Okay so now that I've scanned pretty much all of what the internet has to offer on this issue, I'm helpless and forced to write a new thread here about this.
Yes, a similar question has been replied to a million times before, but absolutely none of that helped, made no difference whatsoever.
So earlier, I was on the stock rom, with TWRP flashed and root access. But wanted to switch to the community build. Tried the twrp trick to install the CB but that didn't work, so flashed the stock OP3 rom and flashed community build.
All went fine, until I tried flashing back TWRP. Used the traditional ADB method of doing that, seemed to have flashed it but tried going into recovery only to be presented with a black screen. I got fed up of that trying to fix it for a whole day so I just left it, because I could still boot into the OS and that worked fine.
Fast forward to about a week later; somehow the flash didn't work and I still have stock recovery. Now I try flashing TWRP again, but I discover that my device doesn't get detected in fastboot. It absolutely refuses to.
It DOES, however, gets detected in the OS just fine.
I've tried every which way, absolutely NOTHING seems to work AT ALL.
- OEM unlocking is checked, if that makes a difference
- USB debugging is turned on
- Uninstalled all USB drivers related to the device, and installed them via device manager (but it gave me this error:
"the folder you specified doesn't contain a compatible software driver for your device. If the folder contains a driver, make sure it is designed to work with windows for x64-based systems)
seeing as I'm on an x64 version of Windows (its worked before with my Nexus 5, I swear)
- Tried it with different adb fastboot files, from all over the internet. All of them show just that blank space after I type in 'adb devices'
- Installed universal adb drivers.
- Samsung drivers.
- Obviously the official OnePlus drivers.
- Used Usbdeview to uninstall / force stop and re-installed the drivers.
- All in one tool
Now I'm thinking, I should try to re-lock the bootloader and unlock it again, or do like hard rest sort of things. I have no idea though, how this would affect the detection in fastboot.
Anyone have any ideas? Because I'm out of all of them, and so is most of internet.
TL;DR - Adb devices detects phone while booted in OS, but not in fastboot. Tried all methods, nothing works. Going to do lock bootloader then unlock it and try again, if not that then going to do a clean wipe and install the community build again, hoping that would work. Should I?
railpressureflip said:
Okay so now that I've scanned pretty much all of what the internet has to offer on this issue, I'm helpless and forced to write a new thread here about this.
Yes, a similar question has been replied to a million times before, but absolutely none of that helped, made no difference whatsoever.
So earlier, I was on the stock rom, with TWRP flashed and root access. But wanted to switch to the community build. Tried the twrp trick to install the CB but that didn't work, so flashed the stock OP3 rom and flashed community build.
All went fine, until I tried flashing back TWRP. Used the traditional ADB method of doing that, seemed to have flashed it but tried going into recovery only to be presented with a black screen. I got fed up of that trying to fix it for a whole day so I just left it, because I could still boot into the OS and that worked fine.
Fast forward to about a week later; somehow the flash didn't work and I still have stock recovery. Now I try flashing TWRP again, but I discover that my device doesn't get detected in fastboot. It absolutely refuses to.
It DOES, however, gets detected in the OS just fine.
I've tried every which way, absolutely NOTHING seems to work AT ALL.
- OEM unlocking is checked, if that makes a difference
- USB debugging is turned on
- Uninstalled all USB drivers related to the device, and installed them via device manager (but it gave me this error:
"the folder you specified doesn't contain a compatible software driver for your device. If the folder contains a driver, make sure it is designed to work with windows for x64-based systems)
seeing as I'm on an x64 version of Windows (its worked before with my Nexus 5, I swear)
- Tried it with different adb fastboot files, from all over the internet. All of them show just that blank space after I type in 'adb devices'
- Installed universal adb drivers.
- Samsung drivers.
- Obviously the official OnePlus drivers.
- Used Usbdeview to uninstall / force stop and re-installed the drivers.
