Hello guys
I'm experiencing the following issue:
I am trying to install the latest Oxygen OS update on my OP3 (talking about 3.2.8). I can do so and at first it works fine, but as soon as I activate Xposed (not the framework itself, that's no problem at all. It's appearently ANY module that needs to be activated) the booting process doesn't finish and I get stuck on boot-animation-screen. Has anybody experienced the same issue or even found a way to fix it?
Also, the Xposed Uninstaller ZIP doesn't seem to work on the OP3. It failes. And any time I want to try again I need to restore a hole Nandroid. Is that a known (or fixed) issue?
Here's some backround info:
- It's not just my phone, same issue on my sister's
- Root and Xposed framework themselves are no problem. Issue starts when activating any Xposed-module
- Xposed worked flawlessly on previous version
- I tried it several times
Would really appreciate any feedback, even just if it's a known issue!
Thanx
What xposed version are you using?
Use xposed v87 , it will work fine then
Or you can try the systemless xposed.
Related
Got my 5x for Christmas. I immediately unlocked and flashed TWRP, and started playing with ROMs. Once I settled on cyanogenmod, I decided to flash xposed. After flashing it, upon boot I got stuck in a loop of "Unfortunately, NFC service has stopped." errors.
Since then, I have been troubleshooting on the factory image. I formatted everything, even the sdcard, and then flashed the factory image. I then booted, then flashed and booted TWRP.
From this point, I have tried, in every order imaginable, flashing SuperSU (systemless and traditional), flashing xposed, and installing the Xposed Installer apk. No matter what I do, I get the NFC error loop. I have also tried both xposed v78, v79, and v79 dirty flashed over v78.
The only thing which has been even mildly successful has been flashing the original 6.0 factory image and then following the above steps. This results in a working xposed installation, but then upgrading to 6.0.1 and reflashing xposed causes the loop again.
From what I can tell by reading here and on /r/nexus5x, plenty of other people are having this issue, and no one seems to have the actual cause or solution. So please, if you have seen this issue, post the circumstances (be as specific as you can with versions, orders, etc), as well as your personal solutions. And if anyone has the true cause and/or solution please post that as well.
Deleted
gpvecchi said:
Deleted
Click to expand...
Click to collapse
v78 doesn't work for me either. I've seen a number of people mention that v79 causes this error, and that reverting to v78 will fix it. However, I cannot get either v78 or v79 to work.
lpreams said:
v78 doesn't work for me either. I've seen a number of people mention that v79 causes this error, and that reverting to v78 will fix it. However, I cannot get either v78 or v79 to work.
Click to expand...
Click to collapse
I just clean flashed mmb29q, tried to install v80, and got the nfc bootloop. Only way to fix was to flash the xposed uninstaller.
Tried this: checking "Enable su during boot" in the SuperSU app, then reflashing Xposed. No luck.
And nfc was not on prior to flashing xposed the first time.
Xposed v79 worked for me fine on mmb29p.
I used supersu 2.66 on mmb29p, and 2.67 on mmb29q.
Busybox installed?
Disabled NFC in settings first before flashing xposed
I got this too on MMB29Q with NFC enabled in settings. I disabled NFC in settings prior to flashing on the next try and flashing xposed v80 worked fine. After installing xposed framework, I was able to turn on NFC in settings again and all is well.
Go it to work. This was my path: Checked every box in SuperSu Settings tab that wasn't checked (e.g., enable multi-user, enable su during boot, etc.), installed the Xposed apk, flashed Xposed zip in TWRP.
Setup: MMB29Q, TWRP 3.0, SuperSU 2.67
I have the same issue trying to use layers manager. Wonder if it's related
I've installed v77 all the way up to v82, all with the same result while also trying everything mentioned before
UPDATE: I've checked literally everything now, including multi-user (didnt think that was necessary before), everything works now on v80
Sent from my Nexus 5X using XDA-Developers mobile app
Hello, anybody successfully installed viper4android on A320FL? I am not begginer (using xposed and a lot of other apps needed root), but I can't install it fine. I tried normal install, install through twrp, freeze knox apps (with titanium backup), etc.. After first launch app I install drivers (successfully), but in drivers stats it's off.. Just not working, guys I really want viper4android, please help and sorry for english .
