Develop Bugs

[27/8][Share][Mod] Apps and Sounds Collection (Little or Beta right now )

Closed

Initial Release

Reserved

Phone keeps rebooting after flash walkman and its buildprop mod
Sent from my HM 1SW

aldirudianto said:
Phone keeps rebooting after flash walkman and its buildprop mod
Sent from my HM 1SW
Click to expand...
Click to collapse
Which version of android you are using
flash only for appropriate version
And i personally confirmed it working on all lollipop roms
and follow the instructions delete stock music and audiofx from system/app and system/priv-app

eswarvf said:
Which version of android you are using
flash only for appropriate version
And i personally confirmed it working on all lollipop roms
and follow the instructions delete stock music and audiofx from system/app and system/priv-app
Click to expand...
Click to collapse
I am using cm12.1, i had followed the instructions, i think xposed is behind of it, romracer's version is still buggy, i'll try it later without xposed or with rovo's exposed
One more question, would it work fine with viper4android? Because i really love with the sound production of it
Sent from my HM 1SW

aldirudianto said:
I am using cm12.1, i had followed the instructions, i think xposed is behind of it, romracer's version is still buggy, i'll try it later without xposed or with rovo's exposed
One more question, would it work fine with viper4android? Because i really love with the sound production of it
Sent from my HM 1SW
Click to expand...
Click to collapse
I am using it right now with xposed installed.
Its not the issue and no it wont work with viper4android instead we get clear audio+ which is good and with xb 50ap earphones my phone is rocking with the settings
I have reset the links try again

eswarvf said:
I am using it right now with xposed installed.
Its not the issue and no it wont work with viper4android instead we get clear audio+ which is good and with xb 50ap earphones my phone is rocking with the settings
I have reset the links try again
Click to expand...
Click to collapse
Which xposed version do u use?
Sent from my HM 1SW

aldirudianto said:
Which xposed version do u use?
Sent from my HM 1SW
Click to expand...
Click to collapse
the old super alpha
not by rovo as i am satisfied with alpha

eswarvf said:
Hi there. I want to Share some apps and Sounds here and will update with new apps time to time
its very small right now but in time believe me ill make it a mess
Note:This thread is collection of hard work from different Devs and some of my tweaks.All of these are tested on CM12.1 and Sounds are universally flashable
Samsung and Mi Sounds (Alarms,Ringtones,Notifications)
here
The Beautiful and Powerful the best: Mixplorer ,Trust me the Best Files explorer even better than stock one (Works on every OS)
Here
Walkman (with updates from playstore, If you own a sony earphones like me then you must use this one)
Here
Don't know how it works or may be due to z3 framework but lets begin
Instructions:
1)Go to the link and download it for the appropriate android version
2)Delete AudioFX, DSP Manager, etc before flashing
3)Flash only Walkman player and build prop fix and don't flash addons
4)Now you can get music update from playstore
Quickboot for Snapdragon devices (enable it in developer options)
here​​​
Click to expand...
Click to collapse
First of all thanks for your effort.But the walkman is not working after updating in playstore.It's force closing.

vicky romero said:
First of all thanks for your effort.But the walkman is not working after updating in playstore.It's force closing.
Click to expand...
Click to collapse
which rom buddy and working perfectly on moto e and s iii mini too,just try clearing data and delete audiofx from system/priv-app and even stock music player too (ignore if u did these)

eswarvf said:
which rom buddy and working perfectly on moto e and s iii mini too,just try clearing data and delete audiofx from system/priv-app and even stock music player too (ignore if u did these)
Click to expand...
Click to collapse
Tried everything u have said but no use. Still the app is forseclosing. I'm currently using cm 12.1 on my redmi 1s.

vicky romero said:
Tried everything u have said but no use. Still the app is forseclosing. I'm currently using cm 12.1 on my redmi 1s.
Click to expand...
Click to collapse
It will only happen if u have downloaded and flashed extra addons or using sound mods like dolby or viper or something else

eswarvf said:
It will only happen if u have downloaded and flashed extra addons or using sound mods like dolby or viper or something else
Click to expand...
Click to collapse
No i haven't flashed anything except walkman. I did a clean install of the rom and flashed the zip again but the issue still persists
Sent from my HM 1SW using Tapatalk

vicky romero said:
No i haven't flashed anything except walkman. I did a clean install of the rom and flashed the zip again but the issue still persists
Sent from my HM 1SW using Tapatalk
Click to expand...
Click to collapse
I am sorry for asking this but still i need to get the point
did u flash the z3 build prop fix
If flashed did u do it in order after flashing walkman then z3 build prop fix ?
It working for me look for screen and same on cm12.1

eswarvf said:
I am sorry for asking this but still i need to get the point
did u flash the z3 build prop fix
If flashed did u do it in order after flashing walkman then z3 build prop fix ?
It working for me look for screen and same on cm12.1
Click to expand...
Click to collapse
Yes i have flashed them in order that you have mentioned. But it's still not working
Sent from my HM 1SW using Tapatalk