- All in one tool
Now I'm thinking, I should try to re-lock the bootloader and unlock it again, or do like hard rest sort of things. I have no idea though, how this would affect the detection in fastboot.
Anyone have any ideas? Because I'm out of all of them, and so is most of internet.
TL;DR - Adb devices detects phone while booted in OS, but not in fastboot. Tried all methods, nothing works. Going to do lock bootloader then unlock it and try again, if not that then going to do a clean wipe and install the community build again, hoping that would work. Should I?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=3485186
Having the exact same Problems with my OP3 running everything stock 3.2.7 expect for the fact the device is unlocked...
Would love to hear how the problem can be solved!
ELoTRIX said:
http://forum.xda-developers.com/showthread.php?t=3485186
Click to expand...
Click to collapse
Hmmm Windows 7.
I can most certainly try that but the real question now is; how the hell did it work previously on my Windows 10 machine and refuses to work now? But at least I have a solution to try out, in the mean time! Thanks!
railpressureflip said:
Okay so now that I've scanned pretty much all of what the internet has to offer on this issue, I'm helpless and forced to write a new thread here about this.
Yes, a similar question has been replied to a million times before, but absolutely none of that helped, made no difference whatsoever.
So earlier, I was on the stock rom, with TWRP flashed and root access. But wanted to switch to the community build. Tried the twrp trick to install the CB but that didn't work, so flashed the stock OP3 rom and flashed community build.
All went fine, until I tried flashing back TWRP. Used the traditional ADB method of doing that, seemed to have flashed it but tried going into recovery only to be presented with a black screen. I got fed up of that trying to fix it for a whole day so I just left it, because I could still boot into the OS and that worked fine.
Fast forward to about a week later; somehow the flash didn't work and I still have stock recovery. Now I try flashing TWRP again, but I discover that my device doesn't get detected in fastboot. It absolutely refuses to.
It DOES, however, gets detected in the OS just fine.
I've tried every which way, absolutely NOTHING seems to work AT ALL.
- OEM unlocking is checked, if that makes a difference
- USB debugging is turned on
- Uninstalled all USB drivers related to the device, and installed them via device manager (but it gave me this error:
"the folder you specified doesn't contain a compatible software driver for your device. If the folder contains a driver, make sure it is designed to work with windows for x64-based systems)
seeing as I'm on an x64 version of Windows (its worked before with my Nexus 5, I swear)
- Tried it with different adb fastboot files, from all over the internet. All of them show just that blank space after I type in 'adb devices'
- Installed universal adb drivers.
- Samsung drivers.
- Obviously the official OnePlus drivers.
- Used Usbdeview to uninstall / force stop and re-installed the drivers.
- All in one tool
Now I'm thinking, I should try to re-lock the bootloader and unlock it again, or do like hard rest sort of things. I have no idea though, how this would affect the detection in fastboot.
Anyone have any ideas? Because I'm out of all of them, and so is most of internet.
TL;DR - Adb devices detects phone while booted in OS, but not in fastboot. Tried all methods, nothing works. Going to do lock bootloader then unlock it and try again, if not that then going to do a clean wipe and install the community build again, hoping that would work. Should I?
Click to expand...
Click to collapse
You need modified twrp by @eng.sdk.
http://forum.xda-developers.com/showpost.php?p=68691560&postcount=56
I am having a similar issue. I have a brand new OP3. Everything stock. I'm attempting to unlock the bootloader and have found that while ADB recognises the phone, Fastboot doesn't. I'm pretty sure it's a driver issue and I have no idea how to fix.
Hello
Everything is working good
it seems to be a problem with adb Windows 10 IDK
, it is better to do it on Windows 7
Follow this :
http://forum.xda-developers.com/oneplus-3/how-to/oneplus-3-how-to-unlock-bootloader-t3398733
abhi0502 said:
You need modified twrp by @eng.sdk.
http://forum.xda-developers.com/showpost.php?p=68691560&postcount=56
Click to expand...
Click to collapse
I'm afraid you've missed the point, my friend.
