i dont own this rom i have solved the problem in flash google update binary
credits
@Amit.A for making our rom for note 3 neo
@Gabri98 for helping me
@sgatechwork For His custom Kernal And Scripts
@darkera13 For Some Apps
@Albe95 for 6.0 App icons
original forum: https://forum.xda-developers.com/note-3-neo/development/rom-noblerom-t3307389
lots of people got problem while updrading this rom so i fixed small issue all are woking
by the way i dont have n7505 rom
please Fill my Thanks Meter <3
download:
drive link : https://drive.google.com/open?id=1yYLfIy_-zrncd-ryq4Xpky03rpnoXroo
if any errors pm me will solve it Dont forget about thanks meter:good: :highfive:
4g is here
susheel1918 said:
i dont own this rom i have solved the problem in flash google update binary
credits
@Amit.A for making our rom for note 3 neo
@Gabri98 for helping me
@sgatechwork For His custom Kernal And Scripts
@darkera13 For Some Apps
@Albe95 for 6.0 App icons
original forum: https://forum.xda-developers.com/note-3-neo/development/rom-noblerom-t3307389
lots of people got problem while updrading this rom so i fixed small issue all are woking
by the way i dont have n7505 rom
please Fill my Thanks Meter <3
download:
drive link : https://drive.google.com/open?id=1yYLfIy_-zrncd-ryq4Xpky03rpnoXroo
if any errors pm me will solve it Dont forget about thanks meter:good: :highfive:
Click to expand...
Click to collapse
https://drive.google.com/drive/folders/1CWksBijU_tIrRLyXXjwL_evwpa9qi0Mw?usp=sharing
3g version is working but available only english language. I enabled my language using "Language Enabler". download from play store.
Stuck at boot Samsung screen logo after flashing
iDK
tanaybitw said:
Stuck at boot Samsung screen logo after flashing
Click to expand...
Click to collapse
Bro i checked it again it is working now try again wipe\cache and data also Best of luck
I am completely noob,
could someone give me some tutorial for this custom rom
on the original post, the install instruction link has been dead
Many thanks bro
please fix screen mirroring.
"unfortunately, settings has stoped" when activating screen mirroring from quik setting.
help me...
This is a complete backup of this rom.
Download the rar file, extract it, copy the TWRP folder to the root of the external sd.
Install the TWRP present in the rar file like this:
Open odin, click on PDA / AP select Twrp Recovery For Sm-n7505 4g only.tar.
Put your phone into download mode with Volume - home and power buttons.
Connect the usb cable.
Press start.
At the end of the operation, enter recovery with Volume + Home, and power.
Select Wipe / adwance wipe.
Select System, data, cache, internal storage.
Clean.
Press back.
Press restore backup, select ext sd card.
Click on Backup, swipe.
https://drive.google.com/file/d/1zQvTp1W3tk50i98r9dq3Ol8WxZmxVE3X/view?usp=sharing
thanks a lot I've been searching this rom for a long time
Unknowin_man said:
https://drive.google.com/drive/folders/1CWksBijU_tIrRLyXXjwL_evwpa9qi0Mw?usp=sharing
Click to expand...
Click to collapse
This one is the V4 for N7595?
Blafio said:
This is a complete backup of this rom.
Download the rar file, extract it, copy the TWRP folder to the root of the external sd.
Install the TWRP present in the rar file like this:
Open odin, click on PDA / AP select Twrp Recovery For Sm-n7505 4g only.tar.
Put your phone into download mode with Volume - home and power buttons.
Connect the usb cable.
Press start.
At the end of the operation, enter recovery with Volume + Home, and power.
Select Wipe / adwance wipe.
Select System, data, cache, internal storage.
Clean.
Press back.
Press restore backup, select ext sd card.
Click on Backup, swipe.
https://drive.google.com/file/d/1zQvTp1W3tk50i98r9dq3Ol8WxZmxVE3X/view?usp=sharing
Click to expand...
Click to collapse
I followed every step you listed, until I had to restore, but no file was detected to be restored as a backup from twrp, I put the "TWRP" file containing the backup in the ext sd as you said, but nothing. another question, is data and sim working on this rom?
