Hello everyone!
Perhaps you know me, I'm trying to revive the NANDROID on our beloved HTC Thouch HD, aka Blackstone.
I want to thank to XDAndroid developers team & detule, they create & make it possible/available with pathes on gitorious or others site for the SD kernel source and a GBX tree!
Thank to Arganis31 for the great work on Blackstone LK!!! { LK source, soon on the git from Arganis31 }
Of course deepest of respect to [ACL] for everythings!
And everyone who i forget!!!
Please note :
- I don’t take any responsibility for any damage to your device! So use at your own risk!!!
- My kernel source is here: https://gitorious.org/linux-msm-blac-nand/linux-msm-blac-nand
- Change Log – 2 post ; Install – 3 post
- This is not an official GBX release, rather something I compiled from the current GBX tree.
- This is work in progress, so there may be minor or major problems
- Please attach your getlogs if you have some problem, thank you
Main problem is:
- Shutdown / reboot { just hang on } not working need reset or battery pull out.
- 3D not really good so if i enabled HW3D than i get a blank screen :/ { gralloc or kernel pmem issue??? }
- Any others are working, like SD version or just better.
I am a only who are working on the Blac Nand Kernel & setup the ROM right, Im updating g3rm0 git source with some good stuff, I can say that now i got it a lot of better funkcionality on nand. Nearly everythings updated on source. For example new acoustic code working on nand and audio fully working, with BT audio too!!!
Any help are welcome and thanked If you think that's right.
Downloads: http://code.google.com/p/nandroid-for-htc-blackstone/downloads/list
Necessary files and older downloads : http://www.mediafire.com/?85m45naii6dpk
Big Thank to all my donators: ( included SD/NAND too )
- uberto.costanzo
- wanpaopao
- Drifft Art
- Osiris
- Roland
- Philippe
- Etoxus
- Nick Brown
- Disaster
- William Botteldoorn
- FazZ
- adamph
if i forget anyone from the list, please send a pm me! Thanks
Good luck!
Best regards,
fagyi
Change Log
2013-01-20 Change log
- Synced with the latest source 2013.01.13.
- ICS wallpaper
- JellyBean animations
- JellyBean Clock widget backported
- Videocamera support
- Speed improved
- Battery life improved!
- Tweaked framework-res with some ics stuff ( res tweaks )
- Tweaked system apps with some ics sfuff ( smali & res tweaks )
- Statusbar its transparent. ( smali tweak )
- MBB - MegaBassBeats support - Thank you DeHuMaNiZeD all credit goes to him!
- Haptic feedback disabled by default.
- Enabled non-market app install by default.
- Youtube LQ mode working
- PlayStore fixes | /cache/download linked to /mnt/sdcard/cache-download
- Latest PlayStore and Gmail merged
2012-11-30 Change log from the release
- Synced with the latest source 2012.11.29
- Custom wallpaper
- Custom bootanimation - Thank you Sandmann, all credit goes to him for this.
- Light gapps it was preinstalled, note your market its PlayStore and not updating automatically ( marketupdater removed ) | showed up in the menu when you enable the internet connection & synced with google.
- Some tweak
- Zipaligned
- Native App 2 SD support - Now you really can moving app to the sdcard
- Wifi support - need trick with Sdcard!
- Best speed on NAND
-Wifi FIX with SDCARD inserted-
Confirmed, not only for me worked!
badzed said: ↑
I found a way how to enable wifi with scdard inserted.
1. Remove SD card.
2. Reset your phone.
3. When phone begin boot insert SD card.
-IMPORTANT. Insert SD card BEFORE begin android boot.
-Try insert when you see blue fastboot screen.
4. Turn on WiFi.
Thank you badzed, nice found!!!
Kernel
- Native App 2 SD support
- Wifi support
- Battery update
- Netflix support - ( need for Droidwall, iptable )
2012-10-02
- Synced with the latest google source 2012.09.25.
- Stock Theme
- Gsensor working now
- Battery usage : 9 hr 17 min -> 18 % lost -> sleep mode
- Incoming ringtone working on default. Cyantone ported from ICS and setting up to the default ringtone. I just love this ringtone.
- Audio rebuild to the latest htc-acoustic_wince
- Audio fully working on nand, you need forget the trick / Fixed on kernel with new audio routing!
- Build.prop setup
- Boot.img configurations updated ( big )
- Better overall speed.
- Hardware key vibrating
- Htc One X bootanimation
- Launcher changed to the latest free launcherPro version
- Stripped Gapps
- Zipaligned
- Camera support ( Just photo, no video so far )
- Bluetooth support ( fully working )
- Native a2sd support. - Removed from the Build because with this camera not work.
- Darktremor Apps2SD support ( need ext2 partition on your sdcard )
Kernel
- h2w support ( new headset )
- New acoustic_wince code base and neccessary modification for blackstone - Fully working
- Shutter in music? not anymore
- Added camera support and neccessary drivers - Fully working
- Battery changes for the better life
- Config updated
- BT updates - Fully working
- Clock-wince changes
- Improved shutdown and reboot funkcion. - seems to be need fixes
2012-09-28 – Testing release { got some fixes from the before list but not at all }
Install
You need charging your battery minimum to 70% in Windows Mobile before starting everythings !!!
do not play with less value if you dont know what do you do!!!
* All files ready which you need on downloads place.
Installation guide from Windows Mobile to the Android:
Thanks to FazZ & Nick Brown! Great work!
1. Flash the latest HardSPL from OliNex
2. Extract the 'adb files & fastboot.exe' files to a folder and grab the latest recovery-XY.img from Necessary files and older downloads. Place it in the same older and rename it to recovery.img
3. Format the microSD card fully as FAT32
4. Copy the 'BlacIMG.NBH' file and your selected ROM (zip) you wish to use to the root of the microSD
5. Boot in TriColour mode (Power button and Volume down button)
6. Whilst in the TriColour mode, connect the Blackstone to a USB port ('Serial' should now say 'USB')
7. Run 'BlackstoneRUUAdvanced' and select the 'Task 29' which is full wipe of the Blackstone
8. Once completed, insert the microSD card and reboot into the TriColour mode again
9. The Blackstone will auto-flash-install (after key confirmation) the 'BlacIMG.NBH' on the microSD card
10. The 'BlacIMG.NBH' must NOT be flashed via Windows using the RUU tool (it will only fail)
11. Once flashed with the 'BlacIMG.NBH' it will reboot to a new Fastboot screen (blue background)
Note: the phone won't automatically reboot, you have to reboot it manually
12. After a short time the Blackstone in Fastboot mode with enter a USB connect ready state
13. Now connect the Blackstone to your Windows OS and open a CLi/Command prompt
14. Within CLi go to the directory where you place the 'adb files & fastboot.exe' files (from step 2)
15. Type: fastboot flash recovery recovery.img (this will flash install the custom CWR)
Note: The "recovery.img" file has to be in the same directory as fastboot.exe. It is in the "Necessary Files" download folder of the 1st post.
16. Then type: fastboot boot recovery.img (this will reboot your Blackstone into CWR)
17. In CWR use the Volume keys to move up and down, and the Power button to select
18. First thing to do in the recovery screen is press Volume-Up, Volume-Down, Volume-Up, then you will see a message at the bottom of the screen that says
'Back menu button enabled' , after power button using for the selecting in the menu!
19. You are now finally ready to install your chosen ROM that is on your microSD
20. Once installed, let it reboot into Android OS which takes about 5 minutes on the first run
21. Once the Blackstone has settled within the OS (you can see the typical Android home screen), reboot
22. This time round, it should only take about a minute to start and you can now start using you NAND ROM
Installation guide from before versions or another Android to the New Android:
1. You need make one reboot and pressing power key on fastboot screen - this will booting your Blackstone into CWR)
2. In CWR use the Volume keys to move up and down, and the Power button to select
3. First thing to do in the recovery screen is press Volume-Up, Volume-Down, Volume-Up, then you will see a message at the bottom of the screen that says
'Back menu button enabled' , after power button using for the selecting in the menu!
4. You are now go to mounts & storage option and format boot and system partitions
5. Back to the Main options in CWR and make one wipe data/factory reset!
6. You are now finally ready to install your chosen ROM that is on your microSD
7. Once installed, let it reboot into Android OS which takes about 5 minutes on the first run
8. Once the Blackstone has settled within the OS (you can see the typical Android home screen), reboot
9. This time round, it should only take about a minute to start and you can now start using you NAND ROM
Reserved for the future
--------- Reserved ---------
Hey, i dont want to be ungrateful, youre doing a great job, but the most important fact is to get wifi working, without wifi there is nearly no sense for android...
thanks for your work
Hi, the installation is to complecated for me (for the moment) (also beacause I'm a french speaker). So as soon as it will be easier for me to understand, i'll try it.
