Hi guys
I have an Asus phone pad and recently I turned it on and it jus stuck on the start up screen I've tried the factory erase and hard reboot still refuses to work. Your help will be greatly appreciated
Sent from my SM-G318H using Tapatalk
ellykatt said:
Hi guys
I have an Asus phone pad and recently I turned it on and it jus stuck on the start up screen I've tried the factory erase and hard reboot still refuses to work. Your help will be greatly appreciated
Sent from my SM-G318H using Tapatalk
Click to expand...
Click to collapse
what model is it? if its FE170CG, you will need to go -- https ://www .smartphones. how/firmware/item/asus-fonepad-7-k102-fe170cg-raw-file -- for raw firmware file,asus flashtool and drivers.
the instruction will be on the site.
mine works after this fix, hope yours will too.
Related
Hi,
Accidentally bricked my phone on the start screen in the top left corner it says "Secure booting Error! Cause: boot certification verifiy". I think i forgot to unlock the bootloader, missed that step when searching online. Anyway, I tried getting it into download mode following the instructions in this thread: http://forum.xda-developers.com/showthread.php?t=2010624 without success. I can't even get into download mode using the instructions in that thread. Any ideas? Or is it really dead?
Thanks in advance.
Ok, finally did get it into download mode. Are the instructions in the thread mentioned above still up to date?
Have you installed that msxml file parser?. Use rear usb ports.
Sent from stock GT-I9505/smart phones,dumb people.
Problem solved. Had a few problems with the flashing application as it apparently always crashes on Windows 8 but found a Windows 7 pc and it worked perfectly.
Same issue
I am Nexus 4 and it accidentally bricked and also showing the same message as your phone does.... I need help in this matter
saddampir said:
I am Nexus 4 and it accidentally bricked and also showing the same message as your phone does.... I need help in this matter
Click to expand...
Click to collapse
Goto nexus forum. Pretty easy to fix nexus fyi
Sent from my LG-E975 using Tapatalk
Hello guys a friend of mine has tried to flash a cwm recovery from unknown sources apk file. the bottom line is that the pad is bricked.
the pad doesn't boot, when connected to charger nothing happens and when i tried to enter download mode it was not possible. the pad isn't responding to anything.
the pad was rooted. is there any solution for this problem or we need to send it to lg???
It's too early to panic and give up on it.
Get it into factory recovery mode by the button combination. You can find instructions on this site (and there is even a video on YouTube). Just remember that it's kinda tricky (I personally did it more than a dozen times and sometimes it took me up to 15 min to do it right).
You may check this thread to force go back to stock ROM first, probably unbrick it during the process
http://forum.xda-developers.com/showthread.php?t=2590185
Same here
My LG G Pad bricked!
When i conect to PC, it show "qhsusb_dload"
Can't go to download mod
Any help pls!
TommyTaylor said:
My LG G Pad bricked!
When i conect to PC, it show "qhsusb_dload"
Can't go to download mod
Any help pls!
Click to expand...
Click to collapse
REALLY!!! Mine TOO!!
http://forum.xda-developers.com/showthread.php?t=2719384
Wow this is why I ain't rooting mine. I have to resists
Sent from my Nexus 5 using XDA Premium 4 mobile app
We still need help, pls!
Anybody have any ideas?
LG G Pad black screen
Jhon998 said:
REALLY!!! Mine TOO!!
http://forum.xda-developers.com/showthread.php?t=2719384
Click to expand...
Click to collapse
Hi, I have an LG G Pad v500 with the same problem. I was trying to unlock my bootloader. Then I replaced my aboot to this one http://forum.xda-developers.com/show....php?t=2698267, following this guide: http://www.grupoandroid.com/topic/1....t-todo-en-uno/.
I have an LG L70 D325 and it worked to me, so I tried to do the same with my LG G Pad.
Now my LG G Pad doesn't turn on. My screen is black and I can't access "Download Mode" nor "Recovery Mode" and nothing else. It's seems like my device is dead.
Can someone help me?
Is there something that I can do to fix my device?
I appreciate all kind of help!!!
ruukasuruu said:
Hi, I have an LG G Pad v500 with the same problem.
Click to expand...
Click to collapse
Please don't post the same thing in two threads. I have a different variant so it's best if someone else advises you.
Sent from my VK810 4G
Hi guys,
Happy New year
I am having the same issue here, did you guys get yours fixed?
