Related
Hello everyone!
Perhaps you know me, I'm trying to revive the NANDROID on our beloved HTC Thouch HD, aka Blackstone.
I want to thank to XDAndroid developers team & detule, they create & make it possible/available with pathes on gitorious or others site for the SD kernel source and a GBX tree!
Thank to Arganis31 for the great work on Blackstone LK!!! { LK source, soon on the git from Arganis31 }
Of course deepest of respect to [ACL] for everythings!
And everyone who i forget!!!
Please note :
- I don’t take any responsibility for any damage to your device! So use at your own risk!!!
- My kernel source is here: https://gitorious.org/linux-msm-blac-nand/linux-msm-blac-nand
- Change Log – 2 post ; Install – 3 post
- This is not an official GBX release, rather something I compiled from the current GBX tree.
- This is work in progress, so there may be minor or major problems
- Please attach your getlogs if you have some problem, thank you
Main problem is:
- Shutdown / reboot { just hang on } not working need reset or battery pull out.
- 3D not really good so if i enabled HW3D than i get a blank screen :/ { gralloc or kernel pmem issue??? }
- Any others are working, like SD version or just better.
I am a only who are working on the Blac Nand Kernel & setup the ROM right, Im updating g3rm0 git source with some good stuff, I can say that now i got it a lot of better funkcionality on nand. Nearly everythings updated on source. For example new acoustic code working on nand and audio fully working, with BT audio too!!!
Any help are welcome and thanked If you think that's right.
Downloads: http://code.google.com/p/nandroid-for-htc-blackstone/downloads/list
Necessary files and older downloads : http://www.mediafire.com/?85m45naii6dpk
Big Thank to all my donators: ( included SD/NAND too )
- uberto.costanzo
- wanpaopao
- Drifft Art
- Osiris
- Roland
- Philippe
- Etoxus
- Nick Brown
- Disaster
- William Botteldoorn
- FazZ
- adamph
if i forget anyone from the list, please send a pm me! Thanks
Good luck!
Best regards,
fagyi
Change Log
2013-01-20 Change log
- Synced with the latest source 2013.01.13.
- ICS wallpaper
- JellyBean animations
- JellyBean Clock widget backported
- Videocamera support
- Speed improved
- Battery life improved!
- Tweaked framework-res with some ics stuff ( res tweaks )
- Tweaked system apps with some ics sfuff ( smali & res tweaks )
- Statusbar its transparent. ( smali tweak )
- MBB - MegaBassBeats support - Thank you DeHuMaNiZeD all credit goes to him!
- Haptic feedback disabled by default.
- Enabled non-market app install by default.
- Youtube LQ mode working
- PlayStore fixes | /cache/download linked to /mnt/sdcard/cache-download
- Latest PlayStore and Gmail merged
2012-11-30 Change log from the release
- Synced with the latest source 2012.11.29
- Custom wallpaper
- Custom bootanimation - Thank you Sandmann, all credit goes to him for this.
- Light gapps it was preinstalled, note your market its PlayStore and not updating automatically ( marketupdater removed ) | showed up in the menu when you enable the internet connection & synced with google.
- Some tweak
- Zipaligned
- Native App 2 SD support - Now you really can moving app to the sdcard
- Wifi support - need trick with Sdcard!
- Best speed on NAND
-Wifi FIX with SDCARD inserted-
Confirmed, not only for me worked!
badzed said: ↑
I found a way how to enable wifi with scdard inserted.
1. Remove SD card.
2. Reset your phone.
3. When phone begin boot insert SD card.
-IMPORTANT. Insert SD card BEFORE begin android boot.
-Try insert when you see blue fastboot screen.
4. Turn on WiFi.
Thank you badzed, nice found!!!
Kernel
- Native App 2 SD support
- Wifi support
- Battery update
- Netflix support - ( need for Droidwall, iptable )
2012-10-02
- Synced with the latest google source 2012.09.25.
- Stock Theme
- Gsensor working now
- Battery usage : 9 hr 17 min -> 18 % lost -> sleep mode
- Incoming ringtone working on default. Cyantone ported from ICS and setting up to the default ringtone. I just love this ringtone.
- Audio rebuild to the latest htc-acoustic_wince
- Audio fully working on nand, you need forget the trick / Fixed on kernel with new audio routing!
