Related
So I have an Att Note 2, which is bricked or soft bricked. I am a very rookie Android guy when it comes to modifying or hacking. I did root my Note 2 with Cyanogenmod. However, I missed S Note and the use of my S Pen so I researched a bit to get back to stock with the use of Odin and stock roms found on the net. I was successful, and actually amazed it worked. Long story short, a few days after that, an OTA update hit my phone, didn't even think about it and began the download. The phone downloaded the update, and rebooted to complete the install. The problem is, during reboot, the phone got stuck on the "Samsung Galaxy Note II" screen. I researched a bit online, and everyone said get to recovery mode and do a few things. Problem is, I can't get into recovery mode, I can only get the screen described above, and the download screen, THAT IS ALL. Looked a bit more online and attempted to flash various stock roms with Odin. Some were successful, Odin passed, and the phone would get stuck on the Note II screen again, and would not boot into recovery mode, same issue with only being able to access download mode. The unsuccessful flash attempts got me to screen informing me that Kies needs to be used to update my firmware. Kies showed a recovery code, which was downloaded, but unsuccessful. It would download all the way, but at the end of install, it would fail. Funny thing is it would work enough to get me back to the ability to get into download mode. I just want my Note 2 working again. Is there any way to wipe my phone completely clean, and start over? Or is there any way to even re-root it, or flash any sort of rom on there, just so I can use the damn thing? I need some help by you pros out there ! Please!
titostats said:
So I have an Att Note 2, which is bricked or soft bricked. I am a very rookie Android guy when it comes to modifying or hacking. I did root my Note 2 with Cyanogenmod. However, I missed S Note and the use of my S Pen so I researched a bit to get back to stock with the use of Odin and stock roms found on the net. I was successful, and actually amazed it worked. Long story short, a few days after that, an OTA update hit my phone, didn't even think about it and began the download. The phone downloaded the update, and rebooted to complete the install. The problem is, during reboot, the phone got stuck on the "Samsung Galaxy Note II" screen. I researched a bit online, and everyone said get to recovery mode and do a few things. Problem is, I can't get into recovery mode, I can only get the screen described above, and the download screen, THAT IS ALL. Looked a bit more online and attempted to flash various stock roms with Odin. Some were successful, Odin passed, and the phone would get stuck on the Note II screen again, and would not boot into recovery mode, same issue with only being able to access download mode. The unsuccessful flash attempts got me to screen informing me that Kies needs to be used to update my firmware. Kies showed a recovery code, which was downloaded, but unsuccessful. It would download all the way, but at the end of install, it would fail. Funny thing is it would work enough to get me back to the ability to get into download mode. I just want my Note 2 working again. Is there any way to wipe my phone completely clean, and start over? Or is there any way to even re-root it, or flash any sort of rom on there, just so I can use the damn thing? I need some help by you pros out there ! Please!
Click to expand...
Click to collapse
Download the latest kies from the samsung website.. and then open tools and then firmware update and initialization.. pull out the battery and type the model number and serial number kies asks.. follow the instructions.. your phone will be fine..
Sent from my GT-N7100
titostats said:
So I have an Att Note 2, which is bricked or soft bricked. I am a very rookie Android guy when it comes to modifying or hacking. I did root my Note 2 with Cyanogenmod. However, I missed S Note and the use of my S Pen so I researched a bit to get back to stock with the use of Odin and stock roms found on the net. I was successful, and actually amazed it worked. Long story short, a few days after that, an OTA update hit my phone, didn't even think about it and began the download. The phone downloaded the update, and rebooted to complete the install. The problem is, during reboot, the phone got stuck on the "Samsung Galaxy Note II" screen. I researched a bit online, and everyone said get to recovery mode and do a few things. Problem is, I can't get into recovery mode, I can only get the screen described above, and the download screen, THAT IS ALL. Looked a bit more online and attempted to flash various stock roms with Odin. Some were successful, Odin passed, and the phone would get stuck on the Note II screen again, and would not boot into recovery mode, same issue with only being able to access download mode. The unsuccessful flash attempts got me to screen informing me that Kies needs to be used to update my firmware. Kies showed a recovery code, which was downloaded, but unsuccessful. It would download all the way, but at the end of install, it would fail. Funny thing is it would work enough to get me back to the ability to get into download mode. I just want my Note 2 working again. Is there any way to wipe my phone completely clean, and start over? Or is there any way to even re-root it, or flash any sort of rom on there, just so I can use the damn thing? I need some help by you pros out there ! Please!