Thank you for bringing balckstone back to live. Keep going.
Use the thanks button.
Thanks
great Rom
If necessary i could help translate into german/french
Thx Fagyi
work great than the others roms.
^^
test it since yesterday..
everything is ok, but my ram is very low.
maybe the next rom from Fagyi be better again.
i'm waiting for it.
sorry for my english...
thx Fagyi :good:
After leaving my Blackstone sitting in the dark for quite some time, I think it's time to take it out and flash something new.
Good job OP. But as mentioned, wifi is the most urgent stuff to be fixed. If you need testers I would gladly help, just pm me
he's trying... It's really hard you know
boot.img install
Hi,
Giving your ROM a try. All installed well and Android came up OK. My only question is about the boot.img installation. How do I install it and what does it do?
If android is running, your boot.img is installed (boot.img is included in the flashable .zip
btw, you dont have blackstone on your sig... this is only for blackstones!
---------- Post added at 02:50 PM ---------- Previous post was at 02:50 PM ----------
oh, and boot.img is the kernel
mfsr98 said:
If android is running, your boot.img is installed (boot.img is included in the flashable .zip
btw, you dont have blackstone on your sig... this is only for blackstones!
---------- Post added at 02:50 PM ---------- Previous post was at 02:50 PM ----------
oh, and boot.img is the kernel
Click to expand...
Click to collapse
Thanks, that's what I thought but just wanted to make sure.
My blackstone isn't in my sig because it is my "play" device. But if this ROM is stable and can be used as my regular phone, I may finally replace my Rhod210 running WM6.5 and make that one my play phone.
This ROM is stable, a lot faster than SD ROMs and as some functions that even work better than on SD! (like bluetooth) If you can survive w/o wifi, you're good to go!
mfsr98 said:
This ROM is stable, a lot faster than SD ROMs and as some functions that even work better than on SD! (like bluetooth) If you can survive w/o wifi, you're good to go!
Click to expand...
Click to collapse
Wifi is good to have, but I can live without it if I must. BT, GPS, phone & battery life are crucial to me for navigation and music in my car so if those 2 work and 3G, I can give it a real try.
then yes, you are good to go
the only thing that can go wrong is battery life but try it out and see for yourself.
mfsr98 said:
then yes, you are good to go
the only thing that can go wrong is battery life but try it out and see for yourself.
Click to expand...
Click to collapse
Well, now that it is up and running, I'll reinstall via Titanium from my Rhodium all my apps and give it a good run. Hopefully, I'll be back in a few days with GREAT reports!!!:fingers-crossed:
good luck
Related
HELLO EVERYONE, I WILL NOT BEABLE TO MAKE ANY MORE UPDATES FOR THIS BUILD. REASON IS, I DON'T HAVE FREE TIME ANYMORE, IM GOING TO BACK TO SCHOOL AND WORKING ATM. THE 2ND REASON IS, IVE ENCOUNTERED PROBLEMS WITH MY COMPUTER THAT MADE ME LOSE ALL MY DATA AND SAVED STUFF(BUMER). THANKS TO EVERYONE WHO SUPPORTED ME TO LEARN AND MAKE ALL THIS. THANKS TO ALL MY DONATORS, THANK YOU VERY MUCH, I REALLY MEAN IT!!. I WILL DEFINITELY COME BACK IF TIME ALLOWED.
If You still want to use the UltimateDroid rom, Crawlingcity will be making new roms and updates in his new thread so please go there and thank him..
http://forum.xda-developers.com/showthread.php?t=938326
WElcome to JDMS Series
CHECK POST 4 FOR THE GOODIES!?? CLICK ME_________________________________________________________________________________________________________________________________
About JDMS
Me,crawlingcity and mattfmartin got together on irc and decided to work as a team to provide you guys BEST non sense build up date. Its based off Ultimate Droid 2.5 which is based on clean AOSP source.We worked on it for 2 days and we got the results, ITS FREAKING FAST!!! I hope you guys will like it just like we are.
_________________________________________________________________________________________________________________________________
CLICK ME OR SUFFER!
IMPORTANT=READ!!This build has something new to the hd2 community, custom commands. You can find them in the ultimate menu (settings -> ultimate (1st menu)). You can mess around all you want, but be advised, there some dangerous and powerful commands there, if you don't know what you're doing, don't touch them
DISCLAIMERThis build is provided as is. Everything works with the kernel provided (hastarin 8.5.1_oldcam). If you change to another kernel such as MDJ and something stops working, we won't be hold responsible. If you change anything and still complain, your post will be ignored.
Features
cedesmith initrd used
You can read Arabic letters in websites now
FM Radio
512mb data.img included in the build, if you want more,download them from the extras.
Stable PPP connection, no need for an rmnet build...(Thanks to latema)
Fast speed build without lagg or sod
Pretty cool theme
Automatic brightness works 100%
LedMeKnow app included to control led notifications..
hot reboot
fix_permission
changing fonts on the fly (requires hot reboot and an active internet connection)
changing bootscreens (requires hot reboot and an active internet connection)
Download and install custom apps with a simple click
hot reboot
and many more! discover for yourself
Working
Everything is working for me...
Installition and tips
Extract the Android folder (with all files in in) to root of your SD Card. THIS IS IMPORTANT.
- You canot keep your data.img from other roms... Do a clean install please..(You can try if you want but don't come here crying )
- If you already have an Android folder on your SD Card DELETE IT OR RENAME IT, because this version MAY BE INCOMPATIBILE with older releases !!!
- After copyng everything to your SD Card ensure you have at least 600 Mb free space for data store
- After you have done all steps go into Android folder and tap CLRCAD (for working sound), and after that just tap HaRET.
- If you get some strange errors, or Android does not work, try to reformat SD card and try everything from the start.
If that does not help, I suggest you to change your rom and radio with my personal ones(Check my siggy!!!)
DOWNLOADS!!
JDMS 1.6.2 ULTIMATE!! [SD VERSION CHECK POST 4 FOR NAND VERSION]
PLEASE REBOOT AFTER FIRST BOOT IF YOU WANT EVERYTHING TO WORK!!Extras
262mb data.img
512mb data.img
1GB Data.Img
2GB data.img
3Gb data.img
4B data.img
Wifi Tethring
USB tethring
Special thanks
Cotulla
Blackdroid
richardtrip
cedesmith for the new initrd (great work!)
Kouno.Takaak
dan1j3l
hastarin
huanyu
michyprima
Cass67 - Specially
darkstone
ElbartoME
gauner1986
mattc
memin1857
NetRipper
shu8i
lucian777
V-b-n
copenhagen
Beta Testers..
Everyone on #htc-linux & #htc-linux-chat, devs at xda-forums
If You appreciate my work, feel free to buy me a cup of coffee or rate thread to keep me motivated
Screenshots
Changelogs
Changelogs
v1.6.2
• updated to UD 2.5
-Updated Build to FRG83D
-Option to install the new android market (UD Extras)(IT DID NOT WORK FOR ME)
-Add setting to hide notification pulldown after clicking a power widget button
-Added customizable live wallpapers
-Moved trash can to bottom by default
-Updated Mms App
-Added the ability to hide the notification pulldown on change
• Fixed Cam and camcorder
• Lockscreen volume music controls now works.
• Fixed GPS
• Arabic support fixed
Everyone should Update to this version ASAP, it has everything working on it AFAIK..
V1.6.1
released majorly focused to solve users bugs
• updated to UD 2.4
- theme stuff changed
- some tweaks
• switch to Takaaki's initrd
• no data.img included: the new initrd will create one, based on startup.txt options (by default i will create a 512mb data.img)
• only FM and File Manager included.
• New Cam working ! credit to lucian777
• kernel: hastarin 8.5.3 & EB
• fixes and tweaks that YOU will test and report since we don't have access to BT devices, etc etc
• everything should be working, at least it is working for us
V1.6
- Dropped Defrost base and switched to Ultimate Droid base by blackdroid
- Switched to new initrd by cedesmith.
- New custom commands that its new for hd2 android..
- Build performance improved alot.
- latest wrapper 0.7 by Latema with hastarin options included
- Added LedmeKnow app to change led notifications.
- And A lot more Im forgetting...
V1.5
- Changed the base to defrost due instability on the cm nightlies, will revert back on the next RC
- Added rmnet builds and stock builds.
- Added new theme(Hope you will like it)
- Fixed hot reboots issue and other mentioned ones.
- Updated to latest wrapper 0.3 by Latema.
- Will add more later..
