Hi all just found this At Kogan.com.au
>> Kogan.com/au/buy/39-agora-smart-led-tv-full-hd-usb-input-pvr-digital-tuner-presale-special <<
Android ics, PVR, 1080p and a good list of playback formats as well.
CPU=Cortex A9 1.0GHz
GPU=Mali400
RAM=512MB
RAM Type=DDR2
Internal Storage= 4Gb
Wonder what could be done as far as. customisation, Root, Roms (unlikely) but would be cool.
What do you guys think how could you see customisation on a tv like this? or what rom would you have if you could choose?
and could modding on these type of devices catch on?
Thank you for your time
Roo79x
I managed to root mine, it wasn't difficult.
The Android board seems to be one designed for a settop box (as you would expect), but has modifications to make it suitable for running from within a TV rather than as a separate unit.
The hardware appears to be made by CVT Electronics in China. I don't see any settop boxes available through them that have similar hardware, so I would expect that they have been built for this purpose, but CVT are leaving themselves (left themselves) open to using is as a standalone box motherboard, but have been modified for this use in a Kogan TV by some third party.
The busybox installed in their ROM is a custom version in /system/xbin If you root it, don't replace the busybox. It's likely no standard builds will have the feature set required by this ROM.
The specs look like a regular f16ref board, but I would prefer to be certain before attempting to install a f16ref ROM.
Also, it seems that there should be a remote control config file in /system/etc that should be copied beforehand so it can be reinstalled on a replacement ROM - I have not checked on this.
More soon.
roo79x said:
Hi all just found this At Kogan.com.au
>> Kogan.com/au/buy/39-agora-smart-led-tv-full-hd-usb-input-pvr-digital-tuner-presale-special <<
Android ics, PVR, 1080p and a good list of playback formats as well.
CPU=Cortex A9 1.0GHz
GPU=Mali400
RAM=512MB
RAM Type=DDR2
Internal Storage= 4Gb
Wonder what could be done as far as. customisation, Root, Roms (unlikely) but would be cool.
What do you guys think how could you see customisation on a tv like this? or what rom would you have if you could choose?
and could modding on these type of devices catch on?
Thank you for your time
Roo79x
Click to expand...
Click to collapse
I will be buying the new 55 inch TV from Kogan running 4.2. I hope I will be able to find some way of rooting. Apart from it being a TV which is cool, it will allow me to everything I do on my android phone on my 55 inch TV. How awesome is that! Plus Kogan have an AWESOME wireless keyboard thingy majiggy for $40 which I am so getting...
Root method need
I need help with rooting similar kind of kogan tv( 42 inch smart android 3d led tv) link below
kogan(dot)com/au/buy/42-agora-smart-3d-led-tv-full-hd/
roo79x said:
Hi all just found this At Kogan.com.au
>> Kogan.com/au/buy/39-agora-smart-led-tv-full-hd-usb-input-pvr-digital-tuner-presale-special <<
Android ics, PVR, 1080p and a good list of playback formats as well.
CPU=Cortex A9 1.0GHz
GPU=Mali400
RAM=512MB
RAM Type=DDR2
Internal Storage= 4Gb
Wonder what could be done as far as. customisation, Root, Roms (unlikely) but would be cool.
What do you guys think how could you see customisation on a tv like this? or what rom would you have if you could choose?
and could modding on these type of devices catch on?
Thank you for your time
Roo79x
Click to expand...
Click to collapse
Rooting info for Kogan SmartTV
Octothorn said:
I managed to root mine, it wasn't difficult.
The Android board seems to be one designed for a settop box (as you would expect), but has modifications to make it suitable for running from within a TV rather than as a separate unit.
The hardware appears to be made by CVT Electronics in China. I don't see any settop boxes available through them that have similar hardware, so I would expect that they have been built for this purpose, but CVT are leaving themselves (left themselves) open to using is as a standalone box motherboard, but have been modified for this use in a Kogan TV by some third party.
The busybox installed in their ROM is a custom version in /system/xbin If you root it, don't replace the busybox. It's likely no standard builds will have the feature set required by this ROM.
The specs look like a regular f16ref board, but I would prefer to be certain before attempting to install a f16ref ROM.
Also, it seems that there should be a remote control config file in /system/etc that should be copied beforehand so it can be reinstalled on a replacement ROM - I have not checked on this.
More soon.
Click to expand...
Click to collapse
Octohorn, I would love to hear more information on how you rooted you Agora and also any more information about the hardware (CVT?), please share your findings with us!
Please share
aznphatb0i said:
Octohorn, I would love to hear more information on how you rooted you Agora and also any more information about the hardware (CVT?), please share your findings with us!
Click to expand...
Click to collapse
Yes octohorn. Please help us. I want to change the startup logo on my smart tv. It's version 4.2.1
any update to rooting Kogan 'Smart -tv's"
hirani89 said:
Yes octohorn. Please help us. I want to change the startup logo on my smart tv. It's version 4.2.1
Click to expand...
Click to collapse
DITTO - anyone have further process/luck/info on rooting and modding the Kogan Smart TV's?
(FYI - the current 2014 July 42" seems to be the same as a Teac Smart 42")
i managed to run a launcher changer - but it wasnt TV based and couldnt do much....
I'm not that switched on for Android hacking i'm afraid....
I have accidentally bricked my 32" kogan tv when trying to root it. Any suggestions as to what can be tried?