Click to expand...
Click to collapse
Try flashing a recovery for ur device with Odin, not a ROM, just flash twrp recovery with Odin, after u flash the recovery u will be able to access recovery and flash a stock ROM through twrp. I think what happened to u is when u flashed the update it tried to right over the unlocked bootloader which caused the soft brick, try flashing the recovery for ur device and if that doesn't work try the above posters way...
Sent from my Nexus 5 using XDA Premium 4 mobile app
Does anyone else get an error with Kies 3? when I connect my Edge Kies gives me an error! I want to perform a device recovery via Kies that's my last hope. I tried to root my Edge and now I'm stuck with a bricked phone and yes I have tried Odin 3.10.6 and regular s6 Auto Root from Chainfire as well. nothing works for me, I've looked everywhere to find the G925t firmware but no luck again. I'm really screwed.:crying:
Same
I'm guessing kies wont recognize it til after 4/10 since technically nobody is supposed to have it yet. Just a guess though.
dcmtnbkr said:
I'm guessing kies wont recognize it til after 4/10 since technically nobody is supposed to have it yet. Just a guess though.
Click to expand...
Click to collapse
same issue here. Had to use smart switch which is not as efficient from my old galaxy to the new one. Transfer stopped and had to restart 2nd time which did seem to complete.
Helium is much better for transferring data to new phone..
Same issue here. New Galaxy S6 and Kies 3 won't allow it: Unsupported device alert. WFT?
acana79 said:
Same issue here. New Galaxy S6 and Kies 3 won't allow it: Unsupported device alert. WFT?
Click to expand...
Click to collapse
Do the following: open Kies, click on tools, Firmware upgrade and initialisation, enter your model number and serial number and let it download the firmware, after an hour or so depending on your connection speed the firmware will be downloaded and your phone will reboot into recovery to install the firmware. done
Use Samsung Smart Switch instead. It has replaced Kies for the newer phones.
Here is my video showing it being used to flash Stock Firmware to the Edge.
http://forum.xda-developers.com/tmo...p/flash-stock-firmware-using-samsung-t3079176
Supersport, I have a SM-G900A (Galaxy S5 ATT) and Kies 3 and Smart Switch says it is an unsupported device. I got to the part to enter the model and serial and it comes up unsupported again. I tried a different USB cable and also tried Smart Switch on a Mac. The white USB3 Samsung cable does not allow the phone to be recognized by the Mac so I used an old USB2 cable and it hangs on "connecting to your device".
I tried downgrading to Android 4.4.2 so I could root it and it is in the "firmware encountered an issue" screen with the yellow triangle. Ack!
Boysterload said:
Supersport, I have a SM-G900A (Galaxy S5 ATT) and Kies 3 and Smart Switch says it is an unsupported device. I got to the part to enter the model and serial and it comes up unsupported again. I tried a different USB cable and also tried Smart Switch on a Mac. The white USB3 Samsung cable does not allow the phone to be recognized by the Mac so I used an old USB2 cable and it hangs on "connecting to your device".
I tried downgrading to Android 4.4.2 so I could root it and it is in the "firmware encountered an issue" screen with the yellow triangle. Ack!
Click to expand...
Click to collapse
It sounds like the MAC had issues with installing the driver. I'm not positive if your model is supported by Smart Switch yet, but I would suggest using Smart Switch as KIES has stopped official support for most of the newer models. If it's not supported yet, it should be soon. They keep adding devices. When I got my S6 Edge, it took about a week for it to be supported, but that's when Smart Switch had just come out too. Wish I was more help.
Anyone else have success getting this model to flash???
