Hi
Could some one tell me why i cant get in recovery or factory mode with hardware buttons, i am on stock 10d with twrp recovery installed and rooted wirh super su through twrp. I installed twrp through adb with normal command and device works just fine through reboot apps from os, boots in recovery,fastboot etc just fine,same through adb commands.
But there's no hardware combo or anyrhing working when trying to enter recovery or factory reset working at all?
Tryied every combo i could find saying how to from internet.
It just boot up in os as usual.
And phone dosen't reset while holding power button for 10s + either
It's a bit scary because bootloop is going to come eventually for sure and then there's no rescuing avalible
Could someone plz tell me whats going on?
Im new to g4 so, some help would be nice.
Thanks in advace
It's a bit tricky, to be honest.
• Power off your phone
• Hold "Volume-Down" and keep your "Power-Button" pressed. So you should keep both pressed, until the 1st LG logo appears
• Now just leave the "Power-Button" for ~1 second whilst kept the "Volume-Down" button still pressed, press now the "Power-Button" again and keep holding it
You're now forced to deal with the standard-ui from LG. Go to "Yes" and again "Yes". TWRP now boots and you should be fine .
Edit: Just my tiny story... I watched several videos and also had a nasty bootloop. I was afraid, I now bricked my phone. But a nice user showed me this way and this was the only way, I got my phone recovered.
Related
I upgraded from 2.51.1 to 3.4.2-117, and the phone lags, seems to me that it is because of the google sync. Someone posted the very same problem and said that factory reset solved his problem.
My problem is that the phone does not do factory reset, in Privacy I press the erase button and nothing happens.
I tried to boot into recovery, but I can't get into it. The droid comes up but upon touching the lower right corner nothing happens.
When i try to boot with vol up and down same time, the phone boots into safe mode.
How shall I get into recovery so I could do a wipe? The phone is basically unuseable now because of the lags and freezes
Hey mate! Don't give up. When you see the droid in the center of the lcd just push vol+ and vol- at once. You'll get into recovery mode. )))
thx dude, i figured it out "accidentaly"
Everyone was writing on the net that the recovery boot is up and down the same time instead of the old method of power & volume -.
So, when I got to the droid, started to push every possible button in every possible variation and I got in.
since then I learned that the vol up and down is after power & vol -, not instead.
Hey guys,
Ok, this is a tough one for you. I'm actually not 100% convinced that my phone isn't hard bricked. But every where I look for, it says, it's only hard bricked if your phone wont turn on at all and that's just not true in my case. So here's the story:
My volume-up button is kind of screwed, I don't know, what happened to it, but one day, it just started being triggered randomly until it just didn't work at all anymore. It wasn't that big of a problem, since I was still able to change the volume by hitting the volume-down button once and changing the volume by the on screen slider. I was running SkyDragon GPE V5.5 for quite a while now.
But now I wanted to upgrade to Android 6.0, so I downloaded the firmware from here. Next I rebooted to bootloader switched to fastboot and used "sudo fastboot oem rebootRUU" and "sudo fastboot flash zip firmware.zip" twice. So far so good, everything went fine and I actually even am able to see the new Google splashscreen.
So now I want to flash this ROM. But, for some reason, the touchscreen doesn't work anymore, even though it's activated in the CWM Philz Touch GUI settings enabled. Alright, so I "wipe to install a new ROM" and navigate to the zip file to install it and it starts the aroma installer, which I can't control since the touchscreen doesn't work. So, I'm kind of frustrated by now, I flash TWRP, because, maybe here, the touchscreen works. I flash it and try to reboot into it. But it doesn't work, it just stays at the Google splashscreen, I can restart by holding down the power button but it will just go back to the Google splashscreen. After a couple of tries I actually get it to turn off, so I hold down power and volume down to get into the bootloader but it just goes back to the splashscreen.
I can't get to the bootloader, I don't have a ROM installed and I can't get into the recovery. Is there anything I can still do or is everything lost?
Which TWRP version ? You need to use 2.8.7.0
You can't get to bootloader because of the timing when pressing power & volume down button.
If you can turn it off, press and hold volume down button then press power button until it vibrates then release the power button.
I have the t-mobile LG G$ (H811) and can't use the hardware keys to reboot into recovery.
I have CM13 and TWRP installed (previously had CM12.1/TWRP with the same issue).
I can use software to reboot into recovery, but not the hardware method.
