I'm on this condition: stock retail Nougat, stock retail kernel, TWRP installed, rooted with SuperSU, BusyBox installed and Xposed too.
All works fine on my phone... with a little exception: Packet installer.
When I go to install any APK directly (untrusted sources...) like from Aptoide (with its root installation disabled), from Xposed or from file system I got continuos FC of "packet installer" and installation is not possible.
I've overcome this installing apks from ES file explorer or by some APK installer present on Play Store, BUT both of them need to be used externally as stand alone apps and can't be called directly from, e.g. Xposed or Aptoide.
Both this solution after a first different installation starting, use stock Nougat installer, so the FC should be connected to how installations are called by apps...
I've tried A LOT of solution (clear data, cache, update to v.7.1.2 packet installer, disable & re-enable unknown sources, etc...) but none seems able to fix this little annoying issue...
Any ideas?
Do you have this issue too?
Seems like either Xposed modules or any form of putting mods together caused that. Sadly I don't use Xposed due to piracy reasons. But I would start removing mods untill it works for you
joemossjr said:
Seems like either Xposed modules or any form of putting mods together caused that. Sadly I don't use Xposed due to piracy reasons. But I would start removing mods untill it works for you
Click to expand...
Click to collapse
I have very few Xposed MODs installed... I could give it a try with no prob... but I'm not so convinced about a result...
joemossjr said:
Seems like either Xposed modules or any form of putting mods together caused that. Sadly I don't use Xposed due to piracy reasons. But I would start removing mods untill it works for you
Click to expand...
Click to collapse
You were absolutely right! :cyclops:
I've found it was an Xposed module causing the FCs!
This one to be exact: https://forum.xda-developers.com/xposed/modules/mod-xhfw3-floating-windows-t3371074
Weird is that nor calling app neither Packet installer were set to use its windows features and even blacklisting packet installer from XHFW3 doesn't stop FCs... only fully disabling the module does!
Anyway... thanx a lot!
Related
I'm fairly new to rooting on the G3 and the use of Xposed Framework and i've ran into a slight problem.
When updating to the latest Framework, it killed the com.android.systemui process. Everytime I booted it kill the process, i believe the issue is with xblast or Xposed itself.
My question I guess is, do I update the modules before updating the framework?
Or is this Xposed just not playing nice with the G3?
DearlyDeparted said:
I'm fairly new to rooting on the G3 and the use of Xposed Framework and i've ran into a slight problem.
When updating to the latest Framework, it killed the com.android.systemui process. Everytime I booted it kill the process, i believe the issue is with xblast or Xposed itself.
My question I guess is, do I update the modules before updating the framework?
Or is this Xposed just not playing nice with the G3?
Click to expand...
Click to collapse
xblast is known to cause this uninstall it
Im using xposed with no problem. I never use xblast though. Try disable all modules then reboot. And enable one module at a time to figure out which causes it.
i have been receiving this message whenever i go to root explorer to delete UI sounds, because i hate all the stock sounds like camera and battery charging.. i have removed most xposed modules except tweakbox and it still gives me this problem.
Greetings all..
I am working on the Not e 4 and run a large collection of Xposed mods
I have a Sprint Note 2, Note 3 and Note 4 and the 2&3 have never given me any issues with Xposed Framework Modules.
The frame work
Several are causing boot loops upon reboot.
The device will not boot into safemode- which is a huge pain if you did not do a backup in recovery.
I just wanted to remind everyone that if you install Xposed ( and ignore all of the "make sure you nandroid/ backup first messages) this time REALLY MAKE SURE YOU BACK UP /System at least before you activate mods.
I will post a list of the ones giving me issues shortly as I work out process of elimination.
Do you have an idea why my phone says "updating" after I install Xposed?
It's not stuck or anything but in the status bar it has a logo with a checkmark and I have no service. Am I supposed to freeze something?
I don't use many xposed modules and don't have boot loop issues with the ones I use. My problem is not all options in Wanam works. Like disabling sound waning when putting the volume too high. Hopefully the Wanam devs will fix that.
gfp11289 said:
Do you have an idea why my phone says "updating" after I install Xposed?
