Related
Hey Guys,
This is a port from an Xperia X8 MIUI Port, which is EXTREMELY buggy, if you are not very experienced in flashing then i urge you not to flash this ROM. I am not responsible if you brick your phone when flashing this ROM, so don't complain to me if you do
Okay the current release's are very very very buggy , we have only just managed to get adb working in the last hour. If you are interested in helping to develop this rom then feel free to download it. If you are looking for a fully functioning rom then they're are plenty others throughout the forum not here
Link to Current ROM ( really not ready for anything atm, unless you want to help dev, don't bother flashing )
http://www.mediafire.com/?reco2eej12a1w Use current version stated in OP. (Build0007 up tonight.. hopefully)
Installation.
1. Wipe of all (even if coming from previous installation)
2. Select Hero-MIUI_Alpha..
3. Flash
4. Wait, may take a while due to re-build of dalvik.
Thanks to:
Erasmux
Ybinnenweg
Pulser
Dsixda
The guys on the VR IRC
Feel free to pm me to offer your support, please do not ask for an ETA however.
Alpha0007 will NOT be released, major problems with egl. Changelog is for dev's mainly.
Initial Build
Changelog
Alpha0007 (5+6 not released.)
removed themed adw launcher and put original back
switched to cm6 launcher
added AudioFilter to system/etc
added AudioPara4 to system/etc
added AudioPreProcess to system/etc
switched apns-conf for cm6 one (system/etc)
switched 01_qcomm_omx.cfg for hero one(system/etc)
removed HTC_imel01 from system/app
removed suquashi inputmethod from system/app
removed semcsfmfm from system/framework
added su from cm6 to system/xbin
added wlan_cu from cm6 to system/xbin
added egl libs from hero to system/lib/egl
removed original egl files from system/lib/egl
added original hero nanorc files to system/etc/nano
added 04module from cm6 to system/etc/init.d
added 30cpumem from cm6 to system/etc/init.d
added 99complete from cm6 to system/etc/init.d
removed yamato_pm4.fw from system/etc/firmware
removed yamato_pfp.fw from system/etc/firmware
removed TIInit_7.2.31.bts from system/etc/firmware
added tiinit_5.3.53 to system/etc/firmware
removed fmc_init_1273.1.bts from system/etc/firmware
removed fm_rx_init1273.1.bts from system/etc/firmware
removed fm_tx_init1273.1.bts from system/etc/firmware
added avpr.bts from cm6 to system/etc/firmware
added brf6300.bin from cm6 to system/etc/firmware
added brf6350.bin from cm6 to system/etc/firmware
added vac_config from cm6 to system/etc/firmware
kept original fm_tx_init_1273.2.bts
Alpha0004
changed launcher2 to a themed adw launcher from a g1 rom
changed framework-res and mot-framework-res to resized versions from mdpi pack
used ele's update script
switched system/bin/.. files for cm6 ones (except those which have miui app dependencies)
updated ramdisk with hero lib's
removed com.sonyericsson.smfmf from system/etc/permissions
removed com.sonyericsson.suquashi from system/etc/permissions
removed com.ti.fm.fmrecieverif from system/etc/permissions
added Fw12551r1c.binto system/etc/wifi
deleted bootanimation.zip from system/media
switched all .kl files for keychars for hero-cm6 ones
switched all .kl files for keylayout for hero-cm6 ones
removed com.sonyericsson.suquashi from system/framework
removed radio.apk from system/app
Alpha0003
framework-res fixed (hopefully)
system/libs updated
busybox problems solved (hopefully)
Build.prop fixed
Alpha0002
Removed App2SD (Not removed yet, kept it for now..)
Switched to a different framework-res ( causes apps to f/c, i know )
Small changes
I just want to say good on you for giving this a go. It's nice to see some new people having a go at developing. So good luck!
I have adb working.. will post a logcat within 10 minutes
EDIT:
Here is the logcat of the boot.
http://pastebin.com/MZFgwhUX
Rom is booting!
