Related
Hi and thanks for taking the time to read this
My brother tried to do the update of his nexus through the phone download (not through the sd card or connecting to a computer). Since this it will not start up and if i go to download mode it says that it is downloading constantly (have left for hours).
I can make it to the clockworkmod recovery v6.0.1.0 but unfortunately my brother didnt make a backup before trying to update to 4.2 jellybean.
The unfortunate part of this equation is that i cant access the phone via usb as the drivers wont install and the phone doesnt have an sd card slot except the sim card slot. So placing the correct files on the phone is proving too hard for me to complete.
Sorry if this situation has been covered before but i have searched for about 1.5 hours now to no avail. I would very much appreciate if someone can take me through how to get this phone working in any way possible (i dont care if he loses all data and goes back to stock).
Regards
Sam from New Zealand
samakbuchanan said:
Hi and thanks for taking the time to read this
My brother tried to do the update of his nexus through the phone download (not through the sd card or connecting to a computer). Since this it will not start up and if i go to download mode it says that it is downloading constantly (have left for hours).
I can make it to the clockworkmod recovery v6.0.1.0 but unfortunately my brother didnt make a backup before trying to update to 4.2 jellybean.
The unfortunate part of this equation is that i cant access the phone via usb as the drivers wont install and the phone doesnt have an sd card slot except the sim card slot. So placing the correct files on the phone is proving too hard for me to complete.
Sorry if this situation has been covered before but i have searched for about 1.5 hours now to no avail. I would very much appreciate if someone can take me through how to get this phone working in any way possible (i dont care if he loses all data and goes back to stock).
Regards
Sam from New Zealand
Click to expand...
Click to collapse
CWM recovery offers the ADB interface. I would:
1. get the naked driver package (see Efrant's guide)
2. boot device into recovery and connect usb cable
3. open windows device manager, find your device and manually update the driver
4. use adb to backup the /sdcard to your computer
5. flash 4.2 stock images using fastboot
6. done
Petrovski80 said:
CWM recovery offers the ADB interface. I would:
1. get the naked driver package (see Efrant's guide)
2. boot device into recovery and connect usb cable
3. open windows device manager, find your device and manually update the driver
4. use adb to backup the /sdcard to your computer
5. flash 4.2 stock images using fastboot
6. done
Click to expand...
Click to collapse
op, if you just want to get the device to working state again, and dont care about any data:
1. get the naked driver package (see Efrant's guide)
2. boot device into bootloader and connect usb cable
3. open windows device manager, find your device and manually update the driver
5. flash 4.2 stock images using fastboot
step 3 is the same, the same procedure, the same driver; windows is dumb so you have to tell it again when device is in bootloader (which, btw, is NOT the same as download mode).
Hi and thank you for the replies.
I have downloaded the naked driver but cant get it to work. I have followed the steps to make it work but i get to the device manager and there is no option for uninstalling current driver (as it has none currently). It only has update driver software (which if i use windows to search for it cant find any) and properties. The Galaxy Nexus icon in the device manager has the yellow exclamation mark sign on it. I can
When i try to manually find the naked driver it comes up with the following error
Windows found driver software for your device but encountered an error while attempting to install it.
Google Galaxy Nexus ADB Interface
Access Denied.
Where to from here lads, i appreciate the input
samakbuchanan said:
Hi and thank you for the replies.
I have downloaded the naked driver but cant get it to work. I have followed the steps to make it work but i get to the device manager and there is no option for uninstalling current driver (as it has none currently). It only has update driver software (which if i use windows to search for it cant find any) and properties. The Galaxy Nexus icon in the device manager has the yellow exclamation mark sign on it. I can
When i try to manually find the naked driver it comes up with the following error
Windows found driver software for your device but encountered an error while attempting to install it.
Google Galaxy Nexus ADB Interface
Access Denied.
Where to from here lads, i appreciate the input
Click to expand...
