Related
Since there is only a thread for the Nillkin cases and tempered glass I thought it would be nice to have some thread for the accessories in general.
Until this day I tried 3 cases, two screen protectors (films) and two tempered glass protectors.
Case No. 1 ) Slim, silicone case http://www.ebay.com/itm/Transparent-Clear-Silicone-Slim-Gel-Case-For-Huawei-Honor-9/112446352466?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m2749.l2649 - Very slim and light case made from nice silicone BUT the protection when dropped would be none. It's not made 100% precisely and since it's silicone it doesn't look any good on the back where it creates bubbles. I've ordered this as the first case to have at least some protection. Nice thing is they include free screen protector but the quality isn't very good - doesn't cover the whole display (I'm not talking about edge-to-edge) and there are 2mm gaps on each side and when the display is on it looks terrible. 2/5
Case No. 2) Nillkin Super Frosted http://www.ebay.com/itm/For-HUAWEI-Honor-9-NILLKIN-Super-Frosted-Shield-Hard-Plastic-Back-Covers-Cases-/152596952252?var=&hash=item23877cb4bc:m:mtNLCAV-KRHaAK2TUOYLPTg - very nice case, really sturdy BUT I have few complaints - it's kinda slippery on the sides but this will go away after some use maybe and the bottom side around jack, charging port and speaker is a bit sharp and if you're holding the phone with the little finger on the bottom it't not really comfortable. Besides that it's really nice case for the price but I expected a bit more. But once again for the price it's more than OK. 4/5
Case No. 3) TPU Shockproof case with "carbon" http://www.ebay.com/itm/Luxury-Carbon-Fiber-Slim-Shockproof-Soft-TPU-Back-Case-For-Huawei-Honor-9-Magic/112325496837?ssPageName=STRK%3AMEBIDX%3AIT&var=412748326145&_trksid=p2060353.m2749.l2649 - as you can imagine, there is absolutely no carbon at all, just some kind of "sticker" or what it is. Nevermind, this case is the best of the three. Really nice case made from TPU, sturdy, should have the best drop protection and fits just perfectly. There is a small "rim" around the screen that should protect the screen from scratches when the phone is "face down". 5/5
Screen protector (film) No. 1) Nillkin Super Clear Protective Film - in terms of size the best screen protector I've had. Obviously it's not edge-to-edge but it does cover the whole display with gaps on the edges BUT the display is fully protected so thumbs up for me. In terms of "anti-fingerprint" it's nowhere close to the display or the back but is much better than some noname protector I've got with TPU case. Overall very nice screen protector for free but I'm still waiting for the Nillkin H+ tempered glass and some noname edge-to-edge tempered glass. 4/5
Tempered glass No. 1) Edge-to-edge blue 2.5D tempered glass http://www.ebay.com/itm/9H-2-5D-Full-Cover-Real-Tempered-Glass-Screen-Protective-Film-For-Huawei-honor-9/152593109357?ssPageName=STRK%3AMEBIDX%3AIT&var=452016649496&_trksid=p2060353.m2749.l2649 - really nice tempered glass (2 pcs) for the price. It has the adhesive only on the top, bottom and the sides but the application was very easy and the glass holds on even with any of tested cases. It has some "dots" in the screen area so I got no rainbow effect whatsoever. The blue color is a bit different from the original color od the phone but it's not a problem since you have your phone in a case. Overall for the price pretty good. 4/5
Tempered glass No. 2) Normal tempered glass Caliber (bought in CZE) - not edge-to-edge, doesn't cover the whole screen, gaps on the sides. Overall sh*t. 1/5
Still waiting for the Nillkin H+ tempered glass.
Nilkin Amazing H+ Pro is No Go
Got the 0.2mm H+ Pro. It's cover the display area for like 99%, with-out just about 0.5mm on each side, after all still the best.
BUT. The silicon layer doesn't hold the tempered glass on both sides, looks like the phone display curve started a bit earlier than its needed for the protector.
It doesn't stick to the display, making it looks like ****, with 3mm frame from each side. Top/bottom sides stick OK, all the way to edges.
So Nilkin Amazing H+ Pro is No Go for me.