HuiFei - 2 DIN Pure Android 4.2.2/4.4.2/4.4.4 RK3066/RK3188 Car Stereo Radio Head Unit. KGL/KLD/RM/GS/JY/MD/KYD/BN/HA [ROOTED]
Moderation Announcement (added by @dark alex)
dark alex said:
Hi together this is an important announcement!
As you knew Mike an me we were talking about a dedicated section.
This is now achieved and I am requested by him to sort things out from here.
I will split out some Key knowledge posts, for example malaysks Firmware-Post, to new Threads in our subforums.
Developers
Please if you create new work open you own Thread in the new forums. If you already have posted here probably wait until I split your post out or write to me to ensure I will split you out if you think I missed you or you have a critical release.
Questionning Users
Please open your own thread for your questions in our new section. I can not split out every question from here. This thread will be left over for searching so please if you have current questions just ask in our new Q&A-Section.
I will start splitting up this thread in about one hour.
You can find the new section at the bottom of this link:
http://forum.xda-developers.com/android-auto
Thank you!
Click to expand...
Click to collapse
This is a new thread for this car dvd that was first reported on comment #2224 of the AN-21 U thread.
Probably you are here because:
you want to root your unit. Only units with ROMs 4.2.2 can be rooted (see below how). The only way to have a rooted 4.4.x is installing a pre-rooted ROM (see below how)
you have a problem (no internet, no sound, buttons do not work, bad mic quality, rear camera image not showing, door opening not showing, etc.
you want to upgrade your unit to a newer software that has sleep mode, personalized music app, personalized functions, root, xposed, can remap buttons, etc.
All this is covered in this post and most of the problems that you can have are summarized in this post too. Please read this first post before asking. And use the search function of the thread, before asking. Thanks.
TRICKS THAT MIGHT SAVE 1000 QUESTIONS ON THE THREAD
Read below and here for basic questions asked and answered 1000 times.
How to root my unit. Only 4.2.2 can be rooted with an app (see below). To have rooted 4.4x you must install a pre-rooted ROM (see below)
Get sound when in reverse (thanx to @Keylo Lo)
here
Engineering/Factory settings password "126" (thanx to @blankers)
This allows you to change logo, sound volume, SWC codification, etc.
Activate USB debugging --> Go to Factory Settings and enter password "adbon".
System sound is low compared to Radio--> Go to Factory settings and change volume levels
GPS button does not trigger GPS app You need to choose predefined GPS app, in Settings--> GPS
Get Into Recovery
1 Press reset button and power button together
2 After about 5 secs release reset button, but keep pressing power button
3 When booting screen appears release power button.
4 It boots into recovery.
--Update 1-- some units without front USB have a different procedure
Firstly power on the unit and then long press the power button and then reset. Then the unit will get three rings and you loose your hand on the power button and short press the power button again. (thanx @netay)
--Update 2-- some others have this procedure (thanx @R4D3N)
1. Turn off the unit by holding 3-4 sec the power button.
2. Hold the RESET button + POWER button for 5 sec
3. Release the RESET button and keep pressing the POWER button for 2 sec
4. Release the POWER button and wait. The Recovery menu appears.
5. With the Volume knob you can move up/down and long press on Volume/Power button to select the option.
Get Into Bootloader
The process is basically the same, with the difference that you need to have the computer attached to the unit via the front miniUSB (if you do not have a front USB, you will have to ask your seller how to get into bootloader mode)
1- boot the unit as usual.
2- plug the front usb of the unit to your computer usb.
3- Then, push the reset button and the power button at once and keep them pushed. The reset button is the tiny pin next to the mp3 sdcard. The power button is the volume knob. You will hear the power cut throught the speakers.
4- Release reset button and keep power button pushed. Now the unit will reboot. You will see nothing, just a black screen. Do not release the power button yet. Your computer will detect a " new hardware", that is the RolckChip. When you hear the windows noise of new detected hardware, you can release power button. It will automatically install the drivers.
------------------------------------------------------------------------------------------------------------
HOW TO UPGRADE YOUR SYSTEM
BEFORE UPGRADING YOUR UNIT YOU MUST KNOW
MCU your unit, there are many (KGL, KGL1, KGL2, KGL3, KGL4, KGL5, KLD, KLD1, KLD2, JY, GS, KYD, MD, BN, HA, MX), If you install the wrong MCU, you will brick your unit.
To know which one you have. Go to Settings -->About
If still not clear, see: here or here.
If you cannot find it here, it probably means that you are in the wrong thread.
Resolution of your unit. 800x480 or 1024x600. If you install the wrong ROM, you will brick your unit.
Chip of your unit RK3066 or RK3188. It does not really matter, ROMs and MCU are compatible between chips.
IT IS ADVISABLE TO BACKUP YOUR SYSTEM BEFORE PLAYING WITH IT
Upgrading is supposed to be a safe operation, but you never know what can happen. So, before updating make sure that:
1- To backup of your system the easiest way is download nandroid root from google play, and do a nandroid backup with TWRP format). Save it in your external SD.
2- make sure you can enter in bootloader mode (see below how to)
3- it is recommended to backup your apps and data (use titanium from google play). The update will do a factory reset.
FOLLOW THIS TO UPGRADE YOUR ROM AND/OR MCU
0- Do a back up (copy the files somewhere safe) of your internal SD card memory. It will be wiped during the process.
1- Download the ROM (Resolution 1024x600 or 800x480) and MCU (KGL, KLD, JY, GS,RM, MX, BN, HA) for your unit.
ROMs--> repository This will get you a file named update.img. There are different "flavors" of ROMs.
Code:
- [user=853627]@coudu[/user] (rooted, stock). Early v4.0 and v4.1 have some problems.