Click to collapse
if you're using windows 7, i read something about you need to disable windows digital driver signature check, or something in those lines.
can't help any further on that subject, since i'm a Linux user (Windows knowledge is very limited) and also that is an operating system's issue and would be better discussed in a Windows forum, IMO.
bk201doesntexist said:
if you're using windows 7, i read something about you need to disable windows digital driver signature check, or something in those lines.
can't help any further on that subject, since i'm a Linux user (Windows knowledge is very limited) and also that is an operating system's issue and would be better discussed in a Windows forum, IMO.
Click to expand...
Click to collapse
Thank you for another helpful reply! Yes i am using windows 7 - i will try to perform the task now - results soon. In the meantime if anyone else knows instructions on how to do this i would love to hear
I am at work and dont have administrator settings on windows 7 so i went to an older computer and started fastboot.exe. I went to recover and there was the IP address of the computer went to that and recovered. From there i went to reboot and now i am just getting a Google in the middle of the phone (as before). I will wait some time to see if it will start up now. If not what is my plan?
So i havent got any closer to having a usable phone.
Im up to this step:
"flash 4.2 stock images using fastboot" how do i do this? i have fastboot and i have the stock image
samakbuchanan said:
So i havent got any closer to having a usable phone.
Im up to this step:
"flash 4.2 stock images using fastboot" how do i do this? i have fastboot and i have the stock image
Click to expand...
Click to collapse
[HOW-TO] [GSM & CDMA] Return to stock for ALL Galaxy Nexus phones (latest JOP40C)
Thanks for that i had since found that and have printed it and will work through each step methodically. I have the stock image on download.
I have spent the best part of my working day on it now. Fingers crossed it all works out.
Thanks to all who have helped me through this far
Let me say beforehand that I am a lifetime lurker. I would not be posting here if I hadn't already spent at least two days scouring the web for an answer.
My HTC Desire HD cannot connect to HTC Sync, but it can connect as a storage device, and can be seen by adb. Whenever it connects while in hboot/fastboot, it will flicker "USB" a few times before Windows tell me it's not recognized (Device failed enumeration code 43). This includes using the RUU wizard from HTC. That will just make it stick on "RUU" in the bootloader.
I have tried every driver download suggested on this site. I have switched USB cables three times (all htc cables). I have used two seperate computers (Windows 8 and Windows 8.1).
I'll admit I'm a nooby specifically to Androids. All I want to do is flash new ROMs/root my device. As far as I know this is step one, and I can't go any further until I've unlocked my bootloader.
EDIT: SOLVED
HTC Desire HD drivers really hates Windows 8 and 8.1. Installed Windows 7 32-bit and it worked just fine.
That error can be a pain in the ass. I have it as well. I believe disabling griver signature enforcement in win8 (it's your OS, isn't it?) should allow installing adb drivers, but I was too lazy to check it. As a workaround I instead flash the boot.img in bootloader by putting it to PD98IMG.zip
I can upload you a template, leave the txt in it and replace the boot.img with your desired one, choose store (none) compression level, then put the zip directly (don't use folders) in sd card
EDIT: I didn't fully read your post before. If you don't have S-OFF most probably you can't get away without adb drivers..
Turned off device signing. No effect.
Have you tried now manually installing drivers in device manager while the phone is in unrecognized state? Does it still say the drivers are incompatible?
If your OS is 64bit, you need these http://d-h.st/23V
I have those drivers. I installed them manually. I tried the updating the drivers through device manager and pointing them directly to the drivers folder I need, and Windows is insistent that not having ANY drivers installed is the best driver to have installed for my device.
I am getting a pop up saying that the device is failing to to start. It's not like other usb devices I might have plugged in and they just sit there in at least their correct category in device manager.
The part that ticks me off most, is that this exact problem on this exact model has been solved on three different forums, and each time the OP just said "nvm I fixed it" and never even bothered to explain how for the rest of us.
It's really hard not to curse right now.
in device manager update dialog goto
browse my computer --> let me pick --> have disk --> choose the .inf from the drivers path.
Ya, I had tried that too. None of them will work. It says the file I chose doesn't have compatible software for my device.