Use alpha 003 then follow this steps:
in the folder "data" make a folder called "local"
now copy "bootanimation.zip" from "/system/media/" to "/data/local"
it should boot now it doesn't work, only shows the setup guide, after that it fc's on the launcher.
logcat:
http://pastebin.com/t8My7y1K
i love you <3
if there's any way any of us users can help you, please do not hesitate to ask for anything!
bro im newbie, after i move the "bootanimation.zip" to following step above but when i flash the rom it was failed ..? thanks for helping
fksuperstar said:
bro im newbie, after i move the "bootanimation.zip" to following step above but when i flash the rom it was failed ..? thanks for helping
Click to expand...
Click to collapse
what recovery are you using?, if you don't resign the file, it wont work with amon_Ra. We will we be working on a new build today (although it may not be released today) which you wont need to go through these steps to use. Can i also suggest if you're new to this that you flash another rom, as this one is completely unusable and is only meant to show the communitt the stage we are at.
Sent from my HTC Hero using XDA App
JieeHD - The apk's image-files might be mdpi, but they are all located in hdpi-folders, it could be a reason for fc'ing always.. if you install launcherpro through adb you can use that as launcher until other stuff is fixed.. Phone.apk never launches as it is now
EDIT: FC's seems more serious than that...
The problem with the current framework-res and mot-framework-res is that they are not miui , they are from a different rom. Using the original framework the rom will just not boot, which is why the apps f/c, as they are dependent on the miui framework.
JieeHD said:
The problem with the current framework-res and mot-framework-res is that they are not miui , they are from a different rom. Using the original framework the rom will just not boot, which is why the apps f/c, as they are dependent on the miui framework.
Click to expand...
Click to collapse
So what you have used are CM-framework-files?
And which version of Android is it?
mljjlm said:
So what you have used are CM-framework-files?
And which version of Android is it?
Click to expand...
Click to collapse
In the next build (which is being compiled atm) , the framework's are miui ones, check changelog
Android OS: 2.2.1
Hmm.. Are you sure that you have enabled /data/app-functionality in the latest (0004)?
I couldn't boot, and the logcat said that /data/local/bootanimation.zip wasn't found, when I looked through the updater-script I didn't find the command for extracting the data-folder to the data-partition?
i think you may be right because i switched scripts from a cm6 rom which stores the boot anim in system/media
Also, I'm wondering why the bootanimation.zip can't be in that location.. In the same logcat as before it logged that it was searching both in the /data/local- and in the /system/media-folders..
mljjlm said:
Also, I'm wondering why the bootanimation.zip can't be in that location.. In the same logcat as before it logged that it was searching both in the /data/local- and in the /system/media-folders..
Click to expand...
Click to collapse
i just removed it for organisation
JieeHD said:
i just removed it for organisation
Click to expand...
Click to collapse
Well.. I just mean in the previous version? Was it because of the other framework-files?
And should there be a ramdisk.tar-file in the /system/bin-directory?
mljjlm said:
Well.. I just mean in the previous version? Was it because of the other framework-files?
And should there be a ramdisk.tar-file in the /system/bin-directory?
Click to expand...
Click to collapse
I think the original update-script looked in data/local and then when we switched scripts it looked in both places, for some reason lol
The ramdisk-tar was in the original rom, so i updated it with our .rc files and left it, it shouldn't cause any problems..
Can you give us a quick guide as to whats working and whats not? Thanks
Imperticus said:
Can you give us a quick guide as to whats working and whats not? Thanks
Click to expand...
Click to collapse
I couldn't get the 0004 to boot, but in 0003, you could run through the setup, and then start over
**** managed to post this in dev - please move?
In good spirit of fugu I ripped some bin's 'n' lib's from JQ3 (GB 2.3.5) and made them flashable via cwm for Overcome 4.0.0 (and possibly for lower versions to). Ive tested this for about a week without issues..
Files updated in bin folder
app_process
system_server
Files updated in libs folder
libopencore_player.so
libquickview.so
libstagefright.so
libsthmb.so
libtflua.so
libtfutils.so
I suggest make a copy of these files before proseeding and put them in a recovery file to revert changes.
