Develop Bugs

TCL P600 / Alcatel One Touch Snap 7025D Root and GAPPS

Root and GAPPS instruction for TCL P600
Since TCL P600, TCL P606 and Alcatel One Touch Snap 7025D are the same phones I just write about TCL P600 now. But it's working for both.
TCL P600 root package: http://www.4shared.com/zip/3HRtqraE/TCL_P600_Root.html
HowTo Root TCL P600:
- Extract the file
- Start the flash tool in extracted folder
- Make sure under options it is choosen “with battery”
- In FlashTool load scatter file contained in folder
- Click checkboxes of BOOTIMG and RECOVERY
- Doubleclick on BOOTIMG and refer to TCL-P600_130417__boot_patched_130508-162244.img
- Doubleclick on RECOVERY and refer to TCL-P600_130417__recovery_130508-162244.img
- Switch off mobile and unplug it from usb
- Click “download” in flash tool
- Plug in usb in phone
- If you get a green circle from flash tool saying OK you’re ready with root shell
- Unplug phone and reboot into CWM
- Start Droidtools and plugin usb to phone again
- Install superuser of your choice into phone.
- Ready – you have full root to phone.
If you experience any problems please check if you used the right drivers. Please check drivers attached in folders. Only use them.
Here is the JB gapps zip for flashing with CWM: http://goo.im/gapps/gapps-jb-20121011-signed.zip
Full instruction of getting a well working TCL P600:
1. First of all I updated the phone with TCL updater to the latest firmware.
2. I rooted it as I described before.
3. I deleted lots of China Apps and also under system/media bootup sounds and some - for me - other stuff not needed in order to get more space on system partition.
4. I installed GAPPS through CWM. I did it with this one: http://goo.im/gapps/gapps-jb-20121011-signed.zip
After rebooting I got crash of google search. I ignored it and added my google account. After opening playstore then I got update for google search. After updating there is no crashing anymore.
All other gapps are working quite well. I tested GPS for the TCL P600 and was really suprised it works quite fast and accurate.
The only thing: There is no A-GPS setting. Let's say: There is no GPS setting at all. You can only switch GPS on and off. Settings are not included. Maybe this will be unlocked with a modded rom.
I'm now testing all functions in detail but up to now it works really great.
Hope you got it also up to this point. After all steps this phone is really perfect.
------------------
If you brick your phone you have a brick Not my fault. I don't take responsibility of that my instruction will work for you. It worked for me. So now it's up to you.

I tried what you say but no thing happened .
I have alcatel one touch snap

Where can i buy
Mr.Mahmoud.Pro said:
I tried what you say but no thing happened .
I have alcatel one touch snap
Click to expand...
Click to collapse
Hi Mahmoud,
I want to know where you bought the mobile.. i was searching a lot over the internet and local stores to buy "alcatel one touch snap 7025D" mobile but i couldn't find it anywhere in my area (Andhra pradesh, India.) can you please tell a place or online website where i can find the mobile?

internal memory
hey i'm want to know if the root is swap bet. internal & external memory
that for games over 3 Gega

Custom Recovery
Hey i want to know if this recovery can be ported to my phone the alcatel one touch fierce it is the same as th one touch snap/7025d just without the 8mp camera and splash water proofing everything else is the same i had tried the aoutomatic port for CRR recovery but when it flashed the recovery i got a security error on my alcatel that says "error 101 unaouthorized software installed "it would not boot upand was bricked i bought the same phone again and i am wondering how y'all ported it to the fierces sister phone the one touch snap .thanks and have a great day

I don't know about porting possibility. I guess there is no way. This thread is not about changing the ROM but just how to root the TCL. There is no custom ROM out actually. So I don't see chances to port. Why should this be necessary? Is the stock ROM having problems?
Gesendet von meinem GT-N8000 mit Tapatalk

hello weimerd
my problem is that I have rooted the phone but when i delete Chinese applications to install gapps I deleted the app that handles the notification bar and other things, don't have notifications bar
the keyboard works, after loading another
google search don't work
Do I have to reload the firmware? Where do I can download the stock rom P606 TCL? to star again.
or
How I can recover this app? Can you pass me the app that has that control?
Can you say that apps I have to delete?
sorry by my english

weimerd said:
I don't know about porting possibility. I guess there is no way. This thread is not about changing the ROM but just how to root the TCL. There is no custom ROM out actually. So I don't see chances to port. Why should this be necessary? Is the stock ROM having problems?
Gesendet von meinem GT-N8000 mit Tapatalk
Click to expand...
Click to collapse
NO i just want to see if thos recovery could work in the case that ne2w rom development would occur and to create a backup for people who need it that is why i wanted to see if it could be ported