[MAGISK] Android Pie Fonts

Thanks to @Shooting Star Max for extracting the files from the Android P Developer Preview 3. I've made his Magisk zip into a Unity installer zip file that allows you to install and uninstall the module easily. I've also uploaded the module to Github and now currently awaiting approval for uploading to the Magisk Repo.
Module is now updated to reflect the latest fonts from Android Pie PR2. Latest fonts extract from the Pixel 3 XL factory image.
The default font is still Roboto so if you don't find much changes, that means you're still up-to-date.
Google Sans mostly works on Pixel devices and some highlights on stock Android devices.
To find the new emojis, check on this website.
DOWNLOADS
Install through Magisk Repo or manually download the zip and install as a Magisk module.

Great work. Thanks a lot. Flashed on AEX, working fine.
Sent from my Mi A1 using XDA Labs

moonsmart00712345 said:
Great work. Thanks a lot. Flashed on AEX, working fine.
Sent from my Mi A1 using XDA Labs
Click to expand...
Click to collapse
You're welcome! Thanks for your feedback! :highfive:

This is just new Emojis or also font(s)?

Flashed it on my OP5T. Seems to be working right now, just not the new emojis.

annaheim said:
Flashed it on my OP5T. Seems to be working right now, just not the new emojis.
Click to expand...
Click to collapse
How do you switch the font?

knapz said:
How do you switch the font?
Click to expand...
Click to collapse
The fonts come preloaded. You can't switch them. That's how the fonts are in Android P.
Sent from my Xiaomi Mi A1 using XDA Labs

Will it work in bacon? I'm on sultan nougat.

M∆√€ℜｴ¢K JꑙHℕ said:
Will it work in bacon? I'm on sultan nougat.
Click to expand...
Click to collapse
It should.

joeyhuab said:
It should.
Click to expand...
Click to collapse
Let's try then. Thank you.

Simply bootloop on lg g6 h870 stock oreo and magisk 16.4. Solved in recovery disabling the module via mm.

Animated emojis would look so so cool.

siggey said:
Simply bootloop on lg g6 h870 stock oreo and magisk 16.4. Solved in recovery disabling the module via mm.
Click to expand...
Click to collapse
What other modules do you have installed? There might be some conflicts.

joeyhuab said:
What other modules do you have installed? There might be some conflicts.
Click to expand...
Click to collapse
Just these

can i flash this on aosip oreo?

Works in LineageOS?

Great Emojis thx developers

There is any way to revert to my old font.
I tried it but its not changing.

Dextrob said:
There is any way to revert to my old font.
I tried it but its not changing.
Click to expand...
Click to collapse
Try flashing roboto font that is your stock font

Do I have to uninstall current font module before flashing this? Or simply flashing over it would work?

viper on 9.0?

Anyone got v4a running on 9.0 with magisk?

Cowbell_Guy said:
Anyone got v4a running on 9.0 with magisk?
Click to expand...
Click to collapse
Yep :good:
https://forum.xda-developers.com/pixel-2-xl/how-to/viper-dd-atom-t3724096/post77270012

+1 via magisk module download.

madscribblerz said:
+1 via magisk module download.
Click to expand...
Click to collapse
Which module?

Cowbell_Guy said:
Which module?
Click to expand...
Click to collapse
Here's what I'm using

Cowbell_Guy said:
Which module?
Click to expand...
Click to collapse
This one

Doesn't work for me.. at least I don't see.. I don't hear any difference.. any advice?

bnbagiz said:
Doesn't work for me.. at least I don't see.. I don't hear any difference.. any advice?
Click to expand...
Click to collapse
Uninstall viper and the audio modification module. Install the viper fx module and choose original at install don't reboot. Install the audio modification module reboot. If viper has an update do this again. Hope it helps.

miked2332 said:
Uninstall viper and the audio modification module. Install the viper fx module and choose original at install don't reboot. Install the audio modification module reboot. If viper has an update do this again. Hope it helps.
Click to expand...
Click to collapse
the last time i have used viper i did not install any audio modification module. so maybe that was the problem. can you recommend one?

bnbagiz said:
the last time i have used viper i did not install any audio modification module. so maybe that was the problem. can you recommend one?
Click to expand...
Click to collapse
They're in the Magisk Module Repo.
You only need to install the modification library if you install other audio mods aside from Viper. What you might've been missing is the Audio Compatibility Patch(also in the repo). This is needed to allow all audio(such as Soundcloud that uses it's own EQ) to go through Viper. The only downside with the compatibility patch on the P2XL, it causes stuttering when 2 audio sources try to overlap each other for a good, lets say 10 seconds?

miked2332 said:
Uninstall viper and the audio modification module. Install the viper fx module and choose original at install don't reboot. Install the audio modification module reboot. If viper has an update do this again. Hope it helps.
Click to expand...
Click to collapse
..

