Develop Bugs

ATT TILT 2 owned since released stuck in Boot Screen

I have a Stock TILT 2 (TP 2) never flashed running basic programs Mobile Shell never had any issues with it, haven't installed new software in a few weeks , but I soft resetted it this morning and it keeps getting stuck in the boot screen. when first turned on it will run through boot screen then load screen for a millisecond then back to boot screen and never advances again , I've tried battery out sim card out Sd card out everything, even tried hard reset , but wont allow me to hard reset with front buttons and power, is there another way to hard reset , is it possible my phone just bricked for no reason ? thanks for any help ?

have you tried to do a hard reset via the pc? the original rom is on the htc website so you can try useing the exe file there. there is also an updated rom you can try to flash there. hope that helps

You might try sending it to the bootloader screen and reflashing. I don't know if it will work, but I thought it might be worth the effort.
I did notice that HTC removed the original shipped ROM for the Tilt2. I'm sure it is floating around here somewhere. If not, I have it and can send it to you when I get home.

Thanks I have original rom and just released wont work.

dod you see anythign on teh screen? if you do, then hard reset may fix it.
Power off your phone (or take teh battery out). Then press and hold teh call and hang up button while press teh power button. it will enter the hard reset mode. (remember hard reset will erase all the info on the phone and rever tot the stock setting).

jcterry said:
I did notice that HTC removed the original shipped ROM for the Tilt2.
Click to expand...
Click to collapse
wow, thank god i dl'd it when i dl'd the updated rom... and they still have the image of the old rom right beside it... lol
as for op, you can try to enter the bootloader with the following steps
Remove the back cover from the phone.
Hold the Volume Down button.
Use the stylus to press the reset hole.
Or if the device was powered off, press the power button whilst holding down the Volume Down button.
and try to flash from there
hope that helps again

[Q] Phone possibly hard bricked, need help

So I'm running CM 10.2 android version 4.3 and I started to notice that when I pressed the power button, it brought up the reboot menu instead putting my screen to sleep so I downloaded the newest nightly and figured it was probably just a bug and went to flash the latest nightly. Upon reboot, my phone got in an infinite bootloop so I pulled the battery, let it sit for a minute and then held the power, volume up and menu button to enter recovery. I got the blue words in corner that you will normally see when booting into recovery, then saw the S3 screen that you'll see right before entering recovery, however, my phone started rebooting again constantly vibrating etc. So then I decided to try and get into download and flash back to stock with Odin. So I entered download mode, pressed volume up on the confirm screen and then it entered download mode and then immediately rebooted and wouldn't stop. Is my phone bricked? I'm wondering if the power button is broken since when in download mode, it reboots which normally occurs when you hold the power button in download mode. Sorry for the long description but just wanted you guys to know what I've done so far and am experiencing. Any help is appreciated. I've been rooting phones from all manufacturers for years now and I'm out of ideas at this point. Thanks!

Definition of a bricked phone: A completely unresponsive device which doesn't turn on at all. Doesn't vibrate upon start up and doesn't have any signs of life.
You most likely have a jammed power button as that has been the issue with the GS3. Not a brick.

Clearly not bricked as the first reply explained. And for the love of god, please use some white space (paragraphs) next time.
If you think that a button is jammed, see if you can physically unjam it without causing damage. If you believe that the flash may be messed up, the mskip's Samsung Toolkit may be able to reflash a known good ROM even with a stuck button. And look into some of the button remapping apps like the aptly titled Fix Broken Power Button app.
Good luck.

No hardware buttons work!!

Hi
Could some one tell me why i cant get in recovery or factory mode with hardware buttons, i am on stock 10d with twrp recovery installed and rooted wirh super su through twrp. I installed twrp through adb with normal command and device works just fine through reboot apps from os, boots in recovery,fastboot etc just fine,same through adb commands.
But there's no hardware combo or anyrhing working when trying to enter recovery or factory reset working at all?
Tryied every combo i could find saying how to from internet.
It just boot up in os as usual.
And phone dosen't reset while holding power button for 10s + either
It's a bit scary because bootloop is going to come eventually for sure and then there's no rescuing avalible
Could someone plz tell me whats going on?
Im new to g4 so, some help would be nice.
Thanks in advace

It's a bit tricky, to be honest.
• Power off your phone
• Hold "Volume-Down" and keep your "Power-Button" pressed. So you should keep both pressed, until the 1st LG logo appears
• Now just leave the "Power-Button" for ~1 second whilst kept the "Volume-Down" button still pressed, press now the "Power-Button" again and keep holding it
You're now forced to deal with the standard-ui from LG. Go to "Yes" and again "Yes". TWRP now boots and you should be fine .
Edit: Just my tiny story... I watched several videos and also had a nasty bootloop. I was afraid, I now bricked my phone. But a nice user showed me this way and this was the only way, I got my phone recovered.