Solved the problems
Solved the problems.
I was able to upgrade wiht "TCL 2.7.4 Updater Setup.exe" the mobile software, I had the "TCL 2.7.9 Updater Setup.exe" version and this version told me it was updated. When I tested with 2.7.4 has recharged my sw and have gone back to the top, I rooted again with wiemerd instructions and now everything has worked correctly.
Thank you for your instructions and weimerd Sixpenny by spend "TCL S 2.7.4 Updater Setup.exe" saved me.
:laugh::laugh::laugh::laugh::good::good::good::good::good:

Hi all.
Is possible to port or create any custom rom for this device?
Thanks

Hi,
i have Snap 7025X, can this root steps bee used for that version too? Looks like OS is same, i have SIM management even i have 1 sim card.

root ^^^^^
Yeah this root will work if not try kingo root its great plus its one click just t urn on debugging. And make sure that your pc recognizes the phone also try motochopper

angort14 said:
Yeah this root will work if not try kingo root its great plus its one click just t urn on debugging. And make sure that your pc recognizes the phone also try motochopper
Click to expand...
Click to collapse
Thank you, i will try. I must install some other version of OS, official is fully bugged. After i used ROMs from xda for last 2 years, on my old phone, i forgot how bugged is official android.
There are so much crashes with official version, corupted SD card and so on...

please help me. after reflashing of my rom with flash tool. i have lost my imei and i have not done backup of my efs. my alcatel ot 7025d can't recognize any sim. i need efs backup or way to solve of my problem. i live in ivory coast there are not alcatel sav in this country.

I used kingo for root. Its really one click root tool. If your phone is rooted, you can restore to default. You can try to restore it with that tool.
Anyone know where to download Custom Boot Loader and Newer version of OS?
I have huge problem with this phone. There is all the time problem with memory card. I am using kingston class 10, 16gb memory but from time to time, after i take some picture or use default gallery, i get message that my memory card is corrupted. I need to restart phone and everything is ok, but sometimes it require even 3-5-7 restarts and its really anoying. Cant take pictures, use ringtone from memory cartd etc.
I tried with official updater but still use 4.2.1 version. Anyone have any newer custom rom?
Sorry for off topic but i am sure that this problems can be solved with some newer OS.

Pavankumar1889 said:
Hi Mahmoud,
I want to know where you bought the mobile.. i was searching a lot over the internet and local stores to buy "alcatel one touch snap 7025D" mobile but i couldn't find it anywhere in my area (Andhra pradesh, India.) can you please tell a place or online website where i can find the mobile?
Click to expand...
Click to collapse
You have a credit card to buy online ????

EmptySD said:
I used kingo for root. Its really one click root tool. If your phone is rooted, you can restore to default. You can try to restore it with that tool.
Anyone know where to download Custom Boot Loader and Newer version of OS?
I have huge problem with this phone. There is all the time problem with memory card. I am using kingston class 10, 16gb memory but from time to time, after i take some picture or use default gallery, i get message that my memory card is corrupted. I need to restart phone and everything is ok, but sometimes it require even 3-5-7 restarts and its really anoying. Cant take pictures, use ringtone from memory cartd etc.
I tried with official updater but still use 4.2.1 version. Anyone have any newer custom rom?
Sorry for off topic but i am sure that this problems can be solved with some newer OS.
Click to expand...
Click to collapse
I have the same problem, did you get any solution?
Regards

jobenja5 said:
I have the same problem, did you get any solution?
Regards
Click to expand...
Click to collapse
I mentored few problems, i dont know what do you mean.

EmptySD said:
I mentored few problems, i dont know what do you mean.
Click to expand...
Click to collapse
Have you solved the problem with the SD error?

jobenja5 said:
Have you solved the problem with the SD error?
Click to expand...
Click to collapse
Yes, buy new card I tried million things, formatted card using computer, phone, different phone etc. At the end, i bought new card and there is no problems at all. I give my card to my gf and she is using card without problem for last half year.