I have tried all the combinations I can find, basically consisting of:
-turning on and pressing the power + volume down or power + volume down + volume up
-releasing power for 1 second when the lg logo comes up
-pressing the power again
No matter what I try, the phone continues to boot as normal.
I can easily get into download mode though
Is there any way to reboot from download into recovery?
I had a problem with a bad CM flash that bootlooped (not the bad lg bootloop problem) - and my only way out was to re-flash stock and go from there - it was a time consuming pain. I am just trying to figure out some way of booting into TWRP recovery - I can't seem to get the recommended keypress sequence to work.
Any assistance would be greatly appreciated.
ew said:
I have the t-mobile LG G$ (H811) and can't use the hardware keys to reboot into recovery.
I have CM13 and TWRP installed (previously had CM12.1/TWRP with the same issue).
I can use software to reboot into recovery, but not the hardware method.
I have tried all the combinations I can find, basically consisting of:
-turning on and pressing the power + volume down or power + volume down + volume up
-releasing power for 1 second when the lg logo comes up
-pressing the power again
No matter what I try, the phone continues to boot as normal.
I can easily get into download mode though
Is there any way to reboot from download into recovery?
I had a problem with a bad CM flash that bootlooped (not the bad lg bootloop problem) - and my only way out was to re-flash stock and go from there - it was a time consuming pain. I am just trying to figure out some way of booting into TWRP recovery - I can't seem to get the recommended keypress sequence to work.
Any assistance would be greatly appreciated.
Click to expand...
Click to collapse
Real hard, but I finally got it to work. It is all a matter of timing. Power button needs to be released (and pressed) before the unlocked bootloader message comes on, but not too soon.
Even knowing that, I still only get it right 50% of the time.
ew said:
Real hard, but I finally got it to work. It is all a matter of timing. Power button needs to be released (and pressed) before the unlocked bootloader message comes on, but not too soon.
Even knowing that, I still only get it right 50% of the time.
Click to expand...
Click to collapse
I found this sequence to work best for me.
First hold volume down then press power down
When the logo shows up, release power and then press again.
First off, I did do a search, but as far as I can tell no one has had this problem so far.
This is all after modding using a tool kit: (i can't include the url but it is the toolkit by neisor on the oneplus forums)
tldr: phone stuck in bootloop, computer wont recognize the phone, maybe because it keeps shutting off and then booting to the 1+ logo, then shutting off again, would drivers help? what can I do about the volume up button?
So for a while my volume up button hasn't been working, and the mega unbrick post shows that I need to hold the volume up button for at least 25 seconds and while holding, plug my phone in. I have also seen some posts that say the volume up button could be a software issue, and the button itself could be working, and it is just not registering, as well as someone saying that you could take the back off and manually press the button, instead of using the bar on the outside of the phone (would this work?). I have gotten the button to work in the past by pressing the volume up button to the side instead of straight in, but I haven't been able to get it to work since my phone got bricked.
Another issue: my phone is stuck in a boot loop, I can't access fastboot, and I'm unsure of recovery because my volume up button is not working. would it be worth it to deal with the constant vibrating to try to get it to recovery?
I have been able to shut the phone off by holding the power button for something like a minute and a half, though.
This is my first post, and if I have broken any rules I am very sorry, but I need help and am tired of not having a phone.
Thank you everyone,
Mark
Edit: this is what I did to root the phone:
1. download the toolkit
2. unlock bootloader (when fastbooting the phone said unlocked at the bottom, and a message about not being secure showed every time I rebooted the phone)
3. flashed twrp (no issues, still booted, recovery went to twrp. for some reason I had to flash multiple times as every now and then recovery would revert to stock op, although I did make a backup through twrp)
4. send supersu zip file to phone, install using twrp (phone would not boot, op logo stayed on phone for 2 hrs + until I rebooted to fastboot and tried to reinstall the backup I made, still nothing)
5. Try magisk (still stuck on op logo)
6. try to go back to stock, accidentally lock bootloader (now the phone is stuck in bootloop, don't know what to do from here as I cant get to fastboot and am unsure of recovery's accessibility.)
If you are sure you have a broken volume button, you need to replace it first in order to get the phone fix.
Correction:
Fastboot/bootloader = Power+Vol Up
Recovery = Power+Vol Down
This happened to me except I didn't even get anything appear on the screen -- the phone just periodically vibrated with the screen not even light up. I tried the reset toolkit which is meant to flash your phone back to normal using Qualcomm drivers or something, but that didn't work either. Eventually I had to send it to OnePlus who fixed it for free in under a week! They said the motherboard had failed.