Bootloop
I initially used odin to flash OI1 update, after a rom I was using caused problems and I got bootloop. It changed bootloader value to b:3 and I'm unable to downgrade now so I used smart switch which didn't recognize device so used emergency recovery and still bootloop. I have factory reset and wipe cache multiple times along with adb side load and individual flashes of bootloader, modem, kernel, flashed custom kernel and twrp to access fix permissions and to mount partitions with advanced wipe etc and still wont boot past logo. Also during one fix attempt phone said can't mount system.. Idk I'm not understanding where the problem is .everything says successful but I'm still in bootloop. Please help. I've spent hours everyday for the past week searching & trying different things that seem might help so open to any suggestions.
I seem to be having the same issue. Tried to manually update my phone via Odin but nothing has worked so far.... Now I just get an error on my phone that says
"An error has occured while updating the device software. Use the Emergency recovery function in the Smart Switch PC software."
What am I missing here?? It's a Samsung phone, and it's been around for over a year (S6 Edge T-Mobile)...
ieatcalcium said:
I seem to be having the same issue. Tried to manually update my phone via Odin but nothing has worked so far.... Now I just get an error on my phone that says
"An error has occured while updating the device software. Use the Emergency recovery function in the Smart Switch PC software."
What am I missing here?? It's a Samsung phone, and it's been around for over a year (S6 Edge T-Mobile)...
Click to expand...
Click to collapse
If nothing else is working, you can try this for the T-Mobile S6 Edge. ONLY the T-Mobile S6 Edge is supported, so PLEASE verify it's the correct one.
https://mega.nz/#!H0hz2AQJ!iDzw_SwCL7qpJnZ8Y_8EDSrSgvAHK_hT93igXHOlm3A
It's a known working version of Odin, the Samsung Driver Package, and Firmware. Place your phone into Download Mode before using.
If any issues, let me know and we'll work through them.
SuperSport said:
If nothing else is working, you can try this for the T-Mobile S6 Edge. ONLY the T-Mobile S6 Edge is supported, so PLEASE verify it's the correct one.
It's a known working version of Odin, the Samsung Driver Package, and Firmware. Place your phone into Download Mode before using.
If any issues, let me know and we'll work through them.
Click to expand...
Click to collapse
No worries, I got it working! Thank you!
SOLUTION FOR ANYONE HAVING ISSUES STILL
1. Make sure you have Samsung Smart Switch Downloaded
2. Make sure Smart Switch is updated.
3. Click "more" across the top
4. Click "Emergency software recovery and initialization"
5. Click "Device initialization" across the top
6. In the model name box, type in exactly your model number. It is case sensitive. (for me, it was located on the back of my phone on the bottom named "SM-G925T)
7. It will then ask you for your serial number which can be found by holding POWER, HOME, and VOLUME DOWN
8. PROFIT$$$$$$$
Will this wipe the data like recorded audio and video files? This phone belongs to a friend with cancer and I'm trying to unload message he recorded for his family. I need to recover the data first and foremost and then getting the phone operation is secondary. I've got conflicting reports of what a firmware flash will do to recorded media files. I'm hoping the SDcard area will be unaffected but I need to know beyond a shadow of a doubt before I do anything.
Yes it will, it will behave like a factory reset. It will ask you to backup your storage content if it recognizes your phone you may be able to fix it.
Pp.
samanbabah said:
Do the following: open Kies, click on tools, Firmware upgrade and initialisation, enter your model number and serial number and let it download the firmware, after an hour or so depending on your connection speed the firmware will be downloaded and your phone will reboot into recovery to install the firmware. done
Click to expand...
Click to collapse
Thank you so f much!! I avoided waiting 8+ hours to download just the firmware. This method took less than half an hour!
*I dont know if doing something against the rules for replying to this really old thread but I am just thankful for this easy, simple method; I miss using the spen
Hey,
after my Tab 3 10.1 (P5200) got the KitKat update not so long ago, it went to an kinda unusable state, due to the cant write on External SD Card thingy.
So yesterday after checking out my options (Root or Update to Android 5) I decided to go for the root, since the Android 5 version is supposed to be a bit buggy.