Yaser West said:
I followed every step you listed, until I had to restore, but no file was detected to be restored as a backup from twrp, I put the "TWRP" file containing the backup in the ext sd as you said, but nothing. another question, is data and sim working on this rom?
Click to expand...
Click to collapse
Do this:
With your rom, even if it is stock, install the TWRP, make a backup even of the cache.
Then take the file linked by me, and replace it in your backup.
should recognize it.
Data and sim work.
Blafio said:
Do this:
With your rom, even if it is stock, install the TWRP, make a backup even of the cache.
Then take the file linked by me, and replace it in your backup.
should recognize it.
Data and sim work.
Click to expand...
Click to collapse
Thank you very much bro, it worked, finally i get this rom, with data too, last question, wich version is? V1, V2 or V3?
Yaser West said:
Thank you very much bro, it worked, finally i get this rom, with data too, last question, wich version is? V1, V2 or V3?
Click to expand...
Click to collapse
I don't know what version it is.
For the 4G version, it didn't make multiple versions.
If you go to the second post of the developer who created it, there is a version, while for the 3g model the V4 is mentioned
ı cant open drive link pls give me new link for n750 3g pls
ım waiting
Blafio said:
This is a complete backup of this rom.
Download the rar file, extract it, copy the TWRP folder to the root of the external sd.
Install the TWRP present in the rar file like this:
Open odin, click on PDA / AP select Twrp Recovery For Sm-n7505 4g only.tar.
Put your phone into download mode with Volume - home and power buttons.
Connect the usb cable.
Press start.
At the end of the operation, enter recovery with Volume + Home, and power.
Select Wipe / adwance wipe.
Select System, data, cache, internal storage.
Clean.
Press back.
Press restore backup, select ext sd card.
Click on Backup, swipe.
https://drive.google.com/file/d/1zQvTp1W3tk50i98r9dq3Ol8WxZmxVE3X/view?usp=sharing
Click to expand...
Click to collapse
doesnt work
Related
Hi,
I have a Kindle Fire and I followed your instruction on hhow to install Android.
I have rooted it and installed TWRP but I can not continue because no laptop can see my Kindle in order to copy on it the Android kit. Hence I have only the TWRP interface and I can not do anything.
How can I continue or how can I reinstall the Kindle Fire OS ?
Do you have any idea ?
Thanks,
Vlad
fill in captcha and download this http://loadbalancing.modaco.com/down...d088324a46.zip
select mount in twrp transfer this rom zip to your sd card but dont place it in a folder
then select unmount
go to install make sure you can find it
then hit the home button select wipe
wipe factory reset
wipe cache
wipe dalvik
wipe system
then go home again
select install again tap on rom zip flash it let it finish
then select reboot
enjoy your lovely rooted kindle fire
this is just rooted stock with playstore if you wish to try other roms use the same method with the exception of making a backup first
Hi,
Thanks for the response,but the link doesn't work and I can not download the zip file.
Second, how can I transfer the file, because I can not see my Kindle on windows explorer. Is there a command through cmd ?
Thepooch said:
fill in captcha and download this
select mount in twrp transfer this rom zip to your sd card but dont place it in a folder
then select unmount
go to install make sure you can find it
then hit the home button select wipe
wipe factory reset
wipe cache
wipe dalvik
wipe system
then go home again
select install again tap on rom zip flash it let it finish
then select reboot
enjoy your lovely rooted kindle fire
this is just rooted stock with playstore if you wish to try other roms use the same method with the exception of making a backup first
Click to expand...
Click to collapse
vladi21 said:
Hi,
Thanks for the response,but the link doesn't work and I can not download the zip file.
Second, how can I transfer the file, because I can not see my Kindle on windows explorer. Is there a command through cmd ?
Click to expand...
Click to collapse
try this http://forum.xda-developers.com/showthread.php?t=1439916 not the altrom version and you have to fill in the captcha to get the download at regular speed and I told you how to transfer the file select mount in twrp there should be no checks in system and data.....cache and sd should have checks should be like this by default hit the big button that says mount this will allow you to view your sd card contents simply just copy the rom.zip there and follow the rest of my instructions....