If the phone does not get detected in the fastboot, it means I cannot flash anything, period. No original TWRP, no modified TWRP.
I had this exact issue and fixed it.
Fastboot would never see my device, no matter which driver package I tried or no matter how I tried to install or force the correct drivers. Turns out Windows 10 (and Windows 8) has a feature that completely prevents installation of unsigned drivers, which blocks the fastboot driver. If you're seeing "Kedracom" or "Android Device" in the device manager, then your driver is NOT actually installed. This is true even if Windows doesn't throw you an error message during install, or if you appear to force the installation. Even though it looks like you're doing the install correctly, Windows just ignores your unsigned drivers.
You need to temporarily disable the security feature to permit installation of unsigned drivers. This involves invoking a special restart function. Here's the howto for Win10: http://www.howtogeek.com/167723/how-...igned-drivers/
Once you've done this, on the next reboot you can do a forced install of the unsigned fastboot drivers you downloaded for the OP3. And simply rebooting your computer restores the security feature.
It's mostly because of the windows security over unsigned drivers.. Try the above method or just the cmd way..
Sent from my Xiaomi Mi 5 using XDA Labs
Related
Hey guys,
The power button on my phone stopped working this morning (without water damage). I'm preparing the phone to return to Samsung warranty, and in the process of reseting to stock and re-locking the OEM I noted that the phone does not respond to fastboot commands in the bootloader despite this working on the same system a week ago, no change in drivers or anything else. I installed PDAnet, still broken on Win 7 although I can reboot with adb.
I then tried this on OSX, again I can reboot with ADB, but the phone is unresponsive in fastboot.
I have three working hypotheses and I'm hoping someone can help me:
a) in some process of flashing my phone and being an uninformed n00b maybe I flashed something I shouldn't have or used some combination of partial fastboot flashes I shouldn't have. has this happened to anyone else?
b) whatever hardware damage knocked out the power button might have partially knocked out the bootloader
c) I just have really bad luck with driver set up and I just happened to mess up two different computer driver configurations but the phone is fine. to this end, I am setting up another Win 7 system fresh on a virtual drive as I'm typing, though I have little faith it will be different
update: fastboot commands didn't work on the other windows 7 virtual system, although adb reboot bootloader did
freaking a this is annoying.
i have a fully stock ROM and radio, anybody to know how to flash a new recovery image and lock the bootloader without accessing fastboot? Just have to get this ready to go back to Samsung so they can fix their own hardware mess ups.
they are 2 different drivers.
As much as I don't like using/recommending the Galaxy Nexus Toolkit (only because I feel it's better to actually learn everything you're doing), it's the easiest way I've found to get the Fastboot drivers installed.
http://forum.xda-developers.com/showthread.php?t=1392310
Thanks guys for your comments.
I've tried Android SDK drivers, PDANet, Universal Naked Driver, and now the one click toolkit mentioned above, some on three different operating systems (Win 7, Win 8, OSx) on 32 and 64 bit.
The wierdest part is that under device manager, no device shows up when the phone is in fastboot, no is there any noise or any recognition of the device being connected at all. It is completely, 100% silent. (again, ADB works when the phone is booted).
I recognize that this may not be possible, but does anyone know how to flash a recovery image without being in the bootloader mode?
If fastboot isnt working like it should, and you are sure it isnt user error, then take it for warranty.
Sent from my i9250
yeah fastboot + the power button (which was defunk in clockwork mod) are back online again, dunno for how long. agreed seems like a hardware/warranty issue.
Recoveries can be flashed with ROM Manager assuming you have SuperUser permissions, but otherwise you or the toolkit need fastboot working.
Sent from my Galaxy Nexus using xda app-developers app
Tl;dr: DM-VERITY error after upgrading, SIM card not recognized. Can't get fastboot to work to try out a solution. Everything is going to ****.
So... this one's a doozy.