I use this viper and have to remove and reinstall this audio mod Everytime there is a viper update. I forgot to mention I had overlap over Bluetooth about 50% of the time for the duration of use. I disabled music fx and it fixed it. For viper I choose new and original theme.

Sorry to bump an old post, but does anyone who has viper working on pie when they reboot their phone viper opens up automatically? I installed through magisk and am still on the initial release of pie. It works I just never had this happen before and curious if I'm the only one.

Fe Mike said:
Sorry to bump an old post, but does anyone who has viper working on pie when they reboot their phone viper opens up automatically? I installed through magisk and am still on the initial release of pie. It works I just never had this happen before and curious if I'm the only one.
Click to expand...
Click to collapse
You could always try this V4A version and installation. Haven't seen the issue that your reporting on this particular version and setup :good:
https://forum.xda-developers.com/pi...iper4android-compatible-t3929914/post80185220

Badger50 said:
You could always try this V4A version and installation. Haven't seen the issue that your reporting on this particular version and setup :good:
https://forum.xda-developers.com/pi...iper4android-compatible-t3929914/post80185220
Click to expand...
Click to collapse
Thank you, I'll try it out after work.

FM Radio Magisk module

Test version (I don't own this device).
Flash in Magisk Manager.
This module sets selinux to permissive.
Only for stock ROM.
https://1drv.ms/u/s!AnNVEh3KeCSVj-IKOvQ_qpynrgRtwg

Any possibility to have FM radio app working without root? For example adb flashable zip..

Sorry, can u explaint more about it... thanks alot !!!

assal said:
Sorry, can u explaint more about it... thanks alot !!!
Click to expand...
Click to collapse
If you have Magisk installed flash it thru the Magisk app.

cheeze.keyk said:
If you have Magisk installed flash it thru the Magisk app.
Click to expand...
Click to collapse
Thanks but is it needed a radio app? or the module inclusive it?

assal said:
Thanks but is it needed a radio app? or the module inclusive it?
Click to expand...
Click to collapse
It's already included.

Thanks to @ture71 for providing files and testing.
Last ROM version:
https://1drv.ms/u/s!AnNVEh3KeCSVj-IMmFn70SaUDCEb8g

I installed this module.After installing this module, I have the video stretched to full screen.removed this module, everything became normal.what is the problem?sorry for english

install this apk https://drive.google.com/file/d/0B4sAcI5G6CpxNXFTZm9nSGhIdWM/view, you need root access and the headphones plugged in.

If using a treble gsi rom installing this module will lead in a bootloop! Tried with RR and Omni!

Voodoojonny said:
If using a treble gsi rom installing this module will lead in a bootloop! Tried with RR and Omni!
Click to expand...
Click to collapse
This module is only for stock ROM.

sipollo said:
This module is only for stock ROM.
Click to expand...
Click to collapse
Perhaps you can write it in op...

Ok, tried on stock! It works, but not recommending. This one creates different problems:
1. Random reboots - mostly when using an app which needs full screen
2. Picture in fullscreen not centered on screen - on top some info missing...
Disabling module fixes the problems

Voodoojonny said:
Ok, tried on stock! It works, but not recommending. This one creates different problems:
1. Random reboots - mostly when using an app which needs full screen
2. Picture in fullscreen not centered on screen - on top some info missing...
Disabling module fixes the problems
Click to expand...
Click to collapse
I don't own this device. If you upload your services.jar (disable module first) I can try to make a more compatible version. Copy file from adb with /system mounted as read-only.

Voodoojonny said:
Ok, tried on stock! It works, but not recommending. This one creates different problems:
1. Random reboots - mostly when using an app which needs full screen
2. Picture in fullscreen not centered on screen - on top some info missing...
Disabling module fixes the problems
Click to expand...
Click to collapse
This module works sure with last firmware and September OTA update....check firmware and OTA.....

Mi A2 Lite (daisy).
Does anyone know which magisk module "Dolby Atmos Oreo" works on MI A2?
These files (links) does not work, cause infinite loop. And you will have to uninstall the magisk to resolve and then just install the magisk again.
https://forum.xda-developers.com/android/software/app-dolby-atmos-axon-7-oreo-port-t3740508
https://androidfilehost.com/?fid=673956719939820999
http://prntscr.com/l77tt8
https://zackptg5.com/android.php#aml
https://zackptg5.com/downloads/Audio-Modification-Library_v1.8.1.zip
https://zackptg5.com/downloads/Dolby-Atmos-Axon7-Oreo_09.20.2018.zip

sipollo said:
I don't own this device. If you upload your services.jar (disable module first) I can try to make a more compatible version. Copy file from adb with /system mounted as read-only.
Click to expand...
Click to collapse
Hey that sounds great. I uploaded the services.jar via gdrive
Really aprreciate your engagement! Thank you!
---------- Post added at 03:21 PM ---------- Previous post was at 03:20 PM ----------
ture71 said:
This module works sure with last firmware and September OTA update....check firmware and OTA.....
Click to expand...
Click to collapse
Yes it works, as I said... But creates problems... I´m on sept. ota...

