xposed for Oreo! - OnePlus 3 Questions & Answers

Anyone tried Xposed on Oreo?

Yup, tried on my OP3 Oreo 8.0.
It's as awesome as before. Only a couple of complaints though -
1. Safetynet check can not be verified while xposed is active, this doesn't let few apps to work. One workaround is, to disable xposed, restart the phone and then to install and login to such apps. Afterwards, activate xposed and restart your phone again. This is tedious. However, it works. Not everytime, though - to use apps such as Zebpay, you always need your xposed to be disabled. This can be managed, but, again, tedious task.
2. OneTap download isn't working!
I was such a fan of this module. Unfortunately, it doesn't work in my OP3. I've tested the module, and just in case any of you have suggestions on how to make it work, do let me know. Till then, I'll better wait for a new release of the module.
These points are my opinions/feedback about xposed on oreo 8.0 on OP3. However, I love XPOSED and I'm totally in love with android because of the tweaks XPOSED has got to offer.

Related

Anyone have root and xposed working like a charm?

I have heard xposed having lag and battery issues with the grace UX. Anyone have xposed working fine?
Thanks
Brava27 said:
I have heard xposed having lag and battery issues with the grace UX. Anyone have xposed working fine?
Thanks
Click to expand...
Click to collapse
Not sure if Xposed is causing my lack of deep sleep (it wasnt linked to Xposed when I had the same problem after rooting my Note 5..), but everything else seems to be perfect. Mind you, I'm using the N930W8 with Sprint's userdebug, rooted, but all is good! Just have to pin down this battery draining problem.
Does anyone have root and xposed working fine on N930F or N930FD?
EasyWorld said:
Does anyone have root and xposed working fine on N930F or N930FD?
Click to expand...
Click to collapse
Nope hardly not, I tried more than 2 days on the N930F for Xposed (FD is same firmware apparently). Wanams, Official, Systemless Magick. I think it might have to do with Samsung's new OS Grace updates or the fact of encyption. Who knows? Unless someone makes special changes to Kernel or Wanam's Xposed, it will be very hard.
I'm not telling you this for simple fact, Hydra-Rom (Not sure) might be getting closer with own kernel and no doubt that at least some development will happen when Wanam and Chainfire get a Note 7. So my advice is to wait out, backup with titanium backup now that SuperSu works.
And wait until that sweet day or month comes and behold the glory. At least, it's not a Priv in security lockdowns.
EasyWorld said:
Does anyone have root and xposed working fine on N930F or N930FD?
Click to expand...
Click to collapse
Don't take me on my word for this but booting with the latest Hydra Rom 1.15 and it's kernel, Xposed at least so far works without lag and start boot optimization. (Wanam's and N390F)
Haven't fully test Kernel or Xposed Modules (Like 3+) but seems to be going better than super lag or battery death. (New Kernel disabled encryption)
Again, might be something looking into.
EDIT 1: Was working quite well, enabled some modules like Greenify and XinternalSD. Seems like bootloop now affecting my phone, either enabling one of these modules with some settings bootlooped my phone or xposed is simply not just ready yet. Either ways, the very fact that no optimization was needed at the start (Rebooted tons of times to make sure) is progress.
EDIT 2: Don't know what I did, but just manually shut down phone and Phone booted up. I sense some lag (Might be placebo) but Xposed is working. Along with more SuperSu apps not crashing, again I reckon because Kernel disable encryption allowing mounting of /data. If you have the time, try out the new rom with kernel, seems to be getting closer.

Issues with Xposed on latest Update

Hello guys
I'm experiencing the following issue:
I am trying to install the latest Oxygen OS update on my OP3 (talking about 3.2.8). I can do so and at first it works fine, but as soon as I activate Xposed (not the framework itself, that's no problem at all. It's appearently ANY module that needs to be activated) the booting process doesn't finish and I get stuck on boot-animation-screen. Has anybody experienced the same issue or even found a way to fix it?
Also, the Xposed Uninstaller ZIP doesn't seem to work on the OP3. It failes. And any time I want to try again I need to restore a hole Nandroid. Is that a known (or fixed) issue?
Here's some backround info:
- It's not just my phone, same issue on my sister's
- Root and Xposed framework themselves are no problem. Issue starts when activating any Xposed-module
- Xposed worked flawlessly on previous version
- I tried it several times
Would really appreciate any feedback, even just if it's a known issue!
Thanx
What xposed version are you using?
Use xposed v87 , it will work fine then
Or you can try the systemless xposed.

