I ported TWRP(3.02-1) for Asus live, so i decided to post it because i never saw a custom recovery for this model.
To install the custom recovery you need adb and fastboot installed on your PC, and "USB debbuging" enable in your phone.
Now go into bootloader/fastboot mode, you can get there using adb terminal with the command "adb reboot fastboot" or turn off the phone, then press and hold UP VOLUME, after pressing volume up press POWER button, hold until you see a small menu then select fastboot mode.
Now in your pc,
copy the TWRP.img to your adb folder.
Open the adb terminal and type
Code:
"fastboot flash recovery TWRP.img"
It will display a message, if it is "OKAY" you are good to go.
IF SOMETHING BAD HAPPENS
you can flash the stock recovery using the exactly same process.
Move the Recovery.img to your adb folder and type
Code:
"fastboot flash recovery Recovery.img"
TWRP recovery and stock recovery:
HTML:
https://mega.nz/#F!KEJG3ShK!l1R6t8Xbo5wACgIWC35-Dw
(if you bricked your phone, you can use the stock recovery and the command above to unbrick it)
if i committed any grammar mistakes, correct me in the comments, thanks
Related
Hello
I am following the following tutorial below to install the clockworkmod recovery but when I enter the cmd fastboot flash recovery recovery-clockwork-touch-5.8.0.0-ace.img. The cmd prompt displays the message "waiting for device" but does not do anything. Am I doing anything wrong?
1. Download and place the package file onto your Desktop.
2. Extract files from the package to your Desktop.
3. Connect your smartphone to the PC using the USB cable.
4. Double-click the Start Here.bat file to open the Command Prompt Window.
5. Enter the following command into the Command Prompt Window:
adb reboot bootloader
6. Your smartphone should reboot into the Fastboot mode.
7. Now, enter the following command into the same Command Prompt Window:
fastboot flash recovery recovery-clockwork-touch-5.8.0.0-ace.img
8. After the recovery has been installed on your smartphone, issue the following command:
fastboot reboot
9. Your smartphone should reboot.
Thank You
mfredy said:
Hello
I am following the following tutorial below to install the clockworkmod recovery but when I enter the cmd fastboot flash recovery recovery-clockwork-touch-5.8.0.0-ace.img. The cmd prompt displays the message "waiting for device" but does not do anything. Am I doing anything wrong?
1. Download and place the package file onto your Desktop.
2. Extract files from the package to your Desktop.
3. Connect your smartphone to the PC using the USB cable.
4. Double-click the Start Here.bat file to open the Command Prompt Window.
5. Enter the following command into the Command Prompt Window:
adb reboot bootloader
6. Your smartphone should reboot into the Fastboot mode.
7. Now, enter the following command into the same Command Prompt Window:
fastboot flash recovery recovery-clockwork-touch-5.8.0.0-ace.img
8. After the recovery has been installed on your smartphone, issue the following command:
fastboot reboot
9. Your smartphone should reboot.
Thank You
Click to expand...
Click to collapse
Are your drivers installed already?
bananagranola said:
Are your drivers installed already?
Click to expand...
Click to collapse
Yh, I have installed all the latest driversss
mfredy said:
Yh, I have installed all the latest driversss
Click to expand...
Click to collapse
Is your phone in debug mode?
bananagranola said:
Is your phone in debug mode?
Click to expand...
Click to collapse
yupppppppppppp
mfredy said:
yupppppppppppp
Click to expand...
Click to collapse
No idea then. Post the entire log.
mfredy said:
yupppppppppppp
Click to expand...
Click to collapse
Were your drivers installed with the phone unplugged?
-Check your data-sync cable,It should not only allow your device to charge but also data-sync.( Try with another data-sync cable)
-As you stated drivers are installed.Then when you're on bootloader,It should show HBOOT-USB. If that shows than try doing same thing again.
Or else follow simple steps below:
-Copy CWM recovery.img into fastboot files.
-Unplug your device if connected to computer.
-Manually power off your device.
-Press Volume down + Power button,It will redirect into hboot.
-Select Bootloader by clicking on power button,It will change color of HBOOT from Blue to Red.
-Next thing you'll notice that it stated as HBOOT USB.
-Put your phone on side and do same commands fastboot flash recovery recovery-clockwork-touch-5.8.0.0-ace.img
-Fastboot reboot.
Once process been done. Unplug it and boot device normally. And to check whether there's a recovery.img installed or not,Just power off your device and put on charge. In CWM it will redirect your into recovery mode while device is switched off.
4EXT Recovery Touch
Try 4EXT Recovery Update , install app , download 4EXT Recovery . Done
Hi all,
After I've installed color os 2.1.1 from sniper-joe I cannot back into my recovery.
The phone can boot on OS and in fastboot but not into recovery.
My phone still boot loop as long I press volume down. When I release the button I'm in fastboot.
Model x9006
I try to remove SD and SIM : same
I've installed different TWMP and CWM : same
I've got some issue with 2.1.1 and want to go back to 2.0.8 but cannot
Mine has too after installing the official Lollipop, any help? Lollipop was buggy for me so I'd like to unbrick my Oppo.