Anyway, after my initial Odin try the tablet stuck at the "Galaxy Tab 3" logo, I think it was due to having a slightly different version than the root file was for.
So after that failed, I downloaded my stock firmware (P5200XXUBOB1_P5200DBTBOB1_P5200XXUBNK1) and also used Odin, which resulted in my tablet starting flawless again. But since it was the stock version, unrooted again, which is again, an unusable state.
So I went with this (http://forum.xda-developers.com/gal...-10/rom-100-stock-4-4-2-kitkat-p5200-t2866066) thread, and tried the rooted version, put it in the root of my SD Card and installed it per recovery menu, which "worked" but got me stuck on the Samsung logo (side note: The music clip that playes when the logo gets outlined by the blue circle does not play completly, the last few moments are cut), after waiting for quite some time I thought I just go back to odin and install the stock firmware again. Sadly this only got me to the Samsung logo again.
Now I tried quite a few things...
I installed another stock version (Instead of the german one, i used one from luxembourgh)
I tried to install 4.2.2 again
The last thing I tried was to install the recovery menu from here (http://forum.xda-developers.com/showthread.php?t=2442915), so here is something that could be interessting. I tried to do a Factory reset before trying to reinstall the stock firmware, which worked only partially, I could not mount /config, which he wanted to do to delete it I guess.
When I tried to manually mount /config it would also fail. (Not sure if thats relevant, but its the only thing that did not worked as expected)
So, everything I tried, with factory reset and stuff ended in a stuck at the Samsung logo. In one case (not sure what combination of stuff) I got in the bootloop (Galaxy Tab 3 -> Restart -> Galaxy Tab 3 -> Restart), in a rare case I just got stuck at Galaxy Tab 3, and in most of the cases I got stuck at Samsung logo (Start -> Galaxy Tab 3 -> Samsung).
So I hope somebody can help me, since Id rather not buy a new tablet only because google thought it was a cool idea to prevent apps from writing on ext SD Card, and me ****ing something up in the flash process.
My Tablet is a Galaxy Tab 3 10.1 (GT-P5200) and at the moment with the 4.4.2 build "P5200XXUBOB1_P5200DBTBOB1_P5200XXUBNK1" (atleast thats the filename of the stock firmware im using, downloaded from http://www.sammobile.com/firmwares/download/43847/P5200XXUBOB1_P5200DBTBOB1_DBT/), I used Odin 3.07 and Odin 3.09.
I can access the Odin/Download mode, the build in recovery mode, and could use the TWRP recovery mode if I were to install it with Odin.
I still didnt solve it, every help would be greatly appreciated, I really dont want a paper weight in tablet format
Bump
Hi,
I have Galaxy S4 Mini VE GT-i9195i. The phone was a bit laggy, so I decided to factory reset. When I did it, the phone didn't booted. It was showing Odin download screen with red text "Could not do normal boot, odin mode" (or something like that). In thread [index] Galaxy S4 mini i9195i were some recoveries, so I used odin to recovery it. Now, when booting, it shows "Kernel is not seandroid reinforcing, set warranty bit:kernel" and when it boots up, there is setup screen (the one which shows when you firt turn the phone on), but the phone is spamming with message boxes "<random process or app> stopped working", so I can't do anything(by fast taping OK, I manage to get through few screens, but when it come's Google account choose, the screen goes black).
I tried another recovery, but none of them worked.
In the forum, there is also link to stock ROM, I think wiping all the data and flashing the phone with stock ROM could help, but last time I did something like this was about 5 years ago with Xperia, and I couldn't find any guide how to do this, so could you guys please tell me what to do?
Thanks.
adamjezek98 said:
Hi,
I have Galaxy S4 Mini VE GT-i9195i. The phone was a bit laggy, so I decided to factory reset. When I did it, the phone didn't booted. It was showing Odin download screen with red text "Could not do normal boot, odin mode" (or something like that). In thread [index] Galaxy S4 mini i9195i were some recoveries, so I used odin to recovery it. Now, when booting, it shows "Kernel is not seandroid reinforcing, set warranty bit:kernel" and when it boots up, there is setup screen (the one which shows when you firt turn the phone on), but the phone is spamming with message boxes "<random process or app> stopped working", so I can't do anything(by fast taping OK, I manage to get through few screens, but when it come's Google account choose, the screen goes black).