[Q&A] [ROM][July13][KitKat][4.4.4] Beanstalk | Release 6 | bravo

Q&A for [ROM][July13][KitKat][4.4.4] Beanstalk | Release 6 | bravo
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:

when i want to install package from sd card it says:
E:Error in /sdcard/BeanStalk-4.4.4007-20140713-bravo-RC6.zip
(Status 0)
Installation aborted.
what should i do?

alfredoooo said:
when i want to install package from sd card it says:
E:Error in /sdcard/BeanStalk-4.4.4007-20140713-bravo-RC6.zip
(Status 0)
Installation aborted.
what should i do?
Click to expand...
Click to collapse
What recovery and version do u have?

The problem Solved.
here is what i did:
Installed Unrevoked3 & root my device
Installed Revolutionary and SA-OFF my device
Installed clockworkmod 5
Installed CM10_VJ_4.1.2_V3.1_with_GApps
No I have a Kitkat Android 4.1.2
WiFi doesn't work...
Installed Astro File Manager
Installed wifixmanager.apk to change the region to EU
Finished

alfredoooo said:
The problem Solved.
here is what i did:
Installed Unrevoked3 & root my device
Installed Revolutionary and SA-OFF my device
Installed clockworkmod 5
Installed CM10_VJ_4.1.2_V3.1_with_GApps
No I have a Kitkat Android 4.1.2
WiFi doesn't work...
Installed Astro File Manager
Installed wifixmanager.apk to change the region to EU
Finished
Click to expand...
Click to collapse
K. Reason i asked is because u need the latest recovery (example - 4ext v1.0.0.6) to flash latest kitkat roms.

New problem
Viber can't sync contacs from contacts!
I've installed another contacts apk, but nothing changed

mount2sd doesnt show ext partition
first of all hats off to the fantastic rom and i am excited to see a new soul in HTC Desire codename bravo phone.
coming to my problem
i have a class 10 san disk SD MMC 16gb. i read carefully your partition method and i followed it. and made partitions of 11 and 4 gb fat32 and ext4 respectively(using EXT4 Recovery method).
but
after i installed the mount2sd from playstore it shows
external Not mounted
and not only that in phone/settings/ partition info it says /sdcard (fat) unavailable and same for sd extension.
i am not a techie guy and am unable to proceed further. please help
earlier i used to have AOKP ics4.0.4 rom and used the same card with same partitions and everything was running fine with link2sd.

I've to set up an old Desire and I've installed this rom. Everything works fine except for the gapps. There is no way to install it. Rom, mount2sd were installed in a breath but gapps there is no way.
The flash told me the installation was complete but anything happens. Any idea about that?
Thanks.
[edit] Seems the default browser is not working. As soon as I tap on the icon the app open and suddenly close.

Icon size in power menu
Hi, I have just installed Beanstalk 4.4.4 KiteKat ROM to my HTC Desire (bravo). I noticed strange sized icons in power menu. Icons are very big and hence blurry...
[Solved] I had to set "LCD density" from initial "unknown" to 240. After reboot, problem is fixed.

No MD5 found
Hi guys,
I have a HTC Desire and I tried to flash this rom but after I installed TWRP 2.7.1.0 when I try to install anything I keep getting an error "no md5 found".
Please help me, thanks !

boost
I have the HTC desire 510 from boost mobile. Do I need to root the phone first before installing this rom? Also are there any known problems with SIM card errors from boost?
with my metro phone after I installed a custom ROM it's still asked for a sim unlock code
Thanks and any other advice about thebexperience from boost and this phone feel free to add in

sibsoner77 said:
I have the HTC desire 510 from boost mobile. Do I need to root the phone first before installing this rom? Also are there any known problems with SIM card errors from boost?
with my metro phone after I installed a custom ROM it's still asked for a sim unlock code
Thanks and any other advice about thebexperience from boost and this phone feel free to add in
Click to expand...
Click to collapse
You cant install this Rom, you havnt got HTC desire bravo?
Sent from my HTC Desire S using XDA Free mobile app

Hyeee.....
is this ROM suitable fot HTC Desire 600 Dual Sim?..
Really looking for Kitkat version.
Thanks...

cairo2929 said:
Hyeee.....
is this ROM suitable fot HTC Desire 600 Dual Sim?..
Really looking for Kitkat version.
Thanks...
Click to expand...
Click to collapse
Nope. Why don't you just look for HTC desire 600 forum.
Sent from my HTC Desire S using XDA Free mobile app

Correct me plz
This rom is sooo stylish, with lots of controls, every function is really really working; but there's a problem: as a day passes and by installing say 2 or 3 apps which are not huge (e.g. Telegram, Zapya,etc) it becomes so slow that even for unlocking the screen I'll have to wait more than 10 seconds. The cool & weird thing is there's never been a single FC, but it's just so slow.
Should MMI codes run without any config? Because at the last steps of gettingg credit for the phone it says: MMI canceled.