It's not stuck or anything but in the status bar it has a logo with a checkmark and I have no service. Am I supposed to freeze something?
Click to expand...
Click to collapse
If you turn off Software Updates from the ApplicationsManager you wont see it anymore.
xxSTARBUCKSxx said:
If you turn off Software Updates from the ApplicationsManager you wont see it anymore.
Click to expand...
Click to collapse
I turned off Software Uodates and it still comes up in the notification bar
I don't get any service either upon installing and restarting with xposed
When you installed xposed installer (assuming this was not from a titanium backup), it should have saved a zip file called, Xposed-Disabler-Recovery.zip to your sdcard or internal memory.
Install it in recovery and it will disable xposed framework so you can figure out which module is not working.
Here's a link:
http://www.datafilehost.com/d/ccb18d00
Deleted. Thanks. ^^^^^^^^
hermeticist said:
When you installed xposed installer (assuming this was not from a titanium backup), it should have saved a zip file called, Xposed-Disabler-Recovery.zip to your sdcard or internal memory.
Install it in recovery and it will disable xposed framework so you can figure out which module is not working.
Here's a link:
http://www.datafilehost.com/d/ccb18d00
Click to expand...
Click to collapse
I'll try it when I get home
I just install this in TWRP?
gfp11289 said:
I'll try it when I get home
I just install this in TWRP?
Click to expand...
Click to collapse
Yes. It removes xposed framework without uninstalling anything.
This way you can use the process of elimination add to which xposed module is screwing up your system:
Reinstall framework, turn one module on at a time, reboot, repeat.
If you are sure individual modules are not messing up, don't bother turning them off.
hermeticist said:
Yes. It removes xposed framework without uninstalling anything.
This way you can use the process of elimination add to which xposed module is screwing up your system:
Reinstall framework, turn one module on at a time, reboot, repeat.
If you are sure individual modules are not messing up, don't bother turning them off.
Click to expand...
Click to collapse
The thing is that I didn't have any modules on. I just installed it, updated it, rebooted, and I'm stuck with no service until after I uninstall it
Weird
Maybe I could try to flash Xposed in TWRP? If that's even possible..
gfp11289 said:
Maybe I could try to flash Xposed in TWRP? If that's even possible..
Click to expand...
Click to collapse
All you have to do is install the apk. Then once in Xposed, install the framework.
Id try uninstalling the framework, deleting the apk and download a fresh apk of xposed and start fresh. Dont associate TWRP with installing Xposed.
I think its working now. For some reason the update stays on my status bar for awhile before it turns off by itself. I tried to send myself some text messages last night and they took a long time to send, or just never sent at all. I have some decent status by my house so that wasn't an issue. I might've not given my phone enough time to boot up xposed or something, but regardless it's working now.
Being connected to wifi, does in anyway affect sending text messages while I'm on xposed? I barely had enough time to test it out when I was at home but driving around my city I was sending myself text messages and they seemed to go through okay.
Wanam Xposed
11/5/14 Wanam Xposed Module update available.
Drama!!! It is just Xposed Framework.
https://www.google.com/amp/s/forum....ed/unofficial-systemless-xposed-t3388268/amp/
The thing is.... I went to the app to get the program and Magisk wouldn't install the program on it's end. Took a shot and installed the apk (SDK 25), then installed the 88.1 version shown in the picture (now 88.2) rebooted and waited to "upgrade" itself.... But here it is plain as day. I'm not saying you may get it running on yours but it worked for me. Happy testing y'all,
SykkNyzz
And apparently Gravity Box for Nougat just came out 2 days ago at the time of this post.
Just ticked to center the time. Perfecto.
Reboot and such work as well
Nav Bar as well (note swapped buttons and added menu)
Even the Expanded Desktop works.
I can't get any modules to install in magisk on this phone. Tried systemless Xposed and nothing. How did you install it?
That looks like system install. Systemless usually says it like in this screenshot.
Did you install magisk with the zip in recovery, or modified boot.img? Systemless Xposed would be nice, hoping to get working on mine.
madbat99 said:
I can't get any modules to install in magisk on this phone. Tried systemless Xposed and nothing. How did you install it?