V 1.4 (Check here for the full changelog)
- Updated base to the latest nightlies (2010-10-31 04:54:01)
- Update to Android 2.2.1
- Switched to hastarin 7.7
- Added new theme
- Improved the performance of the build
- Better battery life without Setcpu
- New Youtube app
- Stable ppp
- Fast wifi and ppp speeds
- New Dspmannger
- And a lot more I forgot to mention
V1.3
- Revert back to Gala S Theme.
- 240 dpi and 1gb data set by default.
- Latest Stable Nightly with CyanogenMod-6.0.1.
-Added tweaks to improve battery life and performance.
- FRF91 code used newer than FRG33.
-Latest Haret by NetRipper
- Some more stuff!!
V1.2
-Changed base to Cyanogenmod CM6.0.1
-Added new theme
-Improved the performance and battery life
-Added PPP fix thanks to bangstar
-Fixed compass, G-sensor and gps
-proximity sensor Is fixed
JDMS 1.7 Beta 2.1 - Based on Ultimate Droid 3.0 Beta
LATEST:
http://www.theultimatedroid.com/forum/index.php?/files/file/131-hd2-300-rc-release-candidate/
JDMS 1.7 Beta 2.1 RAM - Based on Ultimate Droid 3.0 Beta
Screenshots here : http://androidappreview.net/taking-gingerbread-for-a-test-drive-ultimate-droid-3-screenshot-tour/
do NOT use "USB Mass strg" option from magldr - if you don't have a card reader, use CWM function to mount your card.
recommended but not needed - format your sdcard with a sdcard formatter, here: http://panasonic.jp/support/global/cs/sd/download/index.html
1) If you're new to all of this read this: http://forum.xda-developers.com/showthread.php?t=893948
2) you need CWM (ClockWorkMod) 1.2 or higher - props to RaiderX303
Files and Tutorial here http://forum.xda-developers.com/showthread.php?t=898913
2.1)Now follow the tutorial for CWM and use this partition layout zip http://forum.xda-developers.com/attachment.php?attachmentid=490084&stc=1&d=1295076949
3) The rom is here: http://www.multiupload.com/Q3JCP775XQ
MD5: 3ae11ab21c77f9729ddb0d2a73b1d846
(the md5 is here for a reason, so do a md5sum on the file you downloaded - google "md5sum" if you don't know what this is)
- included in latest beta - The gps-fix is here: http://forum.xda-developers.com/showthread.php?p=10666991&highlight=gps+fix#post10666991 Credits to Gauner and Diem, and thanks Yom for the flashable zip
if you want your apps on the sdcard (app2sd) follow this tutorial: http://forum.xda-developers.com/showthread.php?t=905089
use the signed zip here: http://forum.xda-developers.com/showthread.php?t=715116
copy your zip files to your sdcard root (with apps2sd.zip, if you're using it)
4) to boot on magldr let the power button pressed for 10s,
choose "Boot AD SD", CWM will start
it's recommended to CWM wipe data and cache
now choose install zip from sdcard next choose a zip from sdcard
and choose the jdms1.7-beta2.1.zip file
repeat the operation with the gpsfix zip file
and repeat again if you use the app2sd
then reboot, magldr will automatically boot on nand
you're done ! the boot long approximatively 1mn
Click to expand...
Click to collapse
Build MiniChangelog:
Code:
beta 2.2
•gps fix included (credit to gauner and diem)
•loud voice fix (still robot voice on first call)
•multitouch fixed (gmaps 5)
•tweaked initrd
•crw_kernel - OC enabled to 1.3, default at 998 and UnderVolt added - see kernel changelog
•EB kernel (flashed apart)
beta 2.1
•changed initrd to ensure Android is using /cache partition
I recommend using at least a 30mb cache partition, although i tested
with 20mb and Angry Birds (my test app) is downloaded and installs
all this cache talk resumes in: less cache, more user data (for leo512 users).
I repeat, i recommend at least 30mb
•improved build performance, it's even smoother now (or should be)
•changed default music app to miui-music player from 1.6.2
•included my kernel - r1.2
PS: you might experience a longer boot time, this is normal.
beta 2
•fixed market not downloading some apps
•implemented ram the way it should be done
credit to darkstone for the method
beta 1.1
•fix data
•crawlingcity kernel r1 - No OC, No UV, SMARTASS, gsensor patch and more
beta 1.0
•gps fixed
•new gapps (including new market)
•FC on some apps fixed.
Kernel Only r1.3 with OC and UV optional - read changelog - use CWM to flash - http://www.multiupload.com/WBFXMYJ5VW
Kernel Only r1.2 - use CWM to flash - http://www.multiupload.com/8UHYTHSJDI
Kernel Only EB - use CWM to flash - http://www.multiupload.com/Y5GTTXGPIC
this EB is hastarin's r8.6 with RMNET, several filesystems (yaffs2 - to boot from nand)
zip layout not compatible with previous build versions - made for ram
Kernel MiniChangelog:
Code:
r1.3
•added OC - default is 998
•added UV - optional - use hastarin's UV script for this - get it [URL="http://www.multiupload.com/CDQSTRZ3CT"]here[/URL]
(if you don't know how to tweak this, don't touch the files. just use the kernel without any tweaks)
r1.2
•minor tweaks to yaffs2 performance
r1.1
•some cleanups
r1.0
•fixed SMARTASS
TODO:
Code:
Code:
- arabic support
- option to data2sd
Recommendations and advices:
•Space available for EU_LEO 180mb - more than enough to me
•Don't choose reboot, choose shutdown. (some users will have high battery drain using reboot, i don't have it. the choice is yours)
•Robot voice - known issue - first call, turn speaker on, turn off speaker, end call. no more robot voice. if you do have robot voice again, repeat the process.
After a while you really need to do a backup, use the CWM backup fonction (it works well), to access it turn off you're phone and press the power button for 10s and you will boot on MAGLDR choose the "Boot AD SD"
CAUTION: when restoring with CWM do NOT restore system or boot, just restore data and/or cache. If you restore system and boot you're are reverting to the previous version (rom and kernel). Go into advance restore - pick your restore point - choose data. If you want to restore extra user Apps i recommend using mybackup or titanium backup
If you have app2sd backup it as well.
Want PPP on nand? Checkout this post http://forum.xda-developers.com/showpost.php?p=10400082&postcount=3567
Thanks ducehlmg for the small tutorial i love to see our "small JDMS community" helping each other
Thanks LordFernando for the post layout
------------------------------------------------------------------------------------------------------------------------------------------------------
JDMS 1.6.2 - not receiving support at the moment, it's really really stable and works flawless for daily use.
CWM recovery update.zip
this isn't tested, it just boots. i won't support this for now. don't ask questions regarding this, it won't be answered by me
http://hotfile.com/dl/95321586/9580e...pdate.zip.html
NAND JDMS 1.6.2
This is RMNET, not PPP
nand version - http://hotfile.com/dl/93240086/73ff315/JDMS.7z.html
mirror - http://www.mediafire.com/?m0mzj40ejdhzqay thanks to massage000
in the readme it says hastarin 8.5.3, but the kernel is 8.6. no one reads the readme, but you never know
credit to ocm for boot.img
NAND FIX RMNET for 1.6.2 only
http://www.mediafire.com/?c6600xcc5g9gc7k
Instructions:
download this file, put it in /system/bin
open terminal, type su then type sh /system/bin/rmnet0-mtu.sh
reboot
Want PPP on nand? Checkout this post
Thanks ducehlmg for the small tutorial i love to see our "small JDMS community" helping each other
CWM recovery update.zip
this isn't tested, it just boots. i won't support this for now. don't ask questions regarding this, it won't be answered by me
http://hotfile.com/dl/95321586/9580e69/jdms-update.zip.html
Thanks for your effort.
Downloading now and will test it later
will try asap
Will test. And report. =)
will download now and test when i wake up in the morning, btw do you mind posting that wallpaper thats shown in the locksreen screenshot? thanks
Will give it a run
Does the Bluetooth Stereo working with this build?
itsedstech said:
will download now and test when i wake up in the morning, btw do you mind posting that wallpaper thats shown in the locksreen screenshot? thanks
Click to expand...
Click to collapse
Its already on the build....
shree.cse said:
Does the Bluetooth Stereo working with this build?
Click to expand...
Click to collapse
Like I said, Bluetooth needs testing since i don't have the devices..
downloading now...
Are these screen shots belong to this build?
I saw the build number as '' FRF 91'' But you said this is based on 'FRG 33'
Are these screen shots belong to this build?
I saw the build number as '' FRF 91'' But you said this is based on 'FRG 33'
Is it really based on FRG33?
Just asking because the last picture show FRF99.
It is always nice to see new builders Keep up.
Greetings, Santroph.
errors in unzip.
Its based off FRG33 but I used different build.prop provided in this forums to change dns settings...
errors in unzip...
epsongun said:
errors in unzip.
