Related
Hey,
I recently bought this phone Huawei U8500, and I had a long search on the net where can I get a working recovery, finally I found a modified clockworkmod recovery.
It seems that this phone is highly unpopular.
I just wanted to share my finding.
Here you can download this modified version: Download
Steps to install recovery:
1. Download the clockworkmod
2. Unrar it somewhere on your computer
3. Turn off your phone
4. Press & Hold volume down key + call end (red) key and then press power key.
5. Launch the .bat file on your computer + connect your phone via USB
6. When it's finished, take out the battery and wait 5 seconds before putting it back in
7. Then you can access the recovery by holding volume up key + call(green) key
---------------------------------------------------------------------------------------
One thing I can recommend If your phones android build version doesn't end with "712", I suggest you to update it to the beta release, you'll have more functional dual-touch.
Here is the beta froyo update: Download
To install it:
1. Unrar it to your computer, and find a folder named "dload" with the biggest size.
2. Copy that "dload" filder to root of your SD card
3. turn off phone
4. Hold volume up key + end call (red) key and the press power key. Wait for it to load, it will say something like "Updating system" Wait for it to finish, if it says fail, just try again
5. After it says "Update complete" or "Update successful" just restart your phone and you'll have the new beta firmware.
--------------------------------------------------------------------------------------
In the Russian site I found some unofficial ROM's too.
I haven't tried them yes but if someone is willing here you can download them:
Firmware 2.2 29.01.2011 by Pavlo78
u8500_mao_rls7b2
u8500_mao_rls7++by_march_2
u8500_mao_rls8_by_march
u8500_mao_rls8_by_march
To install one of these ROM's do the following:
1. Copy the ZIP file on root of your SD card, the ZIP file, not RAR.
2. Boot up your phone in recovery mode (by holding volume up key + call(green) key)
3. With your optical trackpad select "Install zip from sd card"
4. From the list choose your ZIP file
5. And then just wait till the installation is complete and then just restart the phone!
------------------------------------------------------------------------------------------
I highly recommend you to back up the original firmware before installing new ROM's
You can do that in recovery mode, just click on nandroid and follow the on screen instructions it will backup your current firmware + your currently installed apps.
I'm not responsible for bricking your phone, if something doesn't go well. By doing the things I wrote, you may void your phones warranty.
Don't forget to thank me
Kind regards
xcoder_123
Bro, may i have to wipe all data via recovery like slash,cache and dalvik cache before i install froyo beta?
This is really helpful...a lot of Bangladeshis will be needing this. Telenor just launched this phone here.
I am using Huawei U8500 (Local branded as GrameenPhone Crystal). I have backed up my current ROM using ROM Manager. Can anyone confirm that the back-up ROM contains all the information including the Customized Branding???
Grameenphone Crystal Firmware U8500
In case You messed up
U8500 V100R001BGDC128B277 (Bengal GP)
Code:
//huaweidevice.com/worldwide/downloadCenter.do?method=downloadFile&flay=software&fileName=38766&attachmentName=U8500V100R001BGDC128B277.zip
monirr said:
In case You messed up
U8500 V100R001BGDC128B277 (Bengal GP)
Code:
//huaweidevice.com/worldwide/downloadCenter.do?method=downloadFile&flay=software&fileName=38766&attachmentName=U8500V100R001BGDC128B277.zip
Click to expand...
Click to collapse
Hi Monirr,
Can u confirm whether the link u provided is for only software upgrade or I can use it as a complete ROM backup (So that I can use it later in case of any failure to Upgrade the OS)
SAJUSIGMA said:
Hi Monirr,
Can u confirm whether the link u provided is for only software upgrade or I can use it as a complete ROM backup (So that I can use it later in case of any failure to Upgrade the OS)
Click to expand...
Click to collapse
Yah This one is the complete stock rom. I checked and found gps preloaded rom and this one is identical.
So no worry about Warranty. just load it when you need to go to gps Customer care.
monirr said:
In case You messed up
U8500 V100R001BGDC128B277 (Bengal GP)
Code:
//huaweidevice.com/worldwide/downloadCenter.do?method=downloadFile&flay=software&fileName=38766&attachmentName=U8500V100R001BGDC128B277.zip
Click to expand...
Click to collapse
10x a lot, monirr, I waz searchin this stock rom ... & do u kno if itz upgradeable 2 Android 2.3.4 or any1 upgraded?
hey im thinking bout buying this phone as i live in bangladesh... can anyone confirm me about the froyo upgrade does it work???
