Root and GAPPS instruction for TCL P600
Since TCL P600, TCL P606 and Alcatel One Touch Snap 7025D are the same phones I just write about TCL P600 now. But it's working for both.
TCL P600 root package: http://www.4shared.com/zip/3HRtqraE/TCL_P600_Root.html
HowTo Root TCL P600:
- Extract the file
- Start the flash tool in extracted folder
- Make sure under options it is choosen “with battery”
- In FlashTool load scatter file contained in folder
- Click checkboxes of BOOTIMG and RECOVERY
- Doubleclick on BOOTIMG and refer to TCL-P600_130417__boot_patched_130508-162244.img
- Doubleclick on RECOVERY and refer to TCL-P600_130417__recovery_130508-162244.img
- Switch off mobile and unplug it from usb
- Click “download” in flash tool
- Plug in usb in phone
- If you get a green circle from flash tool saying OK you’re ready with root shell
- Unplug phone and reboot into CWM
- Start Droidtools and plugin usb to phone again
- Install superuser of your choice into phone.
- Ready – you have full root to phone.
If you experience any problems please check if you used the right drivers. Please check drivers attached in folders. Only use them.
Here is the JB gapps zip for flashing with CWM: http://goo.im/gapps/gapps-jb-20121011-signed.zip
Full instruction of getting a well working TCL P600:
1. First of all I updated the phone with TCL updater to the latest firmware.
2. I rooted it as I described before.
3. I deleted lots of China Apps and also under system/media bootup sounds and some - for me - other stuff not needed in order to get more space on system partition.
4. I installed GAPPS through CWM. I did it with this one: http://goo.im/gapps/gapps-jb-20121011-signed.zip
After rebooting I got crash of google search. I ignored it and added my google account. After opening playstore then I got update for google search. After updating there is no crashing anymore.
All other gapps are working quite well. I tested GPS for the TCL P600 and was really suprised it works quite fast and accurate.
The only thing: There is no A-GPS setting. Let's say: There is no GPS setting at all. You can only switch GPS on and off. Settings are not included. Maybe this will be unlocked with a modded rom.
I'm now testing all functions in detail but up to now it works really great.
Hope you got it also up to this point. After all steps this phone is really perfect.
------------------
If you brick your phone you have a brick Not my fault. I don't take responsibility of that my instruction will work for you. It worked for me. So now it's up to you.
I tried what you say but no thing happened .
I have alcatel one touch snap
Where can i buy
Mr.Mahmoud.Pro said:
I tried what you say but no thing happened .
I have alcatel one touch snap
Click to expand...
Click to collapse
Hi Mahmoud,
I want to know where you bought the mobile.. i was searching a lot over the internet and local stores to buy "alcatel one touch snap 7025D" mobile but i couldn't find it anywhere in my area (Andhra pradesh, India.) can you please tell a place or online website where i can find the mobile?
internal memory
hey i'm want to know if the root is swap bet. internal & external memory
that for games over 3 Gega
Custom Recovery
Hey i want to know if this recovery can be ported to my phone the alcatel one touch fierce it is the same as th one touch snap/7025d just without the 8mp camera and splash water proofing everything else is the same i had tried the aoutomatic port for CRR recovery but when it flashed the recovery i got a security error on my alcatel that says "error 101 unaouthorized software installed "it would not boot upand was bricked i bought the same phone again and i am wondering how y'all ported it to the fierces sister phone the one touch snap .thanks and have a great day
I don't know about porting possibility. I guess there is no way. This thread is not about changing the ROM but just how to root the TCL. There is no custom ROM out actually. So I don't see chances to port. Why should this be necessary? Is the stock ROM having problems?
Gesendet von meinem GT-N8000 mit Tapatalk
hello weimerd
my problem is that I have rooted the phone but when i delete Chinese applications to install gapps I deleted the app that handles the notification bar and other things, don't have notifications bar
the keyboard works, after loading another
google search don't work
Do I have to reload the firmware? Where do I can download the stock rom P606 TCL? to star again.
or
How I can recover this app? Can you pass me the app that has that control?
Can you say that apps I have to delete?
sorry by my english
weimerd said:
I don't know about porting possibility. I guess there is no way. This thread is not about changing the ROM but just how to root the TCL. There is no custom ROM out actually. So I don't see chances to port. Why should this be necessary? Is the stock ROM having problems?