Click to expand...
Click to collapse
Try using the latest 7-Zip.
[ROM] Racpu_FROYO.iPhoneStyle.V1 - XXJPO (7/11/2010) | Credits DocRambone & webstar1
Hi!
This is my first custom rom "Racpu_FROYO.iPhoneStyle.V1"
ScreenShoots
[URL=http://img834.imageshack.us/i/sc20101107213016.png/]
[/URL]
Based on Doc Froyo XXJPA and MIUI9000 v1.1, thanks DocRambone & webstar1 for yours ROMS the merit is all yours.
This Rom is a simple iPhone Style, and launcher is modded, and Universal LagFix.
Basic Features:
- Based on XXJPO (Froyo 2.2)
- Deodexed
- Apps and framework optimized
- Modded Theme
- Rooted
- Busybox 1.17.3
- *Ad hoc Wi-Fi support, how to enable.
- Zip-aligned
- Clockworkmod Recovery
- BLN support (BacklightNotification, enable via CWM, part of the actual kernel)
*Enable Adhoc:
You need rootexplorer (or use adb)
Navigate to system/bin
There is one wpa_supplicant, one with name wpa_supplicant_ad_hoc
Change name of the wpa_supplicant to wpa_supplicant_old
Change name of the wpa_supplicant_ad_hoc to wpa_supplicant
Reboot
Included Apps:
- Latest SU and Busybox
- Modded TW Laucher
- Default Samsung Email app
- Fancy Widget
- Samsung MyFiles
- Task Manager
- Essential Apps like Camera, Radio, Video Player or Music
Medium Apps Upgrade Package:
- Allshare (DLNA)
- Gmail
- Flash Player
- Live Wallpapers
- Magic Smoke Wallpapers
- Google Maps
- Mobile tracker
- Protips
- Samsungapps
- Screen capture
- SNS accounts (Facebook sync)
- Unified inbox (Facebook, Twitter etc)
- Wipereceiver
- Voice dialer
- Voice recorder
- Voice search
- YouTube
Full Apps Upgrade Package (Requires Medium first!)
- Extra fonts
- Aldiko
- Buddiesnow
- Days
- Dualclock
- Layar: Download from market
- Minidiary
- Pressreader
- Samsung live wallpapers (But you can use live wallpapers)
- Thinkdroid
- Write and go
- *JPO Swype
*JPO Swype (v2.1.41.10155 - US/UK English, Deutsch, Français, Español, Italiano, Nederlands, Português Europeu, Polski, 한국어, Türkçe)
Advice
- I strongly advice you to disable any lagfixes when upgrade to new roms or install new kernels.
- Always flash rom with FULLY charged battery!
- Make backup of efs-folder (with Root Explorer or ADB)
- Do NOT restore system data, if you upgrade from 2.1 (Eclair)
- Do not factory reset phone if you have removed any apps from the base rom.
If you want to factory reset, flash the base rom before again if you made any changes
- If you do a factory reset after install: lancher pro, sgs tools. gallery etc will be deleted.
Download
This Rom it is installed in three parts, the first being the principal and other optional updates, I recommend installing the complete package.
MOD EDIT: ROM Removed for Plagiarism of Doc Froyo XXJPA, including cope-paste of release notes
Install Instructions - Post 2
Install Instructions
1. Download the three Zip Files and put it on your internal sdcard.
2. Download clockworkmod recovery from here. You need Clockworkmod, this won’t work with stock recovery.
3. Rename the clockworkmod recovery file to “update.zip” and put it on your internal sdcard.
4. If you had Voodoo installed prior to installing this ROM (eclair or froyo), make sure you still have the "disable lagfix" folder inside "/sdcard/Voodoo".
5. Shutdown phone, wait for it to power down, then boot the phone into recovery mode (press volume up, keep it pressed, then press home button, keep it pressed, then press power button, keep it pressed until you see the Galaxy S screen. Release all three buttons when you see it).
6. Select “apply sdcard:update.zip” (use volume rocker to move up and down, and home button to select). Clockworkmod recovery will boot now (you may have to do apply update.zip twice for Clockworkmod to show up).
7. Once in Clockworkmod, select “install zip from sdcard” (use volume rocker to move up and down and the back button to select).
8. Select “choose zip from sdcard” and then select the 1- Racpu_FROYO.iPhoneStyle.V1.zip. Choose yes then.
9. The update will start (will take some 5 minutes) and during the flashing you will see some strange big characters on the screen, don’t worry, that’s normal. After the process finishes, you will be dropped back into Clockworkmod recovery. From there, choose go back, and then reboot phone.
11. The first boot will take some time as the ROM will deodex.
12. After the phone boots up, shutdown phone again, and then boot into recovery, and install the 2- Racpu_Medium_Pack.zip, waiting to install and go back e reboot phone.
13. After starting, let's back to recovery and install the latest zip, 3- Racpu_Full_Pack.zip.
14. After the phone boots up, shutdown phone again, and then boot into recovery. The phone will boot DIRECTLY into Clockworkmod. From there, select a "advanced ULK features", then "Lagfix options". You can select any of the lagfix schemes. I recommend NO-RFS advanced EXT4.
15. You can also enable some startup tweaks from the "Tweak options" menu.
You more or less stole the whole thing, even copied the text.
Screenshots??
senseless without screens..
Screens needed no one will load it without seeing what it looks like.
Jabbypants said:
Screens needed no one will load it without seeing what it looks like.
Click to expand...
Click to collapse
+1
10char
lol advice section as is full and med apps bit copied and pasted straight from doc's thread
DocRambone said:
Please.....*suck*
Click to expand...
Click to collapse
Wow, almost entirely copied from you =))
I lol'd
dupel said:
Wow, almost entirely copied from you =))
I lol'd
Click to expand...
Click to collapse
lol give him time we might get it all copied over
This like the 8 or 9 "rom" that's based on the 7.6, new kernel, theme and its NEW custom rom.
Please try more before posting new rom. Start with a theme and learn a bit more.
Do we really need these full ROMs which are just themed versions of Doc's mod?
Why didnt you just make a theme for docs rom?...
For me; this is not an interesting ROM since the only difference seems to be that it makes my Android look like iOS, and that's the last thing I'd like.. But thats me.
Sent from my GT-I9000 using XDA App
Updated ScreenShoots...
All this is a mixture of various things from other people claiming this as your own work, like the modded launcher from my miui rom.
Terrible
Sent from my GT-I9000 using XDA App
I have not announced that it is my ... used based on your ROMs and DocRambone WebStart, but I thanked and the merit is all yours.
I apologize, but this is my first change in ROM.
Cumps
So where can we find the iphone theme only?
akafitz said:
So where can we find the iphone theme only?
Click to expand...
Click to collapse
Do it urself
One method :
1. Get theme-porter Link
2. Take the apk's from this rom and put it inside new folder
3. Take apk's from your current rom and put it in old folder
4. Run script.
5. Push the files from new folder back to your phone.
Done.
Note : The above guide applies to any hdpi rom/theme
Daneshm90 said:
Do it urself
One method :
1. Get theme-porter Link
2. Take the apk's from this rom and put it inside new folder
3. Take apk's from your current rom and put it in old folder
4. Run script.
5. Push the files from new folder back to your phone.
Done.
Note : The above guide applies to any hdpi rom/theme
Click to expand...
Click to collapse
Oh SWEET!! Thanks.
Racpu_ said:
I have not announced that it is my ... used based on your ROMs and DocRambone WebStart, but I thanked and the merit is all yours.
I apologize, but this is my first change in ROM.
Cumps
Click to expand...
Click to collapse
You can't just take something Doc and Webstart spent a lot of time doing, just put it together and name it a new ROM. In fact I see no changes what so ever compared to their work.
Hi!
I released a new ROM. The Idea behind it is a mix from HTC Hardwarelibs/Settings and APPs but without Sense. The Build is based on a new Desire HD Build (Android 2.2.1). I removed all HTC Widgeds, Sensestuff, etc. But I let some Apps, like Camera, Album, Musicplayer, Clock, EMail, Messanger, Keyboard, Twitter, etc. and you have the HTC System stuff, like the USB connection Menu. It's very nice and fast. As launcher is the Gingerbread Launcher installed.
Try it with e.g. Launcher Pro, Fancy Widget and Smooth Calender.
Working:
All
NotWorking:
- Customize in settings because it's sense connected. You can change background etc. with the long press on desktop.
FOR SMALL UPDATES LOOK IN POST 3
I added the app2sd+ mod. To enable it, you have to create a second partition on your sd card. But as first, BACKUP YOUR SD DATA !. The first one has to be the fat32 for normal sd use. Second ext2/3/4. 512 Mb for app data should be fine. I have 1.5 GB. If the partition exists, the system is using it for apps and other stuff. You have ca 200 MB Free on /data after this mod. Second good thing, if you install a update, you don't need to reinstall the apps, they are still there. If you don't create the second part, the data is like usually on nand. Automatic detection.
