Hello guys,
After doing oem unlock with fastboot ,i've tried to flash TWRP recovery but after the comand i cannot acess recovery, it just reboots. Tried several recovery images and read alot of toturials but with no sucess!! Win10 64bits computer here.
Thanks,
NightSource
Nightsource said:
Hello guys,
After doing oem unlock with fastboot ,i've tried to flash TWRP recovery but after the comand i cannot acess recovery, it just reboots. Tried several recovery images and read alot of toturials but with no sucess!! Win10 64bits computer here.
Thanks,
NightSource
Click to expand...
Click to collapse
Did you hold the volume down button + power button to get to recovery mode manually right after flashing?
Gesendet von meinem ONEPLUS A3003 mit Tapatalk
If you have successfully unlocked the bootloader, you'll get a bootloader unlocked warning every time you boot. On the warning screen, click either of the volume buttons and you'll be redirected to a bootup menu. From there, you can select "boot to recovery" using the volume rocker and power button.
Alternatively, enable "advanced reboot" in developer options and reboot to recovery from the main OS power menu.
If these don't work, reflash TWRP using fastboot. Make sure that you're using at least version 3.0.3-1, best to use 3.0.4-1.
Tried manually reboot into recovery but it just reboots,
I can sucessfully unlock as i have the warning on boot, but there if i go to the menu and press for recovery it just reboots, tried several tipes of recovery TWRP imgs
Any help greatly wanted
Download this version of TWRP (jcadduono's 4.0.3-1). Rename the file to something like twrp.img.
1) Make sure adb/fastboot is working on your computer (if you've already unlocked the bootloader, then I am assuming it is).
2) Put your phone into fastboot mode and connect it to your computer. Open a command prompt where you can access fastboot.
3) Put the twrp.img file to the same folder where you opened your command prompt.
3) Enter
Code:
fastboot devices
in fastboot and make sure your phone shows up with its serial number.
4) Enter
Code:
fastboot erase recovery
to erase your current recovery
5) Enter
Code:
fastboot flash recovery [B]twrp.img[/B]
, where twrp.img is whatever you named your twrp file.
6) Enter
Code:
fastboot reboot
to reboot into your main system. You can either reboot then use advanced startup to enter recovery, or press a volume button at the bootloader warning page to boot directly to recovery.
Anova's Origin said:
Download this version of TWRP (jcadduono's 4.0.3-1). Rename the file to something like twrp.img.
1) Make sure adb/fastboot is working on your computer (if you've already unlocked the bootloader, then I am assuming it is).
2) Put your phone into fastboot mode and connect it to your computer. Open a command prompt where you can access fastboot.
3) Put the twrp.img file to the same folder where you opened your command prompt.
3) Enter
Code:
fastboot devices
in fastboot and make sure your phone shows up with its serial number.
4) Enter
Code:
fastboot erase recovery
to erase your current recovery
5) Enter
Code:
fastboot flash recovery [B]twrp.img[/B]
, where twrp.img is whatever you named your twrp file.
6) Enter
Code:
fastboot reboot
to reboot into your main system. You can either reboot then use advanced startup to enter recovery, or press a volume button at the bootloader warning page to boot directly to recovery.
Click to expand...
Click to collapse
Sometimes it helps to use fastboot to boot the image directly after you flash it. This ensures you get into recovery since it loads it off your computer.
It should then work normally afterwards
Sent from my ONEPLUS A3000 using Tapatalk
Please help me to delete this post. i find a guide in my language. thank
Dear fellows,
please help me this case.
My zf2 550ml is in android 5.0.
i tried to flash MMbootloader <https://forum.xda-developers.com/showpost.php?p=68806518&postcount=117> to up 6.0 rom. After that, i lost the recovery, cannot access by hold power and Vol +.
Turn off the phone and on again, there is no boot screen or logo. The phone can still boot to android and work normally and still see my phone in adb devices.
Thank.
demonntl said:
Please help me to delete this post. i find a guide in my language. thank
Dear fellows,
please help me this case.
My zf2 550ml is in android 5.0.
i tried to flash MMbootloader <https://forum.xda-developers.com/showpost.php?p=68806518&postcount=117> to up 6.0 rom. After that, i lost the recovery, cannot access by hold power and Vol +.
Turn off the phone and on again, there is no boot screen or logo. The phone can still boot to android and work normally and still see my phone in adb devices.
Thank.
Click to expand...
Click to collapse
what every firmware you are currently on.. extract firmware zip file and copy ifwi, recovery, boot, droidboot, splashscreen images and paste those images in adb fastboot toll folder
now in adb fastboot tool folder move your cursor to and empty place hold shift and right click. find option open command windows here. now run following commands
fastboot devices ( to see if device recognized)
fastboot flash splashscreen splashscreen.img
fastboot flash ifwi ifwifilename
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash fastboot droidboot.img
fastboot reboot bootloader
now use volume button to find recovery mode option. click power button to enter recovery. you will enter recovery
( note: if you see an error screen with android logo. at that screen click and hold power button and then click volume plus and release power button you will enter recovery)
I ported TWRP(3.02-1) for Asus live, so i decided to post it because i never saw a custom recovery for this model.