Gesendet von meinem GT-N8000 mit Tapatalk
Click to expand...
Click to collapse
NO i just want to see if thos recovery could work in the case that ne2w rom development would occur and to create a backup for people who need it that is why i wanted to see if it could be ported
Solved the problems
Solved the problems.
I was able to upgrade wiht "TCL 2.7.4 Updater Setup.exe" the mobile software, I had the "TCL 2.7.9 Updater Setup.exe" version and this version told me it was updated. When I tested with 2.7.4 has recharged my sw and have gone back to the top, I rooted again with wiemerd instructions and now everything has worked correctly.
Thank you for your instructions and weimerd Sixpenny by spend "TCL S 2.7.4 Updater Setup.exe" saved me.
:laugh::laugh::laugh::laugh::good::good::good::good::good:
Hi all.
Is possible to port or create any custom rom for this device?
Thanks
Hi,
i have Snap 7025X, can this root steps bee used for that version too? Looks like OS is same, i have SIM management even i have 1 sim card.
root ^^^^^
Yeah this root will work if not try kingo root its great plus its one click just t urn on debugging. And make sure that your pc recognizes the phone also try motochopper
angort14 said:
Yeah this root will work if not try kingo root its great plus its one click just t urn on debugging. And make sure that your pc recognizes the phone also try motochopper
Click to expand...
Click to collapse
Thank you, i will try. I must install some other version of OS, official is fully bugged. After i used ROMs from xda for last 2 years, on my old phone, i forgot how bugged is official android.
There are so much crashes with official version, corupted SD card and so on...
please help me. after reflashing of my rom with flash tool. i have lost my imei and i have not done backup of my efs. my alcatel ot 7025d can't recognize any sim. i need efs backup or way to solve of my problem. i live in ivory coast there are not alcatel sav in this country.
I used kingo for root. Its really one click root tool. If your phone is rooted, you can restore to default. You can try to restore it with that tool.
Anyone know where to download Custom Boot Loader and Newer version of OS?
I have huge problem with this phone. There is all the time problem with memory card. I am using kingston class 10, 16gb memory but from time to time, after i take some picture or use default gallery, i get message that my memory card is corrupted. I need to restart phone and everything is ok, but sometimes it require even 3-5-7 restarts and its really anoying. Cant take pictures, use ringtone from memory cartd etc.
I tried with official updater but still use 4.2.1 version. Anyone have any newer custom rom?
Sorry for off topic but i am sure that this problems can be solved with some newer OS.
Pavankumar1889 said:
Hi Mahmoud,
I want to know where you bought the mobile.. i was searching a lot over the internet and local stores to buy "alcatel one touch snap 7025D" mobile but i couldn't find it anywhere in my area (Andhra pradesh, India.) can you please tell a place or online website where i can find the mobile?
Click to expand...
Click to collapse
You have a credit card to buy online ????
EmptySD said:
I used kingo for root. Its really one click root tool. If your phone is rooted, you can restore to default. You can try to restore it with that tool.
Anyone know where to download Custom Boot Loader and Newer version of OS?
I have huge problem with this phone. There is all the time problem with memory card. I am using kingston class 10, 16gb memory but from time to time, after i take some picture or use default gallery, i get message that my memory card is corrupted. I need to restart phone and everything is ok, but sometimes it require even 3-5-7 restarts and its really anoying. Cant take pictures, use ringtone from memory cartd etc.
I tried with official updater but still use 4.2.1 version. Anyone have any newer custom rom?
Sorry for off topic but i am sure that this problems can be solved with some newer OS.
Click to expand...
Click to collapse
I have the same problem, did you get any solution?
Regards
jobenja5 said:
I have the same problem, did you get any solution?
Regards
Click to expand...
Click to collapse
I mentored few problems, i dont know what do you mean.
EmptySD said:
I mentored few problems, i dont know what do you mean.
Click to expand...
Click to collapse
Have you solved the problem with the SD error?
jobenja5 said:
Have you solved the problem with the SD error?
Click to expand...
Click to collapse
Yes, buy new card I tried million things, formatted card using computer, phone, different phone etc. At the end, i bought new card and there is no problems at all. I give my card to my gf and she is using card without problem for last half year.
Related
Hey,
I recently bought this phone Huawei U8500, and I had a long search on the net where can I get a working recovery, finally I found a modified clockworkmod recovery.