I did download the beta firmware.
And updated the phone's firmware a few minutes ago.
I have the dual touch now, yay (and a little better keyboard).
Many thanks from a Droid noob.
This should be enough for all your stock rom needs.
http://wiki.modaco.com/index.php/Huawei_Firmware_U8500
BTW: If you install the clockwordmod, you will lose the GP stock bootup screen (not the boot animation). So if you are going to claim warranty make sure you flash the GP firmware before you go to the GP centre.
Someone was asking how this phone is...the only issue I have is knowing that I'll never have flash on this thanks to the arm6 processor.
monirr said:
In case You messed up
U8500 V100R001BGDC128B277 (Bengal GP)
Code:
//huaweidevice.com/worldwide/downloadCenter.do?method=downloadFile&flay=software&fileName=38766&attachmentName=U8500V100R001BGDC128B277.zip
Click to expand...
Click to collapse
To upgrade my gp crystal to 2.2 , which one is best rom to download?
or can this model is upgradable to 2.3?pl help.
taavu said:
I did download the beta firmware.
And updated the phone's firmware a few minutes ago.
I have the dual touch now, yay (and a little better keyboard).
Many thanks from a Droid noob.
Click to expand...
Click to collapse
which version you download in which model
taavu said:
I did download the beta firmware.
And updated the phone's firmware a few minutes ago.
I have the dual touch now, yay (and a little better keyboard).
Many thanks from a Droid noob.
Click to expand...
Click to collapse
which beta firmware you download in which model?
ROBINGAZI said:
This should be enough for all your stock rom needs.
http://wiki.modaco.com/index.php/Huawei_Firmware_U8500
BTW: If you install the clockwordmod, you will lose the GP stock bootup screen (not the boot animation). So if you are going to claim warranty make sure you flash the GP firmware before you go to the GP centre.
Someone was asking how this phone is...the only issue I have is knowing that I'll never have flash on this thanks to the arm6 processor.
Click to expand...
Click to collapse
in gp crystal, through rom manager, if i install clockwordmod then a phone list appear , but there no option of this model(u8500). How can i install?
mostafiztuhin said:
in gp crystal, through rom manager, if i install clockwordmod then a phone list appear , but there no option of this model(u8500). How can i install?
Click to expand...
Click to collapse
see the first post of this thread.
mostafiztuhin said:
To upgrade my gp crystal to 2.2 , which one is best rom to download?
or can this model is upgradable to 2.3?pl help.
Click to expand...
Click to collapse
There is a thread in the port section of the Cyanogenmod forum. It started with a lame question but later a lot was discussed about gingerbread 2.3.4. There is a Chinese developer (Slax) who has been working on the rom. However, this rom does have a few issues.
I don't know Chinese and google translate is incomprehensible. You should be able to find all the links needed in the cyanogenmod forum.
here is the link.
http://forum.cyanogenmod.com/topic/21467-huawei-u8500/
for froyo try trial and error with all the official roms. if you don't like one change it. eventually you will find one that meets your need.
monirr said:
In case You messed up
U8500 V100R001BGDC128B277 (Bengal GP)
Code:
//huaweidevice.com/worldwide/downloadCenter.do?method=downloadFile&flay=software&fileName=38766&attachmentName=U8500V100R001BGDC128B277.zip
Click to expand...
Click to collapse
Dear bro,
This link doesn't work. Pls, help me with a active link.
Thanks in advance.
Hello XCoder, and all!
I try this steps, but i stopped after 4th step...
I get a boot logo, and the XP can't recognize droid, unknown device.
than the .bat file just wait for connection.
i try lot of drivers (original U8500, Original Android, and the SDK's driver too) and still "unknown Andoid device"
If i get out battery, take back, and standard Power On, the XP recognize the "Android Composite ADB" device, and bind the SD card, and CDROM image, and works perfectly.
but i can't upgrade in Standard Mode
can anyone have an idea, how i can access the Droid under Recovery Mode?
and all links of huaweidevice.com are unavailable
have new link?
regards, QSoft
qsoft73 said:
Hello XCoder, and all!
I try this steps, but i stopped after 4th step...
I get a boot logo, and the XP can't recognize droid, unknown device.
than the .bat file just wait for connection.
i try lot of drivers (original U8500, Original Android, and the SDK's driver too) and still "unknown Andoid device"
If i get out battery, take back, and standard Power On, the XP recognize the "Android Composite ADB" device, and bind the SD card, and CDROM image, and works perfectly.
but i can't upgrade in Standard Mode
can anyone have an idea, how i can access the Droid under Recovery Mode?
and all links of huaweidevice.com are unavailable
have new link?
regards, QSoft
Click to expand...