- Build.prop setup
- Boot.img configurations updated ( big )
- Better overall speed.
- Hardware key vibrating
- Htc One X bootanimation
- Launcher changed to the latest free launcherPro version
- Stripped Gapps
- Zipaligned
- Camera support ( Just photo, no video so far )
- Bluetooth support ( fully working )
- Native a2sd support. - Removed from the Build because with this camera not work.
- Darktremor Apps2SD support ( need ext2 partition on your sdcard )
Kernel
- h2w support ( new headset )
- New acoustic_wince code base and neccessary modification for blackstone - Fully working
- Shutter in music? not anymore
- Added camera support and neccessary drivers - Fully working
- Battery changes for the better life
- Config updated
- BT updates - Fully working
- Clock-wince changes
- Improved shutdown and reboot funkcion. - seems to be need fixes
2012-09-28 – Testing release { got some fixes from the before list but not at all }
Install
You need charging your battery minimum to 70% in Windows Mobile before starting everythings !!!
do not play with less value if you dont know what do you do!!!
* All files ready which you need on downloads place.
Installation guide from Windows Mobile to the Android:
Thanks to FazZ & Nick Brown! Great work!
1. Flash the latest HardSPL from OliNex
2. Extract the 'adb files & fastboot.exe' files to a folder and grab the latest recovery-XY.img from Necessary files and older downloads. Place it in the same older and rename it to recovery.img
3. Format the microSD card fully as FAT32
4. Copy the 'BlacIMG.NBH' file and your selected ROM (zip) you wish to use to the root of the microSD
5. Boot in TriColour mode (Power button and Volume down button)
6. Whilst in the TriColour mode, connect the Blackstone to a USB port ('Serial' should now say 'USB')
7. Run 'BlackstoneRUUAdvanced' and select the 'Task 29' which is full wipe of the Blackstone
8. Once completed, insert the microSD card and reboot into the TriColour mode again
9. The Blackstone will auto-flash-install (after key confirmation) the 'BlacIMG.NBH' on the microSD card
10. The 'BlacIMG.NBH' must NOT be flashed via Windows using the RUU tool (it will only fail)
11. Once flashed with the 'BlacIMG.NBH' it will reboot to a new Fastboot screen (blue background)
Note: the phone won't automatically reboot, you have to reboot it manually
12. After a short time the Blackstone in Fastboot mode with enter a USB connect ready state
13. Now connect the Blackstone to your Windows OS and open a CLi/Command prompt
14. Within CLi go to the directory where you place the 'adb files & fastboot.exe' files (from step 2)
15. Type: fastboot flash recovery recovery.img (this will flash install the custom CWR)
Note: The "recovery.img" file has to be in the same directory as fastboot.exe. It is in the "Necessary Files" download folder of the 1st post.
16. Then type: fastboot boot recovery.img (this will reboot your Blackstone into CWR)
17. In CWR use the Volume keys to move up and down, and the Power button to select
18. First thing to do in the recovery screen is press Volume-Up, Volume-Down, Volume-Up, then you will see a message at the bottom of the screen that says
'Back menu button enabled' , after power button using for the selecting in the menu!
19. You are now finally ready to install your chosen ROM that is on your microSD
20. Once installed, let it reboot into Android OS which takes about 5 minutes on the first run
21. Once the Blackstone has settled within the OS (you can see the typical Android home screen), reboot
22. This time round, it should only take about a minute to start and you can now start using you NAND ROM
Installation guide from before versions or another Android to the New Android:
1. You need make one reboot and pressing power key on fastboot screen - this will booting your Blackstone into CWR)
2. In CWR use the Volume keys to move up and down, and the Power button to select
3. First thing to do in the recovery screen is press Volume-Up, Volume-Down, Volume-Up, then you will see a message at the bottom of the screen that says
'Back menu button enabled' , after power button using for the selecting in the menu!