- [user=3590033]@Malaysk[/user] (rooted, with very useful mods, some come with NEXT launcher)
- [user=6041319]@dsa8310[/user] (rooted, almost stock)
MCUs--> Latest MCUs by Malaysk are here . This will get you a file named mcu.img
2- copy the update.img you have chosen to the root of your GPS card.
3- copy the mcu.img for your specific unit to the root of your GPS card (if you do not want to update mcu.img, you can skip this step)
4- insert back the GPS card to the unit. If no window pops up, reboot the unit. At boot, the presence of update.img will be detected and a pop up window will ask you whether you want to update your unit. It will automatically reboot into recovery mode and update your unit. Once done, remove update.img and mcu.img from the root of the gps card or you will be asked every boot for an update.
5- In some Coudu´s (sd partition of 3Gb) and Malaysk´s ROMs versions, it is necessary to do a factory reset just after the first boot so that everything works properly.
6- If you lost buttons or radio after the upgrade --> Go to Factory settings (password 126) and choose the proper canbus for your car and the radio chipset. You can change boot logo if you want.
* If you get Google services error after upgrading to KitKat see this and this
------------------------------------------------------------------------------------------------------------------
THINGS YOU MAY WONDER BEFORE BUYING A HEADUNIT
Code:
[B]- Boot Up:[/B]: time is around 30s.
[B]- GPS[/B]: GPS positions very fast. TomTom, Navigon, Sygic, and regular off-line GPS work. Navigon and Sygic have some problems with some ROMs
[B]- Stand by mode[/B]: Latest ROMs and MCU have the possibility of choosing stand by mode with various times chosen.
[B]- Radio:[/B] radio stations are saved as frequencies
[B]- Bluetooth contacts:[/B] contacts are saved on the device.
- Works fine with Bose system (Audi)
- Possible ground loop noise that needs some tricks to be removed (see section problems)
- Torque works and can run in parallel with A2DP
- ELM327 works (might need special app like CarService in very weird cases)
- Camera works (might be better to get the one with RK3188 chip)
- There is no automatic brightness control because the unit does not have light sensor, but there are apps that can help
- The touch screen is extremely responsive. It works as good as most phones.
-------------------------------------------------------------------------------------------------------------------
HOW TO ROOT AND INSTALL TWRP
Instructions to get root (thanx to @webdude12)
It only works for Android 4.2.2. If you want to root 4.4.x you need to take apart update.img and inject SuperUser app (this is only for experts as @coudu, @Malaysk, @dsa8310 ). The alternative is to install a 4.4.x pre-rooted image and you do not have to do anything else. See below in HOW TO UPGRADE YOUR UNIT section how to do it.
If you want to root your 4.2.2, download Root Master 2.1.1 here
Code:
1- Install the APK.
2- Make sure you are connected to WiFi and you have an internet connection.
3- Open Root Master (do not upgrade to newer version unless you can read chinese, The newest version has different options, all in chinese. Version 2.1.1 just has a button that says "root".))
4- Press root button
5- Chinese characters will flash across the screen.
6- A second popup box will appear, press the purple button.
The app will automatically install SuperUser.
This program connects to servers oversea sending hardware information. The downloads a script that will attempt to root the device. If the first script fails, it downloads additional ones. Future goal is monitor this communication with a data logger and find which script works, so that a unique program can be written to achieve root.------------------------------------------------------------------------------------------------------------------
How to install TWRP recovery (thanx to Abdul_pt from Freaktab and 1-2-Hak and coudu)
You do not really need to install TWRP unless you wanna mod the rom yourself, if you mod roms you will know that already.
- a.t.m. you need a mouse to use TWRP because touch is not working yet
- if you install TWRP, you will not be able to update the update.img and mcu.img the way it was explained above.
If you still want to install TWRP:
Android 4.2.2 800x480
Download files here
And follow the post by 1-2-Hak
Android 4.4.2 800x480
Follow this: this
TWRP for 1024x600
See this post------------------------------------------------------------------------------------------------------------------
TRICKS AND MODDED APPS THAT DO WONDERS
Install app without adb when regular install does not work
Sometimes the app won't install normally and you need to sideload it.. This means that you need a computer and adb wifi. There is another way with which you won't need a computer. You just need to install a terminal emulator (you need root ).
1- Download the terminal emulator app you prefer
2- Download the app you want to install to /mnt/sdcard
3- Open terminal emulator
4- On the terminal navigate to /mnt/sdcard by typing
Code:
- cd /mnt/sdcard
- su
- pm install "NameOfTheApp".apk
Done, you are app is now installed.
Modified Radio Apps
To install radios you need to copy the app using ESExplorer or Root Explorer straight to /system/app in place of MTCRadio.apk
Radio version 4.2.2 800x480
Blue theme (thanx @1-2-Hak)
Rally style Buttons have been moved and skin changed for a Rally like one.
Forest style. Colors have been changed and frequency name is in big.
Radio version 4.4.4 800x480
Blue tint. Stock radio with big names and all in blue shades.
Red tint
Radio version 4.4.4 (Malaysk v1, aka alive)
1024x600. Has animation, in blue tones
[*]Car Service. Allows to use SWC and buttons with 3rd party apps (Latest Malysk ROMs already include it).
Download here (thanx @@KeiserSozeyFr)
If it does not install, copy directly to /system/app
[*]Microntek HeadUnit Service Latest Malaysk ROMs include it. It allows to use SWC with non native apps. It allows to make calls and send messages from Android part of HU, and to show toasts. You can find it straight on Google Play.