- You need MAGLDR 1.13
- NAND Build
- Prepared for CMR
- Kernel is almost stock from our git.
- Android 2.21
- You can create the partitions e.g. wirth gparted in linux (live cd boot for windows), or windows partition tools
- No OC or such stuff
- Interactive gouvernor
- completly cleaned initrd
- correct file rights
- rooted
- deodexed
- new busybox with many new system commands
- ENABLE: UseLast24NAND in magldr for sthis ROM!
It's made for daily use.
5mA standby
8mA with Bluetooth
For Overclocking use MDJs kernel, change the mtdblock0->mtdblock2 in batchfile!:
http://forum.xda-developers.com/showthread.php?t=831585
Simple download, extract, connect phone, run batch.
LOOK HERE FOR SD VERSION:
http://forum.xda-developers.com/showthread.php?p=11136523#post11136523
New Update Version 1.7 to 1.7.1: (you need 1.7 installed)
- Fixed GSensor Calibration
- Fixed win-key unlocks Lockscreen
- Fixed some market problems in CMR build.
Extract download zip in root of sd (update.zip have to be then there), boot in magldr/ad recovery, do a backup, apply update.zip.
!DON'T USE MDJs KERNEL TILL HE HAS A NEW UPDATED VERSION!
Download:
http://www.multiupload.com/YAVL709FOA
New Version 1.7: !MAGLDR 1.13 needed!
- Fixed browser problems
- Removed flash. Try this one for a stable browser: http://forum.xda-developers.com/attachment.php?attachmentid=507808&d=1296746097
- Added Recovery partition, Full-DFT-Setup installs automaticly CMR 1.3 (is a recovery system for much android devices, you can do backups there, restors, install upates easy and much more, you can start it with ad recovery from magldr 1.13 after you flashed 1.7)
- Enable UseLast24NAND in magldr bevor you flash it (Go to MagLDR->Services->UseLast24NAND ->yes)
Download: BUILD INCL. CMR
http://www.multiupload.com/AGBQQY7V9B
For TMOUS users:
- Do NOT enable UseLast24NAND in magldr and replace the flash.cfg with this one
http://www.multiupload.com/2RMVQBQ2TB
Version 1.6:
- Fixed cache (market) for all
- Fixed power problems after first call (the 70mA)
- Fixed proximity/lightsensor power on/off
- Using now the FULL availible nand. You have to follow this steps:
-- After Backup, go to magldr
-- MagLDR-> Services -> UseLast24NAND
-- Activate it with yes (green), it means now we use full nand. It means we are using the last 24MB of NAND, which are default disabled.
Some people says there is the bootloader or such stuff. THIS IS NOT TRUE! This part of memory will be everytime if you flash something new like new magldr deleted, it's all. So you can only put there stuff, which is temporary there. So it's the best place for a cache partition! (it's a partitions where android stores temporary data). It's only disabled by default in MagLDR, because the roms have to prepared for it, like this.
!IMPORTANT: DEACTIVATE IT IF YOU USE OTHER ROM!
-- restart phone to magldr again
-- flash rom as usualy
Download:
http://www.multiupload.com/93DE1TVTD1
IF you have a TMOUS 1GB device, don't enable 24M and use this config, replace the one in 1.6 build.
http://www.multiupload.com/NHS0FZKEL7
Version 1.5:
- Fixed Market
- Removed LancherPro as default and added Gingerbread Launcher, if you want it back then download it from market
- Removed HTCLockScreen and added a modified HTCClock which works with alarms ( I added the HTCLockScreen as update in post 3) thx to catachresistant
- The sound should be now a bit louder
- Readd gmail app
Download FULL 1.5:
http://www.multiupload.com/6XKNONSZSG
Download Update 1.4->1.5, Install like other Updates in post 3
http://www.multiupload.com/200K76O09A
If you're using this build WITHOUT app2sd (it means without second partition on sd for data), install this update to fix cache (market).
http://www.multiupload.com/66CSYO05AH
Version 1.4:
- Fixed Camcorder
- Fixed some small bugs
- See POST 3 for the Market Fix!
http://www.multiupload.com/WSCZRG99WQ
Version 1.3:
- Back to unsquashed system
- Improved USB Mass Storage speed
- Fixed Google Navigation
- Added HTC Lockscreen (Fixed Alarm Problems, you can remove HtcLockScreen.apk if you want the old one)
- Fixed other small bugs
- Readded Facebook integration
!! ADDED BACKUP/RESTORE SOLUTION FOR DATA! Look in Post 3 !!
Download:
http://www.multiupload.com/72XYF29WYU
Version 1.2:
- Reduzed size -80MB
- Fixed superuser app
Download:
http://www.multiupload.com/FY5F9PYK4W
Version 1.1:
- Fixed BT draining
- Fixed Ringtone choose
- Fixed Exchange
- Fixed Torch
- Readd some apps
- Fixed rooting
- Tuned some stuff.
Download:
http://www.multiupload.com/8EXDROAVI7
Version 1.0:
- Density 240 (default):
- All looks good.
Important:
Use it on your own risk!.
!BIG THX FOR THE DONATIONS!
Oh man, it's very cool!
Download it now and try. TY
Version 1.7
Use CMR backup/restore capability. Got to: magldr -> AD Recovery
OPTIONAL: HTCLock Screen:
http://www.multiupload.com/QKR224X925
Version 1.6
Backup and Restore Solution through adb for Versions 1.1- 1.5 -> to 1.6
Use it for Userdata Nand Backup and Restore.
If you do a backup, a file on sd card is created (backup_markinux.tgz), you can save it to PC or so if you want.
After flashing, run the restore, this will erase the /data and restore the backup, all should work like bevor.
!!DO IT ON YOUR OWN RISK! NO GUARANTEE!
- download
- go to flight mode
- Enable USB debbuging in settings->applications->developer (if disabled)
- connect phone on USB as charging only
- run batchfile
- wait some minutes after first boot with new rom till the system does nothing bevor you start restore, activate flightmode and usb as charging only
- the phone restarts automaticly after restore
http://www.multiupload.com/SQDYPKOC8Q
OPTIONAL: HTCLock Screen:
http://www.multiupload.com/QKR224X925
Version 1.5
OPTIONAL: HTCLock Screen:
http://www.multiupload.com/QKR224X925
Version 1.4
Quick Fix For Market!
http://www.multiupload.com/NXE5T78BN6
Version 1.2
Update1
Improved write speed to sd if exported as external storage:
http://www.multiupload.com/AIJNAL3WWS
- download
- Enable USB debbuging in settings->applications->developer (if disabled)
- connect phone on USB
- run batchfile in script
- the phone restarts automaticly
how is mms for tmobile users is this patched?
Nismo300zx said:
how is mms for tmobile users is this patched?
Click to expand...
Click to collapse
I don't know about this problem, so I did nothing for it, test if it works. If there is a fix for it then a can include it.
hey is htc messaging and mail included? those are the only part of Sense i use not the UI. i use launcher pro. and also is it deodexed?
Jayedamina said:
hey is htc messaging and mail included? those are the only part of Sense i use not the UI. i use launcher pro. and also is it deodexed?
Click to expand...
Click to collapse
3 x YES!
The main appeal of desire hd builds for me is the text-seletion facilities of the sense build, which makes typing so much better. And it's the main reason I'm using a gingerbread build right now. But HTC's text selection is still much better. I will give this build a try, but i'd rather have a ClockWorkMod build, which makes upgrading, backing up and restoring builds so much easier. Also, the abilty to overclock would be appreciated (not enabled by default).
Thanks for your effort.
App install in SD If I formated my SD in EXT4?
Does it have the HTC keyboard?
Markinus said:
3 x YES!
Click to expand...
Click to collapse
cool thanks Markinus will give a try. i think you should make a more complete list of whats included and removed.
wow!! great idea!!
could you post the files to get social networking back please??
Has anyone else had a problem installing this rom? I installed everything fine, but after I go through the setup process it always fc the setup program, and it loops, so the only thing I can do is turn it off.
It's funny I just got it in my head to try another dhd rom, loaded the mdj lite rom and it worked fine but it doesn't have boot.img and doesn't work with clockwork recovery. I was really hoping to give this one a run.
Brilliant idea ! Now we don't have battery drains and have absolutely the best contact manager/dialer, text selection and other things BUT
- I have many FC in CLOCK, SETUP WIZARD, (sometimes) MAIL and I didn't check everything yet
- HTC Flashlight doesn't work
P.S. Please don't rip everything ... leave us things that don't slow down so much our phone and don't eat every byte of data space (I like integration with Facebook, sense home screen isn't needed for me)
Thank you very much, sir ! It's your second idea in absolutely oposite direction but again genius !