It seems that this phone is highly unpopular.
I just wanted to share my finding.
Here you can download this modified version: Download
Steps to install recovery:
1. Download the clockworkmod
2. Unrar it somewhere on your computer
3. Turn off your phone
4. Press & Hold volume down key + call end (red) key and then press power key.
5. Launch the .bat file on your computer + connect your phone via USB
6. When it's finished, take out the battery and wait 5 seconds before putting it back in
7. Then you can access the recovery by holding volume up key + call(green) key
---------------------------------------------------------------------------------------
One thing I can recommend If your phones android build version doesn't end with "712", I suggest you to update it to the beta release, you'll have more functional dual-touch.
Here is the beta froyo update: Download
To install it:
1. Unrar it to your computer, and find a folder named "dload" with the biggest size.
2. Copy that "dload" filder to root of your SD card
3. turn off phone
4. Hold volume up key + end call (red) key and the press power key. Wait for it to load, it will say something like "Updating system" Wait for it to finish, if it says fail, just try again
5. After it says "Update complete" or "Update successful" just restart your phone and you'll have the new beta firmware.
--------------------------------------------------------------------------------------
In the Russian site I found some unofficial ROM's too.
I haven't tried them yes but if someone is willing here you can download them:
Firmware 2.2 29.01.2011 by Pavlo78
u8500_mao_rls7b2
u8500_mao_rls7++by_march_2
u8500_mao_rls8_by_march
u8500_mao_rls8_by_march
To install one of these ROM's do the following:
1. Copy the ZIP file on root of your SD card, the ZIP file, not RAR.
2. Boot up your phone in recovery mode (by holding volume up key + call(green) key)
3. With your optical trackpad select "Install zip from sd card"
4. From the list choose your ZIP file
5. And then just wait till the installation is complete and then just restart the phone!
------------------------------------------------------------------------------------------
I highly recommend you to back up the original firmware before installing new ROM's
You can do that in recovery mode, just click on nandroid and follow the on screen instructions it will backup your current firmware + your currently installed apps.
I'm not responsible for bricking your phone, if something doesn't go well. By doing the things I wrote, you may void your phones warranty.
Don't forget to thank me
Kind regards
xcoder_123
Bro, may i have to wipe all data via recovery like slash,cache and dalvik cache before i install froyo beta?
This is really helpful...a lot of Bangladeshis will be needing this. Telenor just launched this phone here.
I am using Huawei U8500 (Local branded as GrameenPhone Crystal). I have backed up my current ROM using ROM Manager. Can anyone confirm that the back-up ROM contains all the information including the Customized Branding???
Grameenphone Crystal Firmware U8500
In case You messed up
U8500 V100R001BGDC128B277 (Bengal GP)
Code:
//huaweidevice.com/worldwide/downloadCenter.do?method=downloadFile&flay=software&fileName=38766&attachmentName=U8500V100R001BGDC128B277.zip
monirr said:
In case You messed up
U8500 V100R001BGDC128B277 (Bengal GP)
Code:
//huaweidevice.com/worldwide/downloadCenter.do?method=downloadFile&flay=software&fileName=38766&attachmentName=U8500V100R001BGDC128B277.zip
Click to expand...
Click to collapse
Hi Monirr,
Can u confirm whether the link u provided is for only software upgrade or I can use it as a complete ROM backup (So that I can use it later in case of any failure to Upgrade the OS)
SAJUSIGMA said:
Hi Monirr,
Can u confirm whether the link u provided is for only software upgrade or I can use it as a complete ROM backup (So that I can use it later in case of any failure to Upgrade the OS)
Click to expand...
Click to collapse
Yah This one is the complete stock rom. I checked and found gps preloaded rom and this one is identical.
So no worry about Warranty. just load it when you need to go to gps Customer care.
monirr said:
In case You messed up
U8500 V100R001BGDC128B277 (Bengal GP)
Code:
//huaweidevice.com/worldwide/downloadCenter.do?method=downloadFile&flay=software&fileName=38766&attachmentName=U8500V100R001BGDC128B277.zip
Click to expand...
Click to collapse
10x a lot, monirr, I waz searchin this stock rom ... & do u kno if itz upgradeable 2 Android 2.3.4 or any1 upgraded?
hey im thinking bout buying this phone as i live in bangladesh... can anyone confirm me about the froyo upgrade does it work???
