[ROM] [LINARO] CyanogenMod 10.2 for Xiaomi Redmi 1S (armani) - Xiaomi Redmi 1S

Status: Not Bootable
If possible, please provide logcat so I can investigate!
Hi everyone, I compiled CyanogenMod 10.2 (JellyBean 4.3) for armani
The reason I built this ROM is because I couldn't find a "AOSP-ish" JellyBean ROM for armani.
It should be stable as it uses proprietary binaries from the stock ROM & official Xiaomi Kernel sources. But I can't guarantee.
The build is based on the stable branch of CyanogenMod 10.2.
ROM is compiled with Linaro 4.8 and Kernel is compiled with Linaro 4.9 for maximum smoothness.
Please test and report problems as I don't have this device. I will try and find a solution if things are broken.
Hence why I said I can't guarantee how stable it is because this is UNTESTED
Flash at your own risk!!
ROM may be UNROOTED because the target build is user (instead of userdebug), so DO NOT FORGET TO FLASH SUPERSU zip
Instructions:
0. Make sure that you have a custom recovery (I highly recommend TWRP)
1. Wipe Data
2. Flash the ROM
3. Flash Gapps
4. (optional) Flash SuperSU if you want root
5. Enjoy
Download
Download from d-h.st
Gapps
Mirror 1
Mirror 2
Mirror 3
SuperSU
http://download.chainfire.eu/supersu
FAQ
Why is it unrooted?
Because the target build is 'user' instead of 'userdebug'. 'user' disables few debugging modules and it will improve performance a bit.
Kernel Source:
https://github.com/MiCode/Xiaomi_Kernel_OpenSource/tree/armani-jb-oss
Device Tree:
https://github.com/armani-dev/android_device_xiaomi_armani/tree/cm-10.2
Blobs:
https://github.com/armani-dev/proprietary_vendor_xiaomi/tree/cm-10.2

Reserved

great i test and report my feedback BOOOTLOOOP

Stuck at MI logo..

striplex said:
great i test and report my feedback BOOOTLOOOP
Click to expand...
Click to collapse
Jayanttyagi said:
Stuck at MI logo..
Click to expand...
Click to collapse
How long you guys been waiting?
Could you guys provide a logcat?
Sorry for the inconvenience, I don't have the device right now.

couple of minutes and I don't have the rom now.. deleted it after trying 3 times.. i flashed rom+gapps+supersu at first.. then rom+gapps and then again only rom at last try.. so it's definitely the rom..

Jayanttyagi said:
couple of minutes and I don't have the rom now.. deleted it after trying 3 times.. i flashed rom+gapps+supersu at first.. then rom+gapps and then again only rom at last try.. so it's definitely the rom..
Click to expand...
Click to collapse
I'm sorry, thanks for trying.
Anyone willing to give me a logcat if possible?

Sorry i m a noob , how can i give you a logcat ?
I install first rom than gapp, after only rom but in same case bootloop.
I use on linux adb command "adb logcat" when the terminal in bootloop but in the terminal there is :"waiting for devices "
Sorry for my bad english.

I guess it means the kernel failed to boot.
Something's wrong.. I've built ROM twice for Nexus 4 and Xperia L but never had this problem..
Unfortunately I will be out of town this weekend so I can only continue working on this ROM on Wednesday.
If anyone knows what the problem is please PM me or reply to this thread.
DL link will be kept alive so people can continue investigating.