I tried to install the update by dropping it onto my phone and using TWRP to install it, which I ended up having to update. After I updated, I get a brief second popup screen when I reboot telling me that there is an invalid DM-VERITY (it only pops up for a second). When the phone loads, it doesn't recognize SIMs.
I did some research and it looks like the issue can be fixed by flashing the stock recovery. So I go to flash the stock recovery, which requires the usage of fastboot. Which I always have problems with.
Sure enough, adb recognizes my device but fastboot doesn't. I have all the drivers downloaded, so I go check on my device in device manager. For some reason, it's always listed under "Portable Devices" no matter what I do... no matter whether I enable/disable USB debugging, MTP/PTP/Charging, etc. I was under the impression that a device not being recognized by fastboot meant that you had to go find it under "other devices" and manually update the drivers. However, the only options here are ADB drivers, not bootloader ones.
So I did more research. Turns out that Windows 10 is ****ty and you have to disable secure boot to install unsigned drivers. So I went into my BIOS, disabled it, booted into safe mode, reinstalled the drivers, and... nothing.
So I'm basically where I started and for the first time in a while, I have no clue what to do. Nothing's working. I even tried to load an older version of OxygenOS and install it with TWRP (sideloading didn't work), which didn't work. I'm totally stuck and I have no idea what to do.
If you don't care about your data, just use the unbrick guide method 2. Don't know about the first one, I have never used that. That will get you to a like new phone. You could even get 4.0.3 version, using the newer unbrick toolkit.
Windows 10 x64 isn't that sh**y. I've never had issues with the drivers, and they all install automatically (fastboot, adb, unbrick tool). They all work with 4 phones without any issues: OP3, Nexus 5X, Nexus 5, Nexus 4.
True, I had just unbrick my op3 2 days back by method 2 .
Well this was wild
So I did try to unbrick and got the Sahara communication error.
But I ended up fixing my problem! Someone on Reddit correctly pointed out that the dm-verity screen often exists simply as a result of unlocking the bootloader. I was assuming that one symptom caused the other. They suggested just reflashing OnePlus's 4.1.3 full ROM. I did it exactly the same way as I had when I got the error (with TWRP) and... it worked!
I'm astounded. My phone wouldn't work with fastboot, wasn't recognized by the unbrick toolkit, and had a host of other issues. I did 7 hours of work on it and the solution ended up being that I just needed to reinstall the OS (again). My hypothesis is that there was some hidden issue that resulted in part of the firmware being incorrectly updated, and when I wiped my device as part of my troubleshooting process it was ready to be reflashed with the OS.
Thank you guys so much anyway!
I had previously rooted my OP3, but accidentally updated it with the OTA open beta update, losing twrp recovery. I'm finding it incredibly difficult to flash twrp again to reroot.
The bootloader is still unlocked, and USB debugging is on with OEM unlocked, but I keep getting FAILED messages when I attempt to flash. "fastboot devices" shows the device (as a series of numbers).
I've tried using the OnePlus3&[email protected]_radaideh, but when attempting to flash it shows the below and then fails:
error: no devices/emulators found
I couldn't get it to work on my computer at home (win10) and read about problems with the OP3 drivers being unsigned (even with driver enforcement off). I'm also struggling on win7 - for some reason, the driver is listed in the Device Manager under the hardware group TP-LINK Android Phone and I can't get it to work using the OnePlus Android Bootloader Interface (under OnePlus, Inc.) or the Android Bootloader Interface (under Google, Inc.).
Could anyone suggest anything I should try?
Win10, Update & Security, Recovery, extended Start, there disable driver signing and then do your thing. Don't reboot or signing is active again.
emuandco said:
Win10, Update & Security, Recovery, extended Start, there disable driver signing and then do your thing. Don't reboot or signing is active again.
Click to expand...
Click to collapse
Thanks for the reply! I tried that and couldn't get past the issues people complained about in a thread on Reddit about Kedacom drivers (can't link).