Well, got it yesterday so I'm still waiting to try it but not sure if wan't to :laugh:
cases
sooooo, I bought these from tvc mall. They were so cheap that I bought three different ones with the intent of disposing of whichever were poor. Thing is, they are all good in their own way. The plain bumper is just very slimline. The rugged looking one is cool as it has a stand in landscape mode, and the wallet is exceptional quality, given the price. All three fit perfectly, but the plain bumper makes the power and volume buttons so much more tactile. The rugged one looks really cheap in silver, perhaps black would have been a good choice. As i wasn't expecting much from the wallet one, I also oredered the nilkin wallet but that hasn't arrived yet.
https://www.tvc-mall.com/details/dr...r-9-auspicious-dragon-black-sku10174840d.html
https://www.tvc-mall.com/details/fo...casing-with-kickstand-black-sku10174919a.html
https://www.tvc-mall.com/details/ma...ot-for-huawei-honor-9-black-sku10175044a.html
https://www.tvc-mall.com/details/ni...se-for-huawei-honor-9-black-sku10174916a.html
I have also ordered the ultimate sheild screen protector, which is edge to edge, in black as I think it will make an excellent contrast to the silver rear of the handset....which wont be visible when the (absolutely necessary) bumper is fitted!
Ultimate sheild screen protector
.... And the ultimate sheild protector turned up. It is excellent. A word of caution, unless this is fitted absolutely perfectly, it will render one or both of the capacitance keys inoperable. This happened to me as i fitted the sheild a fraction of a millimetre to the right. I carefully removed and replaced it with more accuracy.
Here is a pic of the black sheild fitted to my silver H9, and a photo of the plain bumper fitted from my previous post. Svelt but rugged!
After a couple of hours of use I can say that there has been no loss of sensitivity on the screen or capacitive buttons, but on darker details and the blacks, it does look like the screen is behind a sheet of glass. You will know what i mean if you have used a screen protector which bonds over its entirety, whereas this one has a mild adhesive at the top and bottom of the protector, where the bezels are. A small price to pay i think to protect my new device. It is mostly noticeable in bright light, not so much in low light. And I love the new black look of the bezels with the silver fingerprint sensor still visible.
Right, so, some more hours on....the ultimate sheild has begun to show its flaws. Towards the middle of the screen there is now what i can only describe as a "woodgrain" effect. This could be caused by tiny amounts of moisture getting between the screen and protector, which I guess there is nothing to stop that happening. They offered a refund for dissatisfaction so I guess I will be chasing that up. Pfffft. So disappointed.....
Is there a smart cover for it ?!
Just bought the TPU Shockproof case and it is amazing! It's a very good quality and it doesn't makes the phone feel like a toy.
I really like it and definitely recommend it!
NotoriousNick said:
Just bought the TPU Shockproof case and it is amazing! It's a very good quality and it doesn't makes the phone feel like a toy.
I really like it and definitely recommend it!
Click to expand...
Click to collapse
Can you upload a photo of the phone with the case applied?! That would be awesome
The nilkin "sparkle series" wallet turned up. Its awful. Unlike the cheap wallet I purchased, which remains closed under magnetism, the nilkin just falls open and feels poorer quality.
The Ipaky bumper with the clear perspex back is, however, very nice. The only caveat, it sits flush with the screen so offers no protection if you decide to place your device screen down.
I'm waiting for the smart cover case, if it didn't come fast, I'll go with a skin.
I have bought an honor 9 few days ago. Somebody could suggest me a screen protector that cover whole display? With 3D display is so difficult find a good screen protector....
danygold95 said:
I have bought an honor 9 few days ago. Somebody could suggest me a screen protector that cover whole display? With 3D display is so difficult find a good screen protector....
Click to expand...
Click to collapse
Here you go
https://www.ultimateshield.co.uk/collections/honor-9
PalakMi said:
Here you go
https://www.ultimateshield.co.uk/collections/honor-9
Click to expand...
Click to collapse
Thanks.
I don't like this type of tempered glass (i know that is the only solution for cover 3d display without space).
So, someone has tested "invisible film screen protector"?
danygold95 said:
Thanks.