KcLKcL said:
Status: Not Bootable
If possible, please provide logcat so I can investigate!
Hi everyone, I compiled CyanogenMod 10.2 (JellyBean 4.3) for armani
The reason I built this ROM is because I couldn't find a "AOSP-ish" JellyBean ROM for armani.
It should be stable as it uses proprietary binaries from the stock ROM & official Xiaomi Kernel sources. But I can't guarantee.
The build is based on the stable branch of CyanogenMod 10.2.
ROM is compiled with Linaro 4.8 and Kernel is compiled with Linaro 4.9 for maximum smoothness.
Please test and report problems as I don't have this device. I will try and find a solution if things are broken.
Hence why I said I can't guarantee how stable it is because this is UNTESTED
Flash at your own risk!!
ROM may be UNROOTED because the target build is user (instead of userdebug), so DO NOT FORGET TO FLASH SUPERSU zip
Instructions:
0. Make sure that you have a custom recovery (I highly recommend TWRP)
1. Wipe Data
2. Flash the ROM
3. Flash Gapps
4. (optional) Flash SuperSU if you want root
5. Enjoy
Download
Download from d-h.st
Gapps
Mirror 1
Mirror 2
Mirror 3
SuperSU
http://download.chainfire.eu/supersu
FAQ
Why is it unrooted?
Because the target build is 'user' instead of 'userdebug'. 'user' disables few debugging modules and it will improve performance a bit.
Kernel Source:
https://github.com/MiCode/Xiaomi_Kernel_OpenSource/tree/armani-jb-oss
Device Tree:
https://github.com/armani-dev/android_device_xiaomi_armani/tree/cm-10.2
Blobs:
https://github.com/armani-dev/proprietary_vendor_xiaomi/tree/cm-10.2
Click to expand...
Click to collapse
Hay guy please make this build bootable for us cause you only give cm 10 on our redmi 1s .:crying:

niral.naik said:
Hay guy please make this build bootable for us cause you only give cm 10 on our redmi 1s .:crying:[
why do you want 2 year old cm10 when there is cm13 available ?
Click to expand...
Click to collapse

smustafasms said:
niral.naik said:
Hay guy please make this build bootable for us cause you only give cm 10 on our redmi 1s .:crying:[
why do you want 2 year old cm10 when there is cm13 available ?
Click to expand...
Click to collapse
Sir I am also junior 15 yes old developer and new in XDA .I am running cm 13 mokee in redmi 1s but I love old android version like doubt cupcake froyo but those can not be compiled by redmi 1s. I tried to make my own build of cm 10.1 for my redmi (reason to try jelly bean and become famous + senior Dev on xda ) I have no previous experience so I made a big brick and bootloop in redmi 1s . I want to learn what is my Build's bug . so I need working source from you sir . Thanks.
Click to expand...
Click to collapse

niral.naik said:
smustafasms said:
Sir I am also junior 15 yes old developer and new in XDA .I am running cm 13 mokee in redmi 1s but I love old android version like doubt cupcake froyo but those can not be compiled by redmi 1s. I tried to make my own build of cm 10.1 for my redmi (reason to try jelly bean and become famous + senior Dev on xda ) I have no previous experience so I made a big brick and bootloop in redmi 1s . I want to learn what is my Build's bug . so I need working source from you sir . Thanks.
Click to expand...
Click to collapse
My friend CM11(kitkat) is faster than previous jellybean version. whats the use of using old builds with less security and apps are too mentioning kitkat & above as requirements. I have been using android since the days of doughnut, eclair, froyo, gingerbread, icecream sandwich as android os. nothing beats kitkat in smoothness and app stability. Try your mind to focus on new builds instead of old ones bro
Click to expand...
Click to collapse

why to use jb when u have mm ?? n jb is not safe regarding security as well!!!

Sir I think this could be a good rom in dualboot with others or as a primary daily driver or (it's my best thought about this rom) as multimedia rom because the MIUI V5 has the best camera and audio performances so there would be the possibility to port camera libs and app from MIUIV5v56 global(latest stable global MIUI V5 build going by what I know) and music libs and apps and also mixer_paths.xml and other audio related files,who agree?!

Dr. Joy Das said:
niral.naik said:
My friend CM11(kitkat) is faster than previous jellybean version. whats the use of using old builds with less security and apps are too mentioning kitkat & above as requirements. I have been using android since the days of doughnut, eclair, froyo, gingerbread, icecream sandwich as android os. nothing beats kitkat in smoothness and app stability. Try your mind to focus on new builds instead of old ones bro
Click to expand...
Click to collapse
Agree. Kitkat is still the best Android OS till now.
Click to expand...
Click to collapse

Instead , i l suggest you to continnue development of cm11, or 12.1, adding security patches, implementing caf changes etc etc..