There is a modified version (probably outdated) with early start of services here
[*]Moded Music app. Two versions. One is the original with expanded list, so full names can be seen, and the other one has the list integrated in the background so it is always visible.
http://forum.xda-developers.com/showpost.php?p=53352994&postcount=894 (thanx to @dark alex)
anoher one here
[*]Set Loud Latest ROMs do no need it.
Method 1:
Just install this app: http://forum.xda-developers.com/showpost.php?p=53463910&postcount=963 (thanx to @dark alex)Method 2:
You need Tasker or Automagic or similar app.
Set up a task that runs at boot with the following code as "shell command"
am broadcast -a com.microntek.irkeyDown --ei keyCode 44
How to: http://forum.xda-developers.com/showpost.php?p=53553617&postcount=1058
[*]Speed-sincronized volume increase (AKA GALA)
This app will modify the volume of your unit according to the speed. The amount sensitivity can be adjusted.
http://forum.xda-developers.com/showpost.php?p=53441283&postcount=931 (thanx to @dark alex)
[*]PowerAmp Toast (thanx @agentdr8)
This app will show title/album/album art when tracks change while PowerAmp is in background.
http://forum.xda-developers.com/showpost.php?p=53964813&postcount=1461
[*]Rear Camera without icons (icons were included in the KitKat version 4.4.2) (thanx @typos1 and 4pda.ru guys)
http://forum.xda-developers.com/showpost.php?p=56888840&postcount=5096
[*] KLD Launcher 4.4.2 with bigger date
Launcher see picture
---------------------------------------------------------------------------------------------------------
FILE REPOSITORY, FIRMWARES and MCUs for KGL/KLD/GS/RM/JY/MD
Repository (everything is here, firmware up to date, mcus not so much)
More updated MCUs from @Malaysk & @darkleo --> here
Some of the firmwares are... (list not updated)
Custom KitKat 4.4.2 by 4pad.ru (RK3066)
Coudu's 4.4.4 v4.2 (RK3066) (January 2015 release), see here
- Coudu v4.0 and v4.1 have some problems. v4.2 is good (specially releases 150113 for KLD and 150113 for KGL). You might need MTCControlSettings.apk as in these latest releases coudu removed it.
Malaysk's roms (RK3066) w/ and w/o NEXT launcher, also 4.4.4 here
JY Android version is this one
Malaysk's roms (RK3066) version 24/05/15 Download here. It allows the remapping of the radio buttons.
dsa8310 JY rooted ROM 150513 (RK3188) Download here
-------------------------------------------------------------------------------------------------------------------------------
WIKI-Page
Basic info on everything
Another wiki with general info here-------------------------------------------------------------------------------------------------------------------------------
PROBLEMS AND SOLUTIONS FOUND BY THE USERS
Unfortunately the first issues with the promising unit arrived.
@webdude12 got a black screen while driving due to a broken clip (see attachment to figure out which one). One solution is to glue the clip so that it does not get loose. Not doing that can end up in major problems.
Unit might not boot on very hot conditions as it has a thermostate to avoid possible problems. It will work normally when cooled down.
Some apps do not show completely in the screen due to the low resolution.
However, there's a great solutions for that:
- you need root
- install xposed framework (google it)
- probably you need to sideload the apk with ADB as the unit refuses to install it normally.
- install "app settings" module in xposed framework (you can change dpi for individual apps and make them fit in the screen)
When add a google account, it doesn't show under accounts
fix --> http://forum.xda-developers.com/showpost.php?p=53809274&postcount=1303
Wifi or buttons do not work after update to 1.86 or 1.99 firmware versions
- This happens because the MCU or kernel of the new version is not adequate for your unit. Luckily MCUs and kernels are mixable for the same unit.
fix --> Install newest firmware with an older MCU in the usual way. Then install the kernel of a version you know used to work.
To install kernel alone --> Here and files needed here.
Kernel install for doomies (with pics): here
No radio reception
fix --> your ground cable might be loose Sold it back. see this and this and this.
SD card unexpectedly removed // USB unexpectedly removed
fix --> Thanx to @ R4D3N here
Mic sound is awful
-- WARNING --
For any unit, before removing the capacitor with the purpose of separating the BT card from the internal mic, you must make sure (with a multimeter) that the capacitor to be cut interconnects the MIC entry of the BT card with the internal mic. Please note that the capacitor is on the motherboard in the immediate vicinity of the (vertical) BT card (pics on fix for JY units can help you)
fix for JY units --> http://forum.xda-developers.com/showpost.php?p=57982083&postcount=7036
fix for KGL units --> http://forum.xda-developers.com/showpost.php?p=55775852&postcount=3982 and http://forum.xda-developers.com/showpost.php?p=55769511&postcount=3964
fix for KLD units --> http://forum.xda-developers.com/showpost.php?p=56529110&postcount=4592
Bluetooth modules not pairing
fix --> http://forum.xda-developers.com/showpost.php?p=56450438&postcount=4544
Google service error after upgrading to KitKat 4.4.2
fix --> http://forum.xda-developers.com/showpost.php?p=56791126&postcount=4866
and --> http://forum.xda-developers.com/showpost.php?p=56793317&postcount=4925
Wrong door being shown open. Only VW and KitKat 4.4.2
fix --> Go to factory settings, change "Rude"
TomTom not working on KK 4.4.*
fix --> http://forum.xda-developers.com/showpost.php?p=56991862&postcount=5336
--WARNING-- if you installed chainfire SuperSU you have to slightly modify install-recovery.sh. You must substitute /system/xbin/su --daemon & --> /system/xbin/daemonsu --auto-daemon &
TomTom bundle: use maps stored on external SD// Update TomTom maps with map share free// Early start of softwares// SWC from boot/install-recovery.sh
see --> this (thanx to @dsa8310 WARNING: see post #10440 and comments therein when using install-recovery.sh)
summary of early start services commands --> here
Sygic not installing
see --> http://forum.xda-developers.com/showpost.php?p=58983985&postcount=9020
3G USB Dongle not working properly
Probably is due to the USB is underpowered. Use a (externally) powered USB hub. Or follow this how to to power the USBs of your unit.