Click to collapse
I have same problem here
Root and GAPPS instruction for TCL P600
Since TCL P600, TCL P606 and Alcatel One Touch Snap 7025D are the same phones I just write about TCL P600 now. But it's working for both.
TCL P600 root package: http://www.4shared.com/zip/3HRtqraE/TCL_P600_Root.html
HowTo Root TCL P600:
- Extract the file
- Start the flash tool in extracted folder
- Make sure under options it is choosen “with battery”
- In FlashTool load scatter file contained in folder
- Click checkboxes of BOOTIMG and RECOVERY
- Doubleclick on BOOTIMG and refer to TCL-P600_130417__boot_patched_130508-162244.img
- Doubleclick on RECOVERY and refer to TCL-P600_130417__recovery_130508-162244.img
- Switch off mobile and unplug it from usb
- Click “download” in flash tool
- Plug in usb in phone
- If you get a green circle from flash tool saying OK you’re ready with root shell
- Unplug phone and reboot into CWM
- Start Droidtools and plugin usb to phone again
- Install superuser of your choice into phone.
- Ready – you have full root to phone.
If you experience any problems please check if you used the right drivers. Please check drivers attached in folders. Only use them.
Here is the JB gapps zip for flashing with CWM: http://goo.im/gapps/gapps-jb-20121011-signed.zip
Full instruction of getting a well working TCL P600:
1. First of all I updated the phone with TCL updater to the latest firmware.
2. I rooted it as I described before.
3. I deleted lots of China Apps and also under system/media bootup sounds and some - for me - other stuff not needed in order to get more space on system partition.
4. I installed GAPPS through CWM. I did it with this one: http://goo.im/gapps/gapps-jb-20121011-signed.zip
After rebooting I got crash of google search. I ignored it and added my google account. After opening playstore then I got update for google search. After updating there is no crashing anymore.
All other gapps are working quite well. I tested GPS for the TCL P600 and was really suprised it works quite fast and accurate.
The only thing: There is no A-GPS setting. Let's say: There is no GPS setting at all. You can only switch GPS on and off. Settings are not included. Maybe this will be unlocked with a modded rom.
I'm now testing all functions in detail but up to now it works really great.
Hope you got it also up to this point. After all steps this phone is really perfect.
------------------
If you brick your phone you have a brick Not my fault. I don't take responsibility of that my instruction will work for you. It worked for me. So now it's up to you.
I tried what you say but no thing happened .
I have alcatel one touch snap
Where can i buy
Mr.Mahmoud.Pro said:
I tried what you say but no thing happened .
I have alcatel one touch snap
Click to expand...
Click to collapse
Hi Mahmoud,
I want to know where you bought the mobile.. i was searching a lot over the internet and local stores to buy "alcatel one touch snap 7025D" mobile but i couldn't find it anywhere in my area (Andhra pradesh, India.) can you please tell a place or online website where i can find the mobile?
internal memory
hey i'm want to know if the root is swap bet. internal & external memory
that for games over 3 Gega
Custom Recovery
Hey i want to know if this recovery can be ported to my phone the alcatel one touch fierce it is the same as th one touch snap/7025d just without the 8mp camera and splash water proofing everything else is the same i had tried the aoutomatic port for CRR recovery but when it flashed the recovery i got a security error on my alcatel that says "error 101 unaouthorized software installed "it would not boot upand was bricked i bought the same phone again and i am wondering how y'all ported it to the fierces sister phone the one touch snap .thanks and have a great day
I don't know about porting possibility. I guess there is no way. This thread is not about changing the ROM but just how to root the TCL. There is no custom ROM out actually. So I don't see chances to port. Why should this be necessary? Is the stock ROM having problems?
Gesendet von meinem GT-N8000 mit Tapatalk
hello weimerd
my problem is that I have rooted the phone but when i delete Chinese applications to install gapps I deleted the app that handles the notification bar and other things, don't have notifications bar
the keyboard works, after loading another
google search don't work
Do I have to reload the firmware? Where do I can download the stock rom P606 TCL? to star again.
or
How I can recover this app? Can you pass me the app that has that control?
Can you say that apps I have to delete?
sorry by my english
weimerd said:
I don't know about porting possibility. I guess there is no way. This thread is not about changing the ROM but just how to root the TCL. There is no custom ROM out actually. So I don't see chances to port. Why should this be necessary? Is the stock ROM having problems?