It worked
Now the Wi-fi is not working, I have to install different drivers ?
Thepooch said:
try this http://forum.xda-developers.com/showthread.php?t=1439916 not the altrom version and you have to fill in the captcha to get the download at regular speed and I told you how to transfer the file select mount in twrp there should be no checks in system and data.....cache and sd should have checks should be like this by default hit the big button that says mount this will allow you to view your sd card contents simply just copy the rom.zip there and follow the rest of my instructions....
Click to expand...
Click to collapse
the wifi should work perfectly unless your router has issues or its some strange adhoc thing try power off then back on a couple of times make sure your wifi password is correct select forget network then re-enter the info for your wireless connection... remember to make a backup next time you enter recovery.. if you still have issues try another rom with the same wipes in the same order.... this 1 is pretty nice if you wanna stick with gingerbread http://forum.xda-developers.com/showthread.php?t=1390773 just remember to flash gingerbread gapps after the rom full instructions in the op.. but include the ones I gave you
Hi,
I'm new here and I'd like to install a new ROM on my Gio but I want to make sure I know what I'm doing before trying something and bricking my phone. :angel:
ClockWorkMod
I installed CWM v5.2.0.6 (followed the instructions here). Is this ok, or do I need to install v5.0.2.7? And if I do need a newer version, is there a way to get an update or do I have to follow the same steps as before?
1.Download the CWM 5.0 v2 and copy to the Root (not in any folder) of your SD card
2. Put your phone in recovery Mode(press: Home button + Power button toghether)
3. In recovery mode, select the downloaded file from SD-card(Use Volume keys to navigate and home button for enter).
4. Search for the root gb updated.zip file on your SD-card
5. Run the update
6. Reboot
Click to expand...
Click to collapse
I tried creating a backup with the CWM version I have, but I get this error: "Can't mount /system".
CWM does create a folder in sdcard/ clockworkmod/ backup/ date, but it only contains the following files:
recovery.img and boot.img.
However, this post says I should actually have more files in the backup folder:
.android_secure.vfat.tar ,boot.img , cache.ext4.tar , data.ext4.tar , nandroid.md5 , recovery.img, system.ext4.tar.
Is this because of my CWM version? Or maybe because I still have the operating system that came with my device (+updates)?
What I really want to know is: can I rely on this backup, will it work?
ROMs
I want to install CM10.1.5 from here, but I have many questions and I don't really know where to look for answers. (Sorry, I really am a complete noob.)
What's the difference between androidarmv6 jenkins build and mardon build? And what's the difference between the 3 versions? Can I just install the Version with CM-Superuser and not worry about it?
Should the updates be installed via CWM - apply update from SDcard? What about the additions - CWM --> install zip from SDcard?
How can I install extras if they are "not CWM flashable"?
What happens to my apps when I install a new ROM? Do I have to install them all again? Is all data lost? Or will they all be restored from my google account and the SD card or something like that?
Finally, how can I use the ext2 partition in my SDcard to install apps? Is this function included in the ROM? Or do I need to install something else? a2sd darktremor? If yes, how (I find the instructions here confusing and overwhelming, and the post is old, so probably outdated)? Or should I use the "Link2SD" addition to the ROM?
I'm sorry for asking so much, but I'm feeling kind of lost.
Thanks in advance.
Anyone?
I've continued trying to figure things out when I have time. I'll post what I find in this thread, in case someone else comes here looking for answers to similar doubts/problems.
In trying to understand what's going on with ClockWorkMod Recovery, I found this very useful link:
wwwDOTtechbiiDOTcom / cwm-recovery-cant-mount-system-error-solution-how-to/
(sorry for the DOTs and spaces, can't post outside links yet)
CWM Recovery – Can’t Mount System Error Solution [How To]
(...)
The error is an expected one and happens generally when you are trying to backup a stock ROM using the clock work mod recovery. Please, note that you can’t do a completed nandroid backup of a stock firmwares. So, just install any custom ROM and then you can backup and restore anytime.
Click to expand...
Click to collapse
If I understood correctly, the best (only?) way to return to stock ROM is to install Odin or similar firmware flashing tool and to get the stock firmware from sites like sammobile.com and sampro.pl. However, it also says that not all firmwares might be available and I haven't looked more into it all of this yet.