Error insert sim card sony xperia m cm11

Please help me i'm new to this forum as well as new to rooting and custom rom for mobiles.
I don't know to use forums but anyone can help me please...
I installed CM11 Rom and Gapps and my phone sony xperia m booted correctly but how to enable sim card.
its said at begining sometime about sim card and when i went to enable data it says insert sim card.
now what top do please tell me>....
Do i need to install builds , any terminal commands or anything pls suggest me with text , videos or photos.
Very Urgent plssssssssssssssssss.
email at - [email protected]
or at
[email protected]

What CM11 build are you using? The ones from FXP or the official?

I'm currently experiencing a similar problem. I've installed ZnxtEvolution, and it lags a LOT. I tried installing 6 other ROMs, including CM11 (official). All of them worked, but didn't read my SIM. Please help; I'm sick of this ROM.
PS: I'm guessing there's a kind of zip file to flash, or something..? idk :\

niks2014 said:
Please help me i'm new to this forum as well as new to rooting and custom rom for mobiles.
I don't know to use forums but anyone can help me please...
I installed CM11 Rom and Gapps and my phone sony xperia m booted correctly but how to enable sim card.
its said at begining sometime about sim card and when i went to enable data it says insert sim card.
now what top do please tell me>....
Do i need to install builds , any terminal commands or anything pls suggest me with text , videos or photos.
Very Urgent plssssssssssssssssss.
email at - [email protected]
or at
[email protected]
Click to expand...
Click to collapse
Hey there,
I think I understood what you have told and I have few questions to ask,
First were you on stock 4.3 before flashing?
Second did u wipe cache,data,dalvik and format /system before flashing?
After u installed did u check the Sim subscription it asks after 1st bootup .if not go to settings and do it.
See I am no expert , just a beginner like you are.so hope this helps. Thanks

I don't know how to enable sim from settings.
elmkzgirxp said:
What CM11 build are you using? The ones from FXP or the official?
Click to expand...
Click to collapse
I flashed cm11 after 4,3 xperia m auto upgrade only.
I don't know which cm11 build i flashed it, but at startup of my mobile i was at wifi setting that time some sim message flash but i went away as i touched the wifi screen option by mistake.
can you or anyone else provide me with working sim cm11 build over here or in pm
and also the way to configure sim from settings if not at startup.
Actually after this my mobile undergone a shot circuit itself so needs a repair so can any one estimate what is the cost of repair of such issue, my estimate was 800rs/ 80EUROS as per some website.

niks2014 said:
I flashed cm11 after 4,3 xperia m auto upgrade only.
I don't know which cm11 build i flashed it, but at startup of my mobile i was at wifi setting that time some sim message flash but i went away as i touched the wifi screen option by mistake.
can you or anyone else provide me with working sim cm11 build over here or in pm
and also the way to configure sim from settings if not at startup.
Actually after this my mobile undergone a shot circuit itself so needs a repair so can any one estimate what is the cost of repair of such issue, my estimate was 800rs/ 80EUROS as per some website.
Click to expand...
Click to collapse
I don't really know how much repairs cost, but after the repair, I suggest you do this:
GOING BACK TO STOCK ROM
1. Backup everything you need (messages, contacts).
2. Download a 15.4.A.1.9 firmware (FTF) in here or here, your choice.
3. Download and install Flashtool from here.
4. Place the downloaded firmware to the C:\Flashtool\firmware, or wherever you put your Flashtool installation, as long as it is in "firmware" folder. (Make sure the file you downloaded is in .ftf (file extension), if not and it is in .zip or .rar, then extract it first.)
5. Open Flashtool.
6. Power off your device. (Prepare your USB cord.)
7. Connect your USB cord to your PC FIRST, then hold the volume - down while connecting it to the other end of the cord. (The phone's LED will light up into green (it means it is in flash mode).)
8. Click the lightning button and select Flashmode.
9. Pick the firmware you downloaded earlier, then click Flash. (MAKE SURE there is no option of "TA" in the list on the right side. If you ever find one, uncheck it.)
10. After flashing, remove your phone from your PC, then power it on. (The first boot normally takes longer.)
11. Set-up everything after the boot.
FLASHING CM11
1. Download a custom recovery and flash it. (I'll assume you already know this one.)
2. Download the latest official nightly build from here.
3. After the download, put it in your preferred storage in your phone.
4. Boot into the custom recovery and wipe /data and /cache.
5. Flash the downloaded CM11 ROM.
6. Reboot into system. (Again, the first boot takes longer.)
That's pretty much it. I hope it helps!