I'm at work on win7 which I believe should be easier, but still struggling with the problem as described in the post above
justmast said:
Thanks for the reply! I tried that and couldn't get past the issues people complained about in a thread on Reddit about Kedacom drivers (can't link).
I'm at work on win7 which I believe should be easier, but still struggling with the problem as described in the post above
Click to expand...
Click to collapse
Did you use the drivers coming with the phone on a emulated CD drive? These worked very well for me in the past.
EDIT: Yes, Kedacom problem is nice. But changing the driver to the unsigned one manually worked for me in the past.
emuandco said:
Did you use the drivers coming with the phone on a emulated CD drive? These worked very well for me in the past.
EDIT: Yes, Kedacom problem is nice. But changing the driver to the unsigned one manually worked for me in the past.
Click to expand...
Click to collapse
Yes, I have tried those drivers (the OnePlus, Inc. ones). They worked for me when I rooted originally, I'm having trouble now though
justmast said:
Yes, I have tried those drivers (the OnePlus, Inc. ones). They worked for me when I rooted originally, I'm having trouble now though
Click to expand...
Click to collapse
Yep I was here aswell. Boot into driver signature mode and install the proper drivers. If you connect your device you can change the drivers. I don't have a PC next to me so I can't give you exact steps. The unbrick tool has the proper drivers, just follow the first few steps of that instruction to get it to show up as Qualcomm or something else as long as it isn't Kedacom.
Basically, I installed Havoc OS, tried flashing a couple kernels, kept getting systemui crashes, so I decided to dirty flash HavocOS again, and forgot to flash TWRP again before I exited TWRP.
Next, I boot back into my phone, opened Magisk Manager to find that Magisk is not installed, just the manager. I can't install Magisk as I have no TWRP...Which leads me to my next point, trying to boot into recovery brings me no avail as I forgot to flash TWRP. I have zero recovery right now.
Thirdly, HavocOS Suffers from the whole issue of needing SELinux set to permissive, for ADB to work...I can't do that, because I don't have Magisk/root.
Please tell me that someone has an idea here? I'd like to get TWRP back, or back to 100% stock and I can start over, or something other than a custom rom with serious SystemUI crashes and no root...
SOS!
This is not even close to a softbrick. Just boot TWRP using Fastboot and flash the zip from inside TWRP to install it. Also, there are various other solutions to fix your problem. Another one would be to simply use Deuces Recovery Script and go back to Stock.
As d-m-x stated boot twrp with fastboot boot not fastboot flash. Twrp will load into the phone then you can flash twrp and magisk.
I'd tried Fastboot already, will try again momentarily though.
D-m-x said:
This is not even close to a softbrick. Just boot TWRP using Fastboot and flash the zip from inside TWRP to install it. Also, there are various other solutions to fix your problem. Another one would be to simply use Deuces Recovery Script and go back to Stock.
Click to expand...
Click to collapse
Fastboot hasn't worked either. Unless I'm doing something wrong, but I just get "waiting for any device" despite having adb on/off, being in bootloader/fastboot mode or being booted into android, etc.
For Fastboot to work you have to be in the Bootloader Menu. How did you unlock and root your Phone in the first place? That should have taken you through those steps.
Anyways, it's likely that the computer just doesn't recognize the phone. Connect it and go into your Device Manager and see if it's properly recognized. If not install the correct USB Drivers and try again. If everything is set up correctly you can type "fastboot devices" while in the bootloader and you should see your Devices address which means it is connected and ready. Then boot TWRP as stated and install the zip from within.
D-m-x said:
For Fastboot to work you have to be in the Bootloader Menu. How did you unlock and root your Phone in the first place? That should have taken you through those steps.
Anyways, it's likely that the computer just doesn't recognize the phone. Connect it and go into your Device Manager and see if it's properly recognized. If not install the correct USB Drivers and try again. If everything is set up correctly you can type "fastboot devices" while in the bootloader and you should see your Devices address which means it is connected and ready. Then boot TWRP as stated and install the zip from within.
Click to expand...