Did you root your phone yet?
That should solve the problem from the can't mount system, data, etc
If you need more information, then look at this post http://forum.xda-developers.com/showthread.php?t=1397120
HerroYou said:
Did you root your phone yet?
That should solve the problem from the can't mount system, data, etc
If you need more information, then look at this post http://forum.xda-developers.com/showthread.php?t=1397120
Click to expand...
Click to collapse
Yes, I used the instructions there to root my phone and install CWM (v5.0.2.6), but that thread is 2 years old, so I'm afraid it won't be up to date in relation to certain things. For example, I did create an ext2 partition on my SD card using those instructions, but I found an easier way to move apps from my phone to the SDcard (using the link2SD app, available on Google Play). The information about ROMs is also not up to date.
If you want to install a custom rom just
-wipe data factory reset
-wipe cache partition
-advance>wipe dalvik cache
-install zip from sdcard
-reboot
NOTE: the zip is the rom
HerroYou said:
If you want to install a custom rom just
-wipe data factory reset
-wipe cache partition
-advance>wipe dalvik cache
-install zip from sdcard
-reboot
NOTE: the zip is the rom
Click to expand...
Click to collapse
Thank you.
My main concern at the moment is how to restore my original ROM if something should go wrong, though. I've found some interesting information in this thread but I've been busy this week and I'll need to go back and read it all with more attention before I try something.
Download ODIN 4.42 and GIO ops and a sotckrom MD5 file then put it into the odin and put your phone into recovery mdoe and plug it into your computer. Then click start
you have to put your phone in downloadmode to flash with odin as far as i know,but i have an other question;
can you use heimdall with the samsung galaxy gio
I am trying to flash a new recovery on my samsung galaxy gio with ODIN after it is bricked flashing tass- 6.0.4.5.zip(this cwm seems for the mini!!!) is this possible and if so,which one can?and how to do that...
thanks in advance
Yes it is possible and you need ODIN 4.42, GiPS and a Stock Rom extracted out of the zip.
Here is a video to help you because I am too lazy to explain
http://www.youtube.com/watch?v=euZqtaAMe5c
Guide & Mod:Telcast G18 mini 3G tablet [CWM Recovery][Stock Firmware][Partition Data]
Guide & Mod : Telcast G18 mini 3G tablet [CWM Recovery][Stock Firmware][Partition Data]
Hello,
I got myself a nice 7.9 inch Android 4.2.2 Tablet [16Gb].
This is a new tablet so no rom/mod information about it so I decided to put few things together.
I messed up my Modem/Radio trying to make CMW mod recovery but got lucky and found a Chinese forum with a stock rom.
That gave me confidence to mod like hell till I got myself a working CWM Recovery
Youtube Video of tablet
http://www.youtube.com/watch?v=Ybz6yymWM7I&feature=c4-overview&list=UUUAnm9j-J2x3_nDDDxO2nlQ
Warning! use this guide at your own risk.
Root Guide:
Just download Framaroot apk and run it! It will ask you to reboot and that’s it...You are Rooted!.
CWM Mod Recovery Guide:
Download the G18mini Recovery and flash with MobileUncle.apk
Place the .img in the root of SD then launch the app and click update recovery. Tablet will then reboot into CWM . Do a full nandroid back up!! You will need it in the future or if you want to partition.
Or Flash with SP Flash tool (can find easily on XDA and included in full firmware DL)
Partition /data for more storage Guide:
This tablet only has 1GB for apps which is lame!
Make sure you have Nandroid Backup before doing this and copy the backup to external SD (required)!!! or use Rom manager to backup to external SD!
Install meteos-mtk6589-rom-edit-8gb-16gb-en APK
Run it and click the 4GB and follow the instructions and reboot into recovery.
Wipe/reset then do an Nandroid restore from external SD
It will show failed to restore SDCARD but don’t worry, boot into the tablet and format/erase internal (Flash storage)
Turn off the tablet then hold volume up and power to boot recovery. Do a full nandroid restore again from external SD…DONE!