4. You are now go to mounts & storage option and format boot and system partitions
5. Back to the Main options in CWR and make one wipe data/factory reset!
6. You are now finally ready to install your chosen ROM that is on your microSD
7. Once installed, let it reboot into Android OS which takes about 5 minutes on the first run
8. Once the Blackstone has settled within the OS (you can see the typical Android home screen), reboot
9. This time round, it should only take about a minute to start and you can now start using you NAND ROM
Reserved for the future
--------- Reserved ---------
Hey, i dont want to be ungrateful, youre doing a great job, but the most important fact is to get wifi working, without wifi there is nearly no sense for android...
thanks for your work
Hi, the installation is to complecated for me (for the moment) (also beacause I'm a french speaker). So as soon as it will be easier for me to understand, i'll try it.
Thank you for bringing balckstone back to live. Keep going.
Use the thanks button.
Thanks
great Rom
If necessary i could help translate into german/french
Thx Fagyi
work great than the others roms.
^^
test it since yesterday..
everything is ok, but my ram is very low.
maybe the next rom from Fagyi be better again.
i'm waiting for it.
sorry for my english...
thx Fagyi :good:
After leaving my Blackstone sitting in the dark for quite some time, I think it's time to take it out and flash something new.
Good job OP. But as mentioned, wifi is the most urgent stuff to be fixed. If you need testers I would gladly help, just pm me
he's trying... It's really hard you know
boot.img install
Hi,
Giving your ROM a try. All installed well and Android came up OK. My only question is about the boot.img installation. How do I install it and what does it do?
If android is running, your boot.img is installed (boot.img is included in the flashable .zip
btw, you dont have blackstone on your sig... this is only for blackstones!
---------- Post added at 02:50 PM ---------- Previous post was at 02:50 PM ----------
oh, and boot.img is the kernel
mfsr98 said:
If android is running, your boot.img is installed (boot.img is included in the flashable .zip
btw, you dont have blackstone on your sig... this is only for blackstones!
---------- Post added at 02:50 PM ---------- Previous post was at 02:50 PM ----------
oh, and boot.img is the kernel
Click to expand...
Click to collapse
Thanks, that's what I thought but just wanted to make sure.
My blackstone isn't in my sig because it is my "play" device. But if this ROM is stable and can be used as my regular phone, I may finally replace my Rhod210 running WM6.5 and make that one my play phone.
This ROM is stable, a lot faster than SD ROMs and as some functions that even work better than on SD! (like bluetooth) If you can survive w/o wifi, you're good to go!
mfsr98 said:
This ROM is stable, a lot faster than SD ROMs and as some functions that even work better than on SD! (like bluetooth) If you can survive w/o wifi, you're good to go!
Click to expand...
Click to collapse
Wifi is good to have, but I can live without it if I must. BT, GPS, phone & battery life are crucial to me for navigation and music in my car so if those 2 work and 3G, I can give it a real try.
then yes, you are good to go
the only thing that can go wrong is battery life but try it out and see for yourself.
mfsr98 said:
then yes, you are good to go
the only thing that can go wrong is battery life but try it out and see for yourself.
Click to expand...
Click to collapse
Well, now that it is up and running, I'll reinstall via Titanium from my Rhodium all my apps and give it a good run. Hopefully, I'll be back in a few days with GREAT reports!!!:fingers-crossed:
good luck
Hello guys,
8 years after the release of my 4.1.2 rooted rom, I retrieved my 101 xs and I updated my rom. So here it is, an updated 4.1.4 rom, rooted and optimized that you can install now (don't forget to make backups of course).
I mainly got the tweaks from BlueAndroid: http://forum.xda-developers.com/showthread.php?t=2073859
What I did
Retrieved build.prop enhancements and init.d tweaks from BlueAndroid
Updated busybox to 1.32-Stericsson
Updated CA certs from my recent Samsung phone, because the stock ones were expired
Removed ui sounds completely, I dislike them
Added custom host file for blocking ad servers
Added Viper4Android 2.4.0.1 (was Awesome Beats on 4.1.2)
Added Sony Walkman (music player)
Added Mixplorer v6.57.1 and MixArchive
Added Seeder (entropy generator to reduce lag)
I didn't do any UI tweaks (I'm not good at this). If someone wants, just do it. If you want to build your own version of the rom, I've made a script that builds the patched rom from the stock file. It runs under Linux or WSL. You'll have to download mkrom.zip and androidmerged.squashfs. Unzip the zip and place the squashfs file in the same directory. Then run mkrom.sh, and if everything goes well you should get a file named archos.ext4, ready to be installed (see Installation below).