Note, tried to update libsurfaceflinger.so but phone won't boot, therefore its removed.
Download
Where do you want it moving to?
It looks like it belongs in Development. Is this for another device?
Can you say what exactly this update do? better media playback?
Fugu tweaks are System server and app process, from sgs
Which device are these from?
you've done ......."more"...
why not call it something else?
is this usable tweak for overcome 4
please specify what will be change/diffrent before and after use this tweak,thank you.
tried IRS below to test it out and it worked great back on KitKat
SRS Audio HD [SRS GEQ - Acoustic + SRS TruBass - 50% + SRS Dialog Clarity - 50%]
I finally updated to lolipop, i have V4a working except the IRS file isn't being detected.
Beats Audio for example works just fine, but nothing changes when i go to the SRS irs above.
Any advice? I've posted in nearly every V4a thread i could find and i keep getting told to reach out to maker of IRS file :\
Device: Nexus 7 2013
OS: 5.1.1.
Rom: Optipop
Kernel - Elemental X
SElinux - permissive
No other audio processors installed
BusyBox on rails installed and ran
Media Player: Power amp.
Prior on Kitkat, i had to install it as a user app, and then use the banned app to move it to system\app in order to get all IRS files to work. IRS files are crucial to me because i use my N7 2013 in dash in my car.
On lolipop, no matter what method i use (whether i install apk, move apk to system\app or flash viper4android zip files), i can get it to process audio under poweramp, but irs files aren't being truly recognized (some are)
Any suggestions?
P.s. - i have been using the following two zips from these threads :
http://forum.xda-developers.com/lg-...-viper4android-lollipop-t3075794#post60588642
and
http://forum.xda-developers.com/google-nexus-5/themes-apps/discussion-viper4android-t2543796
as well as the apk from the official site.
EDit: read the last 3 pages, I will try the APK method on it's own as a user app, will report back.
Edit: installed 4.x apk , installed drivers , set my settings, rebooted, used the "banned" app to move to system app. Convolver IRS files work flawlessly, and i have to set it to compatible mode, but now i have constant popping in audio :\
What version of SELinux Mode Changer are you using?... I had issues getting the latest version (3.01) to work. I went back to SELinux Mode Changer 1.2 and Viper4Android FX v.2.3.4.0 to get it to work on my N7 2013. It does not boost the volume up that much, but it provides better clarity at a higher volume. I'm running Viper on "Stock" LP 5.1.1 rooted.
Edit: Also try testing using a different player and check the Driver Status under Viper.'s setting to check if it's processing.
tamanaco said:
What version of SELinux Mode Changer are you using?... I had issues getting the latest version (3.01) to work. I went back to SELinux Mode Changer 1.2 and Viper4Android FX v.2.3.4.0 to get it to work on my N7 2013. It does not boost the volume up that much, but it provides better clarity at a higher volume. I'm running Viper on "Stock" LP 5.1.1 rooted.
Edit: Also try testing using a different player and check the Driver Status under Viper.'s setting to check if it's processing.
Click to expand...
Click to collapse
I used version 2.0.2
It worked fine in changing it (latest one didn't).
Also, it's processing, it's the Convolver and IRS that isn't.
bump
help
bump!
interesting turn of events, i used the lolliviper zip above in the links, and then moved it manually back to user app but left the preinstalled drivers and audiopolicy included in the zip in the system files.
v4a disappeared, okay no biggie, reinstalled the apk from the official site, settings were all there, drivers were already installed from prior installation. Poweramp works, all irs files work, no cracking or popping.
What a complicated route to take to make sure all irs files and poweramp to work, but the audiopolicy is key, i can upload it for those who are interested to decipher for me what i cannot specifically
bump
Still need help, 3.5mm connection via n7 2013 on power amp +5.1.1 + v4a = static and popping
C-Apps Cm 13/Cm 12.1/Aosp/Layers(RRO)
Cyanogen recently presented a new package for users running Cyanogen Mod 12.1 ROMs containing Cyanogen Apps.