You will now have 3.9GB for apps and 9.7GB internal storage!
Restore to Factory:
Stock Firmware DL has a PDF in chinese but screenshots should be enough to restore the tablet top factory stock (it uses SP Flash)
Files:
Framaroot
Direct DL http://d-h.st/tKB
http://forum.xda-developers.com/showthread.php?t=2130276
Thanks Alephzain
-------------------
G18 Mini CWM Recovery
http://d-h.st/Lhm
--------------------
Mobileuncle Apk
Playstore https://play.google.com/store/apps/details?id=com.mobileuncle.toolbox&hl=en_GB
Direct DL http://d-h.st/xGU
----------------
MTkDroidTools_v252d supports G18mini
http://d-h.st/AoH
-------------------
Original Firmware
Direct DL http://d-h.st/eQC
(removed Chinese characters)
Thanks zolhaohao90 and ivandy (http://padbbs.zol.com.cn/)
Original DL http://dl.vmall.com/c09bop8j5b
--------------------
meteos-mtk6589-rom-edit-8gb-16gb-en
Direct DL http://d-h.st/IyT
Thanks Meteos (movilesdualsim.com)
-------------------
Other threads which will help you!
How to backup your tablet
http://forum.xda-developers.com/showthread.php?t=2160490
What is CWM
http://forum.xda-developers.com/showthread.php?t=1587607
Hit thanks if it has helped! also Thanks to everyone who has helped me. :laugh:
大神,我的机型和你一样
但是,要命的是我想找中文的原装rom包找不到啊~
links are dead
Hey
Can enyone make new links becouse this one are dead for example :
G18 Mini CWM Recovery
thx a lot
namissan said:
Hey
Can enyone make new links becouse this one are dead for example :
G18 Mini CWM Recovery
thx a lot
Click to expand...
Click to collapse
http://d-h.st/GA8 here you go
can not found SDcard or external card and can not loading said:
to backup to external SD!
Install meteos-mtk6589-rom-edit-8gb-16gb-en APK
Run it and click the 4GB and follow the instructions and reboot into recovery.
Wipe/reset then do an Nandroid restore from external SD
It will show failed to restore SDCARD but don’t worry, boot into the tablet and format/erase internal (Flash storage)
Turn off the tablet then hold volume up and power to boot recovery. Do a full nandroid restore again from external SD…DONE!
You will now have 3.9GB for apps and 9.7GB internal storage!
Click to expand...
Click to collapse
after I followed this step, i cannot enter the os. only can enter the recovery.
but i can not restore from sdcard, external card.
it said that it can not found sdcard nor external card...
can you help me??
thank you
firmware
hi...need firmware for G18 mini (C5B9) to reflash rom...anyone have link to it...link above is broken...
thank
dl the original from teclast keep popping 'incorrect scatter file format'...any solution...
thank
messed up but found the original firmware
Hello guys, I'm new at breaking into Android devices, and it seems I messed up when trying to follow this Guide and Mod.
Somehow I didn't do this step:
-----------
CWM Mod Recovery Guide:
Download the G18mini Recovery and flash with MobileUncle.apk
Place the .img in the root of SD then launch the app and click update recovery. Tablet will then reboot into CWM . Do a full nandroid back up!! You will need it in the future or if you want to partition.
Or Flash with SP Flash tool (can find easily on XDA and included in full firmware DL)
-------------
After root i performed the partition. And whiped data. So it seems that all data is erased, I manage to come to the recovery menu. When i afterwards manually copied the G18mini Recovery.img file to the root of my sd-card, and tried to boot find the update, it says no SD card can be found...
one option it gave was to adb sideload data into the tablet. Tried that, but did not know what data i should sideload into it. It seems it need a file.zip.
Somebody asked for the firmware, i found the original firmware from modecom dot eu -> support -> download -> tablets
I tried also to istall that, but did not succeed. It seems the drivers won't load into my windows 8.1 computer.
Any suggestion how to proceed? Can i get the original firmware installed by using Android SDK Manager? I hope I'll be able to save the tablet...
Did you solve it?
s2mishappy said:
after I followed this step, i cannot enter the os. only can enter the recovery.
but i can not restore from sdcard, external card.
it said that it can not found sdcard nor external card...
can you help me??
thank you
Click to expand...