i got this too after flashing fxp343, never happen before now back to stock 4.3 again :/

[Q] how to install htc devcenter roms

hi friends
--- i have htc 816w. After unlocking and rooting two months, my touch started not work well. it sometimes doest work, sometimes writes by itself, and sometimes open windows by itself. Because of this problem;
---- i installed some custom roms like "cm-12-20150505-NIGHTLY-a5.zip" and "mokee" and on my mobile. i didnt like them. there were some problems. i want to restore old rom but, i tried reset and everything but i couldnt go back to android 4.4.4.
*my mobile is now "cm-12-20150505-NIGHTLY-a5"
*and android is 5.0.2 .
----????my question: how can i install roms in page
"http://www.htcdev.com/devcenter/downloads"
i want to install this rom. it is 4.4.4
a51dtul-3.10.28-g090104e.zip
can i do it with fastboot or flashing commands on pc ???????
please step bye step

osmanoca said:
hi friends
--- i have htc 816w. After unlocking and rooting two months, my touch started not work well. it sometimes doest work, sometimes writes by itself, and sometimes open windows by itself. Because of this problem;
---- i installed some custom roms like "cm-12-20150505-NIGHTLY-a5.zip" and "mokee" and on my mobile. i didnt like them. there were some problems. i want to restore old rom but, i tried reset and everything but i couldnt go back to android 4.4.4.
*my mobile is now "cm-12-20150505-NIGHTLY-a5"
*and android is 5.0.2 .
----????my question: how can i install roms in page
"http://www.htcdev.com/devcenter/downloads"
i want to install this rom. it is 4.4.4
a51dtul-3.10.28-g090104e.zip
can i do it with fastboot or flashing commands on pc ???????
please step bye step
Click to expand...
Click to collapse
That is not rom but source code and You can't install that. Also watch out for models as You was represent that Your model is 816 (A5) and You was anyway look at sources of A51DTUL!

My Letv X800 us version. have malware. it's install the app automatic.

Help. My Letv X800 us version. have malware. it's install the app automatic without my permission.
It's auto download the app in the background and install the application automatic.
and run it , how to solve this problem.
I'm really in pain.

US/international Le1 pro that is sold worldwide on many web-shops comes with very unpleasant malware package. Several malware/trojans are included in rom. Many users suffered automatic installation of unwanted software, and there will be many more in next days.

Root, flash TWRP and install any RECENT custom ROM. Cuoco 14S for stock experience or latest CM12.1 for good experience. Good luck, you can find all infos in the threads!

I had the same problem and my phone bricked trying to install TWRP. Hope to have a chance this weekend to attempt to unbrick the phone this weekend. Let me know if you find a way to install TWRP, because none of the instructions here worked. For the record, this isn't my first rodeo...I've rooted every smart phone I've ever owned.

ProppaT said:
I had the same problem and my phone bricked trying to install TWRP. Hope to have a chance this weekend to attempt to unbrick the phone this weekend. Let me know if you find a way to install TWRP, because none of the instructions here worked. For the record, this isn't my first rodeo...I've rooted every smart phone I've ever owned.
Click to expand...
Click to collapse
I had the same issue. I couldn't get my phone to boot into any of the ROMS (CM, CUOCO92) with TWRP as my recovery. After a few attempts and a few soft bricks later, I stumbled across this sequence.
1- Flash TWRP 3.0.2. At this point, my phone could only boot into recovery.
2- From TWRP, wipe phone, root, flash custom rom, then reboot into TWRP (recovery).
3- Use Fastboot to flash Stockrecovery.img. Reboot. Your phone will be able to start the CM/CUOCO ROM.