Dr. Joy Das said:
niral.naik said:
My friend CM11(kitkat) is faster than previous jellybean version. whats the use of using old builds with less security and apps are too mentioning kitkat & above as requirements. I have been using android since the days of doughnut, eclair, froyo, gingerbread, icecream sandwich as android os. nothing beats kitkat in smoothness and app stability. Try your mind to focus on new builds instead of old ones bro
Click to expand...
Click to collapse
Yeah I am focusing for cm14 android N project .
Thanks for your advice sir.
Click to expand...
Click to collapse

Related

23/04/15 Mokee ROM Android 5.1 for Redmi 1s Nightly finally available[Latest Thread]

Helloooo
This is Me Ashbin with the latest news of Xiaomi Redmi 1s
Mokee ROM Armani (5.1.1) Nightly is here
No Bugs Found , If Found please report
The 1st one is the cm 12.1
Syhost Bangs again.......!!!!!!
ChangeLog
Ba Bye
Do hit thanks if I helped..!!!
- Team ROM Nation
Please refer to this post
http://forum.xda-developers.com/redmi-1s/development/rom-mokee-opensource-mk44-4-release-t2911148
and it's already Mokee 5.1.1
@dels07
Yes its not cm12.1 but Mokee Rom 5.1.1
ROM Nation said:
@dels07
Yes its not cm12.1 but Mokee Rom 5.1.1
Click to expand...
Click to collapse
How about this?
http://forum.xda-developers.com/redmi-1s/general/cm12-ril-fixed-released-syhost-t3058866
ROM is unstable and completely unusable once u reboot .A lot of processes and System UI force closes. However ram management is really good ,see SS.
@sanijb743
That will be fixed soon (I hope)
I am too facing the same problem but I re flashed and it works flawlessly
khairulez said:
How about this?
http://forum.xda-developers.com/redmi-1s/general/cm12-ril-fixed-released-syhost-t3058866
Click to expand...
Click to collapse
Yes but they are all CM 12.1
But this is Android 5.1.1
ROM Nation said:
Yes but they are all CM 12.1
But this is Android 5.1.1
Click to expand...
Click to collapse
DO not duplicate thread!!! HERE is NOT miui forum. Be nice and keep the forum clean. If you has been read my thread tou can found there the information about 5.1.1 release! Now, for those like you I've included in the title!
Duplicate thread.
Thread closed.