NOTEThis mod will work on any device running Cm 12.1/Cm13.0/Aosp/RRO (5.1.1 or 6.0) based ROMs.
To get this running successfully, update your ROM to latest build.
I would be great full if you post the specific ROM name in which you tried this mod, so that other's might find it helpful.
This package includes
Cm Dialer (true caller integrated & new call UI)
Cm theme chooser
Cm app themer(per app themes)
Cm theme store
Cm account manager
Cm audiofx (new ui & more presets)
Email by Boxer
Cm gallery(Updated)
Screencast
CM 13.0 users
As this build is for Cm 12.1 but Cm 13.0 users should not be disappointed as I tried flashing this in it which gave a dialer FC(Force Close) i.e u won't be able to recieve/make calls. I managed to make another zip for Cm 13.0 users including everything except Dialer.So that they can also get the cyanogen OS taste.
Aosp/Layers based ROM users
One of my mate Doyle Fermi, helped me by flashing this zip and letting me know the stats, about this package working or not in Aosp / Layers based ROMS. So I removed CM theme chooser & CM theme store..!! To manage fc's and problems. Now users on Layers /aosp roms can also flash this zip. Every thing works except Cm theme stores n themes as they are removed..!!
Package Links
1. For Cm 12.1 users
https://userscloud.com/ebanp0cp77w0/capps-cm12.1-biplov.zip
2. For Cm 13.0 users
https://userscloud.com/zij8yf1rnjwe/capps-cm13.0-biplov.zip
3.For Aosp/Layers users
https://userscloud.com/xvah9pc0ggl3/capps-aosp-biplov.zip
Installation procedure
1. Reboot to recovery
2. Install zip > Select package
3. Reboot
That's all.......!!!:angel:
How to Remove this mod?Access to Addon.d folder via any root explorer i.e "root/system/addon.d/"
From there delete the file named "01-cyngn.sh"
After deleting do a dirty/fresh install of your particular CyanogenMod/Aosp/RRO based ROM.
Check Attachments for Screenshots.. :good: :laugh:
Cyanogen Blog LInk:good:
http://www.cyanogenmod.org/blog/introducing-the-cyanogen-apps-package?preview=true
Contributers @doylefermi , @war_machine28 , @Beast_Slayer , Team Cyanogen
Helpful info
*Info about new audio fx*
If you have installed/ flashed an extra audio driver except audio fx i.e Dolby/Viper 4Android/Extreme audio mod/etc.
First uninstall them to get audio fx working properly.
*Some general Doubts*
1.I'm on Cm 12.1/13.0 based rom and I wish to have old theme engine (theme's app) and other new things!
-> Flash 3rd zip (Aosp/rro) in ur Cm 12.1/13
2.Why is my dialer not replaced in Cm 13.0 as given in ss?
-> Read Cm 13.0 users section above, you'll get the reason.
3.Theme's app in menu says no result and shows no new theme's to download in cm 13.0!
-> This is because Cyanogen is about to release Theme showcase for 6.0 and Cm 13 themes are yet to be integrated in theme showcase app.
4.So, if theme's app in menu says no result, how to select or apply installed theme in cm 13.0?
->Settings>Themes here you'll get it.
5.In Cm 13.0, audio fx on Headset mode doesn't shows any effect/changes!
-> While u plug in headsets, use Speaker mode for that too..! (Will b fixed soon)
6.Im on 'So and so' ROM based on So and so...! And i don't wish to keep New Email by boxer app!
->Install titanium backup and freeze that app.
7.I want True dialer in Cm 13.0, what to do?
-> We are working on it.
*Have more quarries, ping me*
Whats App -> +919405228414
Telegram -> http://telegram.me/Biplov_13
Biplov Biswas said:
C-Apps
Cyanogen recently presented a new package for users running Cyanogen Mod 12.1 ROMs containing Cyanogen Apps.
NOTEThis mod will work on any device running Cm 12.1/Cm13.0 (mod zip available).
To get this running successfully, update your ROM to latest build.
