Develop Bugs

[ROM] [LINARO] CyanogenMod 10.2 for Xiaomi Redmi 1S (armani)

Status: Not Bootable
If possible, please provide logcat so I can investigate!
Hi everyone, I compiled CyanogenMod 10.2 (JellyBean 4.3) for armani
The reason I built this ROM is because I couldn't find a "AOSP-ish" JellyBean ROM for armani.
It should be stable as it uses proprietary binaries from the stock ROM & official Xiaomi Kernel sources. But I can't guarantee.
The build is based on the stable branch of CyanogenMod 10.2.
ROM is compiled with Linaro 4.8 and Kernel is compiled with Linaro 4.9 for maximum smoothness.
Please test and report problems as I don't have this device. I will try and find a solution if things are broken.
Hence why I said I can't guarantee how stable it is because this is UNTESTED
Flash at your own risk!!
ROM may be UNROOTED because the target build is user (instead of userdebug), so DO NOT FORGET TO FLASH SUPERSU zip
Instructions:
0. Make sure that you have a custom recovery (I highly recommend TWRP)
1. Wipe Data
2. Flash the ROM
3. Flash Gapps
4. (optional) Flash SuperSU if you want root
5. Enjoy
Download
Download from d-h.st
Gapps
Mirror 1
Mirror 2
Mirror 3
SuperSU
http://download.chainfire.eu/supersu
FAQ
Why is it unrooted?
Because the target build is 'user' instead of 'userdebug'. 'user' disables few debugging modules and it will improve performance a bit.
Kernel Source:
https://github.com/MiCode/Xiaomi_Kernel_OpenSource/tree/armani-jb-oss
Device Tree:
https://github.com/armani-dev/android_device_xiaomi_armani/tree/cm-10.2
Blobs:
https://github.com/armani-dev/proprietary_vendor_xiaomi/tree/cm-10.2

Reserved

great i test and report my feedback BOOOTLOOOP

Stuck at MI logo..

striplex said:
great i test and report my feedback BOOOTLOOOP
Click to expand...
Click to collapse
Jayanttyagi said:
Stuck at MI logo..
Click to expand...
Click to collapse
How long you guys been waiting?
Could you guys provide a logcat?
Sorry for the inconvenience, I don't have the device right now.

couple of minutes and I don't have the rom now.. deleted it after trying 3 times.. i flashed rom+gapps+supersu at first.. then rom+gapps and then again only rom at last try.. so it's definitely the rom..

Jayanttyagi said:
couple of minutes and I don't have the rom now.. deleted it after trying 3 times.. i flashed rom+gapps+supersu at first.. then rom+gapps and then again only rom at last try.. so it's definitely the rom..
Click to expand...
Click to collapse
I'm sorry, thanks for trying.
Anyone willing to give me a logcat if possible?

Sorry i m a noob , how can i give you a logcat ?
I install first rom than gapp, after only rom but in same case bootloop.
I use on linux adb command "adb logcat" when the terminal in bootloop but in the terminal there is :"waiting for devices "
Sorry for my bad english.

I guess it means the kernel failed to boot.
Something's wrong.. I've built ROM twice for Nexus 4 and Xperia L but never had this problem..
Unfortunately I will be out of town this weekend so I can only continue working on this ROM on Wednesday.
If anyone knows what the problem is please PM me or reply to this thread.
DL link will be kept alive so people can continue investigating.