Edit. I using newest stock firmware with recovery and root + some features like xposed, etc..
It installed fine for me and driver status reports positive but its not working. With Spotify the sound drops for like two seconds when seeking like its trying to initiate the sound engine and then crashing and reverting to default. Id like to know how you got xposed to work though!
Got it working!
I used V4A Enforcing patch from this post for the A5 2016 and it works for me (stock rooted Android 6, TWRP) and i also got xposed working (thread here). Unfortunately V4A kicks in very late so there is an annoying dip when scrubbing in Spotify. Maybe this will improve when there are solid AOSP roms
Anyone tried Xposed on Oreo?
Yup, tried on my OP3 Oreo 8.0.
It's as awesome as before. Only a couple of complaints though -
1. Safetynet check can not be verified while xposed is active, this doesn't let few apps to work. One workaround is, to disable xposed, restart the phone and then to install and login to such apps. Afterwards, activate xposed and restart your phone again. This is tedious. However, it works. Not everytime, though - to use apps such as Zebpay, you always need your xposed to be disabled. This can be managed, but, again, tedious task.
2. OneTap download isn't working!
I was such a fan of this module. Unfortunately, it doesn't work in my OP3. I've tested the module, and just in case any of you have suggestions on how to make it work, do let me know. Till then, I'll better wait for a new release of the module.
These points are my opinions/feedback about xposed on oreo 8.0 on OP3. However, I love XPOSED and I'm totally in love with android because of the tweaks XPOSED has got to offer.
Every since i rooted my pixel 2 xl and installed magisk random apps crash at random times few times a day and i can't seem to figure out how to fix it, I've tried disabling xposed and magisk and all of their modules... Is there anyone else with same problem or someone that knows how to fix it
I get the same issue with a pop up saying "___ has stopped" with a send feedback option.
The apps always seem to work and I thought it was probably because of Xposed so I didn't think anything of it, until you mentioned disabling Xposed and you still have the issue :/
Leads me to believe it may not be Xposed for myself as well
Yeah i don't think it's xposed because i rooted my phone and went like a week before installing xposed but even before xposed apps were still crashing and i have 1 magisk module but i disabled it and still the same, i updated to latest xposed and nada
Hi all,
I have installed Magisk 16.0 based on Maik93's post, and Xposed Framework SDK27 90.2-beta3 (Systemless), through Magisk modules.
When I enable the Xposed module, the phone first shows endless boot animation, and when restarting it again, it boots, but the Xposed app seems not installed (not listed in Settings->Apps and its icon is not present in chooser), although, in Magisk, it is visible in the Modules and it's checkbox is checked.
Did anybody successfully installed Xposed with A2 Lite? What can be the problem?
Thanks a lot,
Circum
Did you install the apk of xposed?
---------- Post added at 11:51 PM ---------- Previous post was at 11:46 PM ----------
https://forum.xda-developers.com/attachment.php?attachmentid=4393082&d=1516301692
Here is the link from xda
No, sorry, I was not aware that it is a separate thing.
Now I have installed, but it says that no Xposed Framework is installed. If I try to install a framework from inside the installer (90-beta3), it -- obviously -- reports an error that /system/framework/XposedBridge.jar already exist...
Because of this, I cannot enable any module from Xposed Installer.
Any tips what do I do wrong?
I want to use Xposed too but we will have to wait for TWRP I guess.
Not sure what happened to you, did you tried ti reboot your phone? Mine is working just fine
mik.y said:
I want to use Xposed too but we will have to wait for TWRP I guess.