FC on Setup
Same issue here. FC during initial setup. Had to install another ROM. Will try again if there is a fix. I love DHD roms and especially without all the sense stuff in it
do i HAVE to partition my SD card to use this build?
I'm not worried about apps2sd and all that stuff....just want a small, quick smooth, bloat-free version of desire hd.
???
cheers
Matt
munish666 said:
Same issue here. FC during initial setup. Had to install another ROM. Will try again if there is a fix. I love DHD roms and especially without all the sense stuff in it
Click to expand...
Click to collapse
Try to flash it again and do not use this setup. Push every skip button you see ;P
yea fc from initial start up all over the place, i love the idea of this rom but for now i will go back to my regular.
Markinus said:
Hi!
I released a new ROM. The Idea behind it is a mix from HTC Hardwarelibs/Settings and APPs but without Sense. The Build is based on a new Desire HD Build (Android 2.2.1). I removed all HTC Widgeds, Sensestuff, etc. But I let some Apps, like Camera, Album, Musicplayer, Clock, EMail, Messanger, and you have the HTC System stuff, like the USB connection Menu. It's very nice and fast. As launcher is Launcher2 installed.
Try it with e.g. Launcher Pro and Fancy Widget too.
Working:
All
NotWorking:
If you find something then write it.
I added the app2sd+ mod. To enable it, you have to create a second partition on your sd card. But as first, BACKUP YOUR SD DATA !. The first one has to be the fat32 for normal sd use. Second ext2/3/4. 512 Mb for app data should be fine. I have 1.5 GB. If the partition exists, the system is using it for apps and other stuff. You have ca 245 MB Free on /data after this mod. Second good thing, if you install a update, you don't need to reinstall the apps, they are still there. If you don't create the second part, the data is like usually on nand. Automatic detection.
- You need MAGLDR 1.11
- NAND Build
- Kernel is almost stock from our git.
- Android 2.21
- You can create the partitions e.g. wirth gparted in linux (live cd boot for windows), or windows partition tools
- No OC or such stuff
- Interactive gouvernor
- completly cleaned initrd
- correct file rights
- rooted
- deodexed
- new busybox with many new system commands
Important:
- There are no Socialnetworks apps or DataTransfer tools, so skip this steps in HTC Setup.
Version 1.0:
- Density 240 (default):
- All looks good.
http://www.multiupload.com/97K8MZOZK8
- Density 180:
- All nice small but some apps has problems with this density.
http://www.multiupload.com/E8KGSQG2A2
Important2:
Use it on your own risk!.
Click to expand...
Click to collapse
Is it possible to have a CWM version? Thanks!
Seleron said:
Try to flash it again and do not use this setup. Push every skip button you see ;P
Click to expand...
Click to collapse
That did it ! Thanks man. Will check out the rest of the stuff in the build.
**With the system partition set up the way it is, flashing any ROM via CWM is ALLOWED.***Changes added to post! Please re-read!!*
Post #1: ROM details/Installation instructions
Post #2: Download link (.torrent file added)
Post #3: Changelog
Post #4: Reserved
Meant for the T-Mobile HTC HD2 ONLY!
This ROM is based off of dungphp's Desire HD 1.84.832.2 v1.2 (all credit for original ROM goes to him!). It is tweaked for better performance/usability and comes with a few changes/fixes as per his latest release:
- integrated CWM Backup functionality (using my method)
- modified flash.cfg for a more efficient use of the system partition, and also for full CWM support
- modified initrd.gz to remove App2SD functionality (not needed )
- updated WeatherUpdater.apk for working weather updates (credit to CMYLXGO)
- removed a few .apk's:
Code:
- Google Maps
- Locations (Laputa .apk's)
- Friend Stream
- Stocks
- Facebook
- Twitter
- All corresponding widgets
Features:
- Fast (doesn't require OC )
- Made for simplicity; a few Sense features have been removed (Skins, live wallpapers, etc)
- Zipaligned + Deodex'd (comes standard, nowadays)
- Root permissions/SuperUser (also standard)
- Data/3G (RMNET)
- Wi-Fi (No 60mA drain)
- GPS
- Phone (if you get robot voice, disable Audible Touch Tones in Sounds)
- Camera (5MP) (credit to pyrorob)
- Camcorder (800x480) (credit to pyrorob)
- USB Mass Storage
What's working:
- Everything as far as I'm concerned.
Issues:
- When screen is off and USB is plugged in, the phone doesn't recognize the connection until the screen is turned on. Just a slight inconvenience, but I'm gonna look into it anyway because it shouldn't be happening.
- 3G crashes temporarily after Market first-run.. second-run is fine
Recommended Installation Instructions***NOTE THAT INSTALLING THIS ROM WILL CREATE A FIXED-SIZE SYSTEM PARTITION OF 350M***
Code:
**MAGLDRv1.13 REQUIRED! RADIO 2.15.50.14 RECOMMENDED!**
- Reset phone and bring it to the MAGLDR boot menu
- Select option 5 (USB Flasher), but DO NOT execute the command! Leave it there..
- Run DAF.exe
- Click Next, then Next
- Wait 10 seconds after DAF.exe searches for USB, then execute "USB Flasher" on your phone
- ROM will install, phone will reboot.
- DONE!! :)
Mandatory First-Boot Modifications
Code:
- Upon first boot, let screen shut off and leave it for roughly 5 minutes before unlocking screen and running phone setup
- Once at the Home screen, open Phone, type *#*#4636#*#*, then Call
- Tap Phone Information
- Change "preferred network type" to "GSM auto (PRL)"
- Radio signal will cut off; once it does, tap "turn off radio"
- Click Back until at Home screen
- POWER OFF (NOT RESTART) the phone, and let it power on via USB
**After the 2nd boot, enable WiFi and login to the Market; should have no problems **
To-Do List
Code:
- apply the T-Mobile MMS patch (1024KB)
- Add (useful) T-Mobile apps (1024LEO)
- fix could-be errors for next release
- work on 512LEO version
- fix Market-3G error upon finishing Google sign-in
Downloads
- v1.0: (removed)
- v1.1: Megaupload
- v1.2: Megaupload
Changelog
Code:
v1.2
FLASH.CFG
- [B]system partition[/B]
+ changed fixed-size from 400M to 350M (more /data space now :D)
BOOT
- [B]modified initrd.gz[/B]
- removed more unnecessary commands
SYSTEM
- [B]removed Google tethering app (caused FC)[/B]
+ replaced WifiRouter.apk
v1.1
FLASH.CFG
- [B]boot partition[/B]
+ changed filesize+8M to filesize+4M
- [B]system partition[/B]
+ changed fixed-size from 420M to 400M
BOOT
- [B]modified initrd.gz[/B]
- removed "mkdir /bootsdcard" + mount commands
SYSTEM
- [B]modified build.prop[/B]
+ added persist.sys.timezone=GMT-5:00
+ changed wifi.supplicant.scan.interval=15 to 0 (for 'always-on' WiFi)
- [B]modified apns-conf.xml[/B]
+ added type="default,supl,mms"
+ changed proxy="216.155.165.050" to ""
+ changed mmsproxy="216.155.165.050" to mmsproxy="216.155.165.50"
- [B]removed following apps[/B]:
- Friend Stream
- All wallpaper .apk's EXCEPT HTCImageWallpaper.apk
- Live Wallpapers + Picker.apk
- Adobe Reader
- HTC Ringtone Trimmer (plenty of free alternatives)
- Unused foreign keyboard .apk's
- Search Anywhere + widget
- Unused skins (Wood, Slate, Metal) + Picker.apk
- WiFiRouter.apk (added Google alternative)
- [B]added 2 custom wallpapers to[/B] /system/media/wallpaper
v1.0
- Initial release
reserved for me
first? Looks like a solid rom, giving it a try
Just a heads up, just because you paid for those apps don't mean jack squat. It's still considered warez if you distribute it to the masses. I personally wouldn't put it in if I were you. I know I wouldn't want my build taken down over some stupid app;p
Going to try this
Sent from my HTC HD2 using XDA App
great job i am sure
i have a htc hd2 eu version with ext2 partition on sd card which is 1gb,
should i be getting error on installation of your rom?
if yes, is there any other way so i can try your rom on my device?
thanks in advance for any help
TheGeorgiaSwagger said:
first? Looks like a solid rom, giving it a try
Click to expand...
Click to collapse
"first?"
GROW UP!
matthew33 said:
"first?"
GROW UP!
Click to expand...
Click to collapse
Why would you ever want to grow up! Being a kid at heart is the way to be...
