I have an xperia xa1 and when I connect it to flashtool I throw an error and it caused my cell phone not to turn on, it does not load, it does not enter in any way and when I connect it to the computer it does not recognize it, when I connect it to the load only turn on the red LED, but the animation of the load does not appear if someone has some solution I would appreciate it too. :crying: :crying:
Related
Hello guys. I just got this Xperia Acro S with the red light when it is connected to the charger. The phone was working all right and then it suddenly went off. When it is connected to the wall charger (Samsung or Sony charger) it gives a red led for a while, depends on how long it was disconnected from the charger and then the led goes off. If I connect to the pc, I get SEMC Flash Device. I tried everything I saw in lots of forums and nothing helped. If I hold the Volume + with power button, I don't get any vibration, no matter how long I hold. The same thing with the Volume - and the same with the Volume + - and the power button together. If I connect to the pc, the red led will come on, then after a while it will go off and only then the pc sees the device as SEMC Flash. I tried to remove the battery and reconnected it, but still no results as well. The flashtool says For 2011 devices line, be sure you are not in MTP mode. SUS doesn't see the phone, but the PC companion behaves strangly. When it says connect the phone, I plug it in and then the Pc companion says: Please update Pc companion. When I check for latest version it tells me that is the latest one. It can't be an old version, because I just downloaded it from the sony website. If I launch the repair services, it says press volume down and connect usb. I did that but the phone keeps entering into SEMC Flash mode. Please help me out
Hi,
I can't get into fastboot mode on my Sony Acro S. I hold the volume up button and then insert the USB cable. The blue led light up and everything seams to be ok but after some seconds the led get dark and the phone shows the Sony logo. The computer recognize the phone and the device manager shows an unknown device but It disapear after a while...
Anyone that have seen this before and maybe have a solution?
//Robert
That means your computers system is unable to install essential fastboot drivers for your phone. Try alternative USB ports.
If still it doesn't work then try it on another system. Also have a look on this,
http://forum.xda-developers.com/showthread.php?t=2447319
hi ppl
usb not recognize, not even the "unknow device" just like nothing conected. only logo "sonyericson" show. if use hot keys to flash mode or fastboot mode, the phone stay stuck in a blackscreen and a green light or blue light in the power button, depending what condition u start.
used flashtools, and pc companion tryin to fix, but not work if no usb is detected.
Hello
After install wrong rom, my Sony Xperia M became dead Phone won't turn on, no fastboot and flashmode lights. When I try connecting the phone to pc, device manager shows 'QHSUSB_DLOAD'. When I connected testpoint with GND, opened s1tool and connected to pc, bottom light turn on first in green color and after few seconds- red and on s1tool shows error 'llbug...' Is there a chance to bring the c1905 to life? Thanks for help
I wanted to flash rom with Sony flash tool but it failed and phone turned off. Now it's showing only red led. If I connect to PC then it shows unknown device and it disconnect automatically from PC in a while. No fastboot, No download mode, No charging, no boot.
Please help me if someone has any solution for it