I don't like this type of tempered glass (i know that is the only solution for cover 3d display without space).
So, someone has tested "invisible film screen protector"?
Click to expand...
Click to collapse
I didn't test, I will try it once I get my honor 9
PalakMi said:
I didn't test, I will try it once I get my honor 9
Click to expand...
Click to collapse
:good:
If someone else has tried this protective film, please give us a feedback.
Did someone try the Mofi screen protector? According to a review on Aliexpress it has minimal space at both sides.
I've seen ones from ultimate shield, I'm considering getting one.
PalakMi said:
I've seen ones from ultimate shield, I'm considering getting one.
Click to expand...
Click to collapse
Good luck with that. Did you read my earlier post? As the protector does not actually sit on the screen, due to the adhesive around the edges, it is susceptible to the "rainbow effect" which i think is caused by humidity between screen and protector. It seemed to manifest itself after the phone had been in my pocket and warmed up. I don't have an overly sweaty crotch.....
Anyhow, they apologised and promptly sent a replacement and the same happened again.
By all means give it a go and they will refund you without issue.
Hi guys so the screen protector hunt starts again ive been looking on amazon uk and some of them seem to be a full adhesive fit does anyone know if the xz2 has flat glass near the main display or is it 2.5D like most models
hear is one ive been looking at https://www.amazon.co.uk/Protector-...6&sr=8-7&keywords=xperia+xz2+screen+protector
On the same hunt, the glass is definitely 2.5D. I wouldn't expect any full adhesive glass protectors to work without massive halo's.
Goronok said:
On the same hunt, the glass is definitely 2.5D. I wouldn't expect any full adhesive glass protectors to work without massive halo's.
Click to expand...
Click to collapse
nightmare isnt it ive had loads of phones lately and everyone has been rubbish id be happy with a good film protector along as its crystal clear but even them seem to have a snowy effect
the Girlfriends iphone 8 plus is the last decent protector ive seen
I’ve ordered
Beyeah??
Will give you an update once I get the phone! Got to wait until 5th April! ?
well just received my xz2 and tired these https://www.amazon.co.uk/Newzerol-D...7&sr=1-8&keywords=xperia+xz2+screen+protector
there okish nice and clear but dont fit too well and at the top and bottom the dont seem to be sticking all too well
anyone had any luck with any more?
thanks
I buy iVoler tempered glass from amazon ita, are warranty life...when will arrive i'll check the description
Edit: iVoler tempered glass for xz2 are very bad, halo in all 4 sides
Zazzinho said:
I buy iVoler tempered glass from amazon ita, are warranty life...when will arrive i'll check the description
Edit: iVoler tempered glass for xz2 are very bad, halo in all 4 sides
Click to expand...
Click to collapse
I bought these
https://www.amazon.co.uk/dp/B07BHLGSBT/ref=cm_sw_r_sms_apa_QVp0Ab7M39G0D
Fitted nice and stuck quite well and no halo till you touch the display then hallo everywhere but they gradually disappear once left alone
God I hate the whole screen protector problems the gf has a iPhone 8 plus bought one went on full adhesive not problems looks crystal clear :crying:
brockyneo said:
I bought these
https://www.amazon.co.uk/dp/B07BHLGSBT/ref=cm_sw_r_sms_apa_QVp0Ab7M39G0D
Fitted nice and stuck quite well and no halo till you touch the display then hallo everywhere but they gradually disappear once left alone
God I hate the whole screen protector problems the gf has a iPhone 8 plus bought one went on full adhesive not problems looks crystal clear :crying:
Click to expand...
Click to collapse
1 hour ago i've seen the brotect airglass, how are this screen protector?