I did download the beta firmware.
And updated the phone's firmware a few minutes ago.
I have the dual touch now, yay (and a little better keyboard).
Many thanks from a Droid noob.
This should be enough for all your stock rom needs.
http://wiki.modaco.com/index.php/Huawei_Firmware_U8500
BTW: If you install the clockwordmod, you will lose the GP stock bootup screen (not the boot animation). So if you are going to claim warranty make sure you flash the GP firmware before you go to the GP centre.
Someone was asking how this phone is...the only issue I have is knowing that I'll never have flash on this thanks to the arm6 processor.
monirr said:
In case You messed up
U8500 V100R001BGDC128B277 (Bengal GP)
Code:
//huaweidevice.com/worldwide/downloadCenter.do?method=downloadFile&flay=software&fileName=38766&attachmentName=U8500V100R001BGDC128B277.zip
Click to expand...
Click to collapse
To upgrade my gp crystal to 2.2 , which one is best rom to download?
or can this model is upgradable to 2.3?pl help.
taavu said:
I did download the beta firmware.
And updated the phone's firmware a few minutes ago.
I have the dual touch now, yay (and a little better keyboard).
Many thanks from a Droid noob.
Click to expand...
Click to collapse
which version you download in which model
taavu said:
I did download the beta firmware.
And updated the phone's firmware a few minutes ago.
I have the dual touch now, yay (and a little better keyboard).
Many thanks from a Droid noob.
Click to expand...
Click to collapse
which beta firmware you download in which model?
ROBINGAZI said:
This should be enough for all your stock rom needs.
http://wiki.modaco.com/index.php/Huawei_Firmware_U8500
BTW: If you install the clockwordmod, you will lose the GP stock bootup screen (not the boot animation). So if you are going to claim warranty make sure you flash the GP firmware before you go to the GP centre.
Someone was asking how this phone is...the only issue I have is knowing that I'll never have flash on this thanks to the arm6 processor.
Click to expand...
Click to collapse
in gp crystal, through rom manager, if i install clockwordmod then a phone list appear , but there no option of this model(u8500). How can i install?
mostafiztuhin said:
in gp crystal, through rom manager, if i install clockwordmod then a phone list appear , but there no option of this model(u8500). How can i install?
Click to expand...
Click to collapse
see the first post of this thread.
mostafiztuhin said:
To upgrade my gp crystal to 2.2 , which one is best rom to download?
or can this model is upgradable to 2.3?pl help.
Click to expand...
Click to collapse
There is a thread in the port section of the Cyanogenmod forum. It started with a lame question but later a lot was discussed about gingerbread 2.3.4. There is a Chinese developer (Slax) who has been working on the rom. However, this rom does have a few issues.
I don't know Chinese and google translate is incomprehensible. You should be able to find all the links needed in the cyanogenmod forum.
here is the link.
http://forum.cyanogenmod.com/topic/21467-huawei-u8500/
for froyo try trial and error with all the official roms. if you don't like one change it. eventually you will find one that meets your need.
monirr said:
In case You messed up
U8500 V100R001BGDC128B277 (Bengal GP)
Code:
//huaweidevice.com/worldwide/downloadCenter.do?method=downloadFile&flay=software&fileName=38766&attachmentName=U8500V100R001BGDC128B277.zip
Click to expand...
Click to collapse
Dear bro,
This link doesn't work. Pls, help me with a active link.
Thanks in advance.
Hello XCoder, and all!
I try this steps, but i stopped after 4th step...
I get a boot logo, and the XP can't recognize droid, unknown device.
than the .bat file just wait for connection.
i try lot of drivers (original U8500, Original Android, and the SDK's driver too) and still "unknown Andoid device"
If i get out battery, take back, and standard Power On, the XP recognize the "Android Composite ADB" device, and bind the SD card, and CDROM image, and works perfectly.
but i can't upgrade in Standard Mode
can anyone have an idea, how i can access the Droid under Recovery Mode?
and all links of huaweidevice.com are unavailable
have new link?
regards, QSoft
qsoft73 said:
Hello XCoder, and all!
I try this steps, but i stopped after 4th step...