Click to collapse
Me cannot restore from sdcard either. Does it mean that one should erase sdcard while in recovery mode? I did that, but the externat sd card won't still work.
simme_ said:
Me cannot restore from sdcard either. Does it mean that one should erase sdcard while in recovery mode? I did that, but the externat sd card won't still work.
Click to expand...
Click to collapse
no solution. hope someone can post solution for this. thank you
Still no working link for the g18 min recovery. Could you please update it again?
thank you very much
Main thread + features + install instructions + dev support
http://forum.xda-developers.com/showthread.php?t=2201860
PhilZ Touch is a CWM Advanced Edition that adds all the features you could ever miss in CWM
It is a well proven recovery for many phones
It also adds a full touch interface a completely configurable GUI.
Please give your feedback, what works, and any bug you could encounter
Read the features, and check if you are missing something
Also, do not forget to read about the powerful aroma file manager integration and double tap shortcut.
Install instructions:
1.With fastboot:
Extract philz_touch_*.*.*_armani.img from philz_touch_*.*.*_armani.img.tar
Run fastboot
Code:
fasboot flash recovery philz_touch_*.*.*_armani.img
2.With MiRecovery using flashable zip:
Copy philz_touch_*.*.*_armani.zip in root of internal storage
Rename it to update.zip.
Enter into recovery (volume up + power)
Install update.zip from sdcard.
Reboot.
3.With CWM or TWRP using flashable zip:
Copy philz_touch_*.*.*_armani.zip in root of external sd card
Enter into recovery (volume up + power)
Install zip from sdcard.
Reboot.
Known Issues:
Mount USB Storage don't work.
XDA:DevDB Information
[RECOVERY][ARMANI][RedMi 1S]CWM PhilZ Touch, Tool/Utility for the XIAOMI REDMI 1S
Contributors
juliusssss,Phil3759
Version Information
Status: Stable
Created 2014-08-12
Last Updated 2014-08-12
thank you juliuss, really really awesome work. and phil too. I have been using your TWRP but this is the best. great work.
Thanks... will try it out and give feedback.
Amazing work , used this to install the unofficial CM11 build on my Redmi 1S !!
I am unable to flash zip file with mi recovery. It always gives error no zip found in internal storage.please rename file as update zip and try again. I have already renamed file as update.zip after downloading it.I have zip file in internal storage and external as well. Can anyone help me out?
juliusssss said:
Main thread + features + install instructions + dev support
Click to expand...
Click to collapse
any chance of making Dual Recovery ??
like this 1 that i am using on Xperia Z1
http://forum.xda-developers.com/showthread.php?t=2261606
@juliusssss....Bro just fixed the sdcard mount problem
now sdcard is mounting in recovery mod...
Here is The Link...
Philz Touch
khan_frd2002 said:
@juliusssss....Bro just fixed the sdcard mount problem
now sdcard is mounting in recovery mod...
Here is The Link...
Philz Touch
Click to expand...
Click to collapse
Thanks @khan_frd2002, but it has the same problem, you can mount but only on read-only mode.
Thanks anyway. Greetings.
juliusssss said:
Thanks @khan_frd2002, but it has the same problem, you can mount but only on read-only mode.
Thanks anyway. Greetings.
Click to expand...
Click to collapse
really sorry bro...i just check whether it mount or not
@juliusssss....any new update bro
khan_frd2002 said:
@juliusssss....any new update bro
Click to expand...
Click to collapse
Sorry, now i'm trying to compile a custom recovery for a new device and i don't have time, when i compile this new recovery i update cmw-philz for armani :good::good:
Greetings.
juliusssss said:
Sorry, now i'm trying to compile a custom recovery for a new device and i don't have time, when i compile this new recovery i update cmw-philz for armani :good::good:
Greetings.
Click to expand...
Click to collapse
no problem bro :good:...will wait for you
just one question there is option for wipe to install new rom it will wipe as well sd-card?
sorry for my english
erouz said:
just one question there is option for wipe to install new rom it will wipe as well sd-card?
sorry for my english
Click to expand...