Also I tried putting more recent versions of Google Play Store and Archos apps in the system/app folder, but when I did this, the apps were not working correctly, so I left them as their old versions. If someone has an explanation, please tell me
Download
Version 1: Archos_4.1.4_Mwyann_1.zip
Installation
I'm just gonna copy/paste BlueAndroid installation instructions here:
Install Developer Edition if you didn't already
connect USB cable & check if USB debugging is already enabled !
put archos.ext4 in your device ( root directory ! ) , or using adb command :$ adb push archos.ext4 /mnt/storage ;
go to recovery -> Developer Edition Menu -> Remove Android Kernel ( if exist ! ) -> Flash Kernel & Initramfs -> copy here zImage and initramfs.cpio.lzo in the new drive that appears !
OK -> wait to reboot -> enjoy the new rom
Don't hesitate to tell me if it worked or not, and what you think of this.
Hi!
I have tried to install it, but when I restart the device it just do not want to boot.
It freez ad the Archos logo screen!
What I am doing wrong!
I have dongraded my device to 4.0.26 version.
After that I have enabled the USB debuging.
Than I have installed the SDK version from Archos web site.
Restart and paste your firmware.
Restart again and flash the zImage and initramfs.cpio.lzo (deleting ar not the Archos Kernel - no matter the result is the same - freez).
And nothing. Any help?!?!
Thanks!
PS: May be there is something wrong with your zImage and initramfs.cpio.lzo files, because with the files from this post it works.
So it did work with the new zImage and initramfs.cpio.lzo files? It's possible I just took the wrong files, from 4.1.1. I'll update those files soon.
Edit: Files updated to 4.1.2, should be fine now.
I will trythis method on the 97xs
Great It is ok
if you use the 4.0.26 !!!
doesn't work for me, "Usb connection : please copy a zImage and an initramfs, then press ok to disconnect" i used adb to put
THANKS for your THANKS :good:
Bump to this thread, because I've updated it after 8 years Enjoy a fresh 4.1.4 rom, rooted and updated as far as I could.
Hello Xda,
I am trying to get the latest AudioFX 2.2.0 from CM to work on our J510 with MM.
The packagename is org.cyanogenmod.audiofx
So far I cannot get it to work. What I have done so far:
- installed AudioFX.apk
- copied audio_effects.conf from CM to /vendor/etc (override the stock /etc/audio_effects.conf)
- checked if all libs matched from stock ROM with audio_effects.conf and CM
- copied CM version of /system/lib/soundfx/libeffectproxy.so
- created /etc/permissions/org.cyanogenmod.audiofx.xml (maybe necessary?)
- installed CMAudioService (with CM libcmaudio_jni.so)
The AudioFX GUI works fine, but no effects. The goal is to not overwrite any stock files
so I can go back to SoundAlive if needed by renaming /vendor/etc/audio_effects.conf
In logcat nothing special.
Does someone knows how to get it to work on stock Samsung MM?
Thanks
Think this is not going to work.
AudioFX uses CM libaudioeffect_jni.so and that uses some functions in CM libmedia.so that are not in stock libmedia.so.
Replacing libmedia.so causes bootloops on my device.
Oh well, was nice try.
DESCRIPTION
As you all know, MIUI Camera has been ported to Mi5 (gemini) from MI A1 by @stars2 which seems to work on Redmi 3S too. So I decided to create a thread about it so that every Redmi 3S users gets notified about it.
Also as mentioned by @stars2 in his thread https://forum.xda-developers.com/mi-5/themes/app-miui-camera-ported-xiaomi-mi-a1-t3670607 that to add full features on other devices rename the MiuiCamera.apk/assets/decvice_features.xml/gemini.xml file to our own device codename. And as it difficult for a normal user to decompile, edit and recompile the apk, I done that thereby, unlocking all the features.
NOTES
THIS IS NOT MY WORK. THIS IS DONE BY @stars2. I'M JUST SHARING HIS WORK
V7 IS ORIGINALLY MADE BY @maxsmeller. I HAVE JUST MODIFIED THE APK AND RECOMPILED THE ZIP. SO ALL CREDITS GOES TO HIM.
