So I was using the face unlock (which works amazing) and when I rebooted my phone, as usual it re-enabled the "fingerprint sensor can lock phone" option. But it also made all my smart Lock options disappear. Very wierd.
Same
Yea same, I have the Moto z2 force on Sprint with Android 7.1.1 . Every time I restart or boot up the phone the Smart Lock buttons don't work or show up. I factory reset the phone and did nothing but removed all of my stuff. Maybe when Android 8 or Oreo comes out it will be fixed. I hope it will fix it because I use it a lot. If you don't know how to update your phone you first go to Settings, then About phone, then System updates.
I had this problem but once I made a factory reset last week it is working normally, at least until now. One way to temporarily fix it is by deactivating smart lock in the secure agent section, reboot and activate again. The downside is that everytime you reboot without deactivating it as a secure agent it will stop working again.
DTHayakawa said:
I had this problem but once I made a factory reset last week it is working normally, at least until now. One way to temporarily fix it is by deactivating smart lock in the secure agent section, reboot and activate again. The downside is that everytime you reboot without deactivating it as a secure agent it will stop working again.
Click to expand...
Click to collapse
That worked thank you!
Related
Just recieved OTA update on my stock gnex using the google-framework cache clear/close process method.
I cleared cache of google-framework process and then stopped it, rebooted the device and after reboot was done i got the OTA, installed it and phone booted again. update was installed without any problems.
BUT: when going into settings => location access => and then tapping "access to my location" settings force closes.
i rebooted the phone a few times and tried everything that came into my mind, no solution
anybody got the same problem or maybe even a solution?
gaga111 said:
Just recieved OTA update on my stock gnex using the google-framework cache clear/close process method.
I cleared cache of google-framework process and then stopped it, rebooted the device and after reboot was done i got the OTA, installed it and phone booted again. update was installed without any problems.
BUT: when going into settings => location access => and then tapping "access to my location" settings force closes.
i rebooted the phone a few times and tried everything that came into my mind, no solution
anybody got the same problem or maybe even a solution?
Click to expand...
Click to collapse
No problems for me. Ive just got 4.1.2
Anbody else :S
Just to be clear.. i dont mean switching it on and off
Sent from my Galaxy Nexus using xda app-developers app
edit:
seems like light flow is causing the force close...
as soon as i deactivate lightflow from the accessibility settings this doesnt happen anymore
gaga111 said:
Anbody else :S
as soon as i deactivate lightflow from the accessibility settings this doesnt happen anymore
Click to expand...
Click to collapse
Same problem here and that fixes it for me too! Happens on my wife's Nexus 7 too, but she has NoLED there so this may be a bug that has to do with anything enabled under accessibility settings (or at least not ONLY Light Flow).
Edit: I wonder if this is related:
http://forum.swype.com/showthread.p...Swype-Issue-Thread&p=35850&posted=1#post35850
"Note: We have found that this issue is related to running apps that have settings in the accessibility menu in Android settings. In the meantime, you should be able to use Swype by disabling any apps that are in Android Settings > Accessibility."
Sounds like 4.1.2 has some kind of Accessibility bug,
I rooted this tablet using the Kingroot method. Removed all the tmobile bloatware from it to try to speed it up.
The tablet started to get errors and when i click on settings a message shows up that settings has stopped.
I did a hard factory reset to the tablet and now it is not usable when it turns on it keeps getting the popup that settings has stopped and cannot bypass this.
Does anyone know how i can flash a full stock image on this tablet?, or is they a way i can bypass the settings has stopped error, i guess for the first run settings need to run before you can get to Home
if i can bypass the setup i should be able to use the tablet.
Thank you.
jtim209 said:
I rooted this tablet using the Kingroot method. Removed all the tmobile bloatware from it to try to speed it up.
The tablet started to get errors and when i click on settings a message shows up that settings has stopped.
I did a hard factory reset to the tablet and now it is not usable when it turns on it keeps getting the popup that settings has stopped and cannot bypass this.
Does anyone know how i can flash a full stock image on this tablet?, or is they a way i can bypass the settings has stopped error, i guess for the first run settings need to run before you can get to Home
if i can bypass the setup i should be able to use the tablet.
Thank you.
Click to expand...
Click to collapse
Seems you're SOL until LG comes up with an update file.
I only froze bloat with TiBu. Wont remove anything until we get a recovery or ROM.
Put your IMEI on the end of this URL. http://csmg.lgmobile.com:9002/csmg/b2c/client/auth_model_check2.jsp?esn=
PM me if it says you have a file available
If/when that happens I'd be happy to assist you with reflashing the device with the stock rom
Hi I just received my lg g4 yesterday and I installed all of the updates last night from Verizon and lg so everything's up to date but whenever I go to settings and try to change my lock settings it crashes saying unfortunately the process android.com.lockscreen has stopped or something like that and if I try and go to security it says the same thing but security instead of lockscreen in the error. I can't search settings because it'll crash I've tried to clear the cache and force close settings and settings storage but that doesn't work i don't have a Verizon SIM card in it if that matters I don't have any SIM card in it. Any suggestions?
Reset your phone
Spookymyo said:
Reset your phone
Click to expand...
Click to collapse
Did that I restored it cleared cache I even hooked it up to Verizon assistant and reinstalled the firmware update still got the same problem but I just sent it back to get a new one
Hey,
i have some problems with my device (Exynos)
Bixby and Google Assistant stopped working.
I can ask bixby to turn on flashlight, but as soon as i ask something like the weather it just crash.
Google Assistant stopped working completly, i can open it, but it just dissapear und closes.
Further i can use apps like tiktok, but when i switch to another app and back, it hangs and just crash.
if i press restart phone, it shuts down but wont boot until i hold power
other things seem to be working fine
i havent changed anything.
As ive got a lot of apps and data i want to make sure i try everything before i reset my phone (and want to make sure the problem wont persist after reset)
thanks
I think it's because of a wrong update of Android System WebView, so probably you won't be able to solve the problem by resetting your phone
Fronnie said:
I think it's because of a wrong update of Android System WebView, so probably you won't be able to solve the problem by resetting your phone
Click to expand...
Click to collapse
Damn, you seem to be right.
i just deactivated it and except tiktok everything started to respond again (buts not working as i blocked webview haha)
so what i have to do now? no solution but waiting for a new version?
Yep, you have to wait for a new version. Where I live they just released wath seems to be a fix update
Fronnie said:
Yep, you have to wait for a new version, where I live they just released wath seems to be a fix update
Click to expand...
Click to collapse
i hope im getting it.
i uninstalled all updates for webview via settings.
now everything is working.
big thanks, i were really close to resett everything
I rooted my Pixel XL last year and everything was working fine until recently. The Pixel connected to my wifi but couldn't get internet access, even though it had an IP address. I was able to verify connectivity using ADB but I needed internet to work normally, so I decided to reset my phone. I used TWRP and did a wipe with the default settings. The phone booted back up like it was a brand new phone but now when I try to enter the Developer Settings menu, I get a notification saying "Settings has stopped. Open app again". I've tried wiping multiple times, clearing the cache for the settings but nothing works. Anybody have any tips on how I can fix this?
forgot to mention I'm using stock android 8.1, and magisk for root...
fwiw, I flashed a new ROM (lineage 17) and the problem went away.