So plug in phone AFTER booting into Fastboot mode (power+volume up) then open a command window by pushing shift and right clicking anywhere that the platform-tools folder is and then type fastboot devices and hit enter and then type fastboot oem unlock and hit enter and then fastboot flash recovery recovery.img or whatever the name of your rcovery is then just power+volume down and boot into the recovery. It helped me!
droidiam said:
Mine has too after installing the official Lollipop, any help? Lollipop was buggy for me so I'd like to unbrick my Oppo.
So plug in phone AFTER booting into Fastboot mode (power+volume up) then open a command window by pushing shift and right clicking anywhere that the platform-tools folder is and then type fastboot devices and hit enter and then type fastboot oem unlock and hit enter and then fastboot flash recovery recovery.img or whatever the name of your rcovery is then just power+volume down and boot into the recovery. It helped me!
Click to expand...
Click to collapse
You need one of these recoveries if you own a R63419 LCD (newer find 7 have this model) - For me the first was OK :
forum.xda-developers.com
/find-7/find7-development/x9076-r63419-lcd-recoveries-t3049886
Today I flash 3.5.2 os.. and i lost my Twrp.. ?
i used toolkit to flash twrp but my toolking say my device not connect.. no device status.. so i can't flash twrp...
any other way to flash twrp??
my windows 8.1
Download this version of twrp and flash.
http://forum.xda-developers.com/oneplus-3/how-to/oos-3-5-2-comunity-build-t3461648/post68691560
Old twrp/stock recovery builds won't work on oos 3.5.2.
Anyway, install adb and fastboot drivers properly.
Don't forget to put usb debugging on in developer option
zTweaked said:
Download this version of twrp and flash.
http://forum.xda-developers.com/oneplus-3/how-to/oos-3-5-2-comunity-build-t3461648/post68691560
Old twrp/stock recovery builds won't work on oos 3.5.2.
Anyway, install adb and fastboot drivers properly.
Click to expand...
Click to collapse
Bro any vedio tutorial about it?
Nilshalok said:
Bro any vedio tutorial about it?
Click to expand...
Click to collapse
Install adb and fastboot drivers properly. Turn on usb debugging. Flash recovery by typing fastboot flash recovery recovery_name.img
You shouldn't need a video tutorial for that.
zTweaked said:
Install adb and fastboot drivers properly. Turn on usb debugging. Flash recovery by typing fastboot flash recovery recovery_name.img
You shouldn't need a video tutorial for that.
Click to expand...
Click to collapse
i am new here and i can't get anything what you all say.. plz help brother...? make a lil video for me.. plz plz
Nilshalok said:
i am new here and i can't get anything what you all say.. plz help brother...? make a lil video for me.. plz plz
Click to expand...
Click to collapse
• Install this http://forum.xda-developers.com/showthread.php?p=48915118#post48915118
Also install the oneplus fastboot drivers. You'll see the setup file when you connect your phone to your pc.
•Then turn on usb debugging from developer options on your phone and connect it to your pc. Keep the screen unlocked.
•Open command prompt by typing cmd in the search box in the start menu of your pc. Type "adb shell" without the inverted commas and hit enter. You'll see a popup on your phone. You'll see a checkbox, check it and hit the confirm button.
•Download the twrp recovery from the link I shared before. Extract the zip and rename the img file to twrp.img
•Now reboot your phone into fastboot mode. To do that, first turn on "advanced reboot" from developer options.
•Then press and hold power button to open the power menu. Select reboot > bootloader.
•Your phone will disconnect and reconnect automatically once it boots into bootloader.
•Now press shift + right click in the folder where you have kept your twrp.img and select "open command window here"
•Once cmd opens, type in "fastboot devices" without the inverted commas and hit enter.
You'll see something like this: abc123 fastboot
(If cmd doesn't return you with anything like this after hitting enter then install fastboot drivers again properly and try again)
•Once you see that, type in "fastboot flash recovery twrp.img" without the inverted commas and hit enter.
•You'll see the success result. Then type "fastboot boot twrp.img" without the inverted commas and hit enter to boot into twrp.
zTweaked said:
• Install this http://forum.xda-developers.com/showthread.php?p=48915118#post48915118
Also install the oneplus fastboot drivers. You'll see the setup file when you connect your phone to your pc.
•Then turn on usb debugging from developer options on your phone and connect it to your pc. Keep the screen unlocked.
•Open command prompt by typing cmd in the search box in the start menu of your pc. Type "adb shell" without the inverted commas and hit enter. You'll see a popup on your phone. You'll see a checkbox, check it and hit the confirm button.
•Download the twrp recovery from the link I shared before. Extract the zip and rename the img file to twrp.img
•Now reboot your phone into fastboot mode. To do that, first turn on "advanced reboot" from developer options.
•Then press and hold power button to open the power menu. Select reboot > bootloader.
•Your phone will disconnect and reconnect automatically once it boots into bootloader.
•Now press shift + right click in the folder where you have kept your twrp.img and select "open command window here"
•Once cmd opens, type in "fastboot devices" without the inverted commas and hit enter.