V8 IS ORIGINALLY MADE BY @shreyas_kulkarni. I HAVE JUST MODIFIED THE APK AND RECOMPILED THE ZIP . SO ALL CREDITS GOES TO HIM.
ALL FEATURES COMPATIBLE WITH LAND HAS BEEN UNLOCKED
BASE UPDATED TO OREO (NOW FULLY COMPATIBLE WITH 8.x & 9.x ROM'S
V12 & V13 IS ONLY FOR 9.x ROM'S
WHAT CHANGES I DID IN V1?
- DECOMPILED MIUICAMERA.APK
- EXTRACTED GEMINI.XML
- RENAMED GEMINI.XML TO LAND.XML
- REPLACED GEMINI.XML WITH LAND.XML
- RECOMPILED MIUI CAMERA.APK
- REPLACED NEW MIUI CAMERA. APK IN THE FLASHABLE ZIP FILE
WHAT CHANGES I DID IN V2 ?
- REMOVED GROUP SELFIE OPTION FROM THE APK
- DELETED GROUP SELFIE LIBS
- RECOMPILED ZIP
WHAT CHANGES I DID IN V3 ?
- BROUGHT BACK GROUP SELFIE OPTION
- FULLY FIXED GROUP SELFIE
- RECOMPILED ZIP
WHAT CHANGES I DID IN V4 ?
- ADDED SCENE MODE
- RECOMPILED ZIP
WHAT CHANGES I DID IN V5 ?
- DECOMPILED MIUICAMERA.APK
- EXTRACTED GEMINI.XML
- RENAMED GEMINI.XML TO LAND.XML
- REPLACED GEMINI.XML WITH LAND.XML
- CHANGED CAMERA ICON
- RECOMPILED MIUI CAMERA.APK
- RECOMPILED NEW FLASHABLE ZIP
WHAT CHANGES I DID IN V6 ?
- DECOMPILED MIUICAMERA.APK
- EXTRACTED GEMINI.XML
- RENAMED GEMINI.XML TO LAND.XML
- REPLACED GEMINI.XML WITH LAND.XML
- CHANGED CAMERA ICON
- RECOMPILED MIUI CAMERA.APK
- RECOMPILED NEW FLASHABLE ZIP
- BROUGHT BACK "Save To SDCard" OPTION
- TWEAKS FOR HDR (CAMERA 2 API HAS TO BE DISABLED)
WHAT CHANGES I DID IN V7 ?
- USED THE PORT BY @maxsmeller https://forum.xda-developers.com/xiaomi-redmi-3s/themes/miui-camera-port-mod-hdr-denoise-t3685529
- MODIFIED THE APK (CHANGED ICON)
- RECOMPILED ZIP
WHAT CHANGES I DID IN V8 ?
- USED THE PORT BY @shreyas_kulkarni http://www.mediafire.com/file/86lk4..._ROMs]Ultimate_MIUI_Cam_MOD_By_SK21122000.zip
- MODIFIED THE APK (CHANGED ICON)
- MODDED TO WORK IN 8.x OREO
- RECOMPILED ZIP
WHAT CHANGES I DID IN V8.1 ?
- ADDED "Save To SDCard" OPTION
WHAT CHANGES I DID IN V9 ?
- PORTED CAMERA FROM MI A1 STOCK OREO ROM
WHAT CHANGES I DID IN V10 ?
-ENABLED ALL FEATURES WHICH WERE MISSING IN V9
WHAT CHANGES I DID IN V11?
- PORTED FROM MI A2 STOCK ROM
WHAT CHANGES I DID IN V12?
- MADE COMPATIBLE WITH 9.x ROM'S
WHAT CHANGES I DID IN V13?
