Hi,
I have a problem with my A5 2017 running official nougat with magisk. I can use my fingerprint to unlock my phone easily, however when I try using my PIN/model, when I enter the right code, it just freezes until screen goes off. This was a real problem when I had to restart my phone, and it was asking me my model and I could drax it but then the screen would freeze until it went black and it was still asking me my model, and freeze etc. So i erased data/cache, but I still have that problem.
Thanks in advance
my problem is similar to this. when i try to unlock the lock screen with my pin, pw or model it takes about 5 seconds before the phone is unlocked. when i use fingerprint its unlocked instant. my A5 2017 (7.0 nougat) is rooted with magisk too. perhabs this is the problem?
in my case the problem was Magisk. I flashed my OS completely new with this instructions ( https://forum.xda-developers.com/sa...ficial-nougat-release-download-guide-t3654413 )
then i root with supersu instead of magisk and now it works !
Related
Hi,
After some hard work I finally got TWRP and LineageOS installed on my Galaxy A5. It now works properly except that when I try to turn it off, the screen becomes black for a few seconds and then it reboots.
Did anyone encountered this problem before? Do you have an idea of a possible fix?
gustavecoste said:
Hi,
After some hard work I finally got TWRP and LineageOS installed on my Galaxy A5. It now works properly except that when I try to turn it off, the screen becomes black for a few seconds and then it reboots.
Did anyone encountered this problem before? Do you have an idea of a possible fix?
Click to expand...
Click to collapse
Same problem here. Have you found a solution?
Hi,
Yes, I finally found a solution. The problem was that I was trying to install Lineage OS 14.1 (based on Android 7) on a phone where Android 8 was installed.
At that point, you have two solutions:
Install a stock version of Android 7 before flashing LineageOS
Find a version of LineageOS 15 that works on Galaxy A5.
I chose option 1 and it did work perfectly.
Thank you. I'll try that as soon as I can. (I will also choose option 1.)
When i try to install a stock version of Android 7 with Odin, it fails with this message on the phone in download mode : "SW REV. CHECK FAIL(BOOTLOADER) DEVICE: 7, BINARY: 4". Any idea ?
Hi xda forum I'm new here so nice to meet you all.
I'm currently facing issue with rooting my s9 (Exynos).
which is I was trying to root My phone with twrp and simply format data and install all the essential files
such as no-verify-opt-encrypt-6.0-star.zip, RMM Bypass, samsung anti removal 2.4 and supersu or magisk.
After I complete my installation I rebooted the system from twrp.
And I face this problem which was stuck on the samsung galaxy s9 logo and doing nothing.
I forced shut down my s9 and went to download mode to flash new firmware by odin and It cameback nicely
But everytime when I try to root with twrp like I just said my phone just bricked and stuck on the logo.
I tried it about like 4 times fo this and nothing can solve it. I can use my phone without problem without root
but I really want to root my phone are there any solution for this?? please help:crying::crying:
gkfajsl99 said:
Hi xda forum I'm new here so nice to meet you all.
I'm currently facing issue with rooting my s9 (Exynos).
which is I was trying to root My phone with twrp and simply format data and install all the essential files
such as no-verify-opt-encrypt-6.0-star.zip, RMM Bypass, samsung anti removal 2.4 and supersu or magisk.
After I complete my installation I rebooted the system from twrp.
And I face this problem which was stuck on the samsung galaxy s9 logo and doing nothing.
I forced shut down my s9 and went to download mode to flash new firmware by odin and It cameback nicely
But everytime when I try to root with twrp like I just said my phone just bricked and stuck on the logo.
I tried it about like 4 times fo this and nothing can solve it. I can use my phone without problem without root
but I really want to root my phone are there any solution for this?? please help:crying::crying:
Click to expand...
Click to collapse
Welcome to the fray!! Hopefully we can find the solution you seek, can you tell me which twrp file are you flashing?
Hy,
I root my Samsung S9 (SM-G960F on android 9 Pie) and everything is fine and working very well, but if I set lock screen (pattern, pin or password) then mobile just constantly restarts and I must over odin flash it again.
So is it posible and how can I repair it that can I set lock screen?
I root using this tutorial..
Code:
youtu.be/DsXfeOxUX_E
and used this root file for Samsung S9 SM-G960F-U7 Andoid 9 pie
Code:
firmwarebd.com/2019/12/how-to-root-samsung-galaxy-s9-all-model.html
Just dl a custom stock rom after flashing twrp
Like soldier or ultimate, problem solved in one second
Hi everyone,
Frist I have to say : my engish is bad, I'll do my best to understand and to be understandable.
Maybe someone has had the same problem as me before, but I haven't found or understood the solution.
Here it is :
After following tutorials, I installed Lineage OS (17.1 or later) on my samsung galaxy S7. But, during the first start (and all others), the lineage OS logo loads for about 3 minutes, then reboots on TWRP. I can't run the OS I want to.
When reinstalling an operator rom, it is clearly displayed that the S7 is rooted, but the OEM unlocking is locked (when I switch the button, it immediately returns to the off position, even if I wait 7 days or more without restarting the smartphone)
How can i fix it ?
Thank you for your attention
Hello,
<what SoC have you ? qualcomm or Exynos ?
Hello,
I have the G930F, Exynos I think.
I Have LG G8 bootloader unlocked(THANKS TO @cloud1250000 And @netmsm for developing innovative things , But i have serious Problem about Magisk root i.e When i try to root my lg g8 with magisk manager v8.0.7 (out dated) its working fine but we need everything in work like zygisk/Lposed so i tried latest magisk app v25.2 by simply updating through magisk app(i also tried magisk v25.2 latest after fresh FLASH n factory reset) so my LG G8 Stuck at LG G8 THINQ LOGO sometime its screen just go black at screen lock, as my PC was Detecting its storage and ADB Was working(luckily i turned it on) so i tried all cmds to recover this at last i got my phone into EDL MODE Using blind eyes bcz screen was working but no display after edl i flashed backed up boot_a/b but still same thing then(i thought original boot images must solve this issue) so finally i flashed stock rom in LG UP Which solved this issue so i again tried same magisk v25.2 and same thing happened screen goes black at lock screen so again i flashed stock rom. at last again i rooted my phone with old magisk manager v8.0.7 and now its working fine but i still want latest magisk on my phone with all latest features tell me solution.
Note:
KERNEL VER 4.14.117 LG G8 G820UM (verizon to open_us)
-> I AM USING STOCK ROM WHICH IS G820UM20J OPEN_CAN
-> I am using boot patched img from magisk and flashing it in QFIL, its working fine for old magisk manager v8.0.7 but latest magisk is not giving me display after bootup.
-> I DIDNT TRIED LOWER VERSIONS OF MAGISK BUT I CAN BUT I DONT THINK THEY WORK.
any body knows it or tell me solution?