Gesendet von meinem GT-N8000 mit Tapatalk
Click to expand...
Click to collapse
NO i just want to see if thos recovery could work in the case that ne2w rom development would occur and to create a backup for people who need it that is why i wanted to see if it could be ported
Solved the problems
Solved the problems.
I was able to upgrade wiht "TCL 2.7.4 Updater Setup.exe" the mobile software, I had the "TCL 2.7.9 Updater Setup.exe" version and this version told me it was updated. When I tested with 2.7.4 has recharged my sw and have gone back to the top, I rooted again with wiemerd instructions and now everything has worked correctly.
Thank you for your instructions and weimerd Sixpenny by spend "TCL S 2.7.4 Updater Setup.exe" saved me.
:laugh::laugh::laugh::laugh::good::good::good::good::good:
Hi all.
Is possible to port or create any custom rom for this device?
Thanks
Hi,
i have Snap 7025X, can this root steps bee used for that version too? Looks like OS is same, i have SIM management even i have 1 sim card.
root ^^^^^
Yeah this root will work if not try kingo root its great plus its one click just t urn on debugging. And make sure that your pc recognizes the phone also try motochopper
angort14 said:
Yeah this root will work if not try kingo root its great plus its one click just t urn on debugging. And make sure that your pc recognizes the phone also try motochopper
Click to expand...
Click to collapse
Thank you, i will try. I must install some other version of OS, official is fully bugged. After i used ROMs from xda for last 2 years, on my old phone, i forgot how bugged is official android.
There are so much crashes with official version, corupted SD card and so on...
please help me. after reflashing of my rom with flash tool. i have lost my imei and i have not done backup of my efs. my alcatel ot 7025d can't recognize any sim. i need efs backup or way to solve of my problem. i live in ivory coast there are not alcatel sav in this country.
I used kingo for root. Its really one click root tool. If your phone is rooted, you can restore to default. You can try to restore it with that tool.
Anyone know where to download Custom Boot Loader and Newer version of OS?
I have huge problem with this phone. There is all the time problem with memory card. I am using kingston class 10, 16gb memory but from time to time, after i take some picture or use default gallery, i get message that my memory card is corrupted. I need to restart phone and everything is ok, but sometimes it require even 3-5-7 restarts and its really anoying. Cant take pictures, use ringtone from memory cartd etc.
I tried with official updater but still use 4.2.1 version. Anyone have any newer custom rom?
Sorry for off topic but i am sure that this problems can be solved with some newer OS.
Pavankumar1889 said:
Hi Mahmoud,
I want to know where you bought the mobile.. i was searching a lot over the internet and local stores to buy "alcatel one touch snap 7025D" mobile but i couldn't find it anywhere in my area (Andhra pradesh, India.) can you please tell a place or online website where i can find the mobile?
Click to expand...
Click to collapse
You have a credit card to buy online ????
EmptySD said:
I used kingo for root. Its really one click root tool. If your phone is rooted, you can restore to default. You can try to restore it with that tool.
Anyone know where to download Custom Boot Loader and Newer version of OS?
I have huge problem with this phone. There is all the time problem with memory card. I am using kingston class 10, 16gb memory but from time to time, after i take some picture or use default gallery, i get message that my memory card is corrupted. I need to restart phone and everything is ok, but sometimes it require even 3-5-7 restarts and its really anoying. Cant take pictures, use ringtone from memory cartd etc.
I tried with official updater but still use 4.2.1 version. Anyone have any newer custom rom?
Sorry for off topic but i am sure that this problems can be solved with some newer OS.
Click to expand...
Click to collapse
I have the same problem, did you get any solution?
Regards
jobenja5 said:
I have the same problem, did you get any solution?
Regards
Click to expand...
Click to collapse
I mentored few problems, i dont know what do you mean.
EmptySD said:
I mentored few problems, i dont know what do you mean.
Click to expand...
Click to collapse
Have you solved the problem with the SD error?
jobenja5 said:
Have you solved the problem with the SD error?
Click to expand...
Click to collapse
Yes, buy new card I tried million things, formatted card using computer, phone, different phone etc. At the end, i bought new card and there is no problems at all. I give my card to my gf and she is using card without problem for last half year.
Hello.
So my N7100 doesn't connect to mobile network. No voice calls, text messages or mobile internet. Wifi works just fine, although signal seems to be a little weaker (maybe just my imagination).