- PORTED FROM LATEST MI A2 ROM
- ADDED BEAUTIFY 3.0
- ADDED SOME MISSING OPTIONS
- FIXED SOME BUGS
HOW TO INSTALL
- REBOOT TO RECOVERY
- SELECT THE FILE
- SWIPE TO CONFIRM FLASH
- WIPE CACHES/DALVIK
- REBOOT
- GO TO SETTINGS - APPS - CAMERA AND GIVE ALL PERMISSIONS
- FOR USERS WHO ALREADY FLASHED V1 DELETE "MiuiCamera" FOLDER FROM "system/priv-app" THEN FLASH V2
- FOR USERS WHO ALREADY FLASHED V2, NORMALLY FLASH V3
- FOR USERS WHO ALREADY FLASHED V3 DELETE "MiuiCamera" FOLDER FROM "system/priv-app" THEN FLASH V4
- FOR USERS WHO ALREADY FLASHED V4 DELETE "MiuiCamera" FOLDER FROM "system/app" THEN FLASH V5
- FOR USERS WHO ALREADY FLASHED V5 DELETE "MiuiCamera" FOLDER FROM "system/app" THEN FLASH V6
- FLASH V7 NORMALLY FROM TWRP AND WIPE CACHES/DALVIK
- FOR USERS WHO ALREADY FLASHED V7 FLASH UNINSTALLER THEN FLASH V8.
- FOR USERS WHO ALREADY FLASHED V8, NORMALLY FLASH V8.1
- BEFORE FLASHING V11, FLASH UNISTALLER
HOW TO UNINSTALL
- REBOOT TO RECOVERY
- FLASH UNINSTALLER
- WIPE CACHES/DALVIK
- REBOOT
DISCLAIMER
I'M NOT RESPONSIBLE FOR ANYTHING. TRY THIS ON YOUR OWN RISK.
BUGS
- AGE & GENDER
- TIME AND DATE STAMP
- BEAUTIFY FIXED IN V13
- SLOW MOTION RECORDING DOESN'T WORK, BECAUSE IT'S NOT SUPPORTED BY LAND HARDWARE. SET VIDEO RECORDING QUALITY TO SD (480p) TO GET SLOW MOTION WORKING.
CREDITS
- @stars2
- @maxsmeller
- @shreyas_kulkarni
- Me
DOWNLOADS
V1 https://drive.google.com/file/d/0B7fIOZZgI8cVeG40THRPeEN5UUE/view?usp=drivesdk
V2 https://drive.google.com/file/d/0B7fIOZZgI8cVMGhUUkFLU1hIN2M/view?usp=drivesdk
V3
https://drive.google.com/open?id=0B7fIOZZgI8cVMWVuZnpFa04tR0U
V4
https://drive.google.com/file/d/0B7fIOZZgI8cVSG43LXZGS2QwZVk/view?usp=drivesdk
V5
https://drive.google.com/file/d/0B7fIOZZgI8cVRElvN3N6b2ZLX2s/view?usp=drivesdk
V6
https://drive.google.com/file/d/0B7fIOZZgI8cVYkJBNlBUVmN1elk/view?usp=drivesdk
V7
https://drive.google.com/file/d/0B7fIOZZgI8cVZi1tNFJvbW1lUWs/view?usp=drivesdk
V8
https://drive.google.com/file/d/1sUKpvrc4ceKQzhXdKoOLBkOnmpVuAb8K/view?usp=drivesdk
V8.1
https://drive.google.com/file/d/1v91MiceHymkC83l7O3wSAbjcQDt0dgGH/view?usp=drivesdk
V9
https://drive.google.com/file/d/1Y_bkVf3mGOQKF-mcPu-hiwGVov7n8oaN/view?usp=drivesdk
V10
https://drive.google.com/file/d/1Eyo84ecsw0pp79IxPHE6taAhvDfWr2Tk/view?usp=drivesdk
V11
https://drive.google.com/file/d/1FMz5OLAvrX11DCLgPGk6jeyNqrVzzn62/view?usp=drivesdk
V12
https://drive.google.com/file/d/1K6nCReakpoC-67i81nNxM8IBBBCLqTpB/view?usp=drivesdk
V13
https://drive.google.com/file/d/1SEN0X55e4LfTAqWXM61yZ8fW3og9QBpI/view?usp=drivesdk
UNINSTALLER
https://drive.google.com/file/d/0B7fIOZZgI8cVMTA4MTRBdnlDb1k/view?usp=drivesdk
XDA DevDB INFORMATION
MIUI CAMERA FOR REDMI 3S/PRIME/PLUS/X
CREATED - 2017-09-17
STABLE BETA DATE - 2018-11-19
LAST UPDATED - 2018-11-19
downloading
I would highly recommend all users to try this port. Solution for dark video in custom roms(personally tested). HDR works well!