Click to expand...
Click to collapse
You can install now through Magisk if you want, if yiu get bootloopbfor any xposed module, just flash thr original boot.img
HoangP05 said:
You can install now through Magisk if you want, if yiu get bootloopbfor any xposed module, just flash thr original boot.img
Click to expand...
Click to collapse
I was able to install it somehow,but stuck after each reboot in process. Now some apps are diying like call enhancement and some test app. So its quite dirty. I have Magist 16.0 installed.
Lol,I cant connect to internet with xposed to download any module. Useless
mik.y said:
I was able to install it somehow,but stuck after each reboot in process. Now some apps are diying like call enhancement and some test app. So its quite dirty. I have Magist 16.0 installed.
Lol,I cant connect to internet with xposed to download any module. Useless
Click to expand...
Click to collapse
Not all are working apparently, but if it is bootloop, you so try to let it boot again, press power and volume down as the same time while it bootloop, the second boot always work for me
There is TWRP for Mi A2 Lite.
Search on google.
NOTICE: For now there isn't official TWRP. There'w unofficiak fork which can you install using fastboot. :good:
Not sure what happened, AFAIK I have rebooted the phone at least once, but after rebooting again, it said that the framework is installed, but has some problem with it and not functioning (yellow background, sorry, I forgot to take a screenshot), and rebooting once again solved the problem, I can confirm that Xposed works.
But as others mentioned, installing Magisk itself makes problems with the boot. Booting always stucks, I always needed (even before installing Xposed) to long-press power after several minutes and the second try usually boots up.
Now having Magisk and Xposed (and GravityBox) installed usally need to restart booting twice (i.e., the 3rd boot works).
Any suggestions how to debug / get logs about this problem?
HoangP05 said:
Not sure what happened to you, did you tried ti reboot your phone? Mine is working just fine
Click to expand...
Click to collapse
Xposed's Gravity box module works on Mi A2 lite?
Yes, GravityBox is working, although as I mentioned, there are issues with boot - I have to reboot several times until it succeeds...
performace drops significantly when i install the xposed module for magisk. i hope they fix it.
So far everything works fine on my end, I'm not noticing any performance drops in my day to day use. Then again I haven't used it much without Magisk + exposed but from what i'm seeing it's working well, no noticeable lag or stuttering.
I have gravity box, Amplify and Greenify modules running.
circum said:
Not sure what happened, AFAIK I have rebooted the phone at least once, but after rebooting again, it said that the framework is installed, but has some problem with it and not functioning (yellow background, sorry, I forgot to take a screenshot), and rebooting once again solved the problem, I can confirm that Xposed works.
But as others mentioned, installing Magisk itself makes problems with the boot. Booting always stucks, I always needed (even before installing Xposed) to long-press power after several minutes and the second try usually boots up.
Now having Magisk and Xposed (and GravityBox) installed usally need to restart booting twice (i.e., the 3rd boot works).
Any suggestions how to debug / get logs about this problem?
Click to expand...
Click to collapse
Magisk alone didnt give me boot problems. What rooting guide did you follow?
fake__knv said:
Magisk alone didnt give me boot problems. What rooting guide did you follow?
Click to expand...
Click to collapse
I used this one: https://forum.xda-developers.com/mi-a2-lite/how-to/guide-install-magisk-device-t3825626
But before the update. Since that I have removed Magisk to enable the OTA update, and did not put it back yet -- although, there are many small areas I feel the lack of root...
circum said:
I used this one: https://forum.xda-developers.com/mi-a2-lite/how-to/guide-install-magisk-device-t3825626
But before the update. Since that I have removed Magisk to enable the OTA update, and did not put it back yet -- although, there are many small areas I feel the lack of root...
Click to expand...
Click to collapse
I can assure you @BubuXP's guide is good. Used his rooting guide, followed the steps for updates and its good to go. I rooted my phone when Im on August update. Now Im in September update