Once again, this only happens in the hboot/fastboot/RUU. Once the phone has loaded the OS it works totally completely fine, save for HTC Sync not seeing the phone and vice versa. I don't understand why some drivers would only work sometimes unless something is wrong with my bootloader, and if so, how do i fix it?
have you tried un-installing HTC SYNC?
SuperMechaCow said:
Once again, this only happens in the hboot/fastboot/RUU. Once the phone has loaded the OS it works totally completely fine, save for HTC Sync not seeing the phone and vice versa. I don't understand why some drivers would only work sometimes unless something is wrong with my bootloader, and if so, how do i fix it?
Click to expand...
Click to collapse
Nothing is wrong with your phone, same thing happens to me, I just thought disabling driver signing should fix it, like I said I was too lazy to check it since I found workaround for my needs.
TheJokah said:
have you tried un-installing HTC SYNC?
Click to expand...
Click to collapse
It is currently uninstalled.
@smoger:
I would try your workaround, but I' m not sure where to obtain the boot image I need. Also, I thought you could only change the S-Off if your bootloader was unlocked anyways?
Power down DHD and connect it to PC. I realized, my win7 was installing drivers, while phone was off.
Sent from my HTC Desire HD using xda app-developers app
ammo12 said:
Power down DHD and connect it to PC. I realized, my win7 was installing drivers, while phone was off.
Click to expand...
Click to collapse
It appears to be the same device/drivers when powered off or when in the Android environment. While in the bootloader, it shows as an unknown device.
I also noticed that only when I am trying to update via RUU, it says instead "Device Descriptor Request Failed"
SuperMechaCow said:
@smoger:
I would try your workaround, but I' m not sure where to obtain the boot image I need.
Click to expand...
Click to collapse
The boot.img is in the ROM-zip-file packed. But I think, if its a RUU it is called PD98...img
Try this, I know its from Samsung, but this installs fastboot drivers and drivers used for ADB access
https://www.dropbox.com/s/vqfuv8fifmrkkxt/SAMSUNG_USB_Driver_for_Mobile_Phones.zip
For the set of Google Drivers, go here too http://d-h.st/23V
My drivers list does not show the Google or HTC drivers like yours does after installing all the things in your links. In fact, that's the fourth time I've downloaded those Google/HTC Win7 64x drivers from people around the web. They are not in my drivers list after installing them via the INF files. I must be doing something wrong.
SuperMechaCow said:
My drivers list does not show the Google or HTC drivers like yours does after installing all the things in your links. In fact, that's the fourth time I've downloaded those Google/HTC Win7 64x drivers from people around the web. They are not in my drivers list after installing them via the INF files. I must be doing something wrong.
Click to expand...
Click to collapse
Did you browse to the folder where the manual driver files reside?
Sent from my Desire HD using Tapatalk 4
SuperMechaCow said:
Ya, I had tried that too. None of them will work. It says the file I chose doesn't have compatible software for my device.
Click to expand...
Click to collapse
SuperMechaCow said:
I have those drivers. I installed them manually. I tried the updating the drivers through device manager and pointing them directly to the drivers folder I need, and Windows is insistent that not having ANY drivers installed is the best driver to have installed for my device.
Click to expand...
Click to collapse
To be exact I have:
Tried HTC Sync
Tried HTC Drivers Installer
Tried to Automatically search for drivers
Tried to install drivers by using the inf Install option
Tried to manually select drivers by pointing to the folder the Win7 64x drivers were placed
Tried to manually install by picking out the exact inf files
Tried to install from device drivers list, were they were not listed
Tried these steps with driver signing turned off
Tried all of these steps with another PC
I still think the issue is related to the fact that it only has problems in the bootloader menu
Ok, like u know I had this issue. Now I randomly managed to fix it when I needed adb drivers for my new toy (Sanei tablet for 40$ lol)
The mistake I was making is that I was trying to install the drivers while device was in fastboot, but apparently you can get away with casual "My HTC" drivers which can be installed when DHD is booted into Android. It looks likethe phone is not being detected from bootloader (it doesn't like any of the drivers I had tried), but I can fully use ADB while it's in recovery or starting/trying to boot OS, so it should be enough for rooting/unlocking bootloader.