Edit: finally today it's arrived brotect airglass, first time i've buyed and it's arrived a back screen protector for s9+ in xz2 package (???), contact the support and they send me a new for free and it's arrived today...no halo, great brightness and very good oleophobic treatment
i think they all seems to be lying on us... they advertise it as a 3D or full cover edge to edge but when you get your hands on it you realize it only protects the LCD, like flat protector...
well, i like this by IMAK... it's a 3D and full edge to edge film rather than tempered glass... what i don't like about it is not glossy, but rather anti-glare which i hate.
check the link below if anyone is interested in buying it
https://www.ebay.com/itm/For-Sony-X...var=552691546263&_trksid=p2055119.m1438.l2649
I bought this one, fits edge to edge very well.
https://www.amazon.co.uk/dp/B07B3XGHDV/ref=cm_sw_r_em_apa_i_ZWe8AbT6KPEVK
brockyneo said:
Hi guys so the screen protector hunt starts again ive been looking on amazon uk and some of them seem to be a full adhesive fit does anyone know if the xz2 has flat glass near the main display or is it 2.5D like most models
hear is one ive been looking at https://www.amazon.co.uk/Protector-...6&sr=8-7&keywords=xperia+xz2+screen+protector
Click to expand...
Click to collapse
this should look amazing, also it does protects the sides....
take a look
https://www.ebay.com/itm/Xperia-XZ2...-Full-Coverage-3Pack-Clear-Flim-/302707711634
here is the perfect case that match it
https://www.ebay.com/itm/Sony-Xperi...&itm=601568981187&_trksid=p5411.c100167.m2940
Does plastic screen protector protects your phone from falls and prevents shattering like the glass ones?
I bought this one but was rubbish bad rainbow affect and started coming off withing a week https://www.amazon.co.uk/dp/B07BHLGSBT/ref=cm_sw_r_sms_apa_i_5VY8Ab1MD67AR
But bought this one https://www.amazon.co.uk/dp/B07BPRBRPT?ref=yo_pop_ma_swf
Works perfect crystal clear and stuck well at the edges been 2 weeks and still looks new and case friendly
AlvinZahran98 said:
Does plastic screen protectors protect your phone from fall and prevents shattering like the glass ones?
Click to expand...
Click to collapse
It prevents glass breaking by 30%.
Or was it 70%?
But it definitely strengths the glass structure.
MartinX3 said:
It prevents glass breaking by 30%.
Or was it 70%?
But it definitely strengths the glass structure.
Click to expand...
Click to collapse
So it is safe to use, as safe as when I use a glass screen protector?
AlvinZahran98 said:
So it is safe to use, as safe as when I use a glass screen protector?
Click to expand...
Click to collapse
I prefer a thick glass screen protector.
It will easily avoid bubbles and is way stronger.
MartinX3 said:
I prefer a thick glass screen protector.
It will easily avoid bubbles and is way stronger.
Click to expand...
Click to collapse
Okay, I always use a glass screen protector too. But, it is a nightmare to find a good glass screen protectors for this phone.
AlvinZahran98 said:
Okay, I always use a glass screen protector too. But, it is a nightmare to find a good glass screen protectors for this phone.
Click to expand...
Click to collapse
I use this one.
I hope you like it.
https://www.wigento.de/smartphone/s...sony-xperia-xz2-schutz-huelle-neu/a-42519990/
I recommend this:
https://www.gadgetshieldz.com/sony-xperia-xz2-screen-protectors-cases-covers-skins.html
Fits perfectly and the smoothness is like glass!
Dont buy this particular type of glass on aliexpress (this is my first bad buy here, others that i ordered for diferent models were worth it) it seems to be problem with this one... i have bad connection in middle of screen 3 cm vertikal (no air bubble, just pad materials on protective glass
https://www.dropbox.com/s/yxu55ssg7vig4xi/Screenshot_20180618-075151.png?dl=0
These new tempered glass protectors with the black surround adhesive are terrible. Poor touch sensitivity and a weird hollow feel/sound because they don't actually sit flat on the screen. Are there any non-adhesive tempered glass protectors that are worth looking into? Amazon reviews are spotty. for every brand and every type of protector for the G8.
Alexsha said:
These new tempered glass protectors with the black surround adhesive are terrible. Poor touch sensitivity and a weird hollow feel/sound because they don't actually sit flat on the screen. Are there any non-adhesive tempered glass protectors that are worth looking into? Amazon reviews are spotty. for every brand and every type of protector for the G8.
Click to expand...