Packet installer continuously FC?!

I'm on this condition: stock retail Nougat, stock retail kernel, TWRP installed, rooted with SuperSU, BusyBox installed and Xposed too.
All works fine on my phone... with a little exception: Packet installer.
When I go to install any APK directly (untrusted sources...) like from Aptoide (with its root installation disabled), from Xposed or from file system I got continuos FC of "packet installer" and installation is not possible.
I've overcome this installing apks from ES file explorer or by some APK installer present on Play Store, BUT both of them need to be used externally as stand alone apps and can't be called directly from, e.g. Xposed or Aptoide.
Both this solution after a first different installation starting, use stock Nougat installer, so the FC should be connected to how installations are called by apps...
I've tried A LOT of solution (clear data, cache, update to v.7.1.2 packet installer, disable & re-enable unknown sources, etc...) but none seems able to fix this little annoying issue...
Any ideas?
Do you have this issue too?
Seems like either Xposed modules or any form of putting mods together caused that. Sadly I don't use Xposed due to piracy reasons. But I would start removing mods untill it works for you
joemossjr said:
Seems like either Xposed modules or any form of putting mods together caused that. Sadly I don't use Xposed due to piracy reasons. But I would start removing mods untill it works for you
Click to expand...
Click to collapse
I have very few Xposed MODs installed... I could give it a try with no prob... but I'm not so convinced about a result...
joemossjr said:
Seems like either Xposed modules or any form of putting mods together caused that. Sadly I don't use Xposed due to piracy reasons. But I would start removing mods untill it works for you
Click to expand...
Click to collapse
You were absolutely right! :cyclops:
I've found it was an Xposed module causing the FCs!
This one to be exact: https://forum.xda-developers.com/xposed/modules/mod-xhfw3-floating-windows-t3371074
Weird is that nor calling app neither Packet installer were set to use its windows features and even blacklisting packet installer from XHFW3 doesn't stop FCs... only fully disabling the module does!
Anyway... thanx a lot!

apps crash few times a day

Every since i rooted my pixel 2 xl and installed magisk random apps crash at random times few times a day and i can't seem to figure out how to fix it, I've tried disabling xposed and magisk and all of their modules... Is there anyone else with same problem or someone that knows how to fix it
I get the same issue with a pop up saying "___ has stopped" with a send feedback option.
The apps always seem to work and I thought it was probably because of Xposed so I didn't think anything of it, until you mentioned disabling Xposed and you still have the issue :/
Leads me to believe it may not be Xposed for myself as well
Yeah i don't think it's xposed because i rooted my phone and went like a week before installing xposed but even before xposed apps were still crashing and i have 1 magisk module but i disabled it and still the same, i updated to latest xposed and nada