I remember with HTC Wildfire I had drivers package with seperate drivers for Android and fastboot, so I had to install different driver after rebooting to fastboot, but with these new drivers and win8 it doesn't work out this way.
Solved. Used Windows 7 32-bit. Windows 8.1 was the culprit.
Similar issue
SuperMechaCow said:
Solved. Used Windows 7 32-bit. Windows 8.1 was the culprit.
Click to expand...
Click to collapse
I am facing the same problem and I too have tried different methods like you did. Am using Windows 8.
Gotta try on Windows 7. Shall update if that solves my problem too.
Windows 8.1; but had same problem with Windows 7 computer.
USB device not recognized
The last USB device you connected to this computer malfunctioned. And Windows does not recognize it.
Windows has stopped this device because it has reported
problems. (Code 43) A request for the USB device descriptor failed
Tried using WUGS Toolkit to install drivers, not happening.
The phone charges via usb port with no problems
On top of that, daughter wiped phone, there are no ROMS, or usable backups.
I can get into TWRP Recovery, but it can recover what isn't there. Tried factory
reset, still nothing. No matter what I do, I get No OS Installed! Are you
sure you wish to reboot? If I do reboot, just get GOOGLE screen with lock
symbol.
Without being able to get a computer to see the phone, I can't get a ROM to
load.
Maybe change USB port with cable? But I don't want to do that if the problem
is software related.
Any ideas what I can do???
I just went through something similar like this last week, what a pain in the A$$.
Not entirely sure if this will fix your issue, but hopefully it'll help some how.
I ended up having to manually install galaxy nexus driver so I could sideload a ROM since I formatted my internal storage to test out this new F2FS BS... Anyways.
LOL
First you'll need to download and unzip "universal naked driver 0.72" Google it.
Now, without your GN connected open device manager and THEN when you plug in your GN to your PC you should see it pop up in the portable devices section.
AND also under other devices there should be "galaxy nexus" right click on it and click "update driver software"
Click "browse my computer for driver software" select the unzipped universal naked driver folder, click next and click "install this driver software anyway"
Now it should show "Google galaxy nexus ADB interface" in device manager under Samsung Android Phone.
Reboot GN into bootloader
OR
recovery (if you have a ADB supported recovery eg. TWRP 2.7.0.0, and enter ADB mode)
Now there are 2 ways to do flash an Android OS, some may find 1 easier then the other:
download/install "Wug's Nexus Root Toolkit aka NRT v1.8.3.sfx"
Google it.
Run NRT and it'll instruct and guide you through the steps required and whatever is needed to continue, eg. Select device, download TWRP 2.7.0.0...ETC.
Or
Download/install ADB setup 1.3
Google it.
I found this method a little more simpler.
Open the folder you have your ROM/gapps zip files saved on your PC, hold down shift key and right click on the folder, click "Open command window here"
Now in the command window type in "adb sideload XXXXX.zip"
XXXXX = COPY/PASTE the ROM file name. Eg. 20140615PA443RC2.zip
Press enter and now it'll flash the ROM onto your GN.
Repeat the same steps for gapps/kernel zip files.
Reboot your GN and enjoy.
BTW
I'm still loving running ParanoidAndroid Jellybean 4.1.2.
Its like pain in the A** to install phone/adb drivers in win8/8.1
I had a similar issue with my gNex a while ago but i had the drivers installed in my pc so it wasn't that difficult.
Why don't you try to install this toolkit http://forum.xda-developers.com/gal.../gnex-toolkit-v11-1-0-drivers-backup-t1392310
When you run the toolkit, it may ask you to select your device, build number etc and also about installing device drivers.
Install the drivers through it and then connect the device in recovery (twrp) mode.
it should detect it and then you can push files/roms to sdcard (internalMemory) using adb push or the built in options in the toolkit.
then flash the rom and you're done
and i recommend using win7 or xp or vista for doing this because the driver installation in win8/8.1 is a bit difficult compared with other previous windows versions but there is still a way to install drivers in win8/8.1 its just a lengthy process
All the best :good:
stargazer127 said:
Windows 8.1; but had same problem with Windows 7 computer.