Click to collapse
I use these no real complaints GPEL Screen Protector for LG G8... https://www.amazon.com/dp/B07QHF8BSV?ref=ppx_pop_mob_ap_share
caligood3 said:
I use these no real complaints GPEL Screen Protector for LG G8... https://www.amazon.com/dp/B07QHF8BSV?ref=ppx_pop_mob_ap_share
Click to expand...
Click to collapse
Sticky surround and leaves an air gap between the screen and protector. Also, 50% of the reviews are poor.
Alexsha said:
Sticky surround and leaves an air gap between the screen and protector. Also, 50% of the reviews are poor.
Click to expand...
Click to collapse
I'm using it right now & it's fine with a case but whatever
caligood3 said:
I'm using it right now & it's fine with a case but whatever
Click to expand...
Click to collapse
The air gap doesn't annoy you? And the loss of touch sensitivity?
Alexsha said:
The air gap doesn't annoy you? And the loss of touch sensitivity?
Click to expand...
Click to collapse
I don't notice it it's pretty close to the screen if you ask me & screen sensitivity is about 98% also our g8's have a feature to increase screen sensitivity when using a screen protector idk if you knew that
caligood3 said:
I don't notice it it's pretty close to the screen if you ask me & screen sensitivity is about 98% also our g8's have a feature to increase screen sensitivity when using a screen protector idk if you knew that
Click to expand...
Click to collapse
Tried that and it still doesn't feel right.
I'm thinking of trying a film protector like Ringke. I've also got all these on the way:
https://www.amazon.com/gp/product/B07QSPLMPG
https://www.amazon.com/gp/product/B07Q1HZCXN
https://www.amazon.com/gp/product/B07SDM2JX7
Alexsha said:
Tried that and it still doesn't feel right.
I'm thinking of trying a film protector like Ringke. I've also got all these on the way:
https://www.amazon.com/gp/product/B07QSPLMPG
https://www.amazon.com/gp/product/B07Q1HZCXN
https://www.amazon.com/gp/product/B07SDM2JX7
Click to expand...
Click to collapse
Post how they turn out maybe I'll try them in the future
Tried this 32nd Extra Armoured Tempered Glass Screen Protector which is equivalent to the GPEL and seems to be alright but the adhesive isn't great I managed to move the screen protector out of position by a little force. Probably may to consider ones with full adhesive...
amFilm protector
Used these on my wifes pixel 2 and they are great. You get a free one if it breaks.
My new g8 has one. it comes with a jig to be sure it lines up perfect. curves on the edges and extremely good fit. No issue with the case.
https://www.amazon.com/gp/product/B07QDVJNR2/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1
FJ40dan said:
Used these on my wifes pixel 2 and they are great. You get a free one if it breaks.
My new g8 has one. it comes with a jig to be sure it lines up perfect. curves on the edges and extremely good fit. No issue with the case.
https://www.amazon.com/gp/product/B07QDVJNR2/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1
Click to expand...
Click to collapse
Gonna try after I run through my 2 gpels lol just put one on should be good unless I drop it awkwardly then it's on to the 2nd one
Using the LK film protector I linked earlier. Goes on like the ringke film, using multiple steps and doing 1/2 at a time. Feel is good. A little stickier than a tempered glass protector, but it's solid on the screen. No air gap. I think it might be interfering with the crystal sound display a bit. Volume seems a little lower now.
Alexsha said:
Using the LK film protector I linked earlier. Goes on like the ringke film, using multiple steps and doing 1/2 at a time. Feel is good. A little stickier than a tempered glass protector, but it's solid on the screen. No air gap. I think it might be interfering with the crystal sound display a bit. Volume seems a little lower now.
Click to expand...
Click to collapse
I have several of the Ringke stocked up, they have a great installation process. I personally enjoy the film (dry application) protectors more than glass as they have a much slimmer profile. The downside is that they offer little impact protection and can be imprinted, but they're cheap enough that I just keep a few around and change them as needed.
This was the only full-adhesive glass protector I could find. DON'T buy it! I left pics in my Amazon review showing why: Our screen glass curves before the pixels end. The only way to have a flat piece of glass stick to the whole screen is to cut it smaller than the visible screen edges. This one hangs off the sides by 3mm, rendering the edges useless.
