My G4 was running perfectly fine but then it had lines on the screen and shutoff and now it wont turn on again! When i hold the power button it vibrates but no display at all. Please respond ASAP!
LG G4 VS98611A
Android 5.1
Did you drop the phone or put any pressure on it?
Yesterday wifi stopped working as in it wouldnt turn on. turned phone off then turned on again with vol up and power and the wifi works. Now when I try to update software my phone says suspected in rooting and wont show mtp devices when I connect it to my computer. my mom has the same lgg3 and mtp shows up when plugged in. What to do to fix?
Hello I Have A lg g3 clone d855
There was some virus in it by some way
due to which it automatically open file and run it
After few day When i restart the phone
The lcd was working but it seems black and no logo on Startup
Red led is working by awake phone , by pressing power button
And Blue Led work on Start up
Kindly help me
What i have to do .. to make it working it again
Pics Are Attached Below
Well a few days ago, like 2 weeks ago, I thougt I lost my SW3 (I use it w / o leash because it broke and there's no replacement for the stainless steel one) but actually it was lost on my travel bag xD
After plug in again it started to charge, but when I tried to turn on (after reach 100%), after the sony and SW3 logo, it turns off, like it has a problem at boot. I tried to repair via Xperia Companion and the process was succesful, but the watch just gets stuck on the same SW3 logo.
Now I think is the battery, but I'm really hoping is not, there are any suggestion guys about what could be happening?
Is it stuck at the 4 dots spinning? If So I have the same problem, I have tried a factory reset, updating the rom via push commands etc I have brought a new SWR50 thats working with ADB debugging enabled this time (Didn't do it on the last one) my question hopefully will help the OP as well can I take a complete clone/rom backup from the working watch then push that to the broken watch (Bare in mind no debugging enabled on the broken one) Also to the OP have you held down the power button to get to the fastboot menu and factory reset/recovery settings? if not then you turn off the watch, press and hold the power button until the "insert usb now" shows, you then press the power button quickly twice to access the recovery menus
The Watergod said:
Is it stuck at the 4 dots spinning? If So I have the same problem, I have tried a factory reset, updating the rom via push commands etc I have brought a new SWR50 thats working with ADB debugging enabled this time (Didn't do it on the last one) my question hopefully will help the OP as well can I take a complete clone/rom backup from the working watch then push that to the broken watch (Bare in mind no debugging enabled on the broken one) Also to the OP have you held down the power button to get to the fastboot menu and factory reset/recovery settings? if not then you turn off the watch, press and hold the power button until the "insert usb now" shows, you then press the power button quickly twice to access the recovery menus
Click to expand...
Click to collapse
I forgot about this thread lol
thanks dude!, A couple times it reached the spinning dots, but not always, sometimes it turned off on the SW3 logo before the dots appear, and actually I tried all those things you mentioned, but it didn't work, also I think my watch is (even more) screwed now xD...
Trying to do a second repair on Xperia Companion, the watch got turned off in mid repair, lending obviously on an error, and also losing the ability of do offline charge so once the battery reach 0, is over...
now when I plug in just stays on the SW3 logo, I still can go to connect USB screen and go to the two clicks menu (and stays on), but every time I try a repair, in the middle of the process disconnects and turns off, I don't know exactly why only when is plugged on the repair process it turns off, even pluged in the PC w/o repair stays connected all the time... bad thing is I don't know if is charging or not, so could stop working anytime
Have you tried to push the update through adb recovery mode?
The Watergod said:
Have you tried to push the update through adb recovery mode?
Click to expand...
Click to collapse
every day I'm more convinced the watch is screwed
If I turn on the watch stays on the SW3 logo all the time (it seems offline charge works after all), I even can go to the "insert USB" screen and stays on all the time, but when I try to push something to the watch, always disconnects, turns off and the process obvioulsy gets interrumpted, I'm losing my hopes xD
I'm using the original charging wire, but tried with other working ones
my sister bought me this smart watch , it came on long enough to program a few this after I charge it and then 10 minutes later it shut off and now it won't come back on or power up , what should I do ?
I have a weird problem with my sw3. When I plugin my watch to a charger nothing shows up but the watch gets heated up. But when I connect it to PC it just keeps turning on and off. Tried various methods available on this site but none of them worked.
Dear XDA community,
I have a 5/6y old OnePlus3, a great phone which never had a problem since last week when the screen simply went black.
If I try to turn it one but it doesn't react.
If I charge it, it shows me an alert that the battery is critically low. It charges for a couple of minutes until it automatically tries to start but then it does not pass the OnePlus logo screen and goes black again. I though it might have been a battery problem but, even if I leave it to charge the whole night, it still doesn't turn on.
I manage to enter the fastboot mode but from there, all paths (e.g. restart, start in recovery mode) lead to the black screen again.
When it's in fastboot mode and I plug it to the PC via USB, it is recognized as a connected android device, however I never activate the USB debuggin option (damn me!!!) and when I try to search the phone using 'adb devices' command it's not there...
Does anyone have an idea on how I can access the storage to copy my files? Or is it even possible at this stage?
Thanks everybody in advance for any help!