I get a boot logo, and the XP can't recognize droid, unknown device.
than the .bat file just wait for connection.
i try lot of drivers (original U8500, Original Android, and the SDK's driver too) and still "unknown Andoid device"
If i get out battery, take back, and standard Power On, the XP recognize the "Android Composite ADB" device, and bind the SD card, and CDROM image, and works perfectly.
but i can't upgrade in Standard Mode
can anyone have an idea, how i can access the Droid under Recovery Mode?
and all links of huaweidevice.com are unavailable
have new link?
regards, QSoft
Click to expand...
Click to collapse
I have same problem here
Hi I have a ed88 mtk6575 512mb ram and 4GB hd this is a tablet phone , it has 2 sim cards and I'd like to root it, I'm totally newbie, so please include step by step for this device.
It has android ics 4.0.4 build number ALPS.ICS.MP.V2.2 So if someone knows how to root one of this, please let me know.
Also is there is a way to make a custom rom for Jellybean that will be used on this phone? and what programs are available for it, please advice.
Thanks,
Gus
gusduenas said:
Hi I have a ed88 mtk6575 512mb ram and 4GB hd this is a tablet phone , it has 2 sim cards and I'd like to root it, I'm totally newbie, so please include step by step for this device.
It has android ics 4.0.4 build number ALPS.ICS.MP.V2.2 So if someone knows how to root one of this, please let me know.
Also is there is a way to make a custom rom for Jellybean that will be used on this phone? and what programs are available for it, please advice.
Thanks,
Gus
Click to expand...
Click to collapse
hi,
you can try 'Tpsparky root' in your tablet. it is for any Mt6575 devices.
But FIRST BACKUP YOUR ROM - NANDROID BACKUP. If anything go wrong, you can reflash the Rom, Also I am not responsible for any failure (Every developer or mate tells like these)
you can try here - the first file - xfab rooting.zip
http://forum.xda-developers.com/showthread.php?p=32932373
first install mtk6575 driver in pc and then click bat file.
Sparky root didn't work with mine, I have to use the root root with restore by binary and it was rooted...thanks anyway. Do you know where can I find a custom rom (paranoid maybe) able to work with the mtk6575 chipset or now that my phone is rooted, how can I retrieve the binary blobs, vendor libs, device kernel and device tree?
Please help.
gusduenas said:
Sparky root didn't work with mine, I have to use the root root with restore by binary and it was rooted...thanks anyway. Do you know where can I find a custom rom (paranoid maybe) able to work with the mtk6575 chipset or now that my phone is rooted, how can I retrieve the binary blobs, vendor libs, device kernel and device tree?
Click to expand...
Click to collapse
I have 10 same devices with this build : ALPS.ICS.MP.V2.26
7 inch with 2 sim dual camera with back flash.mtk 6575 2G.
>>>>>>All of them have problem charging when the are off tablet hangs and need to reset. but if turned on are OK. So I need to reset them during off powered charge.
I think charging animation in off mode has a bug!
What can I do? can I change the low level animation?
or I saw some other tablets automaticly turning on when I plug the charger.so is it possible to make the tablet automaticly turned on when plugged to charger???
The brand looks same as ALPS and it works as a 9220 mtk 6575 phone but it is 7 inch tablet.
hello, sorry for the late reply, I can change the gross icons and images using phothosop and using the update logo and bootanimation.zip. it is easy, you just have to upload to an external sd card the following files:
boot_logo
startup.bmp
battery.bmp
low_battery.bmp
use the update logo from external sd from recovery menu.
My two cents.
Gus
Any one know if it is possible to get a new screen for the ED88?
Please help me i'm new to this forum as well as new to rooting and custom rom for mobiles.
I don't know to use forums but anyone can help me please...
I installed CM11 Rom and Gapps and my phone sony xperia m booted correctly but how to enable sim card.
its said at begining sometime about sim card and when i went to enable data it says insert sim card.
now what top do please tell me>....
Do i need to install builds , any terminal commands or anything pls suggest me with text , videos or photos.
Very Urgent plssssssssssssssssss.
email at - [email protected]
or at
[email protected]
What CM11 build are you using? The ones from FXP or the official?
I'm currently experiencing a similar problem. I've installed ZnxtEvolution, and it lags a LOT. I tried installing 6 other ROMs, including CM11 (official). All of them worked, but didn't read my SIM. Please help; I'm sick of this ROM.
PS: I'm guessing there's a kind of zip file to flash, or something..? idk :\
niks2014 said:
Please help me i'm new to this forum as well as new to rooting and custom rom for mobiles.