[ROM][UNOFFICIAL][6.0][GEEHRC] LIQUIDSMOOTH V6 Monthly

This is my build of LiquidSmooth V6 rom for our lovely Optimus G [MM6.0] Working on E975 F180
No More Updates Sorry E970 Users LiquidSMooth Has Ben Abandoned From devs.. Follow My unofficial CM ..
Downloads:
Gapps
GEEHRC MM 6.0.0 V2
Older Build:
GEEHRC LP 5.11
GEEHRC MM 6.0.0 V1
Flashing instuctions:
Download the Rom
Download Gapps
Download TWRP from here
Make full wipe
Flash the ROM zip & Gapps
Enjoy
PS:
- First Boot Can Take Up to 5-7Mins
-If Sensors don't work:
Boot into recovery
Make full wipe
Install any other gee rom (e.g. Axxion)
Reboot (use rom for a while)
Back to your recovery
Make full wipe again
Install the ROM and GAPPS
Bugs:
No hardware lights
& waiting for you'r reviews and reports ^^
SOURCES:
Device: https://github.com/ChiKaLiO/android_device_lge_geehrc
Kernel: https://github.com/ChiKaLiO/android_kernel_lge_gee
THANKS TO:
@dad11 For His Help & Instuctions & Device Tree
@Kevinjoa For Making this Happen..
All Optimus G Devloppers
Screenshots:
XDA:DevDB Information
UNOFFICIAL LIQUIDSMOOTH V6 Monthly, ROM for the LG Optimus G
Contributors
ChiKaLiO
Source Code: https://github.com/LiquidSmooth/android
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.4.x
Based On: AOSP
Version Information
Status: Test
Beta Release Date: 2015-11-16
Created 2015-11-16
Uptaded 2015-12-14
First impressions: good rom! Super fast and feels solid! But I can't use it as I can't receive calls which I need.
Also:
- No NFC
- No hardware lights
I personally would prefer the option to diable hardware lights and keys and enable the android function keys. Keep up the good work for our phone
x_justin said:
First impressions: good rom! Super fast and feels solid! But I can't use it as I can't receive calls which I need.
Also:
- No NFC
- No hardware lights
I personally would prefer the option to diable hardware lights and keys and enable the android function keys. Keep up the good work for our phone
Click to expand...
Click to collapse
ty it will be fixed soon :*
hey man just wanna noe that after compiling while flashing mm6.0 ls rom does it say that unable to unmont system coz it says in mine installation successful.but due to thisit doesnot boot up... can u suggest something.
Unmount it manually
Sent from my LG-E975 using Tapatalk
Update <3
ChiKaLiO said:
This is my build of LiquidSmooth V6 rom for our lovely Optimus G [MM6.0] Working onE975 F180
Downloads:
Gapps
GEEHRC MM 6.0.0 V2
Older Build:
GEEHRC LP 5.11
GEEHRC MM 6.0.0 V1
Flashing instuctions:
Download the Rom
Download Gapps
Download TWRP from here
Make full wipe
Flash the ROM zip & Gapps
Enjoy
PS:
- First Boot Can Take Up to 5-7Mins
-If Sensors don't work:
Boot into recovery
Make full wipe
Install any other gee rom (e.g. Axxion)
Reboot (use rom for a while)
Back to your recovery
Make full wipe again
Install the ROM and GAPPS
Bugs:
No hardware lights
& waiting for you'r reviews and reports ^^
SOURCES:
Device: https://github.com/ChiKaLiO/android_device_lge_geehrc
Kernel: https://github.com/ChiKaLiO/android_kernel_lge_gee
THANKS TO:
@dad11 For His Help & Instuctions & Device Tree
@Kevinjoa For Making this Happen..
All Optimus G Devloppers
Screenshots:
XDA:DevDB Information
UNOFFICIAL LIQUIDSMOOTH V6 Monthly, ROM for the LG Optimus G
Contributors
ChiKaLiO
Source Code: https://github.com/LiquidSmooth/android
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.4.x
Based On: AOSP
Version Information
Status: Test
Beta Release Date: 2015-11-16
Created 2015-11-16
Uptaded 2015-12-14
Click to expand...
Click to collapse
Ready for daily use no bugs for now smooth and really good battery & doze mod...
ChiKaLiO said:
Ready for daily use no bugs for now smooth and really good battery & doze mod...
Click to expand...
Click to collapse
Will you support e970?
Chum.zuizui said:
Will you support e970?
Click to expand...
Click to collapse
es in the future ..
i'm gonna try this on my LS970... I hope it works....
Update January 2 2016 :
I downloaded and tried the 5.1.1 version and the 6.0 v2 version and tried the 6.0 version first.
On the 6.0, ROM functions seem to work properly, however, just like with other 6.0 ROMs, I'm getting no reception on my LS970. It's a great ROM and a lot cooler (in terms of phone temperature) than other 6.0 ROMs I've tried before, even during heavy loads.. However, since i get no reception on this version, I can't use it as a daily driver. Thus I flashed the 5.1.1 version
On the 5.1.1 version, everything works, and I get a very good reception! I've been using it for a couple of days now and I must say I'm impressed. Battery life is even better then the time my phone was on 4.4.4 version of Liquidsmooth! Temperature was also cooler than other 5.1.1 ROMs I had before. I'm using the 5.1.1 version as a daily driver at the moment, until the 6.0 can be used as a daily driver.