What I did and how it happened:
I got sick of Samsung being assholes and not pushing out software updates, so I decided to flash some custom ROM. I choose CM, because they had that "one click installation", so I didn't have to do a lot of work. After a week of using CM I decided that it sucks and wanted back my original android with all gimmicks from Samsung, mostly because battery life with CM was terrible, not even one day. And that's when everything went downhill. I downloaded and installed firmware for Baltic region, because I live here and I bought my phone here. From that moment my phone stopped being phone and evolved into wifi only tablet. After being very pissed and trying to flash couple different roms I gave up. Found my phones original box user manual and other papers. It turns out that my phone is made for Hungary region. So shop where I bought it must have imported wrong models (most likely cheaper for bigger profit). Flashing original for Hungary made firmware doesn't resolve this issue.
Guys, I really need help. I just want to return to stock - original firmware and reset flashing counter. Please help, and if possible in layman's terms...
EddsLV said:
Hello.
So my N7100 doesn't connect to mobile network. No voice calls, text messages or mobile internet. Wifi works just fine, although signal seems to be a little weaker (maybe just my imagination).
What I did and how it happened:
I got sick of Samsung being assholes and not pushing out software updates, so I decided to flash some custom ROM. I choose CM, because they had that "one click installation", so I didn't have to do a lot of work. After a week of using CM I decided that it sucks and wanted back my original android with all gimmicks from Samsung, mostly because battery life with CM was terrible, not even one day. And that's when everything went downhill. I downloaded and installed firmware for Baltic region, because I live here and I bought my phone here. From that moment my phone stopped being phone and evolved into wifi only tablet. After being very pissed and trying to flash couple different roms I gave up. Found my phones original box user manual and other papers. It turns out that my phone is made for Hungary region. So shop where I bought it must have imported wrong models (most likely cheaper for bigger profit). Flashing original for Hungary made firmware doesn't resolve this issue.
Guys, I really need help. I just want to return to stock - original firmware and reset flashing counter. Please help, and if possible in layman's terms...
Click to expand...
Click to collapse
Press *#06# and see if your EMEI is fine... If it says something like 000000000049 it seems to be bugged and you can try this solution:
I flashed the firmware N7100XXDMF2_N7100OLBDMD2_XME using ODIN PC and follow the below using root explorer:
- copy /efs/ to the sdcard
- delete /efs/
- reboot (after reboot I got the yellow recovery mode window floating over, no lock screen, and pressing power button turns the phone off directly)
- /efs/ will be autocreated again. copy the efs folder from the sd card to / (root explorer will tell you that the folder already exists and it will merge them)
- reboot
PS: I did not have an /efs/ backup before applying the above.
Click to expand...
Click to collapse
I saw from another post. Im going to try this too since Im having the same problem as you.
Find your ROM here: http://www.sammobile.com/firmwares/1/?model=GT-N7100&pcode=CHE#firmware I selected Chile Entel, but you can choose your country and company, it is the original ROM and it should fix our problem, Im downloading the ROM by now.
To use Odin, just put your phone in download mode (vol up/down + home + power) and then plug in to your PC, open Odin and at "PDA" select your ROM, then put start and just wait a few minutes and it should be working again...
After this, you should make a back up of your EFS file using a root explorer and then flash with any ROM you want (Im trying Ditto 3, it seems to be a cool jelly bean) and after this flash, you should put your new EFS file... Just the problem that Im facing is how to put this backup since the EFS is a folder being readed all the time, so there should be a program to do this, but I cant figure this out yet.
My phone doesn't have any IMEI any more. "null/null" is value given by my phone after requesting IMEI. I already flashed original ROM, problem is still here.
About /efs/ I could backup it with "File Manager"app from google play, but I can't delete it, because it is in read only.
EddsLV said:
My phone doesn't have any IMEI any more. "null/null" is value given by my phone after requesting IMEI. I already flashed original ROM, problem is still here.
About /efs/ I could backup it with "File Manager"app from google play, but I can't delete it, because it is in read only.
Click to expand...
Click to collapse
Somehow you will have to access to edit it and you will be able to solve that problem... Otherwise go to technical service.
kito2 said:
Somehow you will have to access to edit it and you will be able to solve that problem... Otherwise go to technical service.
Click to expand...
Click to collapse
In order to delete /efs/ you have to be rooted, when you flash factory rom you loose root privileges.
EddsLV said:
In order to delete /efs/ you have to be rooted, when you flash factory rom you loose root privileges.
Click to expand...
Click to collapse
After flash factory rom is easy to make root again hehe.. Anyways keep reading and maybe you will find another solution, you can't be the only one who had that problem... Good luck my friend.