Click to collapse
yes..it will wipe your internal sd-card
ok I know now I was use that option while waiting for reply. I was stuck on mi logo after flash because i was flash rom and speed tweak at one go
but thank you for replay
wats the key combination too boot into this ??
sherry_94 said:
wats the key combination too boot into this ??
Click to expand...
Click to collapse
Volume up + Power key
Sent from my HM 1SW using XDA Premium 4 mobile app
khan_frd2002 said:
yes..it will wipe your internal sd-card
Click to expand...
Click to collapse
U sure selecting the wipe to install new ROM will wipe the internal storage ? Asking as it does not wipe the internal on other phones just formats the system wipes del and cache.
rkkaranrk said:
U sure selecting the wipe to install new ROM will wipe the internal storage ? Asking as it does not wipe the internal on other phones just formats the system wipes del and cache.
Click to expand...
Click to collapse
Yeah. Even I thought it wipes just system and cache
nishanthhh said:
Yeah. Even I thought it wipes just system and cache
Click to expand...
Click to collapse
Thats the reason i asked him coz it does not wipe the internal memory on other phones.
Here is a copy of my pre-rooted backup of the firmware. Thanks to @ausdim for his twz kernel required to fix wifi on the T-Mobile M919 (already built into the backup).
**Closing Thread** Use the following Guide to Install Official I9505 Firmware on T-Mobile M919
I9505XXUHOB8_Stock_Rooted_Backup**New**
I9505XXUHOB7_Stock_Rooted_Backup
Instructions:
1. Extract the Stock_Rooted_Backup folder from the .rar and place that folder into your TWRP backups folder, i.e: ext-sdcard/TWRP/BACKUPS/xxxxxx (The name of your backups folder may vary. If a backups folder does not already exist you must first create a backup using TWRP's "Backup" function before proceeding).
2. From TWRP recovery perform an "Advanced Wipe" and wipe Dalvik, System, Data, and Cache.
3. From the Main Menu press "Restore" and restore the I9505XXUHOB7_Stock_Rooted_Backup .
4. Reboot. Done!
Tip: For blazing fast speed disable animations from Developer Options.
Which Modem and Bootloader are you using with this Official I9505 Rom on T-Mobile M919 device ?
muniz_ri said:
Here is a copy of my pre-rooted backup of the firmware. Thanks to @ausdim for his tw kernel required to fix wifi on the T-Mobile M919 (already built into the backup).
Instructions:
1. Extract the I9505XXUHOB7_Stock_Rooted_Backup folder from the .rar and place that folder into your TWRP backups folder, i.e: ext-sdcard/TWRP/BACKUPS/xxxxxx (The name of your backups folder may vary. If a backups folder does not already exist you must first create a backup using TWRP's "Backup" function before proceeding).
2. From TWRP recovery perform an "Advanced Wipe" and wipe Dalvik, System, Data, and Cache.
3. From the Main Menu press "Restore" and restore the I9505XXUHOB7_Stock_Rooted_Backup .
4. Reboot. Done!
Tip: For blazing fast speed disable animations from Developer Options.
Click to expand...
Click to collapse
Download link is unvailable. Please fix it.
xperia_88 said:
Which Kernel, Modem and Bootloader are you using with this Official I9505 Rom on T-Mobile M919 device ?
Click to expand...
Click to collapse
The kernel used is noted in the OP everything else is stock NK2.
muniz_ri said:
Here is a copy of my pre-rooted backup of the firmware. Thanks to @ausdim for his tw kernel required to fix wifi on the T-Mobile M919 (already built into the backup).
Instructions:
1. Extract the I9505XXUHOB7_Stock_Rooted_Backup folder from the .rar and place that folder into your TWRP backups folder, i.e: ext-sdcard/TWRP/BACKUPS/xxxxxx (The name of your backups folder may vary. If a backups folder does not already exist you must first create a backup using TWRP's "Backup" function before proceeding).
2. From TWRP recovery perform an "Advanced Wipe" and wipe Dalvik, System, Data, and Cache.
3. From the Main Menu press "Restore" and restore the I9505XXUHOB7_Stock_Rooted_Backup .
4. Reboot. Done!
Tip: For blazing fast speed disable animations from Developer Options.