Eleventh.............. ?
720P also can work?? just a joke
memory 400
internal memory is only 400 is there a way i can get more i mean like 1g ?
"RADIO 2.15.54.04 RECOMMENDED!" Does a Radio with this name tag even exist??
P.S: Nice job btw
darioush said:
i have a htc hd2 eu version with ext2 partition on sd card which is 1gb,
should i be getting error on installation of your rom?
if yes, is there any other way so i can try your rom on my device?
thanks in advance for any help
Click to expand...
Click to collapse
As of right now, this build is only supported by the 1024LEO. I'm gonna work on a 512LEO version (smaller system.img, ext partition support) but seeing as how I don't own a 512LEO, I'm giving it some time before I put in that extra work ya know?
Sorry for the current inconvenience.
dastylee said:
internal memory is only 400 is there a way i can get more i mean like 1g ?
Click to expand...
Click to collapse
Read the OP, particularly the section "why the 'system' line changes to the flash.cfg?"
FernandM said:
"RADIO 2.15.54.04 RECOMMENDED!" Does a Radio with this name tag even exist??
P.S: Nice job btw
Click to expand...
Click to collapse
LOL! Radio 2.15.50.14 is what I mean, thanks for that.
And also thank you for trying my build!
mattfmartin said:
Just a heads up, just because you paid for those apps don't mean jack squat. It's still considered warez if you distribute it to the masses. I personally wouldn't put it in if I were you. I know I wouldn't want my build taken down over some stupid app;p
Click to expand...
Click to collapse
I thought paying for the apps would make a difference, but seeing as I would be providing those apps for free makes what you said matter.
Thank you for the heads up; I have removed that from my to-do list.
bumpidy bump bump
>>>>> This service is temporarily not available from your service area.
so sad............any new download link pls
Before starting trying to close this thread, remember that I have permission from Chef_Tony (Blackstone mod), fagyi (the ROM creator) and it's tested by me and more!
THIS ROM COMES FROM TIAD8 WEBSITE, AND THE MEMBER FAGYI DID IT!1. post = IceBread Info
2. post = IceBread Change log
3. post = IceBread Downloads
4. post = IceBread Tricks
Hello Guys
First of all I would like to thank all xda member & devs,modaco devs,Cyanogen Mod team, neopeek, tiad8, arrrghhh, midnight,tillaz,Paul O'Brian, tilal6991 and everyone who is working on the latest Gingerbread Android build from this website.
ICEBREAD V0.7
IceBread is a custom Rom for Blackstone!
Based on XDAndroid, thanks again for this!
So this IceBread v0.7, android 2.3.7 Build and with EXT2 partitions. You will need to do partitions on your SD Card!
Ok, I'm working on it with this build lot of time merging lot of stuff, I learned a lot of tricks from another device and now it's here for you guys! And I think I found the Best build for blackstone!
I manage this build up to date with latest stuff all time.
MAIN FEATURES & BENEFITS OF USING ICEBREAD BUILD
- ICS Themed
- Better memory optimization
- Better dalvik cache
- Better Overall speed
- Very Smooth
- Overclockable
- Very good battery
- Good Configuration
- Bug Fixing
- Many more.
Important!
Doesn't work :
USB - you need dualmountsd or maybe other app for this. Dualmount is better than stock so for me this is important.
Youtube HQ
Front Camera
FM Radio
If you dont use maps please delete before installing from system/app and delete maps.apk & maps.odex. You have more speed w/o Maps.
I need few good report from this build.
Installing
Here is how you should use your SD (You can use Minitool partition wizard or EASEUS Partition master):
Remember you must do the partitions on this order!
A FAT32 partition with any name you like and with the rest of the space avaiable on the SD
A EXT2 partition named system with 250 MB
A EXT2 partition named data with 800 MB
Lastly, another EXT2 partition named cache with 100 MB
With versions before 0.6:
1- Put npkboot your sdcard root
2- put update-IceBread-v0.x-zip to your sdcard root
3- Run haret, press volume down when it asks you to do it ( once, not pushing! ) ( enter recovery ) /press vol:up,down,up /
4- Format : system,cache,data partition in mount & storage / Not formatting to SDcard /
5- Install this build ( you will see a message saying formatting to EXT3, no worries )
6- reboot and run haret again and wait(not pressing anything).
With version 0.6 or more:
0- Same steps as before (1,2,3,4,5 and 6)
7- reboot to recovery
8- flash latest gapps from cyanogenmod site, we need cm7 gapps ( google -> search -> latest gapps )
9- after updating, reboot and run haret again
10- setup everything, reboot
11- Have a nice day with IceBread!
_______________________________________________________________________________________
After 1. boot you don't touch the screen ~ 5min! after sign in gmail, press menu preferences, restore launcherpro backup yes -> reboot yes -> reboot ( I added for you my launcherpro settings )
After 2. boot open all apps -> reboot
After 3. boot you have max performance!
If you like this build, please hit thanks button.
Thank you very much!
Hope you like it
Change log
IceBread V0.7 ( 2012.07.20 )
Change Log
- Scrolling cache disabled in framework.jar for smoother scrolling! look in widget page example really fast now! Hot New stuff for our device which working
- Optimized init.d folder
- Bin / Xbin folder changes
- Build.prop it has better configuration
- Fixed fast battery drain.
- Added my launcherpro backup to this version.
- HW keypad modded now its ok with all option. blac and blac100 or original
- more what i dont remember at the moment.
IceBread V0.6 ( 2012.06.30 )
Change Log
Full Pack
- Highly ICS look
- Settings.apk modded, like few stuff from ICS
- SystemUI.apk modded, like few stuff from ICS
- Mms.apk modded for Black themes ( like OMFGB )
- USB updated now its fully working via dualmount. May be native too ??
- Audio updated in system
- Hosts file are updated
- Minor speed tweak
Note:
this pack has my latest recovery/npkboot with one newest kernel (today)which may be fixed the incoming call reboot issue on topaz.
IceBread V0.5
Change Log
- It has all feature from V0.4
- Beats Audio support
- XLoud Engine support
- All System are updated
- Merged & using now New htc-acoustic code rebuild the audio structure : thanks to detule ; acl ; mwierauch
- BT audio test, hope its finally done.
- Zipalign support merged to this release, | system/app/* & data/app/* |
- Battery improvisation for better read and better life.
- Sony Bravia Engine reported/readded | Need test |
- DSPManager ported/added.
- Added Flash player support ( armv6 version ), hope its finally works. / on skate nice /
IceBread V0.4
Change Log
Light edition.
- Root fully working now latest su binary, of course with Superuser app
- Busybox installed and works
- Google Play added latest!
- Added Terminal emulator for Development app
- Added Appwidgetpicker ( example you have installed taskiller than you look in widget page 3 taskiller option, whit this app you look only 1 option and after you push taskiller you look just the 3 option )
- Updated livewallpaper
- Ch-tw lang move back this build.
- Gallery3D removed
- QuickPic added
- Youtube removed, install latest from market
- Minor audio optimizing
- BT update
- Gps settings edited
- Improved performance - Optimizing this build to 528 mhz without oc and turbo! but you can use if you want
- Init.d support fully working!!! ( i look that all before version has a bug now its full ok. ) Advanced users modify system/etc/init.d/*!
- Lots of battery work
- 3D updated driver from hero and all library for this from latest CM7 from my skate.
- Minor app and game crash work but its not fully working :/
-
Recovery:
- Updated latest su configurations for root and superuser app!
- Dalvik move back data partitions, more stability for app and game.
- minor smooth optimizing
- init.d support fix
IceBread V0.3
Change Log
- Few settings change in build source: Original setting now: enabled nonmarket apps, autobrightness mod.
- Repaired Energy widget bugs from V0.2
- Settings apk its reripped very smooth now.
- Development app its fixed.
- Mediaprovider updated.
- Few app move to /data/app partition. its all apk like deodex version but you can add odexed version too.
- Added Beats Audio support for me its omg with headset if you want i added to build my coca-cola ringtones it has very good bass with this mode and clear.
- Few system app are reripped for better speed.
- Audiopara.csv change to blackstone-test2
- Few another performance tweak.
- Apps and games now its likely IceBread V0.3.
- Native app2sd works, dont need move back to phone any apk.
- Another maps progress so i removed from build, now you can download the latest from market and you have landscape support too
- Removed Superuser app, it has bug but root fully working. without any problem
IceBread V0.2
Change Log
- Audio fully fixed, headset etc..
- Updated G-sensor little faster now.
- Themes fixes Volume & download bar music bar and few minor
- 3D library updated and 3D client are updated!!!
- Music - mp3 fixed
- Added All Battery mod from CM7
- Added FuguMOD
- Native app2sd fixed - dont need move back apps or games to phone you can install from sdcard no problem.