@mizdrake7, someone in the group reported that HDR doesn't work with camera2api. Care to test and include that in the OP?
william.johhn7! said:
I would highly recommend all users to try this port. Solution for dark video in custom roms(personally tested). HDR works well!
@mizdrake7, someone in the group reported that HDR doesn't work with camera2api. Care to test and include that in the OP?
Click to expand...
Click to collapse
HDR works with camera 2 api
Awesome work! @mizdrake7
Awesome work!! Now no more dark video recording and bad photo quality on our beloved nougat custom roms???
Okay , thank you , and please fix the remaining bug
---------- Post added at 09:01 PM ---------- Previous post was at 08:58 PM ----------
can i install this camera on Marshmallow cusrom?
Sakti Adrian said:
Okay , thank you , and please fix the remaining bug
---------- Post added at 09:01 PM ---------- Previous post was at 08:58 PM ----------
can i install this camera on Marshmallow cusrom?
Click to expand...
Click to collapse
Yes
mizdrake7 said:
Yes
Click to expand...
Click to collapse
Bootloop while installing on ZenUi 3.0 Roms :laugh:
Can't connect to camera
Tested on aex,aosip and xperience ROM.
I'm on RR latest and app says can't connect to camera,someone please provide solution.
****update****
Solved that issue,just go to permissions of apps and grant all permission. Now camera will work like stock.
Interesting development. Not working on my LOS 14.1, though. With or without camera2api enabled.
Update: it works with Avik423's solution. Thank you very much!
It works on aex and rr if you give permissions. Thanks.
The camera quality is still not that good..
Works on the last Remix. You have to manually grant permissions as you wrote earlier. Thank you.
What's group selfie function in this camera, doesn't see in stock miui camera MM
bootloop on miui 9 v7.9.8 build
any upload the stock miuicamera for my rom? havent took any backup -_-
After moving from mi I was really missing mi stock cam ,but wasn't willing to go back just for cam?
BUT NOW ITS LIKE DREAM COMES TRUE...????
just flash 7.9.8 recovery should fix the problem
Works great no RR..now im not going back to miui..thanx
ROM SIRIUZ V 2.7 - EMUI 8.0 HUAWEI HONOR 9 Lite LITEGPU-TURBO AROMA INSTALLERDONOT COPY MY WORK, Ask for Permissions
Code:
-
- I am not responsible for the damage of your cell phone if you do not correctly perform the steps
- loser warranty
- if you are not sure better not to touch and leave this page
COMPATIBLE WITH
with all versions, Huawei HONOR 9 lite
remember to know your original compilation if at any time you want to return to stock.
for example LLD-L24C25 with this data you can return to stock.
REQUIREMENTS:
- EMUI 8.0.0
- Activate the OEM unlocking, which is in adjustment / developer options and leave it so forever to avoid conflict.
- unlock the bootloader.
- install the recovery that I will leave, automated from windows-linux
DETAILS OF THE ROM
ROM SIRIUZ 2.7
- Base firmware Honor 9 lite (August security patch).
- Turbo GPU updated.
- VoLte Activated.
- font of themas activated.
- Huawei ID Integrated and corrected.
- Magisk 16.8.
- percentage activated by default.
ROM SIRIUZ 2.6
- Firm base Honor 9 lite (security patch for July).
- MorfuzKernel 2.1 selinux Permissive.
- Turbo GPU.
- Added support init.d.
- Added busybox.
- Huawei ID.
- Boot profile for the Darknnes-Blu_Active kernel within init.d improves performance.
- Magisk 16.7.
- Gboard keyboard.
- Dual speaker activated.
- New Boot logo.
- Added custom watermark for honor 9 lite.
- I delete the data space.
- Deodexed (improves optimization).
- Improvements in the quality of photos, video and sound ..
- I eliminate unnecessary Google applications ..
- Added call recorder.
- Youtube modification (function in the background).
- Musica huawei Crack added.
- Multi-user X5 activated.
- Change of keyboard, google.
- Reduction of the size of the icons.
- Glove mode activated.
- Mtu 1500
- Improved scanned files.
- The main screen design 4x5 was added.
- More dual cloning social network applications were added.
- Installation mode AROMA-INSTALLER.
- Music: stock or crack.