[2 Pack] LG G8 ThinQ Screen... https://www.amazon.com/dp/B07NZZ6YGY?ref=ppx_pop_mob_ap_share
I've just ordered the only one I could find that claims to be smaller than the screen area, but the description still makes it a bit tough to know what to expect.
https://www.amazon.com/Compatible-Protector-Coverage-Tempered-Adhesive/dp/B07QJ41M2H
Update: DON'T BUY THESE. This one is even worse, as it's way too tall. Again, the scroll bars don't work because you can't touch them. Total trash.
Unfortunately, unless they make one with genuinely curved glass that follows the screen, there won't be a useful full-adhesive protector for our phone. It looks like every glass protector is flat. They advertise rounded edges, but are still flat glass. If you don't believe me, please look at the pictures I've left in the Amazon reviews. These should never have been made.
Tempered glass is used to protect the screen from scratches and also Protect direct damage of the screen. any branded Tempered Glass is famous with their Hard surface and smooth working. I always prefer Casper Tempered Glass and Whitestone dome Glass.
Add this one to the list of screen protectors that don't work. It won't lay flat on the sides. Long air gaps up/down both sides.
Here's the item description on Amazon. I can't post links yet.
J&D Compatible for 3-Pack LG G8 ThinQ/LG G8 Glass Screen Protector, [Tempered Glass] [Not Full Coverage] Ballistic Glass Screen Protector for LG G8, LG G8 ThinQ Screen Protector - Not for LG G8S ThinQ
by J&D
Full Body Skin
You may want to think about giving the Skinomi Full Body Skin a try. I wouldn't say that it feels as smooth as a glass protector, but it does wonders at protecting the back of the phone. It also keeps it from slipping off of surfaces and easier to hold! Very nice for those times when you don't want to wear a case. The back protector doesn't interfere with any cases, and the front protector covers the entire screen of the device. Skinomi's warranty is pretty legit too.
I've used it on my Nexus 4, v30 and now the G8.
I'm using an AILUN screen protector with a SPIGEN TOUGH ARMOUR case and they fit and work perfectly together. Got them both off EBay.
I was wondering if screen protectors might dull the sound, since the screen itself is a speaker.
I just placed the wet install IQ Shield on my new G8. I haven't even turned it on yet as I'm in a contract on a stupid Note 9,but I like them on my last 4 devices.
I bought an Edge to Edge tempered glass from good mobile accessory shop and got it fitted in my Mi10 by a professional technician there itself.After a week or so there developed one or two air bubbles in the screen and they began to grow big covering half of my screen.So I approached the shop again and they repalaced the glass with a new one.After about 2 weeks there began to develop air bubbles again and they growing in size gradually.My had not dropped anywhere from me or others.So what is the reason for this?If I replace the tempered glass with a Screen Protector film,can the developing of air bubbles be completely prevented?Aso will this actually protect the phone screen glass from breaking in the event of a fall?Can anyone suggest a good quality Tempered glass and good quality Scree Protector Film?
pnsdhrn said:
I bought an Edge to Edge tempered glass from good mobile accessory shop and got it fitted in my Mi10 by a professional technician there itself.After a week or so there developed one or two air bubbles in the screen and they began to grow big covering half of my screen.So I approached the shop again and they repalaced the glass with a new one.After about 2 weeks there began to develop air bubbles again and they growing in size gradually.My had not dropped anywhere from me or others.So what is the reason for this?If I replace the tempered glass with a Screen Protector film,can the developing of air bubbles be completely prevented?Aso will this actually protect the phone screen glass from breaking in the event of a fall?Can anyone suggest a good quality Tempered glass and good quality Scree Protector Film?
Click to expand...
Click to collapse
It will offer some protection but if the phone lands a certain way the screen is going to crack regardless of what you've got on.
I just used a basic film one but the fingerprint is a bit crap. Glass ones never fitted right.