USB device not recognized
The last USB device you connected to this computer malfunctioned. And Windows does not recognize it.
Windows has stopped this device because it has reported
problems. (Code 43) A request for the USB device descriptor failed
Tried using WUGS Toolkit to install drivers, not happening.
The phone charges via usb port with no problems
On top of that, daughter wiped phone, there are no ROMS, or usable backups.
I can get into TWRP Recovery, but it can recover what isn't there. Tried factory
reset, still nothing. No matter what I do, I get No OS Installed! Are you
sure you wish to reboot? If I do reboot, just get GOOGLE screen with lock
symbol.
Without being able to get a computer to see the phone, I can't get a ROM to
load.
Maybe change USB port with cable? But I don't want to do that if the problem
is software related.
Any ideas what I can do???
Click to expand...
Click to collapse
isajoo said:
I just went through something similar like this last week, what a pain in the A$$.
Not entirely sure if this will fix your issue, but hopefully it'll help some how.
I ended up having to manually install galaxy nexus driver so I could sideload a ROM since I formatted my internal storage to test out this new F2FS BS... Anyways.
LOL
First you'll need to download and unzip "universal naked driver 0.72" Google it.
Now, without your GN connected open device manager and THEN when you plug in your GN to your PC you should see it pop up in the portable devices section.
AND also under other devices there should be "galaxy nexus" right click on it and click "update driver software"
Click "browse my computer for driver software" select the unzipped universal naked driver folder, click next and click "install this driver software anyway"
Now it should show "Google galaxy nexus ADB interface" in device manager under Samsung Android Phone.
Reboot GN into bootloader
OR
recovery (if you have a ADB supported recovery eg. TWRP 2.7.0.0, and enter ADB mode)
Now there are 2 ways to do flash an Android OS, some may find 1 easier then the other:
download/install "Wug's Nexus Root Toolkit aka NRT v1.8.3.sfx"
Google it.
Run NRT and it'll instruct and guide you through the steps required and whatever is needed to continue, eg. Select device, download TWRP 2.7.0.0...ETC.
Or
Download/install ADB setup 1.3
Google it.
I found this method a little more simpler.
Open the folder you have your ROM/gapps zip files saved on your PC, hold down shift key and right click on the folder, click "Open command window here"
Now in the command window type in "adb sideload XXXXX.zip"
XXXXX = COPY/PASTE the ROM file name. Eg. 20140615PA443RC2.zip
Press enter and now it'll flash the ROM onto your GN.
Repeat the same steps for gapps/kernel zip files.
Reboot your GN and enjoy.
BTW
I'm still loving running ParanoidAndroid Jellybean 4.1.2.
Click to expand...
Click to collapse
OK, downloaded universal naked driver 0.72, connected gnex, but it only shows up under Universal Serial Bus controllers as Unknown USB Device (Device Descriptor Request Failed), not under Portable Devices, and will not allow install of of universal naked drivers, & yes I have toggled to allow win 8.1 to installed unsigned drivers. Since I cannot get phone to turn on to full android, it is not recognized. Any other suggestions?
KingWickedd said:
Its like pain in the A** to install phone/adb drivers in win8/8.1
I had a similar issue with my gNex a while ago but i had the drivers installed in my pc so it wasn't that difficult.
Why don't you try to install this toolkit http://forum.xda-developers.com/gal.../gnex-toolkit-v11-1-0-drivers-backup-t1392310
When you run the toolkit, it may ask you to select your device, build number etc and also about installing device drivers.
Install the drivers through it and then connect the device in recovery (twrp) mode.
it should detect it and then you can push files/roms to sdcard (internalMemory) using adb push or the built in options in the toolkit.
then flash the rom and you're done
and i recommend using win7 or xp or vista for doing this because the driver installation in win8/8.1 is a bit difficult compared with other previous windows versions but there is still a way to install drivers in win8/8.1 its just a lengthy process
All the best :good:
Click to expand...