Try this link http://forum.xda-developers.com/showthread.php?t=1896696
kito2 said:
After flash factory rom is easy to make root again hehe.. Anyways keep reading and maybe you will find another solution, you can't be the only one who had that problem... Good luck my friend.
Click to expand...
Click to collapse
Thanks. So I rooted my phone and did all than you wrote above - copied, deleted, replaced. It didn't helped and now I have that yeleow recovery window all the time :/
Q&A for [ROM][5.1] Candy 5 - Hercules [ALPHA]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][5.1] Candy 5 - Hercules [ALPHA]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
hello there,
Has anyone tried to take a picture with flash on?
i'm using candy 5.0 and anh my phone will reboot immediately when ever i take picture with flash on...
chjcken12 said:
hello there,
Has anyone tried to take a picture with flash on?
i'm using candy 5.0 and anh my phone will reboot immediately when ever i take picture with flash on...
Click to expand...
Click to collapse
You are the first to report this issue.
The latest is Candy5 v2.1.0 in Post #2 (Android 5.1.1). Try the latest and clean flash. If it still does this, I need logcat logs showing the problem if I'm going to have any chance at fixing it. Paste a log on Pastebin.com and link it back here.
OK, I installed the last version (5.1.1 from 20150422) and everything seems to be working, at first boot I had no signal at all so I restarted my phone... and no signal.
Rebooted to recovery and installed Zero Gapps from slim, reboot system, no signal
The I attempted to add my google account and after conecting my phone to the wifi it got signal, went to APN config and my companies APN is there, Data seems to work OK, phone and messages works as well
Connect my phone to wifi seems to solve the problem
Thanks Dan!
NoSpamDan said:
You are the first to report this issue.
The latest is Candy5 v2.1.0 in Post #2 (Android 5.1.1). Try the latest and clean flash. If it still does this, I need logcat logs showing the problem if I'm going to have any chance at fixing it. Paste a log on Pastebin.com and link it back here.
Click to expand...
Click to collapse
thanks for always support your user
i tried a third-party camera app, and that camera app work fine with flash on, while stock camera still has that problem,
now i will try to update to candy 5.1
data not working.
I like the rom but data not stable. I did a clean install. If wifi turned off I lose mobile. but am looking forward to this rom i love my s2
same here dont have wifi
same here dont have wifi
hillinsf said:
I like the rom but data not stable. I did a clean install. If wifi turned off I lose mobile. but am looking forward to this rom i love my s2
Click to expand...
Click to collapse
mickeymichael said:
same here dont have wifi
Click to expand...
Click to collapse
This is an issue affecting many devices on LP5.1. I believe it is upstream and will get fixed in due time...
hello NoSpam Dan
i connect my phone to PC and choose Mass storage but only my 2GB SD card showed up in My computer window, neither internal storage!
Can you guide me to make the internal storage connect to my PC?
sorry for my bad english, hope you understand what i say
USB ?
I did clean install with new build , the data is much better but... when i try to enable usb it wont give me a menu when i enable it in developer then go to storage and press the settings it shows usb connection and i click it and no menu , the rom is great but really need the usb to work for daily driver , almost there
chjcken12 said:
hello NoSpam Dan
i connect my phone to PC and choose Mass storage but only my 2GB SD card showed up in My computer window, neither internal storage!
Can you guide me to make the internal storage connect to my PC?
sorry for my bad english, hope you understand what i say
Click to expand...
Click to collapse
Can you mount storage in recovery mode?
Check your Device Manager carefully for Nexus or ADB devices (if you're on Windows). If you find something like this, try to change it to a USB Storage Device.
NoSpamDan said:
Can you mount storage in recovery mode?
Check your Device Manager carefully for Nexus or ADB devices (if you're on Windows). If you find something like this, try to change it to a USB Storage Device.
Click to expand...
Click to collapse
i cant find anything like you said, it just an Android CompositeADB Interface i installed recently for android app debugging..
can you tell me more detail about this issue
chjcken12 said:
i cant find anything like you said, it just an Android CompositeADB Interface i installed recently for android app debugging..
can you tell me more detail about this issue
Click to expand...
Click to collapse
Sometimes you can right click that ADB interface and choose "Update driver". Then select manual and choose USB Mass Storage Device.
Depends on the drivers you are using. I haven't changed the connection methods, but that doesn't mean they haven't changed somewhere in the upstream code...