how to --> http://forum.xda-developers.com/showpost.php?p=58949495&postcount=8949
short version-->http://forum.xda-developers.com/showpost.php?p=58970437&postcount=8983
the following 2-3 pages contain comments about that mod worth reading.
see --> http://forum.xda-developers.com/showpost.php?p=58249825&postcount=7614
Another how to for external powered USB hub--> http://forum.xda-developers.com/showpost.php?p=58979534&postcount=9011
3G connection lost after some drive
see --> http://forum.xda-developers.com/showpost.php?p=58539736&postcount=8162
and --> http://forum.xda-developers.com/showpost.php?p=58982926&postcount=9017
DVR camera not recording or stopping - DailyRoads Voyager app
see --> http://forum.xda-developers.com/showpost.php?p=58648519&postcount=8383
also --> http://forum.xda-developers.com/showpost.php?p=58977534&postcount=9007
Viper4Android not working properly
Check this and look for Viper4Android config here
When I try to install an app, I cannot tap the "install" button
This happens because you are using a screen dimmer. It is a protection function. Just temporarily disable screen dimmer app and you will be able to install the app.
Radio does not show proper pty
Download this modified version (it is v 4.2.2) of RadioMTC
Start apps while booting, you need install-recovery.sh script (included in latest Malaysk ROM)
Read this post to understand how it works. If PowerAmp is auto starting at everyboot, see this
Improve Radio quality by replacing hardware parts. Thanks to 4pda.ru
see --> http://forum.xda-developers.com/showpost.php?p=60895894&postcount=12932
and http://forum.xda-developers.com/showpost.php?p=60896400&postcount=12936
Remap radio buttons. Thanks to 4pda.ru and agentdr8
see -->http://forum.xda-developers.com/showpost.php?p=60941619&postcount=13030
Upgrade RK3066 to RK3188 (needs hardware replacement)
see --> http://forum.xda-developers.com/showpost.php?p=60972222&postcount=13086
or this --> http://forum.xda-developers.com/showpost.php?p=62832292&postcount=18752
Replace damaged touch screen
tutorial --> http://forum.xda-developers.com/showpost.php?p=62832292&postcount=18752
There's another video here (also in chinese) showing a 4.2 unit. It may be the same one. Hard to tell, though....
http://www.youtube.com/watch?v=Ggecy9tTKYg
Here is the official manufacturer product page for the RK3066.
Process • 40nm low power process
CPU • Dual-core ARM Cortex-A9, up to 1.6GHz
GPU • Mali-400MP4 Quad-core GPU, up to 400MHz
Graphic Computing
High performance dedicated 2D processor
1080P multi format video decoding (H.265 and VP9)
1080P video encoding for H.264 and VP8
Stereoscopic 3D H.264 MVC video Codec
Flash • Support MLC NAND, eMMC
Memory • Full memory support, DDR3, DDR3L, LPDDR2
Display • Support dual-panel display, max for 2048x1536 resolution
Camera • Support dual camera
Connectivity • Rich peripheral and connectivity
This one seems to be from an dutch ethusists webiste RK3066 info.
2 sofas, 8bits/16bits Nor Flash / SRAM interface
8 banks, 8bits/16bits Async Nand Flash, LBA Nand Flash and ONFI Nand Flash Sync 8bits to 60bits hardware ECC
2GB total memory space for two beds, 16bits/32bits DDR3-800, LPDDR2-800, LVDDR3-800
Total 3 channel SD / MMC interface MMC4.41, SD3.0 and SDIO3.0 (eMMC) support
2 Channels TFT LCD interface with 5 layers (layers) and 3D display, 1920 × 1080 maximum display size (resolution)
Tx HDMI interface version 1.4 with 3D video support 1080p @ 30Hz 2 channels, 8bits CCIR656 interface and 10bits/12bits raw data interface with image coprocessor
Many audio interfaces including 2x 2channel I2S/PCM + 1x 8k channels I2S/PCM tx + SPDIF (optical digital)
1x USB OTG 2.0 and 1x USB 2.0 Host
10/100Mb network RMII interface
High Speed ADC interface TS stream interface
Various interfaces peripheral worth under I2C 5x, 4x UART, SPI 2x, 4x PWM
ARMv7 Architecture
1.6GHz clock frequency (safely overclockable to 1.8GHz provided adequate cooling)
Mali400 Quad-Core GPU @ 250MHz
Advanced SIMD which is better known as NEON or MPE (Media Processing Engine). The NEON processor is a combination of 64 - and 128-bit SIMD (single instruction multiple data) engine to accelerate media.
And of course the adb drivers and other drivers.
I will have my unit Friday. Cant wait to start playing with the rest of you.
webdude12 said:
I will have my unit Friday. Cant wait to start playing with the rest of you.
Click to expand...
Click to collapse
I don't think anyone has this unit yet...you could be the first !
Mine has also shipped but I don't have a tracking number yet, so don't know where it is, or when it will arrive.
If yours arrives before mine I will be interested to see your review......
Being in the car stereo industry for years and only ever owning Alpine radio's, it took a leap of faith for me to order this, but since I was able to put it on business AMX, that offers me 100% buyer protection, I decided why not.
Since it will only take about 10 mins to install in my A4, sure I will do the second I get it. But will try to do a little unboxing video too
webdude12 said:
Being in the car stereo industry for years and only ever owning Alpine radio's, it took a leap of faith for me to order this, but since I was able to put it on business AMX, that offers me 100% buyer protection, I decided why not.
Since it will only take about 10 mins to install in my A4, sure I will do the second I get it. But will try to do a little unboxing video too
Click to expand...
Click to collapse
Nice !
I am really looking forward to it. I am about to order a unit for myself and I would appreciate if, when you receive it, you could share your experiences on:
- boot time
- sound quality from radio and SD card files. Also radio reception.
- gps response and use
- screen brightness on direct sun
- bluetooth utilities, A2DP, micro and call quality,
- internet surfing experience in general and for streaming like spotify, pandora, ... etc
I will update the first post with all the info that you provide.
Nice
Warning !
I was doing a transaction with the seller for an universal 2 DIN UNIT
and i just learn that there is 1 month delay because android 4.2.2 motherborad are not available at this time.
they need to re-stock. :crying:
I hope the model you wish will be in stock ^^
Regards.
m0gs said:
Warning !
I was doing a transaction with the seller for an universal 2 DIN UNIT
and i just learn that there is 1 month delay because android 4.2.2 motherborad are not available at this time.
they need to re-stock. :crying:
I hope the model you wish will be in stock ^^
Regards.
Click to expand...
Click to collapse
Which seller have you been dealing with ?
I've just received the tracking number for my shipment.....
Here is the seller I ordered from:
http://www.aliexpress.com/item/2014...acitive-Screen-Car-DVD-player/1662316562.html
Like I said I got it for $490 shipped to the US. Remember, I know that sounds high compared to the $260 + s/h, but I am getting all the pieces and parts that make it intergrate into the rest of Audi (i.e. CAN-BUS, so the remote display between my speedometer and tachometer still shows radio info, direct steering wheel controls, etc)..
The seller has confirmed its the same unit as mentioned in the first post.
I should be able to comment on all items except screen in direct sun. My windows are tinted with 15% window tint on the side, and 50% tint on the windshield. I will try to roll down the windows and see what I can feedback on.
blankers said:
Which seller have you been dealing with ?
I've just received the tracking number for my shipment.....
Click to expand...
Click to collapse
this one
Seller: kaigele on alibaba
but it was for a standard 2 din unit not for audi or specific car.
m0gs said:
this one
Seller: kaigele on alibaba
but it was for a standard 2 din unit not for audi or specific car.
Click to expand...
Click to collapse
Yes, they have ran out of units. I was also talking to him (kaigele) and they said that they have1 month delay.
Apparently they are selling a lot of units.
Maybe you can try other resellers like:
http://www.aliexpress.com/store/product/sharing-digital-2014-new-Android-4-2-3G-WIFI-universal-Car-DVD-Player-with-GPS-DUAL/312153_1672495589.html
or the one posted by @webdude12
However, I do recommend staying with kaigele. He is very responsive, seems to know about car stereos and speaks good english (with respect to alibaba and aliexpress standards..).
pakidermo5000 said:
Yes, they have ran out of units. I was also talking to him (kaigele) and they said that they have1 month delay.
Apparently they are selling a lot of units.
Maybe you can try other resellers like:
http://www.aliexpress.com/store/product/sharing-digital-2014-new-Android-4-2-3G-WIFI-universal-Car-DVD-Player-with-GPS-DUAL/312153_1672495589.html
or the one posted by @webdude12
However, I do recommend staying with kaigele. He is very responsive, seems to know about car stereos and speaks good english (with respect to alibaba and aliexpress standards..).
Click to expand...
Click to collapse
Green Point was very responsive to all my questions. Even knew what XDA was. His store is here: http://www.aliexpress.com/store/205122
Ask for a discount, my guess is you will get something. The nice thing about Green Point is he ships everything via FedEx, so no waiting weeks for the unit. He also claims that they bench test every unit before shipping to help eliminate DOA possibilities.
So FedEx has manage to loose my radio between Memphis and Nashville (4 Hour Drive). They show it being unloaded from a plane in Memphis, and loaded onto a truck that was headed to Nashville on Thursday. But it was never unloaded in Nashville. I have been on and off the phone with them all day today. Sad thing is today was my Birthday, and this was my present to myself. So I really wanted to play.
The vendor said that if its truely lost, they will get one out as soon as FedEx admits that. I want to go track down the truck driver that has my radio in his car. LOL
webdude12 said:
So FedEx has manage to loose my radio between Memphis and Nashville (4 Hour Drive). They show it being unloaded from a plane in Memphis, and loaded onto a truck that was headed to Nashville on Thursday. But it was never unloaded in Nashville. I have been on and off the phone with them all day today. Sad thing is today was my Birthday, and this was my present to myself. So I really wanted to play.
The vendor said that if its truely lost, they will get one out as soon as FedEx admits that. I want to go track down the truck driver that has my radio in his car. LOL
Click to expand...
Click to collapse
S*** man, that sucks. I hope you can get your birthday present soon.
webdude12 said:
So FedEx has manage to loose my radio between Memphis and Nashville (4 Hour Drive). They show it being unloaded from a plane in Memphis, and loaded onto a truck that was headed to Nashville on Thursday. But it was never unloaded in Nashville. I have been on and off the phone with them all day today. Sad thing is today was my Birthday, and this was my present to myself. So I really wanted to play.
The vendor said that if its truely lost, they will get one out as soon as FedEx admits that. I want to go track down the truck driver that has my radio in his car. LOL
Click to expand...
Click to collapse
I know what it's like when you're waiting for a shipment...then it disappears...wtf !
Should be easy enough to find the culprit with the tracking, but I don't suppose they will even try !
And I was looking forward to your review......
webdude12 said:
So FedEx has manage to loose my radio between Memphis and Nashville (4 Hour Drive). They show it being unloaded from a plane in Memphis, and loaded onto a truck that was headed to Nashville on Thursday. But it was never unloaded in Nashville. I have been on and off the phone with them all day today. Sad thing is today was my Birthday, and this was my present to myself. So I really wanted to play.
The vendor said that if its truely lost, they will get one out as soon as FedEx admits that. I want to go track down the truck driver that has my radio in his car. LOL
Click to expand...
Click to collapse
WTF!!! How can this even happen?
I've been watching this and other Android stereo for some time now. I hope you catch the traitor driver, lol.
Seriously though, i hope things work out for you.
gangsta101 said:
WTF!!! How can this even happen?
Click to expand...
Click to collapse
After talking with a supervisor the other day, they said that its possible and does happen sometime that as a trailer is being unloaded, a box will slide off the conveyor belt, and then accidentally get set to the side for manual sort later. Then it sometimes gets mis-placed during this process. He didnt know about Nashville, but the packages in most cities are not scanned as they come off the truck, but as they go through the sorting process in that warehouse. He was confident that they might find it Monday, but could make me no promises.
donaldta said:
And of course the adb drivers and other drivers.
Click to expand...
Click to collapse
Without knowing too much about android roms, seeing as we have the source code does that make it likely that it is possible someone would be able to build a custom rom for these devices?
Or would we still need to unlock the bootloader etc?
I bought two rootable FireTVs the day after xmas at Staples, and promptly rooted one. The other is safely tucked away in my *doomsday bunker* still sealed, waiting for armageddon.
During the rooting process I determined that I lack the attention span / ambition to install the necessary boot menu / rom manager and manually update the firmware in order to have an up-to-date stb. So, my question is twofold:
1) If I re-enable updates and remove the dns blocking, will my aftv gracefully update itself? I've already uninstalled SuperSU as I don't believe I need it.
2) Assuming the box is running the latest official rom, will the following (sideloaded) apps still work?
MXPlayer
FiredTv
DirecTV App
Android Terminal Emulator
I have also built my own simple smb folder navigation app, so obviously the ability to run apps from unknown sources is needed also. Correct me if I'm wrong, but I believe that's available on all FireOS versions.
I guess I have low standards, but this is really all I need for the box to be useful to me. I absolutely love the thing, save for the fact that the DirecTV App doesn't like the android version presumably because I never applied any updates.
spfautsch said:
I bought two rootable FireTVs the day after xmas at Staples, and promptly rooted one. The other is safely tucked away in my *doomsday bunker* still sealed, waiting for armageddon.
During the rooting process I determined that I lack the attention span / ambition to install the necessary boot menu / rom manager and manually update the firmware in order to have an up-to-date stb. So, my question is twofold:
1) If I re-enable updates and remove the dns blocking, will my aftv gracefully update itself? I've already uninstalled SuperSU as I don't believe I need it.
2) Assuming the box is running the latest official rom, will the following (sideloaded) apps still work?
MXPlayer
FiredTv
DirecTV App
Android Terminal Emulator
I have also built my own simple smb folder navigation app, so obviously the ability to run apps from unknown sources is needed also. Correct me if I'm wrong, but I believe that's available on all FireOS versions.
I guess I have low standards, but this is really all I need for the box to be useful to me. I absolutely love the thing, save for the fact that the DirecTV App doesn't like the android version presumably because I never applied any updates.
Click to expand...
Click to collapse
Be careful with the doomsday bunker firetv. If that is Series 2 in serial, you may not be able to root it. If its series 3. Ex (70900305 or 303) then you can do the Ethernet trick and root it. I'd say remove that out, root it as soon as possible and put it back in the safe. I've done just that.
Now to answer your question. I doubt you need root for what you are doing but someone else may clarify. I highly recommend keep and follow up with root. Android Rom is around the corner and features like quick support for remote desktop etc have immense benefits.
navigates said:
Be careful with the the doomsday bunker firetv. If that is Series 2 in serial, you may not be able to root it.
Click to expand...
Click to collapse
Not sure how much more careful I can be with it than setting on a shelf above my bourbon collection.
But seriously, its serial starts w/ 70900201XXXXX, are you saying its too old of firmware? If so, it sounds to me like I should let it update and put the rooted one on the shelf.
navigates said:
I highly recommend keep and follow up with root. Android Rom is around the corner and features like quick support for remote desktop etc have immense benefits.
Click to expand...
Click to collapse
I'm not sure we're on the same page w/ this. I'm very much wanting to "set it and forget it". Periodically flashing roms seems to me like the polar opposite. Reminds me of the good old days of the h-card. Life is too short to run in that exercise wheel again.
spfautsch said:
Not sure how much more careful I can be with it than setting on a shelf above my bourbon collection.
But seriously, its serial starts w/ 70900201XXXXX, are you saying its too old of firmware? If so, it sounds to me like I should let it update and put the rooted one on the shelf.
I'm not sure we're on the same page w/ this. I'm very much wanting to "set it and forget it". Periodically flashing roms seems to me like the polar opposite. Reminds me of the good old days of the h-card. Life is too short to run in that exercise wheel again.
Click to expand...
Click to collapse
Agreed with your point of view, but for my needs, I primarily need root as I use Kodi all the time. I also use quick support for remote support for my family and friends so that wouldn't work without root. Once you've got it setup with root, it stays there unless you mess it up or forgot the block or disable step. I've made a total of 22 firetv's and not one has gotten updated after I've disabled the com update.
As for the Series 2, If you try to update, it will take you to the latest version of the firmware. In old days, it would increment one. Secondly, you cannot do the removal of the Ethernet trick to make it think there is no update. If you block the updates, it will give you an error but will enforce the update. Last week, I had to make 3 firetv's for family. I had a combination of series 2 and 3. I couldn't do any of the 2's. All 3's so far were good.
The good news is that bestbuy versions are mostly series 3. The downside to series 3 is that you have to downgrade first and then go up.
Sounds like I was on base w/ the notion of letting my untouched box update and benching the rooted one until I know how my needs are served w/o superuser.
I've toyed with xbmc since well, the days when my I had to fight my kids to use their original xboxes. While I can't scoff at the quality and sheer amount of work that's been put into it, for my tastes it's always come across as an application consisting of a ton of fluff, a pound of functionality, and a half ounce of useability. I just want to watch movies. It shouldnt take 7 button presses to get to them. :-/
Hi Guys,
I have had my head unit for a month or so now and I'm looking into trying to change some things.
It's settings are:
MCU: MTCB-KLD2-V2.77
Kernal: 3.0.36+
Build: RK3188-eng4.4.4
Android: 4.4.4
Resolution: 800X480
sorry if I missed something, I'm new to these, and trying to wrap my head around all the information while trying to filter out all the stuff that doesn't apply to my unit.
I have found a dash cam app that will supposedly work once I have rooted the device, now on the wiki it says that if I type the password "*#hct#root#" into the factory settings then in theory it will enable root, does anyone have any luck with this?
I was also wondering if anyway could link me to a list of compatible 3/4G dongles (does 4g work at all) as the only "official" one from autopumkin is a brand I have never head of, although a few people around here seem to have them.
Also, I was wondering if anyone knew of a way to rebind the physical buttons? I would like to have the seek knob that is spring loaded set to a change track feature, so that spotify will pick it up, is this possible and what would I have top do to change it?
Thanks.
All your questions have been already widely discussed and answered on this forum.
Generally speaking there is some solution for all your needs, to find out how use the forum search function.
Yes the root code works.
No idea of list of dongles. I use Huawei e5337s 4g with no problems.
Search for mtc keys, xposed framework etc for your other answers
Sent from my SM-G920F using Tapatalk
Thanks, ill give the root code a go later then. Although I may just end up installing malak's ROM and kill two birds with 1 stone.
Probably the best idea. It's slicker with more functionality than stock.
Btw my single is e5573s 4G. Got my dongles mixed up. Works fine.
Sent from my SM-G920F using Tapatalk
Hi Guys,
So I have had for a while an Nexus 7 (Gen1) running in my car as a full infotainment system, and overall it works very well indeed (it has its quirks, but what doesnt!)
Anyway, with the coming changes in UK law doubling penalties and fines for anyone caught handling a phone, I wondered if MirrorLink could be a "workaround", in the sense of allowing basic phone integration without using the phone!
Anyway, I know some head units come "with MirrorLink" - the question is, can I make an android tablet come "with MirrorLink" so I can then use mirrorlink through my N7 and control my phone?
EDIT: ALSO I have just been reading on Android Auto - is there a receiver app for this as well?
EDIT 2: OK so I have found "Head Unit Reloaded" as an option for working with Android Auto, now I just need to find a way to make the tablet "Mirrorlink" receiver...
The tablet is fully rooted and runs TIMUR's USB ROM OS.
Did you find any way out for doing this ???
Did you find any way out for doing this ???, Please help me with this
jeebob said:
Hi Guys,
So I have had for a while an Nexus 7 (Gen1) running in my car as a full infotainment system, and overall it works very well indeed (it has its quirks, but what doesnt!)
Anyway, with the coming changes in UK law doubling penalties and fines for anyone caught handling a phone, I wondered if MirrorLink could be a "workaround", in the sense of allowing basic phone integration without using the phone!
Anyway, I know some head units come "with MirrorLink" - the question is, can I make an android tablet come "with MirrorLink" so I can then use mirrorlink through my N7 and control my phone?
EDIT: ALSO I have just been reading on Android Auto - is there a receiver app for this as well?
EDIT 2: OK so I have found "Head Unit Reloaded" as an option for working with Android Auto, now I just need to find a way to make the tablet "Mirrorlink" receiver...
The tablet is fully rooted and runs TIMUR's USB ROM OS.
Click to expand...
Click to collapse
Unfortunately not. I just had to use a variety of different apps to get it working as close as reasonable.
jeebob said:
Unfortunately not. I just had to use a variety of different apps to get it working as close as reasonable.
Click to expand...
Click to collapse
Mirrorlink is 10x dumber than Android Auto.
For a ML-like app search EasyConnect. It's the app that comes with all chinese Android units and allows for full mirroring of the phone.
There are also a number of Android-based alternatives like using Miracast.
However, in terms of driving safety AA is way better than any screen mirroring.