Thank you @ChiKaLiO
shindou01 said:
i'm gonna try this on my LS970... I hope it works....
Update January 2 2016 :
I downloaded and tried the 5.1.1 version and the 6.0 v2 version and tried the 6.0 version first.
On the 6.0, ROM functions seem to work properly, however, just like with other 6.0 ROMs, I'm getting no reception on my LS970. It's a great ROM and a lot cooler (in terms of phone temperature) than other 6.0 ROMs I've tried before, even during heavy loads.. However, since i get no reception on this version, I can't use it as a daily driver. Thus I flashed the 5.1.1 version
On the 5.1.1 version, everything works, and I get a very good reception! I've been using it for a couple of days now and I must say I'm impressed. Battery life is even better then the time my phone was on 4.4.4 version of Liquidsmooth! Temperature was also cooler than other 5.1.1 ROMs I had before. I'm using the 5.1.1 version as a daily driver at the moment, until the 6.0 can be used as a daily driver.
Thank you @ChiKaLiO
Click to expand...
Click to collapse
U welcom this make me happy ^^
Sent from my LG Optimus G using Tapatalk
ChiKaLiO said:
U welcom this make me happy ^^
Sent from my LG Optimus G using Tapatalk
Click to expand...
Click to collapse
@ChiKaLiO, What do you think caused the issue of no reception when I use the 6.0 version on my LS970? If you have any thoughts on how to work around it, I'm more than willing to give it a shot.
I've had some random reboots on the 5.1.1 but it's app specific so I'm sure it's just an app compatibility issue, I'm loving it!
Wait for the next release this is a test version so.. :* thnx xd u r the only one encouraging me [emoji14]
Sent from my LG Optimus G using Tapatalk
ChiKaLiO said:
Wait for the next release this is a test version so.. :* thnx xd u r the only one encouraging me [emoji14]
Sent from my LG Optimus G using Tapatalk
Click to expand...
Click to collapse
Remember for e970 version
It s just pure android..
Sent from my LG Optimus G using Tapatalk
Hi is it possible to port the e975 rom to e970 for marshmallow also using the guide provided in the e970 forum?
If so I would like to help .. but am not a pro in these things, so will need guidance. Let me know your thoughts.
Great work by great Devs!!
milindchitale said:
Hi is it possible to port the e975 rom to e970 for marshmallow also using the guide provided in the e970 forum?
If so I would like to help .. but am not a pro in these things, so will need guidance. Let me know your thoughts.
Great work by great Devs!!
Click to expand...
Click to collapse
Thread link?
Sent from my LG-E975 using Tapatalk
ChiKaLiO said:
Thread link?
Sent from my LG-E975 using Tapatalk
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2442593
milindchitale said:
http://forum.xda-developers.com/showthread.php?t=2442593
Click to expand...
Click to collapse
normally it will work
did u test it ? (i don't have an e970 so..)
can you try this kernel with the rom ?
http://forum.xda-developers.com/optimus-g-att/development/kernel-6-0-rom-geehrc-e970-t3263706
ChiKaLiO said:
normally it will work
did u test it ? (i don't have an e970 so..)
Click to expand...
Click to collapse
No.
I wanted to know if the technique would work for the Marshmallow version.If you think it might work, I would be happy to lend a help in rying it out with your rom.
will update you once I have done it.
milind
shindou01 said:
i'm gonna try this on my LS970... I hope it works....
Update January 2 2016 :
I downloaded and tried the 5.1.1 version and the 6.0 v2 version and tried the 6.0 version first.
On the 6.0, ROM functions seem to work properly, however, just like with other 6.0 ROMs, I'm getting no reception on my LS970. It's a great ROM and a lot cooler (in terms of phone temperature) than other 6.0 ROMs I've tried before, even during heavy loads.. However, since i get no reception on this version, I can't use it as a daily driver. Thus I flashed the 5.1.1 version
On the 5.1.1 version, everything works, and I get a very good reception! I've been using it for a couple of days now and I must say I'm impressed. Battery life is even better then the time my phone was on 4.4.4 version of Liquidsmooth! Temperature was also cooler than other 5.1.1 ROMs I had before. I'm using the 5.1.1 version as a daily driver at the moment, until the 6.0 can be used as a daily driver.
Thank you @ChiKaLiO
Click to expand...
Click to collapse
where do you get the 5.1.1 and the gapps pack? i tried to install the 5.0 at the top of this page and it didn't work.

Which rom is stable and close to plain android?

I got this phone 2nd hand, but I cant stand the MIUI stuff. Any stable rom that offers a clean android experience?
I have tried to download the Cyanogen Mod 12.1 but the ROM seems to be offline.
you can try CM13, but it is still in the development stage.
what do you mean by offline??
Well, by offline I mean that the download link returns "request timed out".
ok try mokee 5.1.1 release version with xcelerate kernel build 24 its the best stable for now.... if you want to tweak audio then try viperatmos by guitardedhero........ and believe me this is the great experience i got till now with redmi 1s
slst said:
ok try mokee 5.1.1 release version with xcelerate kernel build 24 its the best stable for now.... if you want to tweak audio then try viperatmos by guitardedhero........ and believe me this is the great experience i got till now with redmi 1s
Click to expand...
Click to collapse
Did you try Xposed for Lollipop, it works in the ROM?
Yes its working...... i dont use custom rom without xposed
Try aosp lollipop. It's the best and stable with xcelerate kernel. Try it.

Best Nougat(7.1.x) Rom for Xiaomi 1s/armani ??

Best value for money phone Xiaomi Redmi 1s/Armani has lots of custom ROM based on latest Android version. I made list of all Nougat based ROM. Which ROM do you use Share your thoughts. THANKS ALL DEV XDA for such support for this device.
Android Nougat (7.1.x) based ROMs
1. Lineage OS 14.1
2. Dirty Unicorns
3. Android Ice Cold Project 12.1
4. CITRUS-CAF
5. Resurrection Remix
6. Slim 7
7. XOSP N
8. AOKP N
9. XenonHD
10. MoKee Open source
Aicp no doubt go for it it's official now best dev support etc every feature included
hafeez90 said:
Aicp no doubt go for it it's official now best dev support etc every feature included
Click to expand...
Click to collapse
Agreed.. for best performance and battery life.. go for AICP
hafeez90 said:
Aicp no doubt go for it it's official now best dev support etc every feature included
Click to expand...
Click to collapse
Just flashed AICP and using kernal PhanTom v8 beta v5 any other tweak to make it better
Is it better than Resurrection Remix?
Sameer V said:
Is it better than Resurrection Remix?
Click to expand...
Click to collapse
RR has best customise features but I feel some lags.
saurabhrakshak said:
Just flashed AICP and using kernal PhanTom v8 beta v5 any other tweak to make it better
Click to expand...
Click to collapse
Aicp already have Phantom v8 beta5 features in it. So no need to flash the kernel.
hemantbeast said:
Aicp already have Phantom v8 beta5 features in it. So no need to flash the kernel.
Click to expand...
Click to collapse
Thank you hemantbeast :good:
What about front facing camera in AICP? Does it work or have same problem of "can't connect to camera?"
Sameer V said:
What about front facing camera in AICP? Does it work or have same problem of "can't connect to camera?"
Click to expand...
Click to collapse
No, It's perfectly fine
does any one know second SIM how to turn off..i didnt find SIM turn off option in sim management in AICP,RR,..plz help me
vijay480 said:
does any one know second SIM how to turn off..i didnt find SIM turn off option in sim management in AICP,RR,..plz help me
Click to expand...
Click to collapse
Use latest twrp and reflash clean ROM and try
I'm not sure with this but I don't face such issue
Cm 14. is buggy
I would say, go with Slim7. It's the smoothest ROM I've ever tried. It's also stable as well.
saurabhrakshak said:
Best value for money phone way back from 2-3 years to till now. So please guide me which ROM is good for what for our beast. Make it big comparison between all ROM. THANKS ALL DEV XDA for such support for this device.
Android Nougat (7.1.x) based ROMs
1. CyanogenMod 14.1
2. MoKee Open source
3. Android Ice Cold Project 12.1
4. Resurrection Remix
5. Slim 7 alpha 0.3
6. XenonHD
Click to expand...
Click to collapse
yelnam2manley said:
I would say, go with Slim7. It's the smoothest ROM I've ever tried. It's also stable as well.
Click to expand...
Click to collapse
I think it still need some updates
Lineagos 14.1
rupesh (Rv) said:
Lineagos 14.1
Click to expand...
Click to collapse
Yes Lineage is live
saurabhrakshak said:
Yes Lineage is live
Click to expand...
Click to collapse
In AICP 7.1 are you facing screen not turning on after unlock button???
slst said:
In AICP 7.1 are you facing screen not turning on after unlock button???
Click to expand...
Click to collapse
No.
I'm daily update with AICP OTA,
I suggest you to try clean install
Currently Using CITRUS-CAF [OMS][3.0][TANGERINE] ROM. So far SO Good

CyanogenMod 12.1 for MiPad (mocha)

Here is CyanogenMod 12.1 for XiaoMi MiPad.
Whats working:
Sound
3d graphics
Hardware accelerated video decoding
WiFi
Sensors (screen autorotation)
Camera
Not working:
Camera lags in Photo mode
Sometimes main camera is not detected to fix try to power off/power on tablet.
WiFi sometimes forget saved passwords
Stock MIUI 6.12.12 kernel 3.10.24 used in ROM for now.
Device tree source: https://github.com/HighwayStar/android_device_xiaomi_mocha
Vendor tree: https://github.com/HighwayStar/android_vendor_xiaomi_mocha
Unfortunately CM12.1 tree still need some patches that cant be integrated in device tree, check issues page if you want to try build it https://github.com/HighwayStar/android_device_xiaomi_mocha/issues
Help with issues left are welcome.
Downloads:
Beta 1: cm-12.1-20170110-UNOFFICIAL-mocha.zip
Changelog:
First release
Beta 2: cm-12.1-20170117-UNOFFICIAL-mocha.zip
Changelog:
Camera HAL hex-patched from API19 to API21
buid.prop tags fixed, tablet now correctly detected as MI PAD by Play Market
XDA:DevDB Information
CyanogenMod 12.1 for MiPad (mocha) , ROM for the Xiaomi Mi Pad
Contributors
highwaystar_ru
Source Code: https://github.com/HighwayStar/android_device_xiaomi_mocha
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.10.x
Based On: CyanogenMod
Version Information
Status: Beta
Current Beta Version: 2
Beta Release Date: 2017-01-17
Created 2017-01-10
Last Updated 2017-01-18
reserved
For a review.
Thank you for keeping the Mi Pad alive ?
IMO, this is the best MiPad ROM! Thank you so much, Sir!
Smoothest ROM for MiPad
Flashed smoke kernel on top of it. I know it can mess things up.
Will keep updating if that helps or not.
Thanks for developing for Mipad.. Hopefully we can have some other developers who can chip in to help to write wrappers for the camera... (I know not priority)
Thanks a lot!
So, we booted cm12.1 and ported shields kernel. Is it possible to move further? Cm 13 for example? Or cm12.1 based customs.
Star_king12 said:
So, we booted cm12.1 and ported shields kernel. Is it possible to move further? Cm 13 for example? Or cm12.1 based customs.
Click to expand...
Click to collapse
cm13 would be better but, at this time we should focus on stablizing cm 12.1
OoSTARTERoO said:
cm13 would be better but, at this time we should focus on stablizing cm 12.1
Click to expand...
Click to collapse
Absolutely agree with you. Once cm12 is stabilized we can hope for a marshmallow or even a nougat ROM.
Regarding the graphics, will we get vulkan support?
hell1134 said:
Absolutely agree with you. Once cm12 is stabilized we can hope for a marshmallow or even a nougat ROM.
Regarding the graphics, will we get vulkan support?
Click to expand...
Click to collapse
On nougat, yes we may.
Edit: no nougat for k1 but marshmallow has vulkan so we can get blobs from it once we get marshmallow.
Awesome... Can't wait to reach home and flash this.... Have waited so long to get away from MiUi
Sent from my Nexus 6P using XDA-Developers Legacy app
Sudeep Duhoon said:
On nougat, yes we may.
Edit: no nougat for k1 but marshmallow has vulkan so we can get blobs from it once we get marshmallow.
Click to expand...
Click to collapse
Why? Shield tablet has k1 and nougat.
Star_king12 said:
Why? Shield tablet has k1 and nougat.
Click to expand...
Click to collapse
I didn't knew about custom roms. The point was, we can get vulkan if we get marshmallow and as you told, on nougat too.
hell1134 said:
Absolutely agree with you. Once cm12 is stabilized we can hope for a marshmallow or even a nougat ROM.
Regarding the graphics, will we get vulkan support?
Click to expand...
Click to collapse
I think it will be hard work.
We've never got blob sources from xiaomi it can be impossible.
But still, just having marshmallow or nougot would be awsome...
Antutu score can be up to 80000++
---------- Post added at 06:50 AM ---------- Previous post was at 06:45 AM ----------
Can we have marshmallow which "at least" boots up?
I think it would be quite hard to boot it up with old blobs
Hi, I request the OP to add flash instructions along with which recovery to use. I know it's obvious but still.
I would personally wait for this LP ROM to get stabilized fully with all working features first. Once we have enough dev support and expertise then move to working on MM or Nougat.
I read somewhere here that if LP gets stabilized it's not very tough to get to MM?
anasahmad17 said:
Hi, I request the OP to add flash instructions along with which recovery to use. I know it's obvious but still.
I would personally wait for this LP ROM to get stabilized fully with all working features first. Once we have enough dev support and expertise then move to working on MM or Nougat.
I read somewhere here that if LP gets stabilized it's not very tough to get to MM?
Click to expand...
Click to collapse
If rom is completely source built, not very tough to bump the android version. If we use prebuilt blobs (like in this case) it may be difficult.
Bug : The in-built microphone does not seem to work.
Wow the performance is so promising. Thanks for the effort and keep it up!
11h idle, 1% battery drained. Wow I'm impressed.

Categories

Resources