Hey you can try using Siege Glastimate+ for Galaxy S20+. It's a UV glue tempered glass. Price is quite high but it is really case friendly tbh bc im using the glass with my Ringke Fusion-X casing with no problem. And also the tempered glass has no touch issues whatsoever bc it is a UV glue not like normal tempered glass with edge only glue. And for the back panel I'm using a cheap carbon fibre sticker to avoid scratches haha
I bought the one from *******.. to much of my surprise it actually is quite good.
Installation was easy with an included guide/holder. The film has 2 parts that lets you apply the top half first then the bottom.
It's super thin, like what you'd see from the factory. The TPU film is also really smooth.
(Not affiliate link)
https://www.amazon.com/*******-Protector-Display-Fingerprint-Support/dp/B085DB4T83
Not sure why it's putting *** in place of the brand name
Did you test Spigen? The one applied from default is really poor, it is scratched very easily
tlxxxsracer said:
I bought the one from *******.. to much of my surprise it actually is quite good.
Installation was easy with an included guide/holder. The film has 2 parts that lets you apply the top half first then the bottom.
It's super thin, like what you'd see from the factory. The TPU film is also really smooth.
(Not affiliate link)
https://www.amazon.com/*******-Protector-Display-Fingerprint-Support/dp/B085DB4T83
Not sure why it's putting *** in place of the brand name
Click to expand...
Click to collapse
Did any of you found a good screen protector that is case friendly? I want to use it with a Spigen case. Thanks!
Hi,
can someone suggest me a screen protector for xperia 5 II that covers the whole display?
I read a lot of reviews about screen protectors that are smaller than the screen due to the curved edges.
Actually I have a Spigen that covers the whole screen, but I want to try a new one.
Thanks in advance
The one i have covers the full screen but the touch sensitivity at the sides are bad. Looking for recommendations for full screen that does not affect the side sensitivity.
viperc said:
The one i have covers the full screen but the touch sensitivity at the sides are bad. Looking for recommendations for full screen that does not affect the side sensitivity.
Click to expand...
Click to collapse
I use one made by polish company, its also not a glass one so you might not fancy it, but it has some cool stuff to it, like self regeneration(it kinda does that), 99% germ cancelling(confirmed by some polish government company, and tested by some european one with certificates) its sleek and doesnt change colors nor does it interfere with touch, the protector is 3mk SilverProtection+ im darn happy with it, but it might be hard to get outside Poland, although still worth a try. I also use spigen clear armor case
MasterDomino said:
I use one made by polish company, its also not a glass one so you might not fancy it, but it has some cool stuff to it, like self regeneration(it kinda does that), 99% germ cancelling(confirmed by some polish government company, and tested by some european one with certificates) its sleek and doesnt change colors nor does it interfere with touch, the protector is 3mk SilverProtection+ im darn happy with it, but it might be hard to get outside Poland, although still worth a try. I also use spigen clear armor case
Click to expand...
Click to collapse
Thanks. I will prefer glass type screen protector still. I have used something similar in the past from phantom skinz.
I'm using the Gorilla IQ Sheild on my Note 10+ which has a curved screen. It's an inexpensive fairly easy wet apply urethane that's very durable. This one has been on for about 8 months... that amazes me. Zero issues.
Unfortunately I don't think one is available yet for your model... I may be wrong.
Sony Phones
Sony Phones - IQ Shield protectors offer unmatched protection against scratches, dirt, dust and wear damage for your Sony Phone. IQ Shield screen protectors and full body skin protectors are accurately designed so that they can perfectly cover the vital areas of your Sony Phone that require...
www.iqshield.com
Make sure you use a case that protects against faceplants and corner hits. I've been using the Zizo Bolt for over a year. No damage in spite of at least 6 drops on concrete.
baronebirra said:
Hi,
can someone suggest me a screen protector for xperia 5 II that covers the whole display?
I read a lot of reviews about screen protectors that are smaller than the screen due to the curved edges.
Actually I have a Spigen that covers the whole screen, but I want to try a new one.
Thanks in advance
Click to expand...