Touch screen not responsive after reboot

So my PIxel XL locked up (of course) and I had to soft reset it to come back. This time, however, the touch screen is 100% non responsive. Fingerprint is fine, other buttons are fine, but no touch screen. It happened to be in the middle of Play updates when it locked up - that may be related to the problem.
Anyway, I was going to try and reboot into safe mode,but I cant seem to get it into safe mode without a way to actually turn it off other than another reset, which just boots it again. I got it into recovery mode once but all I could do was reboot.
I;m reasonably savvy with the various tools, but since I can't unlock it I'm not sure where to go next.
And of course I absolutely need a working phone for work (and everything else in the world....) :crying:
Help?

mikeprachar said:
So my PIxel XL locked up (of course) and I had to soft reset it to come back. This time, however, the touch screen is 100% non responsive. Fingerprint is fine, other buttons are fine, but no touch screen. It happened to be in the middle of Play updates when it locked up - that may be related to the problem.
Anyway, I was going to try and reboot into safe mode,but I cant seem to get it into safe mode without a way to actually turn it off other than another reset, which just boots it again. I got it into recovery mode once but all I could do was reboot.
I;m reasonably savvy with the various tools, but since I can't unlock it I'm not sure where to go next.
And of course I absolutely need a working phone for work (and everything else in the world....) :crying:
Help?
Click to expand...
Click to collapse
Factory reset.

toknitup420 said:
Factory reset.
Click to expand...
Click to collapse
It sounds like his phone won't power off though. How do you get to the bootloader menu when holding down the power button automatically does a soft reboot of the phone? He might need to let the battery drain so the phone actually shuts off before he can get to the bootloader menu to do a factory reset.

Literally ALL android devices can be forced to shutdown or to restart in a similar fashion to pc's. literally just hold the power button.
In the pixels case, holding the power button for 15 consecutive seconds will force the phone to reboot.
press and hold power, start counting to 15, as soon as your about to hit 15 seconds go ahead and mash down the volume down button with it. this should get you into fastboot where you can access recovery or fastboot flash a image.
jhs39 said:
It sounds like his phone won't power off though. How do you get to the bootloader menu when holding down the power button automatically does a soft reboot of the phone? He might need to let the battery drain so the phone actually shuts off before he can get to the bootloader menu to do a factory reset.
Click to expand...
Click to collapse
This causes a full reboot on my current and previous pixel, not a soft reboot, ive used this method to save my arse many times. i hold it down, and it restarts all the way to the unlocked bootloader screen
I had a situation where as soon as the phone booted i would get all sorts of errors that prevented me from using the phone or even accessing the power menu, and this is the savior.
possibly try holding it more than 15 seconds? maybe let it cycle twice before attempting to enter fastbppt

NOOB: hard bricked op3, volume up button hasn't been working

First off, I did do a search, but as far as I can tell no one has had this problem so far.
This is all after modding using a tool kit: (i can't include the url but it is the toolkit by neisor on the oneplus forums)
tldr: phone stuck in bootloop, computer wont recognize the phone, maybe because it keeps shutting off and then booting to the 1+ logo, then shutting off again, would drivers help? what can I do about the volume up button?
So for a while my volume up button hasn't been working, and the mega unbrick post shows that I need to hold the volume up button for at least 25 seconds and while holding, plug my phone in. I have also seen some posts that say the volume up button could be a software issue, and the button itself could be working, and it is just not registering, as well as someone saying that you could take the back off and manually press the button, instead of using the bar on the outside of the phone (would this work?). I have gotten the button to work in the past by pressing the volume up button to the side instead of straight in, but I haven't been able to get it to work since my phone got bricked.
Another issue: my phone is stuck in a boot loop, I can't access fastboot, and I'm unsure of recovery because my volume up button is not working. would it be worth it to deal with the constant vibrating to try to get it to recovery?
I have been able to shut the phone off by holding the power button for something like a minute and a half, though.
This is my first post, and if I have broken any rules I am very sorry, but I need help and am tired of not having a phone.
Thank you everyone,
Mark
Edit: this is what I did to root the phone:
1. download the toolkit
2. unlock bootloader (when fastbooting the phone said unlocked at the bottom, and a message about not being secure showed every time I rebooted the phone)
3. flashed twrp (no issues, still booted, recovery went to twrp. for some reason I had to flash multiple times as every now and then recovery would revert to stock op, although I did make a backup through twrp)
4. send supersu zip file to phone, install using twrp (phone would not boot, op logo stayed on phone for 2 hrs + until I rebooted to fastboot and tried to reinstall the backup I made, still nothing)
5. Try magisk (still stuck on op logo)
6. try to go back to stock, accidentally lock bootloader (now the phone is stuck in bootloop, don't know what to do from here as I cant get to fastboot and am unsure of recovery's accessibility.)