You'll see something like this: abc123 fastboot
(If cmd doesn't return you with anything like this after hitting enter then install fastboot drivers again properly and try again)
•Once you see that, type in "fastboot flash recovery twrp.img" without the inverted commas and hit enter.
•You'll see the success result. Then type "fastboot boot twrp.img" without the inverted commas and hit enter to boot into twrp.
Click to expand...
Click to collapse
thanks i will try it next day sir
Hello guys,
After doing oem unlock with fastboot ,i've tried to flash TWRP recovery but after the comand i cannot acess recovery, it just reboots. Tried several recovery images and read alot of toturials but with no sucess!! Win10 64bits computer here.
Thanks,
NightSource
Nightsource said:
Hello guys,
After doing oem unlock with fastboot ,i've tried to flash TWRP recovery but after the comand i cannot acess recovery, it just reboots. Tried several recovery images and read alot of toturials but with no sucess!! Win10 64bits computer here.
Thanks,
NightSource
Click to expand...
Click to collapse
Did you hold the volume down button + power button to get to recovery mode manually right after flashing?
Gesendet von meinem ONEPLUS A3003 mit Tapatalk
If you have successfully unlocked the bootloader, you'll get a bootloader unlocked warning every time you boot. On the warning screen, click either of the volume buttons and you'll be redirected to a bootup menu. From there, you can select "boot to recovery" using the volume rocker and power button.
Alternatively, enable "advanced reboot" in developer options and reboot to recovery from the main OS power menu.
If these don't work, reflash TWRP using fastboot. Make sure that you're using at least version 3.0.3-1, best to use 3.0.4-1.
Tried manually reboot into recovery but it just reboots,
I can sucessfully unlock as i have the warning on boot, but there if i go to the menu and press for recovery it just reboots, tried several tipes of recovery TWRP imgs
Any help greatly wanted
Download this version of TWRP (jcadduono's 4.0.3-1). Rename the file to something like twrp.img.
1) Make sure adb/fastboot is working on your computer (if you've already unlocked the bootloader, then I am assuming it is).
2) Put your phone into fastboot mode and connect it to your computer. Open a command prompt where you can access fastboot.
3) Put the twrp.img file to the same folder where you opened your command prompt.
3) Enter
Code:
fastboot devices
in fastboot and make sure your phone shows up with its serial number.
4) Enter
Code:
fastboot erase recovery
to erase your current recovery
5) Enter
Code:
fastboot flash recovery [B]twrp.img[/B]
, where twrp.img is whatever you named your twrp file.
6) Enter
Code:
fastboot reboot
to reboot into your main system. You can either reboot then use advanced startup to enter recovery, or press a volume button at the bootloader warning page to boot directly to recovery.
Anova's Origin said:
Download this version of TWRP (jcadduono's 4.0.3-1). Rename the file to something like twrp.img.
1) Make sure adb/fastboot is working on your computer (if you've already unlocked the bootloader, then I am assuming it is).
2) Put your phone into fastboot mode and connect it to your computer. Open a command prompt where you can access fastboot.
3) Put the twrp.img file to the same folder where you opened your command prompt.
3) Enter
Code:
fastboot devices
in fastboot and make sure your phone shows up with its serial number.
4) Enter
Code:
fastboot erase recovery
to erase your current recovery
5) Enter
Code:
fastboot flash recovery [B]twrp.img[/B]
, where twrp.img is whatever you named your twrp file.
6) Enter
Code:
fastboot reboot
to reboot into your main system. You can either reboot then use advanced startup to enter recovery, or press a volume button at the bootloader warning page to boot directly to recovery.
Click to expand...
Click to collapse
Sometimes it helps to use fastboot to boot the image directly after you flash it. This ensures you get into recovery since it loads it off your computer.
It should then work normally afterwards
Sent from my ONEPLUS A3000 using Tapatalk
Hello,
I went to flash the firmware with global rom with mi flash tool and i get flash crc list error, and now i cant get out of fastboot. I've tried holding down power button to rebot, and fastboot comes up every time, and xiaomi tool wont recognize my phone. I can boot into recovery, but that doesn't seem to help when i try and boot to system. I can't get out of fastboot mode! Any help is appreciated.
Thank you
You can try sideloading the stock ROM. Download the ROM zip from the Xiaomi website and put the zip file in the folder with the adb/fastboot tools on your computer. While the phone is in fastboot connect it to your computer. Open a command prompt window from within your adb/fastboot folder by holding down the shift key and pressing the right mouse button. Type the command fastboot devices to see if your computer recognizes your phone. (If you have a power shell window instead of a command prompt window all commands need to begin with "./" not including the quotes). If your computer recognizes your phone the command is: adb sideload filename.zip (which is the ROM file you want to sideload).
I've had success doing this with other phones but never tried sideloading on a Xiaomi phone. It's possible Xiaomi phones don't recognize the sideload command.
Good luck.
I ran into similar situation this week, the xiaomi phone is stuck in fastboot mode. And in this mode, all the adb command won't work, it can't connect with the phone. but fastboot devices can see the phone. So "adb sideload xxx.zip" won't work for me now. with only fastboot commands, can I still push the rom files in?