Voodoojonny said:
Hey that sounds great. I uploaded the services.jar via gdrive
Click to expand...
Click to collapse
Try this and let me know if it works:
https://1drv.ms/u/s!AnNVEh3KeCSVj-IMmFn70SaUDCEb8g

sipollo said:
Try this and let me know if it works:
https://1drv.ms/u/s!AnNVEh3KeCSVj-IMmFn70SaUDCEb8g
Click to expand...
Click to collapse
Works and all problems solved! Thank you very much!

Missing RDS
sipollo said:
Try this and let me know if it works:
https://1drv.ms/u/s!AnNVEh3KeCSVj-IMmFn70SaUDCEb8g
Click to expand...
Click to collapse
Thank you, it seems to work well.
But it hasn't RDS support (to show station's names)
Is there a way to enable RDS?

Sound Mod

Is there any working sound mod for pie?
Tried Dolby digital Plus but app crashes.
Sound quality through speakers is mediocre.

Samirmathakiya said:
Is there any working sound mod for pie?
Tried Dolby digital Plus but app crashes.
Sound quality through speakers is mediocre.
Click to expand...
Click to collapse
flash zero audio patch for volume gain and viper for tweaking stuff (both work for pie) , you will need audio modification library module if you want to use both .
PS- I'm using this combo and it works well on lineage .

samartht said:
flash zero audio patch for volume gain and viper for tweaking stuff (both work for pie) , you will need audio modification library module if you want to use both .
PS- I'm using this combo and it works well on lineage .
Click to expand...
Click to collapse
Can you provide link for viper?

Samirmathakiya said:
Can you provide link for viper?
Click to expand...
Click to collapse
Sure, here you go - https://zackptg5.com/downloads/v4afx_v2.7.1.0.zip

samartht said:
Sure, here you go - https://zackptg5.com/downloads/v4afx_v2.7.1.0.zip
Click to expand...
Click to collapse
What about audio modification library?

sound is lower in pie since there is no dolby that magically enhance the effect. especially in Pubg, i barely hear nothing with the speaker.

Samirmathakiya said:
What about audio modification library?
Click to expand...
Click to collapse
I'm sorry kind of late but I've attached the zip in case you still want it.

samartht said:
I'm sorry kind of late but I've attached the zip in case you still want it.
Click to expand...
Click to collapse
Thanks again. I tried but viper says no drivers found.
Downloaded driver, rebooted then same story goes on.

Samirmathakiya said:
Thanks again. I tried but viper says no drivers found.
Downloaded driver, rebooted then same story goes on.
Click to expand...
Click to collapse
Use viperfx 3.4.2
I am using dts, viperfx and Dolby all are working. My rom is miui ms 9.9.3.
You tube vanced all are working perfectly .

seking said:
Use viperfx 3.4.2
I am using dts, viperfx and Dolby all are working. My rom is miui ms 9.9.3.
You tube vanced all are working perfectly .
Click to expand...
Click to collapse
This is amazing can you link them and give installation instructions?

Samirmathakiya said:
This is amazing can you link them and give installation instructions?
Click to expand...
Click to collapse
Dolby link
https://mega.nz/#!3ZtTDSZC!B2gYDaF0H8Cwwwb5kMRoS6AfbU3CV9pI7pzfE2mFI6k
DTS
https://mega.nz/#!eJsnmCCa!UQn2F6Ce3ofSN0fcBVGNadpQSnT-D2enMWjgsdAitwc
Viperfx
https://mega.nz/#!qct3XQ7L!Y9TknqpbOKMwfsp7qFN7RRMYNGK0fBY-Lnv7ZFgXwIA
Install the above through magisk

seking said:
Dolby link
https://mega.nz/#!3ZtTDSZC!B2gYDaF0H8Cwwwb5kMRoS6AfbU3CV9pI7pzfE2mFI6k
DTS
https://mega.nz/#!eJsnmCCa!UQn2F6Ce3ofSN0fcBVGNadpQSnT-D2enMWjgsdAitwc
Viperfx
https://mega.nz/#!qct3XQ7L!Y9TknqpbOKMwfsp7qFN7RRMYNGK0fBY-Lnv7ZFgXwIA
Install the above through magisk
Click to expand...
Click to collapse
Thanks man ! It worked:laugh: