Develop Bugs

[Overlay] Disable Mobile Data Notification

Hi All
Today i want to share you all a simple modding file to disable annoyed Mobile Data Notification. Flash in recovery
Test on my Z5D, MM 6.0.1 rooted, deodexed.

devilmaycry2020 said:
Hi All
Today i want to share you all a simple modding file to disable annoyed Mobile Data Notification. Flash in recovery
Test on my Z5D, rooted, deodexed.
Click to expand...
Click to collapse
It would be nice if you could disable the Sync pop-up message as well when you turn it OFF/ON from the Notification.

Work for z1?

Glex01 said:
Work for z1?
Click to expand...
Click to collapse
I don't know, just try it and see. Backup before flash file.

I use an xposed module called xphoneplus to disable it. I'm using other xposed modules any way.

venomxob said:
I use an xposed module called xphoneplus to disable it. I'm using other xposed modules any way.
Click to expand...
Click to collapse
You are welcome.

venomxob said:
I use an xposed module called xphoneplus to disable it. I'm using other xposed modules any way.
Click to expand...
Click to collapse
Which module disables this plz ? Does it work in 6.0.1 ?

GryTEcHoG said:
Which module disables this plz ? Does it work in 6.0.1 ?
Click to expand...
Click to collapse
Xphone plus disables it. It works on 6.0.1. I'm currently using it on stock .575

Work on my M2 2303 5.1.1 nice.

Works on MM beta .238 Z3C (manual install)

devilmaycry2020 said:
Hi All
Today i want to share you all a simple modding file to disable annoyed Mobile Data Notification. Flash in recovery
Test on my Z5D, MM 6.0.1 rooted, deodexed.
Click to expand...
Click to collapse
Works fine by manual install.
Flashing zip did not work.
Thanks!

@devilmaycry2020,want to ask,if want remove it permanently,which apk should be edited sir?

Mirza_H said:
@devilmaycry2020,want to ask,if want remove it permanently,which apk should be edited sir?
Click to expand...
Click to collapse
It's permanent already mate. It's a easy method. If you don't want to use this method you can edit file TeleService.apk. I've tried to edit TeleService.apk before but it's seem have problem with sim card. It didn't recognize carriers network.

I use module in Xposed
DTN Disabler
https://goo.gl/tgT65g

devilmaycry2020 said:
It's permanent already mate. It's a easy method. If you don't want to use this method you can edit file TeleService.apk. I've tried to edit TeleService.apk before but it's seem have problem with sim card. It didn't recognize carriers network.
Click to expand...
Click to collapse
thanks, I just want to try it without using this overlay, but I've tried to use this overlay and it works well .

another xposed module to look into would be notify clean, works for all android notifications.

working on m4 aqua (e2306) 6.0.1
the zip is installing the overlay in /system/oem/overlay
that folder is not used in many roms, the real one is /system/vendor/overlay
that's why is not working in some models
thanks for sharing!!

sergioslk said:
working on m4 aqua (e2306) 6.0.1
the zip is installing the overlay in /system/oem/overlay
that folder is not used in many roms, the real one is /system/vendor/overlay
that's why is not working in some models
thanks for sharing!!
Click to expand...
Click to collapse
Thanks for the info. Just update the right file.

Thank you @devilmaycry2020 .. now it works on my Xperia Z2...

[APP][ROOT][Camera APK][XZ Series] Ultimate Unlocked Camera with Full Manual Controls

....:::: Finally Its Here ::::....
First Time Ever for XZ series users
Introducing
Manual Focus
&
Manual Shutter Speed
Modified SEMCCameraUI.APK from XZ Stock Firmware [vF8332_39.0.A.1.250]
With Unlocked All Options, Intelligent Active Everywhere,
Scenes, ISOs and So on...​
Download Links :
Go to this thread , download the attached APK
Important Notice:
Use the APK as-is , copy it to the exact location of the existing camera apk and delete the old one. Set permission to 644. So you need root access for sure.
Please do not steal my work, Always ask for permission via PM and give credits accordingly ​
Credits:
I am forever grateful to the creators of the APKTOOL & Advance APKTOOL

Error camera is in use
Thanks for the mod. Installed it on my xz. Unfortunately I get the error message "camera is in use by another application try again later" .Set the permissions, deleted cache and data from the camera app ..still the same any idea?
Best

ojessie said:
Thanks for the mod. Installed it on my xz. Unfortunately I get the error message "camera is in use by another application try again later" .Set the permissions, deleted cache and data from the camera app ..still the same any idea?
Best
Click to expand...
Click to collapse
You need patched services.jar (superuser mod) and root of course

All seems to be working here ?
Running RomAur 1.1 just installed latest apk directly.
Sent from my F8331 using Tapatalk

Thanx a lot for that mod. It works perfectly?
For people using RomAur Rom: just install the app. No replacing needed with the SemcCamera apk with root browser.

Will this camera work too under these conditions: unlocked bootloader, twrp and androplus-kernel-v04 flashed. No custom ROM installed till now.
Is a parallel install, existing old camera and the new camera from here possible?

​
paulle said:
Will this camera work too under these conditions: unlocked bootloader, twrp and androplus-kernel-v04 flashed. No custom ROM installed till now.
Is a parallel install, existing old camera and the new camera from here possible?
Click to expand...
Click to collapse
Yes it worked for me f8332

karrouma said:
​
Yes it worked for me f8332
Click to expand...
Click to collapse
Did you have to delete the original camera or have the original camera and this one here working side by side?

paulle said:
Did you have to delete the original camera or have the original camera and this one here working side by side?
Click to expand...
Click to collapse
Replace it by any file manager, and give it thr right permission.
Do a backup for original camera app

karrouma said:
Replace it by any file manager, and give it thr right permission.
Do a backup for original camera app
Click to expand...
Click to collapse
first try wasn't successful, but weekend I will be at home (and having a little bit more time) will try it again. Thanks for your advices.

Could someone include some pictures ? (For Comparison)

What is the path where you have to copy the apk from the camera?

It gives an error "another app is using it try again later"

Mangtas_666 said:
It gives an error "another app is using it try again later"
Click to expand...
Click to collapse
Because you'll need xposed and superuser mode installed.

Mangtas_666 said:
It gives an error "another app is using it try again later"
Click to expand...
Click to collapse
I am rooted and xposed installed.. What module should i install to get it working? And i havent read it in the op thats telling xposed is needed.
---------- Post added at 01:42 AM ---------- Previous post was at 01:41 AM ----------
nolihowell said:
Because you'll need xposed and superuser mode installed.
Click to expand...
Click to collapse
What module should i install?

Mangtas_666 said:
I am rooted and xposed installed.. What module should i install to get it working? And i havent read it in the op thats telling xposed is needed.
---------- Post added at 01:42 AM ---------- Previous post was at 01:41 AM ----------
What module should i install?
Click to expand...
Click to collapse
The module is called superuser mode

nolihowell said:
Because you'll need xposed and superuser mode installed.
Click to expand...
Click to collapse
Is xposed framework required on this mod?

nolihowell said:
The module is called superuser mode
Click to expand...
Click to collapse
I don't see any superuser mode module in xposed. Can you post the link please. All i know is superuser for aquiring root.

Mangtas_666 said:
I don't see any superuser mode module in xposed. Can you post the link please. All i know is superuser for aquiring root.
Click to expand...
Click to collapse
http://forum.xda-developers.com/crossdevice-dev/sony/xposed-super-user-mode-x-v1-0-0-t3383183/page6

nolihowell said:
http://forum.xda-developers.com/crossdevice-dev/sony/xposed-super-user-mode-x-v1-0-0-t3383183/page6
Click to expand...
Click to collapse
So activate the super usee mode before installing this camera mod?

deleted

GTFO

will it work on miui marshmallow rom?

mohdmujahidansari526 said:
will it work on miui marshmallow rom?
Click to expand...
Click to collapse
No. Its for custom nougat. Like all a1 ports.

Works like a charm. Many thanks.
Can you post a version that when you tape the preview, it open a window to choose the app.

filnirv said:
Works like a charm. Many thanks.
Can you post a version that when you tape the preview, it open a window to choose the app.
Click to expand...
Click to collapse
Cant do this. Its work on some roms, but on some its fc issuse. You can delete stock gallery for that.

maxsmeller said:
Cant do this. Its work on some roms, but on some its fc issuse. You can delete stock gallery for that.
Click to expand...
Click to collapse
It will be nice to choose different gallery.

filnirv said:
It will be nice to choose different gallery.
Click to expand...
Click to collapse
Yes. But i do wat i can do. Im not so cwalifed to write smali code.

I'm coming from v6 Mini cam and dirty flashed your modified version but I'm still facing the fc issue. Do I have to remove the old cam first? Does HAL3 need to be on or off?
I'd welcome any help.
I'm on:
ROM: newest XPerience build
Kernel: Xperience stock kernel
Magisk: yes
Xposed: yes (official, no modules installed, yet)
===== Edit =====
Deactivating the gallery app doesn't work for me. I'm now using Google's gallery app. It has an option that allows to open the preview. This kind of works as a workaround but I'd rather use another gallery app.

batatok said:
I'm coming from v6 Mini cam and dirty flashed your modified version but I'm still facing the fc issue. Do I have to remove the old cam first? Does HAL3 need to be on or off?
I'd welcome any help.
I'm on:
ROM: newest XPerience build
Kernel: Xperience stock kernel
Magisk: yes
Xposed: yes (official, no modules installed, yet)
===== Edit =====
Deactivating the gallery app doesn't work for me. I'm now using Google's gallery app. It has an option that allows to open the preview. This kind of works as a workaround but I'd rather use another gallery app.
Click to expand...
Click to collapse
Same Rom and same MIUI Camera Apk (MIUI v5). Just go to System/ Apps, delete "miuicamera" folder. Then reboot into the recovery, clear cache and then flash this camera Zip. HDR working, save in SD working too....

maxsmeller said:
Cant do this. Its work on some roms, but on some its fc issuse. You can delete stock gallery for that.
Click to expand...
Click to collapse
Deleted stock gallery, app crash.[emoji19]

kukuteku said:
Same Rom and same MIUI Camera Apk (MIUI v5). Just go to System/ Apps, delete "miuicamera" folder. Then reboot into the recovery, clear cache and then flash this camera Zip. HDR working, save in SD working too....
Click to expand...
Click to collapse
It worked, thank you! But just for the record, the "miui camera" folder was in priv-apps/ in my case.

batatok said:
It worked, thank you! But just for the record, the "miui camera" folder was in priv-apps/ in my case.
Click to expand...
Click to collapse
:facepalm: :silly:
My Bad! Yes, its in "priv-apps" folder...

If you report about bug, fc etc please give logcat, rom version, etc
mizdrake7 create new cool version. My cam with his own icon. What is it? Cool moding?

App crash when selecting matte option[emoji45]

filnirv said:
App crash when selecting matte option[emoji45]
Click to expand...
Click to collapse
I don't have that issue. Care to share logs so someone might be able to help?

batatok said:
I don't have that issue. Care to share logs so someone might be able to help?
Click to expand...
Click to collapse
How to get the log?

Will flashing this remove any other mi camera mods?

I will try it latter when I updated my rr rom, and then write a review ?

filnirv said:
How to get the log?
Click to expand...
Click to collapse
I'm using Alessa which is included in Xperience. You can also install Kernel Adiutor from playstore.
1) reboot your device
2) reproduce the error
3) start Alessa/ Kernel Adiutor and go to settings/debugging. There should be an option to copy the logcat to sdcard.
4) attach the log file
Best regards
---------- Post added at 09:42 PM ---------- Previous post was at 09:37 PM ----------
basiljose007 said:
Will flashing this remove any other mi camera mods?
Click to expand...
Click to collapse
Not cleanly. You should follow the instructions from the other thread and make sure to wipe cache before flashing this cam.

What's wrong with this thread?

Black Status Bar

I just put this mod in with my Zip Mod Installer but since it works without having to install one of my bases I thought I would put it out here. This mod doesn't affect the navbar like my first one (where it turned black also) so you don't have to remove it if you don't want to. Flash in TWRP. A Magisk version is available also but it too must be installed via TWRP. STOCK ONLY
Regular uploaded 2-9-19
https://www.androidfilehost.com/?fid=1395089523397888331
Regular edge sense compatible (don't flash edge sense module, just install the app)
https://www.androidfilehost.com/?fid=1395089523397888333
Magisk uploaded 2-9-19
https://www.androidfilehost.com/?fid=1395089523397888329
Magisk edge sense compatible (don't flash edge sense module, just install the app)
https://www.androidfilehost.com/?fid=1395089523397888327

Tulsadiver said:
I just put this mod in with my Zip Mod Installer but since it works without having to install one of my bases I thought I would put it out here. This mod doesn't affect the navbar like my first one (where it turned black also) so you don't have to remove it if you don't want to. Flash in TWRP. A Magisk version is available also but it too must be installed via TWRP.
Regular uploaded 1-17-19
https://www.androidfilehost.com/?fid=11410963190603903070
Magisk uploaded 1-17-19
https://www.androidfilehost.com/?fid=11410963190603903075
Click to expand...
Click to collapse
Thanks for mod. Somehow the magisk version doesn't do anything on my device... It's activated in magisk but status bar stays as it was before.

Donric13 said:
Thanks for mod. Somehow the magisk version doesn't do anything on my device... It's activated in magisk but status bar stays as it was before.
Click to expand...
Click to collapse
Do you have edge sense installed?

Tulsadiver said:
Do you have edge sense installed?
Click to expand...
Click to collapse
Yes. Aha this seems the problem i think..... Any solution?

Donric13 said:
Yes. Aha this seems the problem i think..... Any solution?
Click to expand...
Click to collapse
I'll make an edge sense version when I get to work.

Donric13 said:
Yes. Aha this seems the problem i think..... Any solution?
Click to expand...
Click to collapse
Did you try edge sense after you installed my mod and uninstalled active edge module? I didn't think he did any smali editing so it should work with just using his app.

Tulsadiver said:
Did you try edge sense after you installed my mod and uninstalled active edge module? I didn't think he did any smali editing so it should work with just using his app.
Click to expand...
Click to collapse
Edgesense is still working after installation of your mod. Both modules are active in magisk. I'll try disabeling his mod and report.

No success. Disabeling his mod and edge sense app isn't working. But also your mod isn't working. Deinstalled edge sense mod (deleted modul in magisk) and reinstalled your mod. Didn't work. Here some screenshots

Donric13 said:
No success. Disabeling his mod and edge sense app isn't working. But also your mod isn't working. Deinstalled edge sense mod (deleted modul in magisk) and reinstalled your mod. Didn't work. Here some screenshots
Click to expand...
Click to collapse
You might have other modules interfering. Looks like you have quite a few.

Tulsadiver said:
You might have other modules interfering. Looks like you have quite a few.
Click to expand...
Click to collapse
Hmm... Deactivated all other modules than yours. Still no success. Maybe something still remains somewhere... Anyway thanks for your good work for all those devices. Gonna try again after a clean flash (propably next security patch....).

Donric13 said:
Hmm... Deactivated all other modules than yours. Still no success. Maybe something still remains somewhere... Anyway thanks for your good work for all those devices. Gonna try again after a clean flash (propably next security patch....).
Click to expand...
Click to collapse
Here is how you should do it after I upload a edge sense version.
Flash flash-all.bat after taking out the -w so data won't wipe.
Reboot
Boot back into bootloader
fastboot boot TWRP.img
Flash TWRP.zip
Flash Magisk uninstaller
Flash kernel if you like
Flash magiskv18
Reboot verify root
Boot into TWRP
Flash my regular edge sense mod, not Magisk version
Reboot
Proceed to install all of your modules minus edge sense module
Done

Okay. Let's flash... Gonna start already with flashing factory image to be prepared. Thanks.

Donric13 said:
Okay. Let's flash... Gonna start already with flashing factory image to be prepared. Thanks.
Click to expand...
Click to collapse
I just uploaded what should be edge sense compatible mods.

Tulsadiver said:
I just uploaded what should be edge sense compatible mods.
Click to expand...
Click to collapse
:good: working perfect. Just installed the non magisk module and now it works as intended (black status bar and edge sense) ! Big thanks. Now gonna install other modules (exept edge sense).

Tulsadiver said:
I just uploaded what should be edge sense compatible mods.
Click to expand...
Click to collapse
Hello,
thanks for making this. i tried installing for magisk and its not working for me (stock/rooted 3XL). no edge sense apps/magisk modules installed. I'm willing to try the non-magisk version, but i don't see anything in the OP about how to remove this if i don't like it.
Also, does this enable two rows of notifications like in your screenshot? Thanks!

hochoch said:
Hello,
thanks for making this. i tried installing for magisk and its not working for me (stock/rooted 3XL). no edge sense apps/magisk modules installed. I'm willing to try the non-magisk version, but i don't see anything in the OP about how to remove this if i don't like it.
Also, does this enable two rows of notifications like in your screenshot? Thanks!
Click to expand...
Click to collapse
I can give you a restore to flash. The two rows of statusbar are available in my other thread (ADB and Zip installer). If you haven't installed any modules then the regular one would be the right one.

Works great with Round Screen app from the Play Store. It's the only rounded corner overlay app I've tried that doesn't have a persistent notification. @Tulsadiver any plans on making native round corners in the mod?

widezu69 said:
Works great with Round Screen app from the Play Store. It's the only rounded corner overlay app I've tried that doesn't have a persistent notification. @Tulsadiver any plans on making native round corners in the mod?
Click to expand...
Click to collapse
It is native as is. I didn't make the screen square. All I did was change the status bar black. I've tried a few things to try and get it rounded but so far it hasn't worked.

Anybody tried this mod on february security update? I'm on holiday and cant update to february build before saturday...
Edit: seems SystemUI.apk has no changes in february update. So i think the mod will work with no issues.

SystemUI changed. So flashing this mod on february update leads to bootloop... But is no problem because now this mod seems to be integrated in flashable zips in Tulsadiver's main thread. There all is updated to february patch. So no need to update this mod.

Fixed Viper4Android for MI A2 Lite

Hey guys! I created a Viper4Android version that doesn't breaks WIFI and/or Camera.
Other V4A versions needs to be uninstalled.
Link: https://drive google.com/open?id=1NCSuF9LH4XkZKSeFdYDo1Xh05Rb05Jxm
Jusp put the dot on the "drive google"
Install the zip as a Magisk Module

Gustavo_Jadson said:
Hey guys! I created a Viper4Android version that doesn't breaks WIFI and/or Camera.
Other V4A versions needs to be uninstalled.
Link: https://drive google.com/open?id=1NCSuF9LH4XkZKSeFdYDo1Xh05Rb05Jxm
Jusp put the dot on the "drive google"
Click to expand...
Click to collapse
Thanks, unfortunately it's not possible to install it. It's stuck at "patching existing audio effects files" in TWRP.

Veran125 said:
Thanks, unfortunately it's not possible to install it. It's stuck at "patching existing audio effects files" in TWRP.
Click to expand...
Click to collapse
This is a Magik Module, not a flashable zip.

Gustavo_Jadson said:
This is a Magik Module, not a flashable zip.
Click to expand...
Click to collapse
Magisk Manager shuts down every time I want to add a module. I can only add the ones that you can download in the app.

Veran125 said:
Magisk Manager shuts down every time I want to add a module. I can only add the ones that you can download in the app.
Click to expand...
Click to collapse
Is the Magisk updated? Try to reinstall it or download it from official thread.

Gustavo_Jadson said:
Is the Magisk updated? Try to reinstall it or download it from official thread.
Click to expand...
Click to collapse
I needed a file manager(apart from the google one), that was the reason, so it was my bad. But now it works, thanks a lot. Any particular reason why you haven't used the rewritten version of V4A(2.7.0.1)?

Don't need it, got hardware Snapdragon audio + working on mi a2 lite

Veran125 said:
Magisk Manager shuts down every time I want to add a module. I can only add the ones that you can download in the app.
Click to expand...
Click to collapse
Have you enabled storage for magisk? That would cause a force close if it don't have permission

boe323 said:
Don't need it, got hardware Snapdragon audio + working on mi a2 lite
Click to expand...
Click to collapse
Give me link guy

Gustavo_Jadson said:
Hey guys! I created a Viper4Android version that doesn't breaks WIFI and/or Camera.
Other V4A versions needs to be uninstalled.
Link: https://drive google.com/open?id=1NCSuF9LH4XkZKSeFdYDo1Xh05Rb05Jxm
Jusp put the dot on the "drive google"
Install the zip as a Magisk Module
Click to expand...
Click to collapse
Great work. Are you planning to make the same module with the latest version of V4A?

Does this works for custom roms? Cause i've got bootloop when install it. I'm using crDroid rom

Jebreto08 said:
Does this works for custom roms? Cause i've got bootloop when install it. I'm using crDroid rom
Click to expand...
Click to collapse
Yes, it works

Google play protect says viper4android tried to bypass android security system. Uninstalled because of this.

well, v4a installs different libraries and drivers for the phone, ofc. google security is complaining about.
i mean it's like you try to install non certified drivers on your windows 10 pc, it won't let you do it unless u deactivated the security feature for it.

Running on AOSIP with DragonHeart kernel. There was no need to install audio library or audio patch. WiFi, Cameringo and MGCcam work correctly. Thank you.

dt2w is not working anymore after flashing it with magisk.

Gustavo_Jadson said:
Hey guys! I created a Viper4Android version that doesn't breaks WIFI and/or Camera.
Other V4A versions needs to be uninstalled.
Link: https://drive google.com/open?id=1NCSuF9LH4XkZKSeFdYDo1Xh05Rb05Jxm
Jusp put the dot on the "drive google"
Install the zip as a Magisk Module
Click to expand...
Click to collapse
I've just installed this module from Magisk menu, it installed correctly but no app on menu after restart, module appears on Magisk modules but no GUI app.
---------- Post added at 07:38 PM ---------- Previous post was at 07:31 PM ----------
Gustavo_Jadson said:
Hey guys! I created a Viper4Android version that doesn't breaks WIFI and/or Camera.
Other V4A versions needs to be uninstalled.
Link: https://drive google.com/open?id=1NCSuF9LH4XkZKSeFdYDo1Xh05Rb05Jxm
Jusp put the dot on the "drive google"
Install the zip as a Magisk Module
Click to expand...
Click to collapse
I've just installed this module from Magisk menu, it installed correctly but no app on menu after restart, module appears on Magisk modules but no GUI app.

boe323 said:
Don't need it, got hardware Snapdragon audio + working on mi a2 lite
Click to expand...
Click to collapse
Bro, can you link me up?