I hope you get this fixed!
Thanks
150208 said:
If you are sure you have a broken volume button, you need to replace it first in order to get the phone fix.
Correction:
Fastboot/bootloader = Power+Vol Up
Recovery = Power+Vol Down
Click to expand...
Click to collapse
thanks for the correction, I will keep trying the volume buttons, if it doesn't work by the end of today I will search for a new volume button.
Thanks again,
mark
Ouch
badabdba said:
This happened to me except I didn't even get anything appear on the screen -- the phone just periodically vibrated with the screen not even light up. I tried the reset toolkit which is meant to flash your phone back to normal using Qualcomm drivers or something, but that didn't work either. Eventually I had to send it to OnePlus who fixed it for free in under a week! They said the motherboard had failed.
I hope you get this fixed!
Click to expand...
Click to collapse
Damn, that sucks, and besides being unfixable (doubt it), this is my biggest fear. I'm in the US and really don't want to have to ship my phone to china to have it fixed. If you are in the US as well do you know if there is a OnePlus branch I can send it to in the US?
Thank you,
Mark
MarkTheFur said:
Damn, that sucks, and besides being unfixable (doubt it), this is my biggest fear. I'm in the US and really don't want to have to ship my phone to china to have it fixed. If you are in the US as well do you know if there is a OnePlus branch I can send it to in the US?
Thank you,
Mark
Click to expand...
Click to collapse
There seems to be one in Texas. Anyway, contact OnePlus and they may try to solve it over the air.
Apart from that, did you install the Qualcom drivers properly? Even with your faulty power button, try to hold it down for 40+ seconds (for the phone to switch off) and then immediately hold down the volume up button for 10 seconds and then plug in the phone to the PC. I know I am merely repeating the instructions of Naman Bhalla in his Mega Unbrick Guide but it is crucial to do them correctly especially the installation of the drivers. Try these steps repeatedly because for some people, the phone gets recognised after repeated attempts. Or else replace the power button and then try these steps.
I had to use the Guide last month and successfully resurrected my dead phone.
MarkTheFur said:
... what can I do about the volume up button?
Click to expand...
Click to collapse
Can you boot into recovery by pressing power+volume down buttons?
Update: Got phone to show on computer as qualcomm under coms and ports
So last night I went ahead and held volume up for about 20 seconds, then plugged the phone in, keeping the volume up button pressed the entire time. my phone stopped bootlooping and showed up as a qualcom device! So I have downloaded the new driver the stock os, and am going to proceed to try to unbrick my phone.
Wish me luck,
Mark
Yes, I did, and its working so far
tnsmani said:
There seems to be one in Texas. Anyway, contact OnePlus and they may try to solve it over the air.
Apart from that, did you install the Qualcom drivers properly? Even with your faulty power button, try to hold it down for 40+ seconds (for the phone to switch off) and then immediately hold down the volume up button for 10 seconds and then plug in the phone to the PC. I know I am merely repeating the instructions of Naman Bhalla in his Mega Unbrick Guide but it is crucial to do them correctly especially the installation of the drivers. Try these steps repeatedly because for some people, the phone gets recognised after repeated attempts. Or else replace the power button and then try these steps.
I had to use the Guide last month and successfully resurrected my dead phone.
Click to expand...
Click to collapse
I still need to turn off the signed drivers features ( a huge bi*ch, I have to use another computer to contact microsoft or something to get my computer to load when I turn off safe boot or whatever its called), but once I do that I can install the driver and attempt to reinstall the stock os. Hopefully everything will go well.
Thank you,
Mark
Not as far as I know
rk2612 said:
Can you boot into recovery by pressing power+volume down buttons?
Click to expand...
Click to collapse
So far recovery has not been loading, just the bootloop, but I have gotten the phone to power off by pressing the power button for 40 seconds, and the volume up button plus plugging in does make the phone register as qualcom 9008 or something like that. Basically everything is going well so far, and the faulty vol button seems to have been a software bug, as it does work when plugging it in. I will try to get to fast boot, but it did not work last time.
Thank you,
Mark
MarkTheFur said:
So far recovery has not been loading, just the bootloop, but I have gotten the phone to power off by pressing the power button for 40 seconds, and the volume up button plus plugging in does make the phone register as qualcom 9008 or something like that. Basically everything is going well so far, and the faulty vol button seems to have been a software bug, as it does work when plugging it in. I will try to get to fast boot, but it did not work last time.
Thank you,
Mark
Click to expand...