Nice rom but vibrating and does not turn on after restart
I installed in on cwm 6.0.2 and worked eith bugless and smooth i inserted sim it asked to restart and i restart and then it turn on at samsung and then vibrates every second then reboots every time.I don't think that at time of restart my battery was only 10% at the time of restart.Help me for any answer but tried to enter cwm but failed power on key gets automatically pressed
Zubair66 said:
I installed in on cwm 6.0.2 and worked eith bugless and smooth i inserted sim it asked to restart and i restart and then it turn on at samsung and then vibrates every second then reboots every time.I don't think that at time of restart my battery was only 10% at the time of restart.Help me for any answer but tried to enter cwm but failed power on key gets automatically pressed
Click to expand...
Click to collapse
You seem to have a stuck power button. @vincom has a 1-Stop sticky thread that is linked in my signature. Although that's for the Skyrocket, you might find some of it useful for the Hercules as well.
Does not turn on on vibrates and auto restart
Rom successfully installed and eorks later i put sim and restart and phone .It turn on automatically and after samsung logo it starts vibrating continously then restart but when i tries to enter recovery mode it automatically restarts
Zubair66 said:
Rom successfully installed and eorks later i put sim and restart and phone .It turn on automatically and after samsung logo it starts vibrating continously then restart but when i tries to enter recovery mode it automatically restarts
Click to expand...
Click to collapse
You need to give more details please.
- What recovery are you using?
- What GApps package?
- Did you repartition your device?
Full wipe, and try flashing only the ROM, without restoring any backup data, and see how it goes.
Or as I said, stuck power button.
how to root galaxy s2 t mobile version running on candy 5.1 lollipop
i lost my root access after i installed lollipop 5.1 custom rom. pls how do i reroot it
desmond4life said:
i lost my root access after i installed lollipop 5.1 custom rom. pls how do i reroot it
Click to expand...
Click to collapse
This ROM? Root is built in.
Try a full wipe and reflashing.
MY galaxy s2 t mobile version not charging after flashing candy 5 rom
i was running android 4.0.4ics stock and it was charging fine, but recently i flashed candy5 custom rom and my galaxy s2 is now on android 5.1 lollipop, but i noticed that my phone is no longer charging. once i plug in my charger, it will display charging for some few seconds and then it will stop and remain that way. even when i switch off, and then plug the charger, the battery icon will be counting without actualy charging. but if i restore my android 4.0 stock backup, it will be charging fine. pls i need help.
Hello,
I haven't found in this big repository which is XDA any good ROM for HTC desire 620 (single sim), but i found it in other place in internet and i decide to share with you guys. This forum is missing special section for phone HTC desire 620 and i have to write it here in general "desire" section and becouse of "To prevent spam, you must have a higher post count in order to make a new thread in this development section.�But feel free to make new thread in the non-development sections like General, Q&A, etc. Thanks for your understanding!" I'm force to write this thread in General Secion. I hope there is not big deal with this and moderator will not delete it rather moving it to right section and let the others desire 620 users take benefits of such good ROM from CM.
The source of the rom is taken from: http://forum.android.com.pl/topic/245169-rom-recovery-cyanogenmod-121/
and i add some my coments to it.
cm-12.1-20160106-UNOFFICIAL-a31ul.zip
GAPPS
ARM -> 5.1 -> "choose"
Personaly recomend "pico" you can always install other google apps from google play store
TWRP
twrp 3.2.0-0 newest version work for meRoot SuperSUDownloand Zip file. Latest(V2.82) version work for me.
STEPS:
1. Unlock your Bootloader.
Register on site https://www.htcdev.com/bootloader/and simply follow the steps
2. Install TWRP.
https://www.xda-developers.com/how-to-install-twrp/
3. Do backup of your current system via TWRP.
4. Do wipe/factory reset
5. Install ROM.
6. Install gapps.
7. Install SuperSU.
8. Restart phone and enjoy! :highfive:
Bugs foud so far by me, to confirm:
- display percent of battery in battery icon on bar is not working
display percent of battery next to icon or hide percent is work fine.
Edit: Now it's working. I think it's after install Theme for CM12 from Play Store.
- Flash light and Torch dont work when battery is low and there is no information about it.
Kryspus said:
Hello,
I haven't found in this big repository which is XDA any good ROM for HTC desire 620 (single sim), but i found it in other place in internet and i decide to share with you guys. This forum is missing special section for phone HTC desire 620 and i have to write it here in general "desire" section and becouse of "To prevent spam, you must have a higher post count in order to make a new thread in this development section.�But feel free to make new thread in the non-development sections like General, Q&A, etc. Thanks for your understanding!" I'm force to write this thread in General Secion. I hope there is not big deal with this and moderator will not delete it rather moving it to right section and let the others desire 620 users take benefits of such good ROM from CM.
