Asus zenphone deluxe3 (2,15) I have ADB and fasboot instaled Just I tried many times flash twrp and no luck....my bootloader is locked and my Asus in in bootloop ...ale what I can do ,is just to boot in fasboot....so how can I instal twrp? Is there any chance?
quotation
WW-15.0210.1810.73 stock recovery & RAW
Database--https://drive.google.com/drive/folders/0By3NdBos6w6JZEloNDFMaDVxS0U
willinko23 said:
Ok guys,just I need help ,I can get to the fasboot ,my pc recognize my Asus zenphone deluxe3 (2,15) I have ADB and fasboot instaled Just I tried many times flash twrp and no luck....my bootloader is locked and my Asus in in bootloop ...ale what I can do ,is just to boot in fasboot....so how can I instal twrp? Is there any chance?
Click to expand...
Click to collapse
Same promlem, I hope somebody can help us out
This guide is to recover the Zuk Z2 (plus) from hard brick state
So you might be stuck here -
Phone is not turning on
Phone Reboot and screen go black with notification light on and you are unable to switch it off.
How To-
1. How to switch it off
- First this is happening because you have locked you're bootloader
- You have black screen and led on so just hold power button then Zuk logo will be flash after that you will get black screen again and the phone is preparing to reboot but before that the led will get turn off immediately release power button.
(It's crucial timing but when rebooting your device vibrates so it's the time when phone is about to start vibrate while LED is off just leave power button)
- You have it Your phone is switched off
(Tip- Let it reboot once after that don't leave the power button and after that led will get off you have to remove finger from power button this is tricky )
2. Going to Bootloader
-First connect the USB to laptop
-After you have switched off your phone press volume up and down together and with holding buttons connect the phone to USB and you will see the fastboot mode.
3. Unlock your phone
-Remember the unlock bootloader file in your email re download it and unlock your bootloader again
- Don't reboot right away as you don't have any OS installed Even if it boot it might give problem.
- after unlocking phone you will see phone rebooted press power button reboot press volume the volume button and go to reboot option
4. For Userdata
- I suggest you to flash recovery instead of using old installed one.
- go to fastboot and flash the TWRP.
- Boot into TWRP and you will see your data on internal storage is present so just sideload ROM or if you have in internal storage just flash
( Note- in case you are using TWRP 3.4 newer roms with factory based ROM will flashed without problem in case you are trying to flash old Oreo non-treble ROMs you need to wipe like you do for normal ROM installation and reboot to recovery then flash Oreo Non-treble ROM otherwise they will not boot even after flashing)
Or
- QFIL ZUI 4.0.199ST as this QPST
- When selecting the XML file select retain userdata one so it won't erase your userdata partitions
5. In case you want to flash ZUI
- Load files in QFIL
- To reboot phone into EDL from Fastboot mode type following command
Code:
fastboot -i0x2b4c oem reboot-edl
- It will get detected in QFIL just hit Download.
In case you run into Sahara failed error follow my guide to fix sahara error
[url]https://forum.xda-developers.com/lenovo-zuk-z2/themes/how-to-fix-common-sahara-errors-t4168535[/URL]
Hit thanks if helped:good:
xtra sharif said:
This guide is to recover the Zuk Z2 (plus) from hard brick state
Scenario is as follow-
Phone is not turning on
Always Zuk logo comes and screen go black with notification light glowing and you are unable to switch it off
How To-
1. How to switch it off
-firstly this is happening because you have locked you're bootloader
- You have black screen and led on so just hold power button then Zuk logo will be flash after that you will get black screen again and again the phone was preparing to reboot but before that the led will get turn off immediately release power button
- You have it Your phone is switched off
(Let it reboot once after that don't leave the power button and after that led will get off for small time this is the time you have to remove finger from power button this is tricky )
2. Going to Bootloader
-Firstly connect the USB to laptop
-after you have switched off your phone press volume up and down together and with holding buttons connect the phone to USB and you will see the fastboot mode
3. Unlock your phone
-Remember the unlock bootloader file in your email re download it and unlock your bootloader again
- after unlocking phone you will see phone rebooted press power button reboot press volume the volume button and go to reboot option
- go to fastboot and flash the TWRP and you will see that your data on internal storage is present so flash any ROM and you will see your data
Hit thanks if helped:good:
Click to expand...
Click to collapse
thanks, you saved my life.:laugh:
Phone not turning on, only white light blink
xtra sharif said:
Hi Please help me.
Today morning phone not turning up. while pressing any combination, only while light blinks. When connect to charger same white light blink.
Phone is not vibrating.
Click to expand...
Click to collapse
saumis84 said:
xtra sharif said:
Hi Please help me.
Today morning phone not turning up. while pressing any combination, only while light blinks. When connect to charger same white light blink.
Phone is not vibrating.
Click to expand...