If you are sure you have a broken volume button, you need to replace it first in order to get the phone fix.
Correction:
Fastboot/bootloader = Power+Vol Up
Recovery = Power+Vol Down

This happened to me except I didn't even get anything appear on the screen -- the phone just periodically vibrated with the screen not even light up. I tried the reset toolkit which is meant to flash your phone back to normal using Qualcomm drivers or something, but that didn't work either. Eventually I had to send it to OnePlus who fixed it for free in under a week! They said the motherboard had failed.
I hope you get this fixed!

Thanks
150208 said:
If you are sure you have a broken volume button, you need to replace it first in order to get the phone fix.
Correction:
Fastboot/bootloader = Power+Vol Up
Recovery = Power+Vol Down
Click to expand...
Click to collapse
thanks for the correction, I will keep trying the volume buttons, if it doesn't work by the end of today I will search for a new volume button.
Thanks again,
mark

Ouch
badabdba said:
This happened to me except I didn't even get anything appear on the screen -- the phone just periodically vibrated with the screen not even light up. I tried the reset toolkit which is meant to flash your phone back to normal using Qualcomm drivers or something, but that didn't work either. Eventually I had to send it to OnePlus who fixed it for free in under a week! They said the motherboard had failed.
I hope you get this fixed!
Click to expand...
Click to collapse
Damn, that sucks, and besides being unfixable (doubt it), this is my biggest fear. I'm in the US and really don't want to have to ship my phone to china to have it fixed. If you are in the US as well do you know if there is a OnePlus branch I can send it to in the US?
Thank you,
Mark

MarkTheFur said:
Damn, that sucks, and besides being unfixable (doubt it), this is my biggest fear. I'm in the US and really don't want to have to ship my phone to china to have it fixed. If you are in the US as well do you know if there is a OnePlus branch I can send it to in the US?
Thank you,
Mark
Click to expand...
Click to collapse
There seems to be one in Texas. Anyway, contact OnePlus and they may try to solve it over the air.
Apart from that, did you install the Qualcom drivers properly? Even with your faulty power button, try to hold it down for 40+ seconds (for the phone to switch off) and then immediately hold down the volume up button for 10 seconds and then plug in the phone to the PC. I know I am merely repeating the instructions of Naman Bhalla in his Mega Unbrick Guide but it is crucial to do them correctly especially the installation of the drivers. Try these steps repeatedly because for some people, the phone gets recognised after repeated attempts. Or else replace the power button and then try these steps.
I had to use the Guide last month and successfully resurrected my dead phone.

MarkTheFur said:
... what can I do about the volume up button?
Click to expand...
Click to collapse
Can you boot into recovery by pressing power+volume down buttons?

Update: Got phone to show on computer as qualcomm under coms and ports
So last night I went ahead and held volume up for about 20 seconds, then plugged the phone in, keeping the volume up button pressed the entire time. my phone stopped bootlooping and showed up as a qualcom device! So I have downloaded the new driver the stock os, and am going to proceed to try to unbrick my phone.
Wish me luck,
Mark

Yes, I did, and its working so far
tnsmani said:
There seems to be one in Texas. Anyway, contact OnePlus and they may try to solve it over the air.
Apart from that, did you install the Qualcom drivers properly? Even with your faulty power button, try to hold it down for 40+ seconds (for the phone to switch off) and then immediately hold down the volume up button for 10 seconds and then plug in the phone to the PC. I know I am merely repeating the instructions of Naman Bhalla in his Mega Unbrick Guide but it is crucial to do them correctly especially the installation of the drivers. Try these steps repeatedly because for some people, the phone gets recognised after repeated attempts. Or else replace the power button and then try these steps.
I had to use the Guide last month and successfully resurrected my dead phone.
Click to expand...
Click to collapse
I still need to turn off the signed drivers features ( a huge bi*ch, I have to use another computer to contact microsoft or something to get my computer to load when I turn off safe boot or whatever its called), but once I do that I can install the driver and attempt to reinstall the stock os. Hopefully everything will go well.
Thank you,
Mark

Not as far as I know
rk2612 said:
Can you boot into recovery by pressing power+volume down buttons?
Click to expand...
Click to collapse
So far recovery has not been loading, just the bootloop, but I have gotten the phone to power off by pressing the power button for 40 seconds, and the volume up button plus plugging in does make the phone register as qualcom 9008 or something like that. Basically everything is going well so far, and the faulty vol button seems to have been a software bug, as it does work when plugging it in. I will try to get to fast boot, but it did not work last time.
Thank you,
Mark

MarkTheFur said:
So far recovery has not been loading, just the bootloop, but I have gotten the phone to power off by pressing the power button for 40 seconds, and the volume up button plus plugging in does make the phone register as qualcom 9008 or something like that. Basically everything is going well so far, and the faulty vol button seems to have been a software bug, as it does work when plugging it in. I will try to get to fast boot, but it did not work last time.
Thank you,
Mark
Click to expand...
Click to collapse
Glad to hear that there is some progress. Best of luck and keep us informed.