magisk + xposed problem

Hi all,
I have installed Magisk 16.0 based on Maik93's post, and Xposed Framework SDK27 90.2-beta3 (Systemless), through Magisk modules.
When I enable the Xposed module, the phone first shows endless boot animation, and when restarting it again, it boots, but the Xposed app seems not installed (not listed in Settings->Apps and its icon is not present in chooser), although, in Magisk, it is visible in the Modules and it's checkbox is checked.
Did anybody successfully installed Xposed with A2 Lite? What can be the problem?
Thanks a lot,
Circum
Did you install the apk of xposed?
---------- Post added at 11:51 PM ---------- Previous post was at 11:46 PM ----------
https://forum.xda-developers.com/attachment.php?attachmentid=4393082&d=1516301692
Here is the link from xda
No, sorry, I was not aware that it is a separate thing.
Now I have installed, but it says that no Xposed Framework is installed. If I try to install a framework from inside the installer (90-beta3), it -- obviously -- reports an error that /system/framework/XposedBridge.jar already exist...
Because of this, I cannot enable any module from Xposed Installer.
Any tips what do I do wrong?
I want to use Xposed too but we will have to wait for TWRP I guess.
Not sure what happened to you, did you tried ti reboot your phone? Mine is working just fine
mik.y said:
I want to use Xposed too but we will have to wait for TWRP I guess.
Click to expand...
Click to collapse
You can install now through Magisk if you want, if yiu get bootloopbfor any xposed module, just flash thr original boot.img
HoangP05 said:
You can install now through Magisk if you want, if yiu get bootloopbfor any xposed module, just flash thr original boot.img
Click to expand...
Click to collapse
I was able to install it somehow,but stuck after each reboot in process. Now some apps are diying like call enhancement and some test app. So its quite dirty. I have Magist 16.0 installed.
Lol,I cant connect to internet with xposed to download any module. Useless
mik.y said:
I was able to install it somehow,but stuck after each reboot in process. Now some apps are diying like call enhancement and some test app. So its quite dirty. I have Magist 16.0 installed.
Lol,I cant connect to internet with xposed to download any module. Useless
Click to expand...
Click to collapse
Not all are working apparently, but if it is bootloop, you so try to let it boot again, press power and volume down as the same time while it bootloop, the second boot always work for me
There is TWRP for Mi A2 Lite.
Search on google.
NOTICE: For now there isn't official TWRP. There'w unofficiak fork which can you install using fastboot. :good:
Not sure what happened, AFAIK I have rebooted the phone at least once, but after rebooting again, it said that the framework is installed, but has some problem with it and not functioning (yellow background, sorry, I forgot to take a screenshot), and rebooting once again solved the problem, I can confirm that Xposed works.
But as others mentioned, installing Magisk itself makes problems with the boot. Booting always stucks, I always needed (even before installing Xposed) to long-press power after several minutes and the second try usually boots up.
Now having Magisk and Xposed (and GravityBox) installed usally need to restart booting twice (i.e., the 3rd boot works).
Any suggestions how to debug / get logs about this problem?
HoangP05 said:
Not sure what happened to you, did you tried ti reboot your phone? Mine is working just fine
Click to expand...
Click to collapse
Xposed's Gravity box module works on Mi A2 lite?
Yes, GravityBox is working, although as I mentioned, there are issues with boot - I have to reboot several times until it succeeds...
performace drops significantly when i install the xposed module for magisk. i hope they fix it.
So far everything works fine on my end, I'm not noticing any performance drops in my day to day use. Then again I haven't used it much without Magisk + exposed but from what i'm seeing it's working well, no noticeable lag or stuttering.
I have gravity box, Amplify and Greenify modules running.
circum said:
Not sure what happened, AFAIK I have rebooted the phone at least once, but after rebooting again, it said that the framework is installed, but has some problem with it and not functioning (yellow background, sorry, I forgot to take a screenshot), and rebooting once again solved the problem, I can confirm that Xposed works.
But as others mentioned, installing Magisk itself makes problems with the boot. Booting always stucks, I always needed (even before installing Xposed) to long-press power after several minutes and the second try usually boots up.
Now having Magisk and Xposed (and GravityBox) installed usally need to restart booting twice (i.e., the 3rd boot works).
Any suggestions how to debug / get logs about this problem?
Click to expand...
Click to collapse
Magisk alone didnt give me boot problems. What rooting guide did you follow?
fake__knv said:
Magisk alone didnt give me boot problems. What rooting guide did you follow?
Click to expand...
Click to collapse
I used this one: https://forum.xda-developers.com/mi-a2-lite/how-to/guide-install-magisk-device-t3825626
But before the update. Since that I have removed Magisk to enable the OTA update, and did not put it back yet -- although, there are many small areas I feel the lack of root...
circum said:
I used this one: https://forum.xda-developers.com/mi-a2-lite/how-to/guide-install-magisk-device-t3825626
But before the update. Since that I have removed Magisk to enable the OTA update, and did not put it back yet -- although, there are many small areas I feel the lack of root...
Click to expand...
Click to collapse
I can assure you @BubuXP's guide is good. Used his rooting guide, followed the steps for updates and its good to go. I rooted my phone when Im on August update. Now Im in September update

Categories

Resources