Click to collapse
I got this from amazon japan
Amazon.co.jp: iPhone se2 Glass Film, Blue Light, iPhone 2nd Generation Protective Film, iPhone SE2 Film, Tempered Glass, Anti-Fingerprint, No Bubbles, No Interference, Easy to Install, 9H : Electronics
Amazon.co.jp: iPhone se2 Glass Film, Blue Light, iPhone 2nd Generation Protective Film, iPhone SE2 Film, Tempered Glass, Anti-Fingerprint, No Bubbles, No Interference, Easy to Install, 9H : Electronics
www.amazon.co.jp
I got the Supershieldz Glass cover through Amazon. I've been using it for four days and it's amazing. I've had to wipe the screen once in four days. I have a camera case, of course, and I can't feel a gap between the case and the cover but if I slip a fingernail in I can find a small gap.
141ptkelly said:
I got the Supershieldz Glass cover through Amazon. I've been using it for four days and it's amazing. I've had to wipe the screen once in four days. I have a camera case, of course, and I can't feel a gap between the case and the cover but if I slip a fingernail in I can find a small gap.
Click to expand...
Click to collapse
How's the side sensitivity with the screen protector? Still trying to find one that doesn't affect the side sensitivity.
It seems to be working fine. I can swipe to go back to the previous screen.
Hi,
I had recently bought this phone and currently looking for a film protector for the screen. Which one do you suggest?
Thanks in advance.
steffanos said:
Hi,
I had recently bought this phone and currently looking for a film protector for the screen. Which one do you suggest?
Thanks in advance.
Click to expand...
Click to collapse
See my above post. Wet apply is the best way to go. My current one is over 8 months old.
Little wear for the amount of use it's seen.
When I get around to it I'll slam a new one on... at $5 a pop.
I've found it on their website. Though there are 2 variants:
-LIQuid Shield™ Sony Xperia 5 II Screen Protector
-IQ Shield Matte™ Sony Xperia 5 II Screen Protector
Do you use regular one or matte?
steffanos said:
I've found it on their website. Though there are 2 variants:
-LIQuid Shield™ Sony Xperia 5 II Screen Protector
-IQ Shield Matte™ Sony Xperia 5 II Screen Protector
Do you use regular one or matte
Click to expand...
Click to collapse
I've never used the matte finish.
I have a Note 10+ with the curved screen and it works well. It should be no problem at all with a flat screen. Pay attention to letting it adhere properly at first. I waited about 6 hours but it was hot.
(2-Pack) LiQuid Shield - Sony Xperia 5 II Screen Protector
(2-Pack) LiQuid Shield - Sony Xperia 5 II Screen Protector - We are constantly coming up with new ways to keep our electronic devices protected. While our IQ Shield is designed specifically for flat screen surfaces, we’ve also engineered a film that is able to completely cover your entire Sony...
www.iqshield.com
Because for matte they state it's anti-glare and better generally with fingerprint marks (not visible).
Thanks for the help. If the rest have something else, be free to recommend.
steffanos said:
Because for matte they state it's anti-glare and better generally with fingerprint marks (not visible).
Thanks for the help. If the rest have something else, be free to recommend.
Click to expand...
Click to collapse
You simply wipe it occasionally with a dry microfiber cloth; fingerprints aren't an issue.
viperc said:
How's the side sensitivity with the screen protector? Still trying to find one that doesn't affect the side sensitivity.
Click to expand...
Click to collapse
I haven't noticed a problem but I normally don't have it turned on.
AOLANDER för Sony Xperia 5 II 2020 skärmskydd härdat glas, 9H hårdhet HD premium filmskydd【3 PACK】 : Amazon.se: Elektronik
AOLANDER för Sony Xperia 5 II 2020 skärmskydd härdat glas, 9H hårdhet HD premium filmskydd【3 PACK】 : Amazon.se: Elektronik
www.amazon.se
Good value, seem to do its job.
Covers the flat part of the screen there is a a gap - as expected.
If you do not fit it perfectly, there may be a part that is not glued to the screen.
Quality seem good, maybe a little sharp edges.
I got what I expected, it may not be what you want though.
The fullscreen protectors are hard to fit and come off more easily. Some cases are hard to use with fullscreen protectors too (and I take off the case often).
The protector in combination with a Caseology Vault makes it harder to side sweep and to use side sense. Sensitivity for side sweep should be set to highest. I am not happy with this.