Click to collapse
OK, tried this too, but it only shows up under Universal Serial Bus controllers as Unknown USB Device (Device Descriptor Request Failed), not under Portable Devices, tried 1st way by installing drivers, then using PDA, cannot complete PDA driver installation because it can't see the phone. & yes I have toggled to allow win 8.1 to installed unsigned drivers. Since I cannot get phone to turn on to full android, it is not recognized. Any other suggestions?
stargazer127 said:
OK, tried this too, but it only shows up under Universal Serial Bus controllers as Unknown USB Device (Device Descriptor Request Failed), not under Portable Devices, tried 1st way by installing drivers, then using PDA, cannot complete PDA driver installation because it can't see the phone. & yes I have toggled to allow win 8.1 to installed unsigned drivers. Since I cannot get phone to turn on to full android, it is not recognized. Any other suggestions?
Click to expand...
Click to collapse
You have to go to the device manager, double click on the "unknown usb..."
a dialog box may appear and then click on the 'driver' tab.
There u may find update/install driver button.
click on it and another window may open.
then select browse my computer for driver software and go to the respective folder where the drivers are.
then click next and it may install the drivers.
if you have installed the toolkit then you may find a folder in the toolkit's installation folder which has drivers in it.go through it if you want :good:
Okay so now that I've scanned pretty much all of what the internet has to offer on this issue, I'm helpless and forced to write a new thread here about this.
Yes, a similar question has been replied to a million times before, but absolutely none of that helped, made no difference whatsoever.
So earlier, I was on the stock rom, with TWRP flashed and root access. But wanted to switch to the community build. Tried the twrp trick to install the CB but that didn't work, so flashed the stock OP3 rom and flashed community build.
All went fine, until I tried flashing back TWRP. Used the traditional ADB method of doing that, seemed to have flashed it but tried going into recovery only to be presented with a black screen. I got fed up of that trying to fix it for a whole day so I just left it, because I could still boot into the OS and that worked fine.
Fast forward to about a week later; somehow the flash didn't work and I still have stock recovery. Now I try flashing TWRP again, but I discover that my device doesn't get detected in fastboot. It absolutely refuses to.
It DOES, however, gets detected in the OS just fine.
I've tried every which way, absolutely NOTHING seems to work AT ALL.
- OEM unlocking is checked, if that makes a difference
- USB debugging is turned on
- Uninstalled all USB drivers related to the device, and installed them via device manager (but it gave me this error:
"the folder you specified doesn't contain a compatible software driver for your device. If the folder contains a driver, make sure it is designed to work with windows for x64-based systems)
seeing as I'm on an x64 version of Windows (its worked before with my Nexus 5, I swear)
- Tried it with different adb fastboot files, from all over the internet. All of them show just that blank space after I type in 'adb devices'
- Installed universal adb drivers.
- Samsung drivers.
- Obviously the official OnePlus drivers.
- Used Usbdeview to uninstall / force stop and re-installed the drivers.
- All in one tool
Now I'm thinking, I should try to re-lock the bootloader and unlock it again, or do like hard rest sort of things. I have no idea though, how this would affect the detection in fastboot.
Anyone have any ideas? Because I'm out of all of them, and so is most of internet.
TL;DR - Adb devices detects phone while booted in OS, but not in fastboot. Tried all methods, nothing works. Going to do lock bootloader then unlock it and try again, if not that then going to do a clean wipe and install the community build again, hoping that would work. Should I?
railpressureflip said:
Okay so now that I've scanned pretty much all of what the internet has to offer on this issue, I'm helpless and forced to write a new thread here about this.
Yes, a similar question has been replied to a million times before, but absolutely none of that helped, made no difference whatsoever.
So earlier, I was on the stock rom, with TWRP flashed and root access. But wanted to switch to the community build. Tried the twrp trick to install the CB but that didn't work, so flashed the stock OP3 rom and flashed community build.
All went fine, until I tried flashing back TWRP. Used the traditional ADB method of doing that, seemed to have flashed it but tried going into recovery only to be presented with a black screen. I got fed up of that trying to fix it for a whole day so I just left it, because I could still boot into the OS and that worked fine.