KcLKcL said:
Status: Not Bootable
If possible, please provide logcat so I can investigate!
Hi everyone, I compiled CyanogenMod 10.2 (JellyBean 4.3) for armani
The reason I built this ROM is because I couldn't find a "AOSP-ish" JellyBean ROM for armani.
It should be stable as it uses proprietary binaries from the stock ROM & official Xiaomi Kernel sources. But I can't guarantee.
The build is based on the stable branch of CyanogenMod 10.2.
ROM is compiled with Linaro 4.8 and Kernel is compiled with Linaro 4.9 for maximum smoothness.
Please test and report problems as I don't have this device. I will try and find a solution if things are broken.
Hence why I said I can't guarantee how stable it is because this is UNTESTED
Flash at your own risk!!
ROM may be UNROOTED because the target build is user (instead of userdebug), so DO NOT FORGET TO FLASH SUPERSU zip
Instructions:
0. Make sure that you have a custom recovery (I highly recommend TWRP)
1. Wipe Data
2. Flash the ROM
3. Flash Gapps
4. (optional) Flash SuperSU if you want root
5. Enjoy
Download
Download from d-h.st
Gapps
Mirror 1
Mirror 2
Mirror 3
SuperSU
http://download.chainfire.eu/supersu
FAQ
Why is it unrooted?
Because the target build is 'user' instead of 'userdebug'. 'user' disables few debugging modules and it will improve performance a bit.
Kernel Source:
https://github.com/MiCode/Xiaomi_Kernel_OpenSource/tree/armani-jb-oss
Device Tree:
https://github.com/armani-dev/android_device_xiaomi_armani/tree/cm-10.2
Blobs:
https://github.com/armani-dev/proprietary_vendor_xiaomi/tree/cm-10.2
Click to expand...
Click to collapse
Hay guy please make this build bootable for us cause you only give cm 10 on our redmi 1s .:crying:

niral.naik said:
Hay guy please make this build bootable for us cause you only give cm 10 on our redmi 1s .:crying:[
why do you want 2 year old cm10 when there is cm13 available ?
Click to expand...
Click to collapse

smustafasms said:
niral.naik said:
Hay guy please make this build bootable for us cause you only give cm 10 on our redmi 1s .:crying:[
why do you want 2 year old cm10 when there is cm13 available ?
Click to expand...
Click to collapse
Sir I am also junior 15 yes old developer and new in XDA .I am running cm 13 mokee in redmi 1s but I love old android version like doubt cupcake froyo but those can not be compiled by redmi 1s. I tried to make my own build of cm 10.1 for my redmi (reason to try jelly bean and become famous + senior Dev on xda ) I have no previous experience so I made a big brick and bootloop in redmi 1s . I want to learn what is my Build's bug . so I need working source from you sir . Thanks.
Click to expand...
Click to collapse

niral.naik said:
smustafasms said:
Sir I am also junior 15 yes old developer and new in XDA .I am running cm 13 mokee in redmi 1s but I love old android version like doubt cupcake froyo but those can not be compiled by redmi 1s. I tried to make my own build of cm 10.1 for my redmi (reason to try jelly bean and become famous + senior Dev on xda ) I have no previous experience so I made a big brick and bootloop in redmi 1s . I want to learn what is my Build's bug . so I need working source from you sir . Thanks.
Click to expand...
Click to collapse
My friend CM11(kitkat) is faster than previous jellybean version. whats the use of using old builds with less security and apps are too mentioning kitkat & above as requirements. I have been using android since the days of doughnut, eclair, froyo, gingerbread, icecream sandwich as android os. nothing beats kitkat in smoothness and app stability. Try your mind to focus on new builds instead of old ones bro
Click to expand...
Click to collapse

why to use jb when u have mm ?? n jb is not safe regarding security as well!!!

Sir I think this could be a good rom in dualboot with others or as a primary daily driver or (it's my best thought about this rom) as multimedia rom because the MIUI V5 has the best camera and audio performances so there would be the possibility to port camera libs and app from MIUIV5v56 global(latest stable global MIUI V5 build going by what I know) and music libs and apps and also mixer_paths.xml and other audio related files,who agree?!

Dr. Joy Das said:
niral.naik said:
My friend CM11(kitkat) is faster than previous jellybean version. whats the use of using old builds with less security and apps are too mentioning kitkat & above as requirements. I have been using android since the days of doughnut, eclair, froyo, gingerbread, icecream sandwich as android os. nothing beats kitkat in smoothness and app stability. Try your mind to focus on new builds instead of old ones bro
Click to expand...
Click to collapse
Agree. Kitkat is still the best Android OS till now.
Click to expand...
Click to collapse

Instead , i l suggest you to continnue development of cm11, or 12.1, adding security patches, implementing caf changes etc etc..