I tried another recovery, but none of them worked.
In the forum, there is also link to stock ROM, I think wiping all the data and flashing the phone with stock ROM could help, but last time I did something like this was about 5 years ago with Xperia, and I couldn't find any guide how to do this, so could you guys please tell me what to do?
Thanks.
Click to expand...
Click to collapse
Sorry to hear about your situation. I think flashing the stock rom is the last best option. Anyways here r the steps:
1. Download Odin 3.1x.x version( its the program via which you can flash samsung stock roms, modems,recoveries and caches etc,...google it)
2.If possible, before doing anything to your phone, take a nandroid backup from recovery like TWRP or CWM)
3.Hold power+home+volume down button to boot into bootloader menu. Once booted, it will ask you to press volume up button to continue, do that.
4.Now connect your phone to your pc via data cable( kindly confirm that your pc usb ports are working properly otherwise the flashing will corrupt)
5. Open Odin. If connected properly, you will see the ID:COM tab turn blue mentioning the port name you connected.Now click AP on right hand side and search /select the location where your Stock rom(md5) file is located. Now on left side panel(logs) you will see something is going on. Wait for a few minitues and after processing is done (when you see the lines "leave cs...") Click start and relax.
6.It will take some time to flash the rom. If everything went well, there will be a "PASS" message on top left of Odin. The phone will boot into recovery and do some cleaning and reboot again.......................................................Congratulations!!
Note: I follow this method on GT-9192 and i think its same with your model.
I think the message "Kernel is not seandroid reinforcing" means incompatible recovery software for this device. Try different one.
The only working recovery for our phone is TWRP recovery. Flash the .img through flashify after rooting with Kingroot / Supersu me and you are done . Be sure to flash the stock rom through odin to fix any hiccups with app not responding and after proceed normally.
I have a Galaxy Tab3 7.0 SM-T210 that we've owned for a long time, but I now want to use it for more things and find it a little clunky and slow compared to our more up to date smart phones. So i wanted to flash with a newer version of Android, but the tablet now appears to be bricked showing the "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again" screen and it won't do anything else. It won't enter download mode or recovery mode.
I came across these instructions to take me from a stock tab, and upgrade to Android 9.0 theupgradeguide.com/2019/09/17/install-android-9-0-pie-on-samsung-galaxy-tab-3-7-0-lineageos-16-how-to-guide
I loaded TWRP successfully using Odin and was able to set up a Nandroid backup. I then moved on to part 5 to perform a factory reset of the device, which was successful. This is where it started to go wrong though! I chose the reboot option after the wipe, rather than as per the instructions going back to the TWRP main menu. The tab rebooted and would't get past the Samsung logo. It went back in to download mode when I tried, and then tried to flash with a stock version of KitKat Android. Odin recognised the tab connected, it accepted the .tar flash file, and the tab showed the progress bar showing the download happening. Then Odin failed after a few minutes, and then the firmware upgrade failure error message appeared.
After lots of internet searching I've tried the following:
1. Putting it in download mode, doesn't work!
2. Putting it in recovery mode, doesn't work!
3. Connecting it to Kies, device not recognised and latest version of Kies doesn't have the option to manually select your device to reload the firmware!
4. Tried using ADB, device isn't recognised!
So i'm at a loss what to do to fix it, can anyone help?!
I was just trying to do the same yesterday. It all went fine with backing up and wiping, but TWRP didnt accept the image I downloaded.
It is so sad to have a capable hardware limited due lack of manufacturer care (not even saying updates, because they updated the android version at the time, but lack of optimization and how my tablet became sluggish, gave me disgust of any samsung branded device).
Can't you get to TWRP screen anymore?
If you can get to Odin download mode, trying reflashing Odin (perhaps a different version).