This package includes
Cm Dialer (true caller integrated & new call UI)
Cm theme chooser
Cm app themer(per app themes)
Cm theme store
Cm account manager
Cm audiofx (new ui & more presets)
Email by Boxer
Cm gallery(Updated)
Screencast
CM 13.0 users
As this build is for Cm 12.1 but Cm 13.0 users should not be disappointed as I tried flashing this in it which gave a dialer FC(Force Close) i.e u won't be able to recieve/make calls. I managed to make another zip for Cm 13.0 users including everything except Dialer.So that they can also get the cyanogen OS taste.
Package Links
1. For Cm 12.1 user's
http://d-h.st/w396
2. For Cm 13.0 user's
http://d-h.st/9H6y
Installation procedure
1. Reboot to recovery
2. Install zip > Select package
3. Reboot
That's all.......!!!:angel:
How to Remove this mod?Access to Addon.d folder via any root explorer i.e "root/system/addon.d/"
From there delete the file named "01-cyngn.sh"
After deleting do a dirty/fresh install of your particular CyanogenMod ROM.
Check Attachments for Screenshots..:good::laugh:
Cyanogen Blog LInk:good:
http://www.cyanogenmod.org/blog/introducing-the-cyanogen-apps-package?preview=true
Click to expand...
Click to collapse
Gr8..work..smokky..! God bless u!. .
Nice, now downloading
Thanks bro
Awesome
Works Flawlessly :laugh:
prabhuinbar said:
Works Flawlessly :laugh:
Click to expand...
Click to collapse
Thanks
AudioFX doesn't seem to work on CM13. I mean it doesn't show any error but it can't detect when I plug in my earphones. Even if I manually enable it by going into headset settings, I can't observe any difference in sound.
AkkiV said:
AudioFX doesn't seem to work on CM13. I mean it doesn't show any error but it can't detect when I plug in my earphones. Even if I manually enable it by going into headset settings, I can't observe any difference in sound.
Click to expand...
Click to collapse
For now..!! Whn u plug in head/ear phones use "Speakers" in audio fx n try out the presets..! I'll try to bring up a new build soon with that fixed.!!✌? Jst use Speaker settings for head sets for now ..!
Will this work on AOSP Layers ROM based on CM12. 1 ?? I'm using SLIP LP
Any help will be appreciated
Thanks in advance
spacexgen said:
Will this work on AOSP Layers ROM based on CM12. 1 ?? I'm using SLIP LP
Any help will be appreciated
Thanks in advance
Click to expand...
Click to collapse
New build coming in couple of hour..!! For Aosp and Layers based roms don't worry
spacexgen said:
Will this work on AOSP Layers ROM based on CM12. 1 ?? I'm using SLIP LP
Any help will be appreciated
Thanks in advance
Click to expand...
Click to collapse
Link updated... Dwnld 3rd package.. I.e Aosp/layers one
theme and theme choose fc. I am on aosp based chroma rom ( latest aosp MM base)
ddarshan said:
theme and them choose fc. I am on aosp based chroma rom ( latest aosp MM base)
Click to expand...
Click to collapse
I shared a different zip for aosp roms(3rd one) u need to flash that on ur device..! As aosp dsnt supprts theme engine so they gave fc's. U flshed d wrng zip. Read Aosp section for more info in 1st post.
And regarding those force close... Read How to remove this mod.. Den remove it nd flash d crrct zip( aosp one )
Biplov Biswas said:
I shared a different zip for aosp roms(3rd one) u need to flash that on ur device..! As aosp dsnt supprts theme engine so they gave fc's. U flshed d wrng zip. Read Aosp section for more info in 1st post.
And regarding those force close... Read How to remove this mod.. Den remove it nd flash d crrct zip( aosp one )
Click to expand...
Click to collapse
i have flashed the third zip which is for aosp right?
I'm currently running a cm13 build from sultan on my OnePlus One. Should this package work on my device? (the second one)
is it work on cm12.1 by temasex?
kangramdan666 said:
is it work on cm12.1 by temasex?
Click to expand...
Click to collapse
It should!!..