Click to collapse
press the power button for longer duration.
Click to expand...
Click to collapse
PrincE.. said:
saumis84 said:
press the power button for longer duration.
Click to expand...
Click to collapse
Hey thanks for responding.
So i have tried every combination mentioned on internet, saw the deep flash method as well(but didn't attempt.)
Left my phone untoched for full day.
switched my regular charger to moto turbo charger and volla my phone booted!
PS: there was only single white light blink while pressing power button and when connected to charger it blinks continually with no vibration.
Click to expand...
Click to collapse
Saved me
Thanks, this saved my phone.
I struggled with key combination to get into fastboot but finally got in and recovered my zuk.
xtra sharif said:
This guide is to recover the Zuk Z2 (plus) from hard brick state
Scenario is as follow-
Phone is not turning on
Always Zuk logo comes and screen go black with notification light glowing and you are unable to switch it off
How To-
1. How to switch it off
-firstly this is happening because you have locked you're bootloader
- You have black screen and led on so just hold power button then Zuk logo will be flash after that you will get black screen again and again the phone was preparing to reboot but before that the led will get turn off immediately release power button
- You have it Your phone is switched off
(Let it reboot once after that don't leave the power button and after that led will get off for small time this is the time you have to remove finger from power button this is tricky )
2. Going to Bootloader
-Firstly connect the USB to laptop
-after you have switched off your phone press volume up and down together and with holding buttons connect the phone to USB and you will see the fastboot mode
3. Unlock your phone
-Remember the unlock bootloader file in your email re download it and unlock your bootloader again
- after unlocking phone you will see phone rebooted press power button reboot press volume the volume button and go to reboot option
- go to fastboot and flash the TWRP and you will see that your data on internal storage is present so flash any ROM and you will see your data
Hit thanks if helped:good:
Click to expand...
Click to collapse
nadddy said:
Thanks, this saved my phone.
I struggled with key combination to get into fastboot but finally got in and recovered my zuk.
Click to expand...
Click to collapse
Hey I have a hardbricked zuk but the only signs of life is a white led and at times a vibration when I connect it to pc there is a a port written as Qualcomm HS-USB Diagnostics 900E (COM4) . I've seen quite a lot of threads of booting it to edl and deep flashing is not a choice I'm willing to take . I'd appreciate it if you are able to help me
thanks
Thanks a lot buddy.
Bricked today by flashing a baseband.
Revived as per your guide.
Actually i'm never tensed about flashing roms, Kernels, fonts, apps, mods anything and bricking our device.
There are so many good guys to save our a$$...................
Thanks buddies....... :good::good::good::good:
On android 9 i flashed preloader and ik, then installed custom rom(pixel expierience). I used it for a week. For some reason, i think either fingerprint or battery. The phone shut down.
When I press the power button, it turns on, does not show redmi logo then switches off after 2 seconds. When I charge, it does the same thing repeatedly. SInce the screen switches off after a second, I cannot boot to fastboot or recovery. If I press power and volume up, it goes to the preloader menu, when I press normal boot or recovery, it shuts down again. I do not know what to do now. Do I use miflash or sp flash tools. Or do I have to do to send it to mi service center.
I cannot let the battery drain because It automatically switches off.
Im not sure whether I have to charge it or drain it. For some reason the phone keeps switching on when charging then shutting down.
Any help would be appreciated.
Why did you flash preloader and lk image and then download custom rom? So to fix it I can only advice to take off battery.
Try this...
Posted it yesterday message me if you need some help...
My post is here.
whiteside21 said:
On android 9 i flashed preloader and ik, then installed custom rom(pixel expierience). I used it for a week. For some reason, i think either fingerprint or battery. The phone shut down.
When I press the power button, it turns on, does not show redmi logo then switches off after 2 seconds. When I charge, it does the same thing repeatedly. SInce the screen switches off after a second, I cannot boot to fastboot or recovery. If I press power and volume up, it goes to the preloader menu, when I press normal boot or recovery, it shuts down again. I do not know what to do now. Do I use miflash or sp flash tools. Or do I have to do to send it to mi service center.
I cannot let the battery drain because It automatically switches off.
Im not sure whether I have to charge it or drain it. For some reason the phone keeps switching on when charging then shutting down.
Any help would be appreciated.
Click to expand...
Click to collapse
So if you already flash preloader and lk file then you can easily unbrick your device using sp flash tool without any authorise account. Just download any fastboot rom for your redmi note 8 pro and install mi flash pro tool or sp flash tool in your pc/mac. And then in sp flash tool select scatter file which is on images in your download rom and select da and auth file which is in your install location generally in your c drive. After select all files click on download and after that plug in usb with your device while holding vol up button then it will flash rom automatically. Only you need to wait some time. But keep in mind if you don't flash those preloader and lk file then you need authorise account for flashing.
I hope this will help.