Fast forward to about a week later; somehow the flash didn't work and I still have stock recovery. Now I try flashing TWRP again, but I discover that my device doesn't get detected in fastboot. It absolutely refuses to.
It DOES, however, gets detected in the OS just fine.
I've tried every which way, absolutely NOTHING seems to work AT ALL.
- OEM unlocking is checked, if that makes a difference
- USB debugging is turned on
- Uninstalled all USB drivers related to the device, and installed them via device manager (but it gave me this error:
"the folder you specified doesn't contain a compatible software driver for your device. If the folder contains a driver, make sure it is designed to work with windows for x64-based systems)
seeing as I'm on an x64 version of Windows (its worked before with my Nexus 5, I swear)
- Tried it with different adb fastboot files, from all over the internet. All of them show just that blank space after I type in 'adb devices'
- Installed universal adb drivers.
- Samsung drivers.
- Obviously the official OnePlus drivers.
- Used Usbdeview to uninstall / force stop and re-installed the drivers.
- All in one tool
Now I'm thinking, I should try to re-lock the bootloader and unlock it again, or do like hard rest sort of things. I have no idea though, how this would affect the detection in fastboot.
Anyone have any ideas? Because I'm out of all of them, and so is most of internet.
TL;DR - Adb devices detects phone while booted in OS, but not in fastboot. Tried all methods, nothing works. Going to do lock bootloader then unlock it and try again, if not that then going to do a clean wipe and install the community build again, hoping that would work. Should I?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=3485186
Having the exact same Problems with my OP3 running everything stock 3.2.7 expect for the fact the device is unlocked...
Would love to hear how the problem can be solved!
ELoTRIX said:
http://forum.xda-developers.com/showthread.php?t=3485186
Click to expand...
Click to collapse
Hmmm Windows 7.
I can most certainly try that but the real question now is; how the hell did it work previously on my Windows 10 machine and refuses to work now? But at least I have a solution to try out, in the mean time! Thanks!
railpressureflip said:
Okay so now that I've scanned pretty much all of what the internet has to offer on this issue, I'm helpless and forced to write a new thread here about this.
Yes, a similar question has been replied to a million times before, but absolutely none of that helped, made no difference whatsoever.
So earlier, I was on the stock rom, with TWRP flashed and root access. But wanted to switch to the community build. Tried the twrp trick to install the CB but that didn't work, so flashed the stock OP3 rom and flashed community build.
All went fine, until I tried flashing back TWRP. Used the traditional ADB method of doing that, seemed to have flashed it but tried going into recovery only to be presented with a black screen. I got fed up of that trying to fix it for a whole day so I just left it, because I could still boot into the OS and that worked fine.
Fast forward to about a week later; somehow the flash didn't work and I still have stock recovery. Now I try flashing TWRP again, but I discover that my device doesn't get detected in fastboot. It absolutely refuses to.
It DOES, however, gets detected in the OS just fine.
I've tried every which way, absolutely NOTHING seems to work AT ALL.
- OEM unlocking is checked, if that makes a difference
- USB debugging is turned on
- Uninstalled all USB drivers related to the device, and installed them via device manager (but it gave me this error:
"the folder you specified doesn't contain a compatible software driver for your device. If the folder contains a driver, make sure it is designed to work with windows for x64-based systems)
seeing as I'm on an x64 version of Windows (its worked before with my Nexus 5, I swear)
- Tried it with different adb fastboot files, from all over the internet. All of them show just that blank space after I type in 'adb devices'
- Installed universal adb drivers.
- Samsung drivers.
- Obviously the official OnePlus drivers.
- Used Usbdeview to uninstall / force stop and re-installed the drivers.
- All in one tool
Now I'm thinking, I should try to re-lock the bootloader and unlock it again, or do like hard rest sort of things. I have no idea though, how this would affect the detection in fastboot.
Anyone have any ideas? Because I'm out of all of them, and so is most of internet.