Sent from my MI 3W using Tapatalk
@War_machine28 said:
It should!!..
Sent from my MI 3W using Tapatalk
Click to expand...
Click to collapse
I am latest CM 12.1 nightlies, everything works flawlessly. I love the trucaller integrated dialer.
Dude sorry this is development thread there's the thread for themes and apps
Biplov Biswas said:
Link updated... Dwnld 3rd package.. I.e Aosp/layers one
Click to expand...
Click to collapse
Thanks a lot for making it for AOSP/Layers based ROM, 100% Working fine with my SlimLP ROM.
DESCRIPTION
As you all know, MIUI Camera has been ported to Mi5 (gemini) from MI A1 by @stars2 which seems to work on Redmi 3S too. So I decided to create a thread about it so that every Redmi 3S users gets notified about it.
Also as mentioned by @stars2 in his thread https://forum.xda-developers.com/mi-5/themes/app-miui-camera-ported-xiaomi-mi-a1-t3670607 that to add full features on other devices rename the MiuiCamera.apk/assets/decvice_features.xml/gemini.xml file to our own device codename. And as it difficult for a normal user to decompile, edit and recompile the apk, I done that thereby, unlocking all the features.
NOTES
THIS IS NOT MY WORK. THIS IS DONE BY @stars2. I'M JUST SHARING HIS WORK
V7 IS ORIGINALLY MADE BY @maxsmeller. I HAVE JUST MODIFIED THE APK AND RECOMPILED THE ZIP. SO ALL CREDITS GOES TO HIM.
V8 IS ORIGINALLY MADE BY @shreyas_kulkarni. I HAVE JUST MODIFIED THE APK AND RECOMPILED THE ZIP . SO ALL CREDITS GOES TO HIM.
ALL FEATURES COMPATIBLE WITH LAND HAS BEEN UNLOCKED
BASE UPDATED TO OREO (NOW FULLY COMPATIBLE WITH 8.x & 9.x ROM'S
V12 & V13 IS ONLY FOR 9.x ROM'S
WHAT CHANGES I DID IN V1?
- DECOMPILED MIUICAMERA.APK
- EXTRACTED GEMINI.XML
- RENAMED GEMINI.XML TO LAND.XML
- REPLACED GEMINI.XML WITH LAND.XML
- RECOMPILED MIUI CAMERA.APK
- REPLACED NEW MIUI CAMERA. APK IN THE FLASHABLE ZIP FILE
WHAT CHANGES I DID IN V2 ?
- REMOVED GROUP SELFIE OPTION FROM THE APK
- DELETED GROUP SELFIE LIBS
- RECOMPILED ZIP
WHAT CHANGES I DID IN V3 ?
- BROUGHT BACK GROUP SELFIE OPTION
- FULLY FIXED GROUP SELFIE
- RECOMPILED ZIP
WHAT CHANGES I DID IN V4 ?
- ADDED SCENE MODE
- RECOMPILED ZIP
WHAT CHANGES I DID IN V5 ?
- DECOMPILED MIUICAMERA.APK
- EXTRACTED GEMINI.XML
- RENAMED GEMINI.XML TO LAND.XML
- REPLACED GEMINI.XML WITH LAND.XML
- CHANGED CAMERA ICON
- RECOMPILED MIUI CAMERA.APK
- RECOMPILED NEW FLASHABLE ZIP
WHAT CHANGES I DID IN V6 ?
- DECOMPILED MIUICAMERA.APK
- EXTRACTED GEMINI.XML
- RENAMED GEMINI.XML TO LAND.XML
- REPLACED GEMINI.XML WITH LAND.XML
- CHANGED CAMERA ICON
- RECOMPILED MIUI CAMERA.APK
- RECOMPILED NEW FLASHABLE ZIP
- BROUGHT BACK "Save To SDCard" OPTION
- TWEAKS FOR HDR (CAMERA 2 API HAS TO BE DISABLED)
WHAT CHANGES I DID IN V7 ?