I don't know to use forums but anyone can help me please...
I installed CM11 Rom and Gapps and my phone sony xperia m booted correctly but how to enable sim card.
its said at begining sometime about sim card and when i went to enable data it says insert sim card.
now what top do please tell me>....
Do i need to install builds , any terminal commands or anything pls suggest me with text , videos or photos.
Very Urgent plssssssssssssssssss.
email at - [email protected]
or at
[email protected]
Click to expand...
Click to collapse
Hey there,
I think I understood what you have told and I have few questions to ask,
First were you on stock 4.3 before flashing?
Second did u wipe cache,data,dalvik and format /system before flashing?
After u installed did u check the Sim subscription it asks after 1st bootup .if not go to settings and do it.
See I am no expert , just a beginner like you are.so hope this helps. Thanks
I don't know how to enable sim from settings.
elmkzgirxp said:
What CM11 build are you using? The ones from FXP or the official?
Click to expand...
Click to collapse
I flashed cm11 after 4,3 xperia m auto upgrade only.
I don't know which cm11 build i flashed it, but at startup of my mobile i was at wifi setting that time some sim message flash but i went away as i touched the wifi screen option by mistake.
can you or anyone else provide me with working sim cm11 build over here or in pm
and also the way to configure sim from settings if not at startup.
Actually after this my mobile undergone a shot circuit itself so needs a repair so can any one estimate what is the cost of repair of such issue, my estimate was 800rs/ 80EUROS as per some website.
niks2014 said:
I flashed cm11 after 4,3 xperia m auto upgrade only.
I don't know which cm11 build i flashed it, but at startup of my mobile i was at wifi setting that time some sim message flash but i went away as i touched the wifi screen option by mistake.
can you or anyone else provide me with working sim cm11 build over here or in pm
and also the way to configure sim from settings if not at startup.
Actually after this my mobile undergone a shot circuit itself so needs a repair so can any one estimate what is the cost of repair of such issue, my estimate was 800rs/ 80EUROS as per some website.
Click to expand...
Click to collapse
I don't really know how much repairs cost, but after the repair, I suggest you do this:
GOING BACK TO STOCK ROM
1. Backup everything you need (messages, contacts).
2. Download a 15.4.A.1.9 firmware (FTF) in here or here, your choice.
3. Download and install Flashtool from here.
4. Place the downloaded firmware to the C:\Flashtool\firmware, or wherever you put your Flashtool installation, as long as it is in "firmware" folder. (Make sure the file you downloaded is in .ftf (file extension), if not and it is in .zip or .rar, then extract it first.)
5. Open Flashtool.
6. Power off your device. (Prepare your USB cord.)
7. Connect your USB cord to your PC FIRST, then hold the volume - down while connecting it to the other end of the cord. (The phone's LED will light up into green (it means it is in flash mode).)
8. Click the lightning button and select Flashmode.
9. Pick the firmware you downloaded earlier, then click Flash. (MAKE SURE there is no option of "TA" in the list on the right side. If you ever find one, uncheck it.)
10. After flashing, remove your phone from your PC, then power it on. (The first boot normally takes longer.)
11. Set-up everything after the boot.
FLASHING CM11
1. Download a custom recovery and flash it. (I'll assume you already know this one.)
2. Download the latest official nightly build from here.
3. After the download, put it in your preferred storage in your phone.
4. Boot into the custom recovery and wipe /data and /cache.
5. Flash the downloaded CM11 ROM.
6. Reboot into system. (Again, the first boot takes longer.)
That's pretty much it. I hope it helps!
i got this too after flashing fxp343, never happen before now back to stock 4.3 again :/
I rooted my note 4 and noticed it was really laggy so I planned to flash a new rom. Went into Twrp and did a full wipe and when I went to load my new rom onto the mounted phone (in Twrp) I got the error message in windows saying Cannot copy file "Its file size is larger than the device limit". I did some research and this seems to happen when a file is larger than 4 GB but the file I am trying to load isn't. I have 3 potential roms all around 1.2 GB and all give the same message when trying to put them on my SD card or the internal storage. Anyone know a fix for this. I tried going to the backup I made before trying the new roms and I get a boot loop so my 2 day old phone is partially bricked at the moment. I can still get into TWRP and I still can use Odin but I can't copy and past roms onto the phone. Any help would be appreciated thanks in advance.