Click to collapse
Bootloader is unlocked etc. I initially did everything using the P2XLToolskit 2.0
You're correct, I think its simply a case of the PC not recognizing the device. I've already checked device manager, and it's not properly installing the device. I've multiple times tried reinstalling the universal driver, and various other fixes. I think it relates to the whole issue of HavocOS being screwy about USB. Many people have reported issues with USB recognition issues when ADB is turned on. The consensus from how I understand it, is that ADB ON = Phone won't be recognized. ADB OFF = Device should be recognized for file/data transfer...However even with ADB off my PC is still not installing drivers properly / recognizing the device.
The Device Manager lists my device as "Unknown USB Device (Device Descriptor Request Failed)"
Also tried:
1. Go to C:\Windows\INF
2. Find the file "wpdmtp.inf"
3. Right click the file and click 'Install'
4. Once that is done, simply plug your phone and it should work.
^ did not work.
Dragostini said:
Bootloader is unlocked etc. I initially did everything using the P2XLToolskit 2.0
You're correct, I think its simply a case of the PC not recognizing the device. I've already checked device manager, and it's not properly installing the device. I've multiple times tried reinstalling the universal driver, and various other fixes. I think it relates to the whole issue of HavocOS being screwy about USB. Many people have reported issues with USB recognition issues when ADB is turned on. The consensus from how I understand it, is that ADB ON = Phone won't be recognized. ADB OFF = Device should be recognized for file/data transfer...However even with ADB off my PC is still not installing drivers properly / recognizing the device.
The Device Manager lists my device as "Unknown USB Device (Device Descriptor Request Failed)"
Also tried:
1. Go to C:\Windows\INF
2. Find the file "wpdmtp.inf"
3. Right click the file and click 'Install'
4. Once that is done, simply plug your phone and it should work.
^ did not work.
Click to expand...
Click to collapse
Have you tried different USB A to USB C cables and ports?
Dragostini said:
Bootloader is unlocked etc. I initially did everything using the P2XLToolskit 2.0
You're correct, I think its simply a case of the PC not recognizing the device. I've already checked device manager, and it's not properly installing the device. I've multiple times tried reinstalling the universal driver, and various other fixes. I think it relates to the whole issue of HavocOS being screwy about USB. Many people have reported issues with USB recognition issues when ADB is turned on. The consensus from how I understand it, is that ADB ON = Phone won't be recognized. ADB OFF = Device should be recognized for file/data transfer...However even with ADB off my PC is still not installing drivers properly / recognizing the device.
The Device Manager lists my device as "Unknown USB Device (Device Descriptor Request Failed)"
Also tried:
1. Go to C:\Windows\INF
2. Find the file "wpdmtp.inf"
3. Right click the file and click 'Install'
4. Once that is done, simply plug your phone and it should work.
^ did not work.
Click to expand...
Click to collapse
Try these troubleshooting steps:
- make sure you're running the LATEST SDK Tools
- Try diff USB cables (switch from 2.0 to 3.0, or vice versa)
- Try a diff USB port
- Make sure you're in the proper fastboot folder with the fastboot application
- Boot into bootloader type fastboot devices see if you get a serial number
In my sig is a link for troubleshooting, and step by step that includes links to get latest SDK Tools.
If all else fails, I'd reco a fresh factory image install and get back to your cust Rom from there, rather than spend a day or two chasing ghosts.
Good luck!
Az Biker said:
Try these troubleshooting steps:
- make sure you're running the LATEST SDK Tools
- Try diff USB cables (switch from 2.0 to 3.0, or vice versa)
- Try a diff USB port
- Make sure you're in the proper fastboot folder with the fastboot application
- Boot into bootloader type fastboot devices see if you get a serial number
In my sig is a link for troubleshooting, and step by step that includes links to get latest SDK Tools.
If all else fails, I'd reco a fresh factory image install and get back to your cust Rom from there, rather than spend a day or two chasing ghosts.
Good luck!
Click to expand...