- USED THE PORT BY @maxsmeller https://forum.xda-developers.com/xiaomi-redmi-3s/themes/miui-camera-port-mod-hdr-denoise-t3685529
- MODIFIED THE APK (CHANGED ICON)
- RECOMPILED ZIP
WHAT CHANGES I DID IN V8 ?
- USED THE PORT BY @shreyas_kulkarni http://www.mediafire.com/file/86lk4..._ROMs]Ultimate_MIUI_Cam_MOD_By_SK21122000.zip
- MODIFIED THE APK (CHANGED ICON)
- MODDED TO WORK IN 8.x OREO
- RECOMPILED ZIP
WHAT CHANGES I DID IN V8.1 ?
- ADDED "Save To SDCard" OPTION
WHAT CHANGES I DID IN V9 ?
- PORTED CAMERA FROM MI A1 STOCK OREO ROM
WHAT CHANGES I DID IN V10 ?
-ENABLED ALL FEATURES WHICH WERE MISSING IN V9
WHAT CHANGES I DID IN V11?
- PORTED FROM MI A2 STOCK ROM
WHAT CHANGES I DID IN V12?
- MADE COMPATIBLE WITH 9.x ROM'S
WHAT CHANGES I DID IN V13?
- PORTED FROM LATEST MI A2 ROM
- ADDED BEAUTIFY 3.0
- ADDED SOME MISSING OPTIONS
- FIXED SOME BUGS
HOW TO INSTALL
- REBOOT TO RECOVERY
- SELECT THE FILE
- SWIPE TO CONFIRM FLASH
- WIPE CACHES/DALVIK
- REBOOT
- GO TO SETTINGS - APPS - CAMERA AND GIVE ALL PERMISSIONS
- FOR USERS WHO ALREADY FLASHED V1 DELETE "MiuiCamera" FOLDER FROM "system/priv-app" THEN FLASH V2
- FOR USERS WHO ALREADY FLASHED V2, NORMALLY FLASH V3
- FOR USERS WHO ALREADY FLASHED V3 DELETE "MiuiCamera" FOLDER FROM "system/priv-app" THEN FLASH V4
- FOR USERS WHO ALREADY FLASHED V4 DELETE "MiuiCamera" FOLDER FROM "system/app" THEN FLASH V5
- FOR USERS WHO ALREADY FLASHED V5 DELETE "MiuiCamera" FOLDER FROM "system/app" THEN FLASH V6
- FLASH V7 NORMALLY FROM TWRP AND WIPE CACHES/DALVIK
- FOR USERS WHO ALREADY FLASHED V7 FLASH UNINSTALLER THEN FLASH V8.
- FOR USERS WHO ALREADY FLASHED V8, NORMALLY FLASH V8.1
- BEFORE FLASHING V11, FLASH UNISTALLER
HOW TO UNINSTALL
- REBOOT TO RECOVERY
- FLASH UNINSTALLER
- WIPE CACHES/DALVIK
- REBOOT
DISCLAIMER
I'M NOT RESPONSIBLE FOR ANYTHING. TRY THIS ON YOUR OWN RISK.
BUGS
- AGE & GENDER
- TIME AND DATE STAMP
- BEAUTIFY FIXED IN V13
- SLOW MOTION RECORDING DOESN'T WORK, BECAUSE IT'S NOT SUPPORTED BY LAND HARDWARE. SET VIDEO RECORDING QUALITY TO SD (480p) TO GET SLOW MOTION WORKING.