Click to collapse
Glad to hear that there is some progress. Best of luck and keep us informed.
The first problem I encountered while rooting my phone was that TWRP wouldn't stick, even though I didn't choose read only (ie i allowed it to make system modifications on the first TWRP boot) after rebooting
and booting back into recovery I would boot into stock recovery, instead of TWRP. So I tried flashing twrp, booting into it and rooting the phone, which was successful!
THE ROOT was successful, TWRP still didn't stick, every time I want to boot into TWRP I have to boot into it via fastboot.
Getting to the main problem, I booted into twrp, flashed a custom rom and got stuck in a bootloop while rebooting. It reboots every 15 seconds, I have kept the power button pressed for almost 2 minutes it doesn't stop the bootloop, I tried other combinations of vol buttons and power buttons does nothing.
One weird thing is that while it's in the loop I just have to press the vol down button and it boots into fastboot (as opposed to both the power button and vol down) when I boot into fastboot it stays there for about 6-7 seconds before rebooting, I tried booting into twrp through fastboot, but before I am able to enter the decryption password to start twrp, the phone reboots.
Should I let it run out of battery? will that stop the bootloop? I have a backup in twrp but I can't access twrp!
Does anyone have a solution?
[update] I let it run out of battery and on charging it continued the bootloop, with great difficulty i managed to install stock img file but the device just wont quit the bootloop
LeonDsouza123 said:
The first problem I encountered while rooting my phone was that TWRP wouldn't stick, even though I didn't choose read only (ie i allowed it to make system modifications on the first TWRP boot) after rebooting
and booting back into recovery I would boot into stock recovery, instead of TWRP. So I tried flashing twrp, booting into it and rooting the phone, which was successful!
THE ROOT was successful, TWRP still didn't stick, every time I want to boot into TWRP I have to boot into it via fastboot.
Getting to the main problem, I booted into twrp, flashed a custom rom and got stuck in a bootloop while rebooting. It reboots every 15 seconds, I have kept the power button pressed for almost 2 minutes it doesn't stop the bootloop, I tried other combinations of vol buttons and power buttons does nothing.
One weird thing is that while it's in the loop I just have to press the vol down button and it boots into fastboot (as opposed to both the power button and vol down) when I boot into fastboot it stays there for about 6-7 seconds before rebooting, I tried booting into twrp through fastboot, but before I am able to enter the decryption password to start twrp, the phone reboots.
Should I let it run out of battery? will that stop the bootloop? I have a backup in twrp but I can't access twrp!
Does anyone have a solution?
[update] I let it run out of battery and on charging it continued the bootloop, with great difficulty i managed to install stock img file but the device just wont quit the bootloop
Click to expand...
Click to collapse
1. Try flashing new recovery image using TWRP booted via fastboot.
2. Does your phone had contact with any fluid or was in place with high humidity level for longer time? Your power button is short circuited. In other words it is in pressed state all the time. I had same problem on my previous P2 when I came from 1h running session in light rain. Some sweat and/or water got inside my volume down button and same thing happened.
In my case the phone button recovered itself after drying and clicking it a lot of times
Kielbek said:
1. Try flashing new recovery image using TWRP booted via fastboot.
2. Does your phone had contact with any fluid or was in place with high humidity level for longer time? Your power button is short circuited. In other words it is in pressed state all the time. I had same problem on my previous P2 when I came from 1h running session in light rain. Some sweat and/or water got inside my volume down button and same thing happened.
In my case the phone button recovered itself after drying and clicking it a lot of times
Click to expand...
Click to collapse
I can't access TWRP as the phone doesn't give me enough time to enter the password for decryption, which is asked at the start every time you boot into TWRP, I get like 5 seconds in TWRP before the phone reboots
It is possible that the power button is spoilt as I have sweaty hands...
LeonDsouza123 said:
I can't access TWRP as the phone doesn't give me enough time to enter the password for decryption, which is asked at the start every time you boot into TWRP, I get like 5 seconds in TWRP before the phone reboots
It is possible that the power button is spoilt as I have sweaty hands...
Click to expand...
Click to collapse
That's the reason. I know that pain. You should try pressing that button with different pressure (but be careful) and move you finger while doing it. Maybe it will recover itself. If not you should find someone trusted who will open the phone and clean the buttons from the inside. It's a shame that Lenovo just left this construction vunerable like that.
After you get your P2 working properly again then just buy case that will cover whole buttons to prevent situations like this next time. Also make sure to clean it regullary inside.
Help me
If you found your way out then help me