Click to collapse
Spoke with Google; getting the phone RMA. Blatantly told the guy it was rooted previously, bootloader unlocked, and running a custom ROM. He said it didn't matter. I will report back on this thread once I have new phone in hand, just to confirm all went well.
Reporting back.
Brought phone to virgin mobile, obviously still heavily modified.
Was given a loaner phone. Signed a paper saying I'd pay 150 for the loaner if it broke. Broke loaner screen same day.
Just picked up a brand new pixel 2 xl they shipped (phone only) because mine was considered unrepairable. I was charged 169 for the loaner phone, to my account with virgin. No cash transaction.
All in all, they honoured googles view of not minding the modifications so long as it's an issue they don't feel is related.
Cheers.
Hi there. Sorry if I sound dumb. I'm new to this whole thing and this was supposed to be my first experience with flashing custom ROMs and stuff like that. I was planning to get ready to install LineageOS on my Nexus 7 using a Windows 10 PC. Unfortunately, things quickly went south.
My first roadblock was the tablet not being recognised by fastboot. I checked online for a bit and from what I could gather, the solution was to install the Google USB drivers using device manager. I went into device manager, right clicked my Nexus 7 in "portable devices", selected "update driver" and chose the Google USB driver I downloaded from the official Android developers website. I'm not sure if this is relevant but the tablet was in fastboot mode when I did this. From that point on, my tablet is no longer recognised and it just keeps saying "device descriptor request failed" whether it's in fastboot or normal mode, and regardless of which USB mode I choose.
I tried uninstalling the driver, factory resetting, WugFresh NRT, and using different cables and USB ports. I checked for all sorts of solutions but they either didn't help or they require an unlocked bootloader (which was the very first thing I tried to do before finding out I needed to install the driver for fastboot to recognise the Nexus 7). Does anyone here know of a solution to get this working again? I'm completely stumped on what to do.
EDIT: I tested with a Chromebook and an old Windows 7 PC I had lying around. Neither could detect my Nexus 7 and the W7 PC even said it failed to install the driver as soon as I plugged it in. It seems that the driver update screwed up my tablet somehow and I have no idea how to fix it. I really don't understand how this could have happened considering I followed Google's own instructions for updating the driver.
Does anyone perhaps have a copy of the OEM driver for the 2013 N7 Wi-Fi (flo) model? ASUS don't distribute the driver on their website anymore and I'm out of ideas.
BenSkylake said:
my tablet is no longer recognised and it just keeps saying "device descriptor request failed" whether it's in fastboot or normal mode
Click to expand...
Click to collapse
Review this thread and the solutions.
After you have fixed it, you can easily install a new custom ROM with two steps:
RESTOCK - installs USB drivers and unlocks it, latest official stock ROM
CROSS - various custom ROMs, 1-click installation, TWRP, incl root
k23m said:
Review this thread and the solutions.
After you have fixed it, you can easily install a new custom ROM with two steps:
RESTOCK - installs USB drivers and unlocks it, latest official stock ROM
CROSS - various custom ROMs, 1-click installation, TWRP, incl root
Click to expand...
Click to collapse
Thanks for the response. I don't think I'll have enough time to try this today but I might as well ask. Do any of these fixes work without needing a USB connection to a PC, or if they do, do they require adb and fastboot to work? Because if so, I won't be able to use them since my USB data connectivity is completely busted no matter what I plug my Nexus into.
k23m said:
Review this thread and the solutions.
After you have fixed it, you can easily install a new custom ROM with two steps:
RESTOCK - installs USB drivers and unlocks it, latest official stock ROM
CROSS - various custom ROMs, 1-click installation, TWRP, incl root
Click to expand...
Click to collapse
I just ran the RESTOCK 1 script and it worked wonders! My tablet's USB connectivity has been fixed and as an added bonus, my bootloader is now unlocked. I'll be continuing the process in Linux on my Pixelbook since it doesn't require any driver installations as far as I know. Thank you so much! You're a life saver!