Hi,
yesterday I tried to root my G Pad using the rooting script form Dalingrin. Everything worked flawless. Afterwards I tried to install CM using CWM. But CWM told me that I must install a recovery image manually, which I didn't know where to get. So I decided to put the tablet back to "stock". After downloading the image and installing it the LG support tool told me everything was done. But after a restart every single software I had (even the wallpaper and lock code etc.) was still there. Wasn't the recovery not supposed to clear everything or is this correct? Hope you can help me.
Greetz
Michael
May be you not wiping data after return to stock.
Sent from my LG-V500 using Tapatalk
Yeah Black LIst is right you have to boot into stock recovery and do a wipe after using the tool.
Sent from my LG-V500 using XDA Premium 4 mobile app
Black LIsT said:
May be you not wiping data after return to stock.
Sent from my LG-V500 using Tapatalk
Click to expand...
Click to collapse
hEY I WAS TYRING to update my phone via LG support tool but it wasnt working ... browsing throug the options i clicked over update recovery and Koboom....My phone was upgrading or something , screen was yellow showing emergency mode ...it between some error displayed on the LG support tools and it asked me to remove battery , replug & start all over again... But my phone didint start at all ...and it just stopped...
Please help me...is my phone bricked or what ? what should i do now take it to service centre ?
Piyush Verma said:
hEY I WAS TYRING to update my phone via LG support tool but it wasnt working ... browsing throug the options i clicked over update recovery and Koboom....My phone was upgrading or something , screen was yellow showing emergency mode ...it between some error displayed on the LG support tools and it asked me to remove battery , replug & start all over again... But my phone didint start at all ...and it just stopped...
Please help me...is my phone bricked or what ? what should i do now take it to service centre ?
Click to expand...
Click to collapse
This forum is for the LG GPad V500, V510 and the V810. Not for an LG Phone, you probably need to start with finding the forum here at XDA for your specific device.
Hello
as the title says i have this problem ...i cant get pass this message in order to make a factory reset.I searched through the web and couldnt find any solution.Any suggestions?
Thanks in advance
Do a factory reset using the hardware buttons
http://solverbase.com/w/LG_G3:_Hard_Reset_(Factory_Reset)
Or use the lg PC suite to do a software repair if you want to save your data.
Sent from my LG-D855 using Tapatalk
Thanks for the answer.I already did the first option like 3 times and unfortunately nothing happened.Now i ll with the PC suite but i think i have no hope
Am I the first one that actually messed up this phone like this?..because i cant see another thread with the same problem....
Don't give up hope. If the pc suite does not work follow this guide to flash a new firmware. http://forum.xda-developers.com/showthread.php?t=2785089
Sent from my KFTHWI using Tapatalk
Sorry for being late!Guess what! My lg g3 is back from the dead thanks to lg pc suite!
Thanks for your suggestions corrsea!
(-:
Sent from my LG-D855 using Tapatalk
Hey, I have this problem too, did you just restore software errors while still rooted? because when I do it, it just says there is nothing wrong with it
I'm not a robot
you r not the first one my friend, i just had the same problem then i did factory reset using TWRP, and it worked from the 1st reset
Hi guys,
My Asus Zenphone 2 (2gb Ram) just showing usb logo. I guess it's bricked.
I never tried rooting it or install any rom on the phone.
I've searched the forum but couldn't find any solution on it.
Can any guys please help?
(It's not even going to recovery mode. I've tried the power+ vol+ button method... but not working. just the same logo only)
Thanks in advance.
Have you tried the Asus flash tool to see if it recognizes the phone? There is also an Intel flash tool which you could try, you may be able to flash the raw ingredients and get back to normal and flash through bootloader to update both threads for those tools are explained in the Zen 2 forum, search for them
Sent from my ASUS_Z00AD using Tapatalk
raw files not ingredients, I really hate auto correct
Sent from my ASUS_Z00AD using Tapatalk
ridwanopu said:
Hi guys,
My Asus Zenphone 2 (2gb Ram) just showing usb logo. I guess it's bricked.
I never tried rooting it or install any rom on the phone.
I've searched the forum but couldn't find any solution on it.
Can any guys please help?
(It's not even going to recovery mode. I've tried the power+ vol+ button method... but not working. just the same logo only)
Thanks in advance.
Click to expand...
Click to collapse
What were you doing when this happened..?
Apparently this helps...
http://forum.xda-developers.com/showpost.php?p=64283594&postcount=3212