That looks like system install. Systemless usually says it like in this screenshot.
Did you install magisk with the zip in recovery, or modified boot.img? Systemless Xposed would be nice, hoping to get working on mine.
Click to expand...
Click to collapse
I couldn't use the Magisk even to this moment. I just used the apk listed above and did it that way
SykkNyzz said:
I couldn't use the Magisk even to this moment. I just used the apk listed above and did it that way
Click to expand...
Click to collapse
OK. I got system install working on mine too. Yours looks like system install too, not systemless. The xposed app downloads normal system install. You should change the name of the thread since it's not actually systemless. Just to avoid confusion.
madbat99 said:
OK. I got system install working on mine too. Yours looks like system install too, not systemless. The xposed app downloads normal system install. You should change the name of the thread since it's not actually systemless. Just to avoid confusion.
Click to expand...
Click to collapse
Well, the app itself from the website is stated as such. As where I can see where you are coming from. Thank you for the heads up.
SykkNyzz said:
Well, the app itself from the website is stated as such. As where I can see where you are coming from. Thank you for the heads up.
Click to expand...
Click to collapse
I can't get any magisk modules to work either, I was genuinely hoping you had it here. I've noticed you're pretty active in the forums for this phone.
Glad you showed xposed working, it helped me decide to try it.
Hi all,
I have installed Magisk 16.0 based on Maik93's post, and Xposed Framework SDK27 90.2-beta3 (Systemless), through Magisk modules.
When I enable the Xposed module, the phone first shows endless boot animation, and when restarting it again, it boots, but the Xposed app seems not installed (not listed in Settings->Apps and its icon is not present in chooser), although, in Magisk, it is visible in the Modules and it's checkbox is checked.
Did anybody successfully installed Xposed with A2 Lite? What can be the problem?
Thanks a lot,
Circum
Did you install the apk of xposed?
---------- Post added at 11:51 PM ---------- Previous post was at 11:46 PM ----------
https://forum.xda-developers.com/attachment.php?attachmentid=4393082&d=1516301692
Here is the link from xda
No, sorry, I was not aware that it is a separate thing.
Now I have installed, but it says that no Xposed Framework is installed. If I try to install a framework from inside the installer (90-beta3), it -- obviously -- reports an error that /system/framework/XposedBridge.jar already exist...
Because of this, I cannot enable any module from Xposed Installer.
Any tips what do I do wrong?
I want to use Xposed too but we will have to wait for TWRP I guess.
Not sure what happened to you, did you tried ti reboot your phone? Mine is working just fine
mik.y said:
I want to use Xposed too but we will have to wait for TWRP I guess.
Click to expand...
Click to collapse
You can install now through Magisk if you want, if yiu get bootloopbfor any xposed module, just flash thr original boot.img
HoangP05 said:
You can install now through Magisk if you want, if yiu get bootloopbfor any xposed module, just flash thr original boot.img
Click to expand...
Click to collapse
I was able to install it somehow,but stuck after each reboot in process. Now some apps are diying like call enhancement and some test app. So its quite dirty. I have Magist 16.0 installed.
Lol,I cant connect to internet with xposed to download any module. Useless
mik.y said:
I was able to install it somehow,but stuck after each reboot in process. Now some apps are diying like call enhancement and some test app. So its quite dirty. I have Magist 16.0 installed.
Lol,I cant connect to internet with xposed to download any module. Useless
Click to expand...
Click to collapse
Not all are working apparently, but if it is bootloop, you so try to let it boot again, press power and volume down as the same time while it bootloop, the second boot always work for me
There is TWRP for Mi A2 Lite.
Search on google.
NOTICE: For now there isn't official TWRP. There'w unofficiak fork which can you install using fastboot. :good:
Not sure what happened, AFAIK I have rebooted the phone at least once, but after rebooting again, it said that the framework is installed, but has some problem with it and not functioning (yellow background, sorry, I forgot to take a screenshot), and rebooting once again solved the problem, I can confirm that Xposed works.