TL;DR - Adb devices detects phone while booted in OS, but not in fastboot. Tried all methods, nothing works. Going to do lock bootloader then unlock it and try again, if not that then going to do a clean wipe and install the community build again, hoping that would work. Should I?
Click to expand...
Click to collapse
You need modified twrp by @eng.sdk.
http://forum.xda-developers.com/showpost.php?p=68691560&postcount=56
I am having a similar issue. I have a brand new OP3. Everything stock. I'm attempting to unlock the bootloader and have found that while ADB recognises the phone, Fastboot doesn't. I'm pretty sure it's a driver issue and I have no idea how to fix.
Hello
Everything is working good
it seems to be a problem with adb Windows 10 IDK
, it is better to do it on Windows 7
Follow this :
http://forum.xda-developers.com/oneplus-3/how-to/oneplus-3-how-to-unlock-bootloader-t3398733
abhi0502 said:
You need modified twrp by @eng.sdk.
http://forum.xda-developers.com/showpost.php?p=68691560&postcount=56
Click to expand...
Click to collapse
I'm afraid you've missed the point, my friend.
If the phone does not get detected in the fastboot, it means I cannot flash anything, period. No original TWRP, no modified TWRP.
I had this exact issue and fixed it.
Fastboot would never see my device, no matter which driver package I tried or no matter how I tried to install or force the correct drivers. Turns out Windows 10 (and Windows 8) has a feature that completely prevents installation of unsigned drivers, which blocks the fastboot driver. If you're seeing "Kedracom" or "Android Device" in the device manager, then your driver is NOT actually installed. This is true even if Windows doesn't throw you an error message during install, or if you appear to force the installation. Even though it looks like you're doing the install correctly, Windows just ignores your unsigned drivers.
You need to temporarily disable the security feature to permit installation of unsigned drivers. This involves invoking a special restart function. Here's the howto for Win10: http://www.howtogeek.com/167723/how-...igned-drivers/
Once you've done this, on the next reboot you can do a forced install of the unsigned fastboot drivers you downloaded for the OP3. And simply rebooting your computer restores the security feature.
It's mostly because of the windows security over unsigned drivers.. Try the above method or just the cmd way..
Sent from my Xiaomi Mi 5 using XDA Labs
I'm trying to restore my Oneplus 9 Pro to factory defaults. I downloaded the latest stock OOS Img from the oneplus site and then followed the direction in this thread (https://forum.xda-developers.com/t/restore-oneplus-9-to-stock-via-fastboot-commands.4265153/) to extract the payload.bin file.
I have all the img files and I tried using the powershell script in the link posted above to flash all the imgs. It seems to get through everything, up to the point where it tries to flash the flashbootd partition. When it gets to that part, I get a bunch of errors stating that it can't write to it.
When I look at device manager in Windows, I see the "LE2125" device with a exclamation mark. The hardware ID for that device is:
USB\VID_18D1&PID_4EE0&REV_0504
USB\VID_18D1&PID_4EE0
I can't seem to find any compatible drivers that work for this. It works fine when I'm plugged in and at the booloader, and also in Windows, but when I go into fastbootd, it doesn't seem to recognize. I tried connecting to USB and USB-C connectors (I have an adapter that allows me to also plug into USB)
Anyway, I'm posting this because I can't seem to find much information about the driver or hardware ID, and I'm sure I'm not the first person with this issue. Any assistance is appreciated. Maybe I'm doing something wrong.
I had the issue in fastboot mode yesterday (with win11), I solved it by installing the Oneplus driver, loading windows "disabling driver signature enforcement" mode.
Thank you that did work for me, although I have to add that simpy installing the oneplus driver wasn't enough for me. I had to manually go into device manager right click the device --> update driver
Browse my computer for drivers
Let me pick from a list of available drivers on my computer
Show all Devices --> Next
Have Disk (Button)
Navigate to where you installed Oneplus drivers (Default: C:\Program Files (x86)\OnePlus USB Drivers)
Select "OnePlus_android_winusb.inf"
Select "Oneplus Android Bootloader Interface" and then just hit next/OK until it installs.
You might need to reboot after doing the above, but this worked for me.