Dr. Joy Das said:
niral.naik said:
My friend CM11(kitkat) is faster than previous jellybean version. whats the use of using old builds with less security and apps are too mentioning kitkat & above as requirements. I have been using android since the days of doughnut, eclair, froyo, gingerbread, icecream sandwich as android os. nothing beats kitkat in smoothness and app stability. Try your mind to focus on new builds instead of old ones bro
Click to expand...
Click to collapse
Yeah I am focusing for cm14 android N project .
Thanks for your advice sir.
Click to expand...
Click to collapse

[ROM][UNOFFICIAL][6.0][GEEHRC] LIQUIDSMOOTH V6 Monthly

This is my build of LiquidSmooth V6 rom for our lovely Optimus G [MM6.0] Working on E975 F180
No More Updates Sorry E970 Users LiquidSMooth Has Ben Abandoned From devs.. Follow My unofficial CM ..
Downloads:
Gapps
GEEHRC MM 6.0.0 V2
Older Build:
GEEHRC LP 5.11
GEEHRC MM 6.0.0 V1
Flashing instuctions:
Download the Rom
Download Gapps
Download TWRP from here
Make full wipe
Flash the ROM zip & Gapps
Enjoy
PS:
- First Boot Can Take Up to 5-7Mins
-If Sensors don't work:
Boot into recovery
Make full wipe
Install any other gee rom (e.g. Axxion)
Reboot (use rom for a while)
Back to your recovery
Make full wipe again
Install the ROM and GAPPS
Bugs:
No hardware lights
& waiting for you'r reviews and reports ^^
SOURCES:
Device: https://github.com/ChiKaLiO/android_device_lge_geehrc
Kernel: https://github.com/ChiKaLiO/android_kernel_lge_gee
THANKS TO:
@dad11 For His Help & Instuctions & Device Tree
@Kevinjoa For Making this Happen..
All Optimus G Devloppers
Screenshots:
XDA:DevDB Information
UNOFFICIAL LIQUIDSMOOTH V6 Monthly, ROM for the LG Optimus G
Contributors
ChiKaLiO
Source Code: https://github.com/LiquidSmooth/android
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.4.x
Based On: AOSP
Version Information
Status: Test
Beta Release Date: 2015-11-16
Created 2015-11-16
Uptaded 2015-12-14

First impressions: good rom! Super fast and feels solid! But I can't use it as I can't receive calls which I need.
Also:
- No NFC
- No hardware lights
I personally would prefer the option to diable hardware lights and keys and enable the android function keys. Keep up the good work for our phone

x_justin said:
First impressions: good rom! Super fast and feels solid! But I can't use it as I can't receive calls which I need.
Also:
- No NFC
- No hardware lights
I personally would prefer the option to diable hardware lights and keys and enable the android function keys. Keep up the good work for our phone
Click to expand...
Click to collapse
ty it will be fixed soon :*

hey man just wanna noe that after compiling while flashing mm6.0 ls rom does it say that unable to unmont system coz it says in mine installation successful.but due to thisit doesnot boot up... can u suggest something.

Unmount it manually
Sent from my LG-E975 using Tapatalk

Update <3
ChiKaLiO said:
This is my build of LiquidSmooth V6 rom for our lovely Optimus G [MM6.0] Working onE975 F180
Downloads:
Gapps
GEEHRC MM 6.0.0 V2
Older Build:
GEEHRC LP 5.11
GEEHRC MM 6.0.0 V1
Flashing instuctions:
Download the Rom
Download Gapps
Download TWRP from here
Make full wipe
Flash the ROM zip & Gapps
Enjoy
PS:
- First Boot Can Take Up to 5-7Mins
-If Sensors don't work:
Boot into recovery
Make full wipe
Install any other gee rom (e.g. Axxion)
Reboot (use rom for a while)
Back to your recovery
Make full wipe again
Install the ROM and GAPPS
Bugs:
No hardware lights
& waiting for you'r reviews and reports ^^
SOURCES:
Device: https://github.com/ChiKaLiO/android_device_lge_geehrc
Kernel: https://github.com/ChiKaLiO/android_kernel_lge_gee
THANKS TO:
@dad11 For His Help & Instuctions & Device Tree
@Kevinjoa For Making this Happen..
All Optimus G Devloppers
Screenshots:
XDA:DevDB Information
UNOFFICIAL LIQUIDSMOOTH V6 Monthly, ROM for the LG Optimus G
Contributors
ChiKaLiO
Source Code: https://github.com/LiquidSmooth/android
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.4.x
Based On: AOSP
Version Information
Status: Test
Beta Release Date: 2015-11-16
Created 2015-11-16
Uptaded 2015-12-14
Click to expand...
Click to collapse
Ready for daily use no bugs for now smooth and really good battery & doze mod...

ChiKaLiO said:
Ready for daily use no bugs for now smooth and really good battery & doze mod...
Click to expand...
Click to collapse
Will you support e970?

Chum.zuizui said:
Will you support e970?
Click to expand...
Click to collapse
es in the future ..

i'm gonna try this on my LS970... I hope it works....
Update January 2 2016 :
I downloaded and tried the 5.1.1 version and the 6.0 v2 version and tried the 6.0 version first.
On the 6.0, ROM functions seem to work properly, however, just like with other 6.0 ROMs, I'm getting no reception on my LS970. It's a great ROM and a lot cooler (in terms of phone temperature) than other 6.0 ROMs I've tried before, even during heavy loads.. However, since i get no reception on this version, I can't use it as a daily driver. Thus I flashed the 5.1.1 version
On the 5.1.1 version, everything works, and I get a very good reception! I've been using it for a couple of days now and I must say I'm impressed. Battery life is even better then the time my phone was on 4.4.4 version of Liquidsmooth! Temperature was also cooler than other 5.1.1 ROMs I had before. I'm using the 5.1.1 version as a daily driver at the moment, until the 6.0 can be used as a daily driver.
Thank you @ChiKaLiO

shindou01 said:
i'm gonna try this on my LS970... I hope it works....
Update January 2 2016 :
I downloaded and tried the 5.1.1 version and the 6.0 v2 version and tried the 6.0 version first.
On the 6.0, ROM functions seem to work properly, however, just like with other 6.0 ROMs, I'm getting no reception on my LS970. It's a great ROM and a lot cooler (in terms of phone temperature) than other 6.0 ROMs I've tried before, even during heavy loads.. However, since i get no reception on this version, I can't use it as a daily driver. Thus I flashed the 5.1.1 version
On the 5.1.1 version, everything works, and I get a very good reception! I've been using it for a couple of days now and I must say I'm impressed. Battery life is even better then the time my phone was on 4.4.4 version of Liquidsmooth! Temperature was also cooler than other 5.1.1 ROMs I had before. I'm using the 5.1.1 version as a daily driver at the moment, until the 6.0 can be used as a daily driver.
Thank you @ChiKaLiO
Click to expand...
Click to collapse
U welcom this make me happy ^^
Sent from my LG Optimus G using Tapatalk

ChiKaLiO said:
U welcom this make me happy ^^
Sent from my LG Optimus G using Tapatalk
Click to expand...
Click to collapse
@ChiKaLiO, What do you think caused the issue of no reception when I use the 6.0 version on my LS970? If you have any thoughts on how to work around it, I'm more than willing to give it a shot.
I've had some random reboots on the 5.1.1 but it's app specific so I'm sure it's just an app compatibility issue, I'm loving it!

Wait for the next release this is a test version so.. :* thnx xd u r the only one encouraging me [emoji14]
Sent from my LG Optimus G using Tapatalk

ChiKaLiO said:
Wait for the next release this is a test version so.. :* thnx xd u r the only one encouraging me [emoji14]
Sent from my LG Optimus G using Tapatalk
Click to expand...
Click to collapse
Remember for e970 version

It s just pure android..
Sent from my LG Optimus G using Tapatalk

Hi is it possible to port the e975 rom to e970 for marshmallow also using the guide provided in the e970 forum?
If so I would like to help .. but am not a pro in these things, so will need guidance. Let me know your thoughts.
Great work by great Devs!!

milindchitale said:
Hi is it possible to port the e975 rom to e970 for marshmallow also using the guide provided in the e970 forum?
If so I would like to help .. but am not a pro in these things, so will need guidance. Let me know your thoughts.
Great work by great Devs!!
Click to expand...
Click to collapse
Thread link?
Sent from my LG-E975 using Tapatalk

ChiKaLiO said:
Thread link?
Sent from my LG-E975 using Tapatalk
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2442593

milindchitale said:
http://forum.xda-developers.com/showthread.php?t=2442593
Click to expand...
Click to collapse
normally it will work
did u test it ? (i don't have an e970 so..)
can you try this kernel with the rom ?
http://forum.xda-developers.com/optimus-g-att/development/kernel-6-0-rom-geehrc-e970-t3263706

ChiKaLiO said:
normally it will work
did u test it ? (i don't have an e970 so..)
Click to expand...
Click to collapse
No.
I wanted to know if the technique would work for the Marshmallow version.If you think it might work, I would be happy to lend a help in rying it out with your rom.
will update you once I have done it.
milind

shindou01 said:
i'm gonna try this on my LS970... I hope it works....
Update January 2 2016 :
I downloaded and tried the 5.1.1 version and the 6.0 v2 version and tried the 6.0 version first.
On the 6.0, ROM functions seem to work properly, however, just like with other 6.0 ROMs, I'm getting no reception on my LS970. It's a great ROM and a lot cooler (in terms of phone temperature) than other 6.0 ROMs I've tried before, even during heavy loads.. However, since i get no reception on this version, I can't use it as a daily driver. Thus I flashed the 5.1.1 version
On the 5.1.1 version, everything works, and I get a very good reception! I've been using it for a couple of days now and I must say I'm impressed. Battery life is even better then the time my phone was on 4.4.4 version of Liquidsmooth! Temperature was also cooler than other 5.1.1 ROMs I had before. I'm using the 5.1.1 version as a daily driver at the moment, until the 6.0 can be used as a daily driver.
Thank you @ChiKaLiO
Click to expand...
Click to collapse
where do you get the 5.1.1 and the gapps pack? i tried to install the 5.0 at the top of this page and it didn't work.

which rom is best for Note2 N7100

Eclipse aicp or Resurrection remix ???

ivan's 5.1.1or haifish's mr luong 4.6 best stabil roms
GT-N7100 cihazımdan Tapatalk kullanılarak gönderildi

There is no best ROM.
Every ROM has it own taste.

Maqbool.Safiya said:
Eclipse aicp or Resurrection remix ???
Click to expand...
Click to collapse
Eclipse v9
but, like Moderator says, taste is deferent with each rom... :good:

Trafalgar Square said:
There is no best ROM.
Every ROM has it own taste.
Click to expand...
Click to collapse
Many ROMs have lost functionalities of the note 2. Some son have HDMI out . I have tried resurrection remix the mm and the nougat . the nougat has no xposed .
The eclipse was my previous ROM I think I would go back to eclipse until RR team fix their nougat

I'm also looking for a good rom for my note 2 (4.1.2)
based on my searches, since there isn't much differences between marshmallow and nougat, I think DITTO NOTE 7 FOR NOTE 2 (6.0.1) is a good option too
I don't which is more stable: DITTO NOTE 7 FOR NOTE 2 or ResurrectionRemix v5.8.3
any help?

xdima said:
I'm also looking for a good rom for my note 2 (4.1.2)
based on my searches, since there isn't much differences between marshmallow and nougat, I think DITTO NOTE 7 FOR NOTE 2 (6.0.1) is a good option too
I don't which is more stable: DITTO NOTE 7 FOR NOTE 2 or ResurrectionRemix v5.8.3
any help?
Click to expand...
Click to collapse
Ditto note 7 is a kitkat rom not mm. No touchwiz rom can be on mm, rom makers just add mm platlogo mod to thier rom so the android version is shown to be mm(as thier rom is mm style, they modded the platlogo to mm as well)... And here you have to decide weather you want touchwiz or aosp.
For me , eclipse is better than ditto note 7. Although i didnt tried dn7 but after watching some videos on YouTube i think that dn7 is purely based on theming ,the base is old dn4 . You can also see the original dn4 in some apps as theming is not fully applied. I used eclipse for about 2-3 months and was really impressed by its battery life and looks of a modern samsung touchwiz. Maybe dn7 would work good but not as good as eclipse.
And Resurrection remix is not in good condition as it has not been updated for a while and have some bugs. So i recommend Xenon hd or nuclearom or AiCP . These have been the top players for note 2 recently as they are being updated very frequently.
Aicp is updated everyday(nightlies), XenonHD got an update yesterday and nuclearom was about a week ago. For me xenonhd got best the battery life,aicp has customizations (like rr) and nuclearom is most minimal .
Thats all i had

Gurkanwal Chauhan said:
Ditto note 7 is a kitkat rom not mm. No touchwiz rom can be on mm, rom makers just add mm platlogo mod to thier rom so the android version is shown to be mm(as thier rom is mm style, they modded the platlogo to mm as well)... And here you have to decide weather you want touchwiz or aosp.
For me , eclipse is better than ditto note 7. Although i didnt tried dn7 but after watching some videos on YouTube i think that dn7 is purely based on theming ,the base is old dn4 . You can also see the original dn4 in some apps as theming is not fully applied. I used eclipse for about 2-3 months and was really impressed by its battery life and looks of a modern samsung touchwiz. Maybe dn7 would work good but not as good as eclipse.
And Resurrection remix is not in good condition as it has not been updated for a while and have some bugs. So i recommend Xenon hd or nuclearom or AiCP . These have been the top players for note 2 recently as they are being updated very frequently.
Aicp is updated everyday(nightlies), XenonHD got an update yesterday and nuclearom was about a week ago. For me xenonhd got best the battery life,aicp has customizations (like rr) and nuclearom is most minimal .
Thats all i had
Click to expand...
Click to collapse
Thanks Gurkanwal for your valuable information
I just got more confused with new options!
I think I would prefer a touchwiz rom (more like a real Note) but I do want a "stable" rom, so it seems the options are between eclipse & dn7
based on what they've written on their website, dn7 has only a problem with radio sound
did you have any difiiculties with your eclipse rom?

xdima said:
Thanks Gurkanwal for your valuable information
I just got more confused with new options!
I think I would prefer a touchwiz rom (more like a real Note) but I do want a "stable" rom, so it seems the options are between eclipse & dn7
based on what they've written on their website, dn7 has only a problem with radio sound
did you have any difiiculties with your eclipse rom?
Click to expand...
Click to collapse
Nope.. I dont know if radio bug is there too.. Rest everything is smooth and stable

The best custom rom for Optimus G E975

hello
What is your the best custom rom for e975?
Nitrogen OS 7.1 is a very good rom, stable and battery economy. I used it over two weeks and have not noticed any problems, but nougat does not support xposed yet
I use Resurrection Remix M which support xposed, but rom does not development now.
I am looking for the best stable custom rom and battery economy, not perfomance, long battery time
Sorry for my english :angel:

katze750 said:
hello
What is your the best custom rom for e975?
Nitrogen OS 7.1 is a very good rom, stable and battery economy. I used it over two weeks and have not noticed any problems, but nougat does not support xposed yet
I use Resurrection Remix M which support xposed, but rom does not development now.
I am looking for the best stable custom rom and battery economy, not perfomance, long battery time
Sorry for my english :angel:
Click to expand...
Click to collapse
There's no M rom in active development

What about custom rom kk?
[ROM][4.4.2][E975-E975T-F180][OTA] Sling v3.3.01
[ROM] | ARTMOD v7 | 4.4.2 | E97520A | AROMA | OTA
Are they better and stable than mm rom ?
Nitrogen OS 7.1 dosn`t support xposed. I use Resurrection Remix M v5.7.4, but I have problems with proximity sensor.

katze750 said:
What about custom rom kk?
[ROM][4.4.2][E975-E975T-F180][OTA] Sling v3.3.01
[ROM] | ARTMOD v7 | 4.4.2 | E97520A | AROMA | OTA
Are they better and stable than mm rom ?
Nitrogen OS 7.1 dosn`t support xposed. I use Resurrection Remix M v5.7.4, but I have problems with proximity sensor.
Click to expand...
Click to collapse
Great rom, I've recently returned to a stock rom with my own personal tweeks. From memory I had difficulty getting 4g/lte on artmod. Would certainly suggest giving it a go to make up your own mind. After being on m and n builds for a while the battery and camera on stock is amazing. Not having all apps available is challenging (eg those designed for m and n).

[lt03lte] [Resurrection Remix 5.8.4 unofficial] vs. [lineage 14.1]

I am looking to upgrade my p607t from lollipop 5.1.1 to either {RR-N-v5.8.4-20170808-lt03lte-Unofficial} or {lineage-14.1-20170816-nightly-lt03lte-signed}.
I would like to get some opinions..... which one do you prefer? I like what i hear about the customization options from RR, but I am concerned about the unofficial version, and how easy/difficult it would be to update it as necessary. I was also wondering how the battery life and stability compare.
Thanks all

RR unofficial has the same few bugs as Lineage unofficial, as they are from the same dev, Lineage official is said to be in a hardly useable state.