- Camera: stock, Mate10Pro or P20Pro.
- Root: Magisk or Supersu.
- Navbar, uses the fingerprint sensor as a navigation bar.
- Solid Explorer, Kernel Auditor, Quick Reboot.
- MxPlayer.
- Sony Music.
ROOT MAGISK NOTICE
- If you select root magisk, the OEM will be deactivated.
- enter the developer's options and activate the OEM.
- Added more applications of social networks of Twin cloning
. * facebook, faceboot lite
. * messenger, messenger lite
. * whatsapp, whatsapp mod
. * instagram
. * snapchat
. * telegram
. * twitter
. * mega
. * creativefrends
. * microsoft officE
INSTALLATION MODE:
- guard the rom in an external memory.
- turn off the cell phone press the plus and power buttons until you have the TWRP window
- Press WIPE
- Press FORMAT DATA
- Write the word "yes" without quotes and accept, just do the work
- Press BACK to go back several times to the main window.
- Press WIPE, then ADVANCE WIPE
- verify that the partition DATA this in the f2fs extension
- mark: Dalvik, cache, data, internal storage, system
- IMPORTANT !: do not mark "micro sdcard and cust".
- once you have marked, slide the "swipe to wipe" arrow to clear it.
- go back to the main sale, press INSTALL
- press SELECT STORAGE
- Switch to Micro SDCard to find the rom.
- Look for the SiriuZ rom and flash
- At the end of the installation press "wipe davilk-cache", wait for it to finish.
- reboot system.
- congratulations now will start the rom SiriuZ
Contributors:
CATUVA21
ROM OS Version: LLD-L
ROM Kernel: Stock
ROM Firmware Required: EMUI 8.0.0
Version Information:
Status: Stable
Created on: 2018-08-22
Last Updated on: 2018-08-12
Images
ROM SIRIUZ 2.7 EMUI 8.0
ROM SIRIUZ 2.7 EMUI 8.0
https://mega.nz/#!0cY3nAbC!b9LLa3FJpA7oscDAouGfjz6oz0md5Ef3xmjIofVWlbk
Module_modem
the kernel morfuz works very well before the update of the TURBO GPU, after the update is failing incoming and outgoing calls, I created this module for root magisk (17.1) and the kermel MORFUZ WORKS very well
OBSERVATION: only use if incoming and outgoing calls do not work.
do not copy this module, you can publish in other modified kernel with the respective credits
https://mega.nz/#!MqhHUQoI!3fdEZdBRuUMuxoympGrjAq9VD5peSI3a5PhzDQe-CDc
Init.d is pre-installed and to work correctly you must install Init.d_Injector-v1.4.zip from TWRP or from Magisk as module, this to activate the selinux in permissive mode and the change of governors to Darknnes-Blu_Active.
TELEGRAM GROUP -new group
https://t.me/joinchat/ERAhfQ8kyF6_iH5nMun5dg
If you appreciate my work the donations link is below.
R2
I have complete flash and restart, but the hanging up screen check up, please please make me
Any body try this rom?
By far the most stable rom for honor 9 lite
I tried this rom and was amazed by the results, the camera has been improved to a great extent and device works smoothly. The screen hanging problem could be solved by flashing morfuz 2.1 kernel. Thanks buddy.
P.S. - A request if you could provide a working link for dolby or v4a module of magisk for emui 8 there was no zip of dolby in the above mentioned link.
this rom bricked my phone. i tried to restore my twrp backup, but also twrp is locked on splash screen. i don't know how to solve problem. i tries to downnload various update.app, but the update process failed.
edit: i solved installing the version 2 of twrp by pretorian 80
Edit2: camera don't works
CH Play
not active
after installing this rom lost imei and camera don't work. any solution? there's a safe way to return to stock rom without brick the phone?
wetito said:
after installing this rom lost imei and camera don't work. any solution? there's a safe way to return to stock rom without brick the phone?
Click to expand...
Click to collapse
Use huru updater to revert back to stock firmware
What Gapps to use?
---------- Post added at 07:52 PM ---------- Previous post was at 07:16 PM ----------
invalid cen header (bad signature) what i get when trying to open in es file explorer pro?
Any updates for this rom yet?
Thread closed until download links are available that are not pay per click.
Edit: Thread reopened.