Click to expand...
Click to collapse
I do not see the restore file in TWRP backups, but I do see the backup I ran to back up my current rom. What do I need to do?
williambs said:
I do not see the restore file in TWRP backups, but I do see the backup I ran to back up my current rom. What do I need to do?
Click to expand...
Click to collapse
Which version of TWRP are you using?
I installed your OA7 backup a week and a half ago, but i did'nt got 4G/LTE after booting, only H+, so i came back to KK... is the same with this OB7?
Thanks anyways.
blake2893 said:
I installed your OA7 backup a week and a half ago, but i did'nt got 4G/LTE after booting, only H+, so i came back to KK... is the same with this OB7?
Thanks anyways.
Click to expand...
Click to collapse
As stated in the Title this is for the t-mobile variant. Don't know if it works on yours.
muniz_ri said:
As stated in the Title this is for the t-mobile variant. Don't know if it works on yours.
Click to expand...
Click to collapse
Wow that was fast... thanks....
I have the M919v so I will try and report back later today... :good:
muniz_ri said:
Which version of TWRP are you using?
Click to expand...
Click to collapse
sorry for the delay, TWRP 2.8.4
williambs said:
sorry for the delay, TWRP 2.8.4
Click to expand...
Click to collapse
That version should work, make sure that you extract the backup folder from the .rar archive. Other than that don't know what could be the problem.
Working great on my T-mobile s4!
Thanks a million! My variant is sgh-m919.
Great !
Thanks a lot
Do you know if Reboot menu extended for i9505XXUHOA7 works on this release ?
Great job
Thanks 4 ur great job
but i have a question what is the difference between this ROM and Your other ROM in this thread @[How-To] Install I9505 OA7 Twz 5.0 Leak on T-Mobile M919
is that have some advantages except being official
muniz_ri said:
That version should work, make sure that you extract the backup folder from the .rar archive. Other than that don't know what could be the problem.
Click to expand...
Click to collapse
I will retry thus afternoon. First I will get a fresh download and then extract the folder as mentioned. I am a Tech Administrator and deal with all sorts of files and have rooted umteen times, so I do not know what I could be doing wrong. However, I have made mistakes and will double check my steps and try again.
Thank you for your hard work @Muniz!
williambs said:
sorry for the delay, TWRP 2.8.4
Click to expand...
Click to collapse
The Backup should be copied to this folder TWRP\BACKUPS\0a952bf7\ on your external or internal SD Card. The 0a952bf7 folder name might vary on yours that is why @muniz_ri encourages us to first attempt creating a backup with TWRP and then TWRP will give you the full backup directory so you just extract the backup zip and paste in there.
Nana Ayeh said:
The Backup should be copied to this folder TWRP\BACKUPS\0a952bf7\ on your external or internal SD Card. The 0a952bf7 folder name might vary on yours that is why @muniz_ri encourages us to first attempt creating a backup with TWRP and then TWRP will give you the full backup directory so you just extract the backup zip and paste in there.
Click to expand...
Click to collapse
I always backup
Thanks for the additional information my friend!
I will follow and try :highfive:
edzamber said:
Great !
Thanks a lot
Do you know if Reboot menu extended for i9505XXUHOA7 works on this release ?
Click to expand...
Click to collapse
No. It does not have extended reboot menu.
I dont get it, I was in TWRP recovery mode while copying the whole folder but it seems I cannot copy it.
So I did was TWRP/BACKUPS/09xxxxx/(another folder 2015 - xx xx) and replace the files there.
Restore successful - Reboot - stuck.
HamburgerxDDD said:
I dont get it, I was in TWRP recovery mode while copying the whole folder but it seems I cannot copy it.
So I did was TWRP/BACKUPS/09xxxxx/(another folder 2015 - xx xx) and replace the files there.
Restore successful - Reboot - stuck.
Click to expand...
Click to collapse
Revisit the OP instructions. From TWRP recovery perform an "Advanced Wipe" and wipe Dalvik, System, Data, and Cache. In that case you should not be stuck. Mind you, it also takes a while for the very first boot.