This is still an issue but I found a workaround, a rather obvious one that in my panic I didn't think of. I just used my SD card reader and put the roms I wanted on my SD card then put it back in my phone and installed through twrp. This worked well but now the google play store isn't working for some reason even though I am using a mostly stock rom. I'll look at that roms thread for answers
tonygotskilz said:
This is still an issue but I found a workaround, a rather obvious one that in my panic I didn't think of. I just used my SD card reader and put the roms I wanted on my SD card then put it back in my phone and installed through twrp. This worked well but now the google play store isn't working for some reason even though I am using a mostly stock rom. I'll look at that roms thread for answers
Click to expand...
Click to collapse
Extract the file SDfix.apk from this zip,install and run it. It may solve the problem. This problem happens to me everytime I flash a stock rom and this cures it.
Same Problem Here
jhill110 said:
Extract the file SDfix.apk from this zip,install and run it. It may solve the problem. This problem happens to me everytime I flash a stock rom and this cures it.
Click to expand...
Click to collapse
How do I install SDFix.akp? All I have working is TWRP 2.8. Goal is to install HD Rev 82. Phone has no OS on it right now.
Download and install foldermount from the play store. Then run it and reboot. Should fix your issue.
teebright said:
How do I install SDFix.akp? All I have working is TWRP 2.8. Goal is to install HD Rev 82. Phone has no OS on it right now.
Click to expand...
Click to collapse
Extract it... Transfer to your phone... Tap it. You will get a "install" prompt... Install... Find it in the app drawer... Run it... Look carefully for the check box, it's hard to see... Viola... Your good to go... No need to go to the play store...
Thanks, but...
jhill110 said:
Extract it... Transfer to your phone... Tap it. You will get a "install" prompt... Install... Find it in the app drawer... Run it... Look carefully for the check box, it's hard to see... Viola... Your good to go... No need to go to the play store...
Click to expand...
Click to collapse
My phone is soft-bricked right now lol. I ended up copying the files via ADB with this helpful video:
https://www.youtube.com/watch?v=NaK5OxUeDKM
This line from cmd line w/ Minimal ADB and Fastboot did the trick:
adb push yourRomNameHere.zip /sdcard/.
Hello all.
I've recently bought this LG-H735 and it runs Marshmallow. Only now I've discovered the issues with its internal memory so I'd like to root in order to use my SD card as default space to install apps.
Problem is, after a bit of search I used Kingroot and it seem to do the trick... until I restarted the phone and it soft-bricked into the usual bootloop. Can access the download mode but it gets stuck at 0% for hours.
Next step would be to flash but I've been searching everywhere on the web and I can't find the ROM. All links are either down, lost or just plain broken. I'd need the PRT version if I'm geting this right, thats what my phone box shows at least.
I was wondering if anyone could point me in the right way.
Any tips would be apreciated, still new to all this. Thanks in advance.
Also... a little question update if I may. Anyone recomend a nice custom ROM for this phone? Unfortunatly Cyanogen is not compatible it seems.
Thanks again.
rk56 said:
Hello all.
I've recently bought this LG-H735 and it runs Marshmallow. Only now I've discovered the issues with its internal memory so I'd like to root in order to use my SD card as default space to install apps.
Problem is, after a bit of search I used Kingroot and it seem to do the trick... until I restarted the phone and it soft-bricked into the usual bootloop. Can access the download mode but it gets stuck at 0% for hours.
Next step would be to flash but I've been searching everywhere on the web and I can't find the ROM. All links are either down, lost or just plain broken. I'd need the PRT version if I'm geting this right, thats what my phone box shows at least.
I was wondering if anyone could point me in the right way.
Any tips would be apreciated, still new to all this. Thanks in advance.
Click to expand...
Click to collapse
First off all ****! Look at this : http://forum.xda-developers.com/general/general/kingo-root-steals-imei-t3268525
and for the custom rom there is a just stock rom and how to root.
HOW TO ROOT /W out KINGOROOT (because steals imei) : http://forum.xda-developers.com/g4/general/lg-g4s-world-root-lg-devices-t3231759
HOW TO UNBRICK: : http://guidebelajar.blogspot.com.tr/2015/11/guide-to-flash-bricked-bootloop-lg-g4-beat-g4s.html
if i install twrp no-troot h735 then flash magisk to phone it will be rooted?