YES..... I can confirm too. this phone is installing stupid apps by itself! I just found today morning that i had a new lock screen! wtf????? I'd flash the phone right away! get your self a new TWRP and a different rom.

You can download US rom by Cuoco92 for the US version + TWRP (version 5.5.014S) here:
LETV LeEco Le1 Pro X800
by Cuoco92 *Official Release*
https://www.facebook.com/cuoco92/info/?entry_point=page_nav_about_item&tab=page_info
Developer's thread (in German):
LeEco (Le1Pro_CN/US) X800+ MULTILANGUAGE ROM CUOCO92

I have also bought X800 -but from Gearbest, my friend that already got his phone told my about the same problem like OP, I wonder if we can simplly just install the official FW from here:
http://bbs.le.com//zt/eui/le_pro1.html
will it work or this FW not competible with our X800?

Darth_h said:
I had the same issue. I couldn't get my phone to boot into any of the ROMS (CM, CUOCO92) with TWRP as my recovery. After a few attempts and a few soft bricks later, I stumbled across this sequence.
1- Flash TWRP 3.0.2. At this point, my phone could only boot into recovery.
2- From TWRP, wipe phone, root, flash custom rom, then reboot into TWRP (recovery).
3- Use Fastboot to flash Stockrecovery.img. Reboot. Your phone will be able to start the CM/CUOCO ROM.
Click to expand...
Click to collapse
can you explain little more : wipe what? , root with su? , step 3 flash Stockrecovery.img . i want to instal cuoco92 5.5.014s and i am new in that .thank you

mastika100cc said:
can you explain little more : wipe what? , root with su? , step 3 flash Stockrecovery.img . i want to instal cuoco92 5.5.014s and i am new in that .thank you
Click to expand...
Click to collapse
Go to this site,it's in Italian but everything you need is here.
http://www.androidiani.com/forum/mo...rsione-usa-ovvero-le1pro_us-marchiato-ce.html

tc0566 said:
Go to this site,it's in Italian but everything you need is here.
my question is : did anyone succeed to install cuoco92 (5.5.012s or 5.5.014s) on phone with malware without bricking it and if answer is yes - to explain how he did this step by step , because it s very important . my phone is us version and eui 5.5.011s , youtube app and browser not working.
Click to expand...
Click to collapse

http://showtop.info/letv-leeco-malware-removal-fixing-boot-loop-problems/
https://sites.google.com/site/l1prousx800/
This might be of assistance.

finally i did it : flashed twrp3.0.2 , root with su 2.76 and malware killed. thanks to all of you for your help !!!

mastika100cc said:
finally i did it : flashed twrp3.0.2 , root with su 2.76 and malware killed. thanks to all of you for your help !!!
Click to expand...
Click to collapse
Masti a can you explain the steps u followed?. As I am facing the same problem my data pack gets exhausted in a day or two due to all mallware installation.

kamaljit.lote said:
Masti a can you explain the steps u followed?. As I am facing the same problem my data pack gets exhausted in a day or two due to all mallware installation.
Click to expand...
Click to collapse
first of all what win you use ?

I am using Win10 on my PC.

kamaljit.lote said:
I am using Win10 on my PC.
Click to expand...
Click to collapse
i use win 8.1 and i am not sure about install of drivers on win 10 .
so look at this post: http://showtop.info/letv-leeco-malware-removal-fixing-boot-loop-problems/
and this : http://showtop.info/download-flash-...-version-fix-missing-software-update-youtube/
i do it as hi did but install drivers different way .
try and if you have any trouble write again

anyone who have this problem follow this => work great
1) download file update.zip as is into the root directory of the phone storage (root directory means not in any folders) from here : https://sites.google.com/site/l1prousx800/
2) power off phone
3) hold power and volume+up button at the same time to boot into recovery
4) select update
5) the update should take about a minute and the phone will reboot, and you're done.

I just got a US version today. How do I know if I have malware? I haven't seen anything untoward happening yet

chr0m said:
I just got a US version today. How do I know if I have malware? I haven't seen anything untoward happening yet
Click to expand...
Click to collapse
You almost certainly have malware, install the update mentioned above
anyone who have this problem follow this => work great
1) download file update.zip as is into the root directory of the phone storage (root directory means not in any folders) from here : https://sites.google.com/site/l1prousx800/
2) power off phone
3) hold power and volume+up button at the same time to boot into recovery
4) select update
5) the update should take about a minute and the phone will reboot, and you're done.