But as others mentioned, installing Magisk itself makes problems with the boot. Booting always stucks, I always needed (even before installing Xposed) to long-press power after several minutes and the second try usually boots up.
Now having Magisk and Xposed (and GravityBox) installed usally need to restart booting twice (i.e., the 3rd boot works).
Any suggestions how to debug / get logs about this problem?
HoangP05 said:
Not sure what happened to you, did you tried ti reboot your phone? Mine is working just fine
Click to expand...
Click to collapse
Xposed's Gravity box module works on Mi A2 lite?
Yes, GravityBox is working, although as I mentioned, there are issues with boot - I have to reboot several times until it succeeds...
performace drops significantly when i install the xposed module for magisk. i hope they fix it.
So far everything works fine on my end, I'm not noticing any performance drops in my day to day use. Then again I haven't used it much without Magisk + exposed but from what i'm seeing it's working well, no noticeable lag or stuttering.
I have gravity box, Amplify and Greenify modules running.
circum said:
Not sure what happened, AFAIK I have rebooted the phone at least once, but after rebooting again, it said that the framework is installed, but has some problem with it and not functioning (yellow background, sorry, I forgot to take a screenshot), and rebooting once again solved the problem, I can confirm that Xposed works.
But as others mentioned, installing Magisk itself makes problems with the boot. Booting always stucks, I always needed (even before installing Xposed) to long-press power after several minutes and the second try usually boots up.
Now having Magisk and Xposed (and GravityBox) installed usally need to restart booting twice (i.e., the 3rd boot works).
Any suggestions how to debug / get logs about this problem?
Click to expand...
Click to collapse
Magisk alone didnt give me boot problems. What rooting guide did you follow?
fake__knv said:
Magisk alone didnt give me boot problems. What rooting guide did you follow?
Click to expand...
Click to collapse
I used this one: https://forum.xda-developers.com/mi-a2-lite/how-to/guide-install-magisk-device-t3825626
But before the update. Since that I have removed Magisk to enable the OTA update, and did not put it back yet -- although, there are many small areas I feel the lack of root...
circum said:
I used this one: https://forum.xda-developers.com/mi-a2-lite/how-to/guide-install-magisk-device-t3825626
But before the update. Since that I have removed Magisk to enable the OTA update, and did not put it back yet -- although, there are many small areas I feel the lack of root...
Click to expand...
Click to collapse
I can assure you @BubuXP's guide is good. Used his rooting guide, followed the steps for updates and its good to go. I rooted my phone when Im on August update. Now Im in September update
Anyone able to get Viper4Android to process? I have it installed through Magisk and it works when first installed but eventually stops. Only way to get it working again is to reboot.
I think it stops when changing output forms. Instead of rebooting fully, try hitting the 3 dots on the top right of the app and hitting exit and then relaunching the app.
I tried that and force closing it. Didn't work but what seems to have fixed it was uninstalling the driver...it then asked for root permission to do that. After a restart everything is working even when changing apps. We'll see if it's permanent or not. Thanks for the reply though.
Try this: uninstall your current module, reboot, and install this apk. It's an unofficial material design 2 viper that auto generates a magisk module when you install it for your device. I got mine working properly.
Thanks, I'll try that. Been having to reboot again.
Well along with the acp and aml modules that method worked. Hopefully this sticks. Thank you for your help!
TENN3R said:
Try this: uninstall your current module, reboot, and install this apk.
Click to expand...
Click to collapse
That's what I have, and it worked at first but not any longer on Pixel 3a.
Are there other modules that should be installed, or can't be, as well?
-G
ggibby said:
That's what I have, and it worked at first but not any longer on Pixel 3a.
Are there other modules that should be installed, or can't be, as well?
Click to expand...
Click to collapse
I only know about that module, and the one from ahrion and Zackptg5 (here).
Have you tried in this module enabling the compatibility mode and reboot?
TENN3R said:
Have you tried in this module enabling the compatibility mode and reboot?
Click to expand...
Click to collapse
Compatibility mode was enabled, so I disabled it and now it seems to be working.
Thanks for the hint!