The source of the rom is taken from: http://forum.android.com.pl/topic/245169-rom-recovery-cyanogenmod-121/
and i add some my coments to it.
cm-12.1-20160106-UNOFFICIAL-a31ul.zip
GAPPS
ARM -> 5.1 -> "choose"
Personaly recomend "pico" you can always install other google apps from google play store
TWRP
twrp 3.2.0-0 newest version work for meRoot SuperSUDownloand Zip file. Latest(V2.82) version work for me.
STEPS:
1. Unlock your Bootloader.
Register on site https://www.htcdev.com/bootloader/and simply follow the steps
2. Install TWRP.
https://www.xda-developers.com/how-to-install-twrp/
3. Do backup of your current system via TWRP.
4. Do wipe/factory reset
5. Install ROM.
6. Install gapps.
7. Install SuperSU.
8. Restart phone and enjoy! :highfive:
Bugs foud so far by me, to confirm:
- display percent of battery in battery icon on bar is not working
display percent of battery next to icon or hide percent is work fine.
Edit: Now it's working. I think it's after install Theme for CM12 from Play Store.
- Flash light and Torch dont work when battery is low and there is no information about it.
Click to expand...
Click to collapse
i am trying to find a rom for the HTC desire 620 right now as i have just got one to keep me going till i get an upgrade in a few months.... Is there any others you know of?
Problem with CM 12.1 for HTC Desire 620
Please guys I just successfully flashed CM 12.1 on my HTC Desire 620 it worked well at first but after i downloaded some apps from play store, my device just blacked out and started showing CM boot animation for several minutes, then it showed android is starting optimising apps after optimising, I thought the device will boot but it went back to the CM boot animation and that is how it has been doing. I have used TWRP to do a wipe now everything is normal but if I download or install an app the problem starts again. Please I need your help
I have a htc desire 620g dual sim, whats this custom rom support this phone ?
Lost IMEI after factory resetting and flashing a ROM (rooted) ! HTC DESIRE 620g dual
Can someone help me with this problem?
I have tried all the methods to repair the IMEI, but none of them worked. Even I tried flashing a new ROM (CM13) and now I cant even enter the ENGINEERING MODE , says that engineeringmode.apk is not installed. But even though I have accessed engineering mode in a different rom, the CDS info option was not highlighted to be clicked on and I couldn't fix it.
Please someone help me with this problem
subinsunil said:
Can someone help me with this problem?
I have tried all the methods to repair the IMEI, but none of them worked. Even I tried flashing a new ROM (CM13) and now I cant even enter the ENGINEERING MODE , says that engineeringmode.apk is not installed. But even though I have accessed engineering mode in a different rom, the CDS info option was not highlighted to be clicked on and I couldn't fix it.
Please someone help me with this problem
Click to expand...
Click to collapse
Where did you find CM 13
Solution for invalid imei on Htc desire 620
If your device is custom rom and showing invalid imei ,then firstly flash stock rom on your htc desire 620 with flash tool in PC. Then note down your imei no.(printed on back of your phone). Root your mobile with kingroot.apk. Install chamlephon on your device. Then type your imei manually on that application.then restart.your imei will be repaired.
If you want to install custom roms then firstly install Mobile uncle tool and select backup and restore IMEI then backup the imei to extsdcard. Then flash your custom rom. And if its showing imei error then root with kingroot.apk and install mobileuncle tool.apk,then select restore imei from extsdcard then reboot.IMEI will surely get soluted. Hit helpfull if you like this thread.
Hi,GPS is working ?
subinsunil said:
Can someone help me with this problem?
I have tried all the methods to repair the IMEI, but none of them worked. Even I tried flashing a new ROM (CM13) and now I cant even enter the ENGINEERING MODE , says that engineeringmode.apk is not installed. But even though I have accessed engineering mode in a different rom, the CDS info option was not highlighted to be clicked on and I couldn't fix it.
Please someone help me with this problem
Click to expand...
Click to collapse
Try fix from attachment. Found it here: https://forum.xda-developers.com/showpost.php?p=74842530&postcount=464
is there some newer android version ? lineage port ?
can you guys share the link of this rom? It asks for access from this link. but I can't reach the producer
Hello, I need the rom file. Can you grant access? Or can you upload it to a different link?
@Kryspus