- Removed lots of language.
- Market changed to old version, need speed
- Maps changed better speed, landscape support
- Minor fixing
- Another root work
- BT update
IceBread V0.1
Change Log
- First release
- Odex-ed build, ALL system app optimized!
- Faster dalvik cache funkcion!
- Dalvik cache move cache partition
- Faster boot time
- Added new ril
- 3D work
- Improved app opening speed
- Tweaked phone,contacts, mms, and lot of app for better opening speed!
- Improved speed
- Tweaked build.prop
- Tweaked all system app
- Tweaked Framework-res
- Added system/etc/init.d support
- Camera tweaked
- Youtube tweaked
- Added ICS theme lot if app, latinIme too very nice
- Added ICS bootanimation
- Added ICS audio files
- Added ICS Fonts
- many more
Recovery:
This is Neopeek 1.9 and TiaCWM and XDA mixed recovery so latest with my trick and init edited.
- Optimized init.
- Added auto mount support that you dont have any bug with all ext partition format!
- Smooth increase
- Added better look few info at boot.
- HTC themed neopeek edition cwm.
- Dalvik cache move cache partition!!!
- Added to All startup with the new midnight offset!
- many more
Downloads
Downloads
Here is my link, where you find it soon all my work + stuff ( Flashplayer etc ) in one place, nand / sd too
Other device users, if you have any problem with call audio or simple native audio you only need replace this 3 files: libaudio.so,libaudiopolicy.so and libhtc-acoustic.so from IceBread V0.1 to currently V0.X build and after you should be fixed on your device!
2012.03.26 little update:
IceBread-Zipalign-support.zip
just rename to update.zip and flash via recovery.
after with all boot you have zipaligned all apk in system/app & data/app folder !
2012.03.13 IceBread v0.4
Repaired Gapps
( 1740 downloads uhhh thanks guys , donations 3 )
Build: update-IceBread-V0.4-repaired.zip
Npkboot: -- npkboot-from-fagyi-2012.03.12.zip
________________________________________
2012.03.05 IceBread v0.3
( 402 downloads, donations 2 )
Build : IceBread V0.3-ODEXED
Npkboot: use from V0.2 link.
Old Market: Old Market
________________________________________
2012.03.01 IceBread v0.2
( 684 downloads, donations 0 )
Build: IceBread-V0.2
npkboot: Npkboot-modified-fagyi
________________________________________
2012.02.19 IceBread v0.1
( 542 downloads, donations 0 )
Full Pack : IceBread-V0.1.zip
Tricks
Few info for progress from Future! V0.2 , V0.3 etc
- Fixing vold configuration ( native usb )
- Adding Full RTL support farsi arabic etc.
- Network searching error fixing from cm nightly
- maybe better 3D
- Loading bar ICS theme
- Bluetooth (can be paired but cannot be heard)
- 10 Scrollable Power Widgets in notification bar ( port )! (bugs in V0.2 not ready yet )
---------------------------------------------------------------------------------------------------
- remove nonuse lang ( done in V0.2 : now its only has the build: cz,de,en,es,fr,hu,it,nl,pl,tr,ru )
- Volume control ICS theme ( fixed in V0.2 )
- Add FuguMOD for better speed & responsive ( added in V0.2 )
- Speaker Phone ( fixed in V0.2 )
- Music (cannot find mp3 on the card) ( fixed in V0.2 )
- Headphone (headphone inserted still sound on the speaker) ( fixed in V0.2)
_______________________________________________________________________________________
Bugs in V0.1
- Network searching funkcion = sim error
- Bluetooth (can be paired but cannot be heard)
- Speaker Phone - fixed in V0.2
- Music (cannot find mp3 on the card) - fixed in V0.2
- Headphone (headphone inserted still sound on the speaker) - fixed in V0.2
Bugs in V0.2
- Network searching funkcion = sim error
- Root permission ( fixing fully 1 -2 days )
waiting for you!
reserved
Excelente Rom
Great work
Theres is a new NAND rom ???
is better if is NAND rom to replace win mobile
make a new NAND rom please
thanks
masrterk said:
Excelente Rom
Great work
Theres is a new NAND rom ???
is better if is NAND rom to replace win mobile
make a new NAND rom please
thanks
Click to expand...
Click to collapse
I will post the nand rom later.
please hit the thanks button
Hi,
great job. Today I use a Desire S, but it will be cool to use my old Touch HD with Android.
I managed to install the NAND-Version 0.2.
The only bug I found so far is, the device doesn't shut down. The only way to reboot or shut down is the reset-button or remove the battery.
I want to change to 0.7, but how can I update from 0.2 NAND? I formated the SD-card as you said, but I cannot run "haret.exe" from Android (using TotalCommander for Android).
I tried to update via CWM, but then the device stuck during boot.
Any way to update from 0.2 NAND to this 0.7? Or maybe an NAND-Version of 0.7?
Hello!
V0.7 its that sd built which is needed Windows mobile 6.1 + my modded V6 SD kernel, if you want sound without shutter every 10 sec, + best speed on blackstone / posting soon on xda too /
Dualboot from android doesnt work/released/developed for this device.
Flash one wm6.1 and after ran the haret if sdcard ready!
Tapatalk 2-vel küldve az én Skate-ről
fagyi said:
Hello!
V0.7 its that sd built which is needed Windows mobile 6.1 + my modded V6 SD kernel, if you want sound without shutter every 10 sec, + best speed on blackstone / posting soon on xda too /
Dualboot from android doesnt work/released/developed for this device.
Flash one wm6.1 and after ran the haret if sdcard ready!
Tapatalk 2-vel küldve az én Skate-ről
Click to expand...
Click to collapse
Maybe a dumb question, but how can I flash back zu wm after I installed Android?
The BlackstoneAdvancedRUU.exe doesn't connect to the device, even in TriColor-Mode.....
Can I use fastboot to flash the nbh?
Solution:
rename the nbh-file to BLACIMG.NBH and put in on the sd-card and then boot into TriColor to flash it.
Darkwing^V^ said:
Maybe a dumb question, but how can I flash back zu wm after I installed Android?
The BlackstoneAdvancedRUU.exe doesn't connect to the device, even in TriColor-Mode.....
Can I use fastboot to flash the nbh?
Solution:
rename the nbh-file to BLACIMG.NBH and put in on the sd-card and then boot into TriColor to flash it.
Click to expand...
Click to collapse
exactly
I downloaded the 0.7 build and followed the instructions up to getting into Recovery. Once in, I can move up/down but I cannot select any of the items. I found that I have to use the call buttons for that but they are not working. Ideas?
[Edit] Somehow, after pushing and pressing the power button several times, it went from switching the recovery screen on/off to working as a button. Continuing with the installation...
you must vol up, down, up after entering recovery to enable power button
mfsr98 said:
you must vol up, down, up after entering recovery to enable power button
Click to expand...
Click to collapse
Maybe you should add the "up-down-up"-part to the instructions.....
its there dude!
So, after playing around some while I can say: This ROM works realy good. It's fast an stable and I didn't find big flaws!
I didn't test the front-cam, but the back-cam works with pic and video.
Sometimes the wifi stops, but it starts again after a few seconds. Maybe I should update the radio?
I also managed to install a low-res version of Teeter, so the G-sensor is working well, too.
It would be great, if I can replace the wm completely and install 0.7 via NAND, but the SD-version is ok for now.
Thanks to all, who build this fine pice of work!
Darkwing^V^ said:
So, after playing around some while I can say: This ROM works realy good. It's fast an stable and I didn't find big flaws!
I didn't test the front-cam, but the back-cam works with pic and video.
Sometimes the wifi stops, but it starts again after a few seconds. Maybe I should update the radio?
I also managed to install a low-res version of Teeter, so the G-sensor is working well, too.
It would be great, if I can replace the wm completely and install 0.7 via NAND, but the SD-version is ok for now.
Thanks to all, who build this fine pice of work!
Click to expand...
Click to collapse
front camera doesnt work...
Radio as nothing to do with android on this device, sometimes it happens :/
Good news games are working!
mfsr98 said:
front camera doesnt work...
Radio as nothing to do with android on this device, sometimes it happens :/
Good news games are working!
Click to expand...
Click to collapse
There are more bugs....
If I put files on the SD-card via USB, I cannot find them via TotalCommander or OI Filemanager. TotalCommander cannot remount the SD-Card (card is busy). And if I remove the card and plug it in again, the device will freeze as soon as I open another app.
The files are there when I restart the device.
Just install dualmount app and after its fine. Its better for sdbuild than native. If put out the sdcard than where running that Android?
Tapatalk 2-vel küldve az én Skate-ről
hahaha, I LOL'D