CREDITS
- @stars2
- @maxsmeller
- @shreyas_kulkarni
- Me
DOWNLOADS
V1 https://drive.google.com/file/d/0B7fIOZZgI8cVeG40THRPeEN5UUE/view?usp=drivesdk
V2 https://drive.google.com/file/d/0B7fIOZZgI8cVMGhUUkFLU1hIN2M/view?usp=drivesdk
V3
https://drive.google.com/open?id=0B7fIOZZgI8cVMWVuZnpFa04tR0U
V4
https://drive.google.com/file/d/0B7fIOZZgI8cVSG43LXZGS2QwZVk/view?usp=drivesdk
V5
https://drive.google.com/file/d/0B7fIOZZgI8cVRElvN3N6b2ZLX2s/view?usp=drivesdk
V6
https://drive.google.com/file/d/0B7fIOZZgI8cVYkJBNlBUVmN1elk/view?usp=drivesdk
V7
https://drive.google.com/file/d/0B7fIOZZgI8cVZi1tNFJvbW1lUWs/view?usp=drivesdk
V8
https://drive.google.com/file/d/1sUKpvrc4ceKQzhXdKoOLBkOnmpVuAb8K/view?usp=drivesdk
V8.1
https://drive.google.com/file/d/1v91MiceHymkC83l7O3wSAbjcQDt0dgGH/view?usp=drivesdk
V9
https://drive.google.com/file/d/1Y_bkVf3mGOQKF-mcPu-hiwGVov7n8oaN/view?usp=drivesdk
V10
https://drive.google.com/file/d/1Eyo84ecsw0pp79IxPHE6taAhvDfWr2Tk/view?usp=drivesdk
V11
https://drive.google.com/file/d/1FMz5OLAvrX11DCLgPGk6jeyNqrVzzn62/view?usp=drivesdk
V12
https://drive.google.com/file/d/1K6nCReakpoC-67i81nNxM8IBBBCLqTpB/view?usp=drivesdk
V13
https://drive.google.com/file/d/1SEN0X55e4LfTAqWXM61yZ8fW3og9QBpI/view?usp=drivesdk
UNINSTALLER
https://drive.google.com/file/d/0B7fIOZZgI8cVMTA4MTRBdnlDb1k/view?usp=drivesdk
XDA DevDB INFORMATION
MIUI CAMERA FOR REDMI 3S/PRIME/PLUS/X
CREATED - 2017-09-17
STABLE BETA DATE - 2018-11-19
LAST UPDATED - 2018-11-19
downloading
I would highly recommend all users to try this port. Solution for dark video in custom roms(personally tested). HDR works well!
@mizdrake7, someone in the group reported that HDR doesn't work with camera2api. Care to test and include that in the OP?
william.johhn7! said:
I would highly recommend all users to try this port. Solution for dark video in custom roms(personally tested). HDR works well!
@mizdrake7, someone in the group reported that HDR doesn't work with camera2api. Care to test and include that in the OP?
Click to expand...
Click to collapse
HDR works with camera 2 api
Awesome work! @mizdrake7
Awesome work!! Now no more dark video recording and bad photo quality on our beloved nougat custom roms???
Okay , thank you , and please fix the remaining bug
---------- Post added at 09:01 PM ---------- Previous post was at 08:58 PM ----------
can i install this camera on Marshmallow cusrom?
Sakti Adrian said:
Okay , thank you , and please fix the remaining bug
---------- Post added at 09:01 PM ---------- Previous post was at 08:58 PM ----------
can i install this camera on Marshmallow cusrom?
Click to expand...
Click to collapse
Yes
mizdrake7 said:
Yes
Click to expand...
Click to collapse
Bootloop while installing on ZenUi 3.0 Roms :laugh:
Can't connect to camera
Tested on aex,aosip and xperience ROM.
I'm on RR latest and app says can't connect to camera,someone please provide solution.
****update****
Solved that issue,just go to permissions of apps and grant all permission. Now camera will work like stock.
Interesting development. Not working on my LOS 14.1, though. With or without camera2api enabled.
Update: it works with Avik423's solution. Thank you very much!
It works on aex and rr if you give permissions. Thanks.
The camera quality is still not that good..
Works on the last Remix. You have to manually grant permissions as you wrote earlier. Thank you.
What's group selfie function in this camera, doesn't see in stock miui camera MM
bootloop on miui 9 v7.9.8 build
any upload the stock miuicamera for my rom? havent took any backup -_-
After moving from mi I was really missing mi stock cam ,but wasn't willing to go back just for cam?
BUT NOW ITS LIKE DREAM COMES TRUE...????
just flash 7.9.8 recovery should fix the problem
Works great no RR..now im not going back to miui..thanx