To install the custom recovery you need adb and fastboot installed on your PC, and "USB debbuging" enable in your phone.
Now go into bootloader/fastboot mode, you can get there using adb terminal with the command "adb reboot fastboot" or turn off the phone, then press and hold UP VOLUME, after pressing volume up press POWER button, hold until you see a small menu then select fastboot mode.
Now in your pc,
copy the TWRP.img to your adb folder.
Open the adb terminal and type
Code:
"fastboot flash recovery TWRP.img"
It will display a message, if it is "OKAY" you are good to go.
IF SOMETHING BAD HAPPENS
you can flash the stock recovery using the exactly same process.
Move the Recovery.img to your adb folder and type
Code:
"fastboot flash recovery Recovery.img"
TWRP recovery and stock recovery:
HTML:
https://mega.nz/#F!KEJG3ShK!l1R6t8Xbo5wACgIWC35-Dw
(if you bricked your phone, you can use the stock recovery and the command above to unbrick it)
if i committed any grammar mistakes, correct me in the comments, thanks
im stuck in a boot loop but can give a one or two commnds from adb for about 10 seconds befor it restarts from twrp i need a command to hopefully boot into erecovery please any help is duely noted or if i can maby flash a new recovery real quick in twrp from adb command
NO.
Since you said twrp recovery.. I assume bootloader is unlocked..
Boot into fastboot mode by holding volume down and power and connect to pc
Or
hold volume down key in power off mode and connect to pc and release until fastboot mode is loaded
Use
fastboot flash recovery_ramdisk ___ . Img to flash recovery if os is oreo
Replace ___ with the recovery file name
Fastboot flash recovery recovery. Ing to flash recovery if os is noughat
Steps to recover from bootloop or soft brick
Method 1:
1. Download and paste the ozip file for realme 3 to sd card from here:
https://www.realme.com/in/support/software-update
2. Insert SD card in your soft bricked phone
3. Power off your phone by pressing power button for sometime
4.
a. If you have stock recovery then do this step:
Press power button + vol down, it should boot into recovery. If it boots into fastboot mode, you have to do:
fastboot oem reboot-recovery (to boot into recovery).
or
b. If you have TWRP or no recovery at all, then do this step:
Press power button + vol down to boot into fastboot mode.
If it's in endless bootloop, Hold vol up + power till the screen becomes blank, now release the button immediately, now press power + vol down to boot to fastboot mode and now flash stock recovery using:
fastboot flash recovery recovery.img
fastboot oem reboot-recovery
5. Flash the ozip file in sd card using stock recovery and after that wipe the data (full)
6. Reboot
Method 2:
1. Boot to fastboot by powering off your device and then pressing power button + vol down.
If it's in endless bootloop, Hold vol up + power till the screen becomes blank, now release the button immediately, now press power + vol down to boot to fastboot mode
2. Commands to execute:
fastboot -w
fastboot erase para
3. Boot to TWRP by:
fastboot oem reboot-recovery
if you don't have twrp, get it from here: https://forum.xda-developers.com/realme-3/development/screen-doesnt-twrp-realme-3-t3944022
4. Restore the TWRP backup ,except preloader_a and preloader_b partitions and reboot
Links:
Stock recovery : https://www.androidfilehost.com/?fid=1395089523397966781 (extract using 7zip and flash recovery.img using above commands)
ADB Installer tool: https://forum.xda-developers.com/android/general/tool-adb-fastboot-installer-tool-windows-t3999445
Why when I download ozip I always get different md5 checksum? I tried different download manager and I always get different md5 checksum. Anyone has a mirror of any ozip file?
doesn't install stock recovery
When i install stock recovery and reboot to recovery it doesnt show anything and boot to system .That's why i cant install stock rom .i intsalled stock image too but get stuck on realme logo .But if i install twrp it works fine . Device rmx1825 . current rom:aosp gsi(buggy buggy buggy)
fawazahmed0 said:
Steps to recover from bootloop or soft brick
Method 1:
1. Download and paste the ozip file for realme 3 to sd card from here:
https://www.realme.com/in/support/software-update
2. Insert SD card in your soft bricked phone
3. Power off your phone by pressing power button for sometime
4.
a. If you have stock recovery then do this step:
Press power button + vol down, it should boot into recovery. If it boots into fastboot mode, you have to do:
fastboot oem reboot-recovery (to boot into recovery).
or
b. If you have TWRP or no recovery at all, then do this step:
Press power button + vol down to boot into fastboot mode.
If it's in endless bootloop, Hold vol up + power till the screen becomes blank, now release the button immediately, now press power + vol down to boot to fastboot mode and now flash stock recovery using:
fastboot flash recovery recovery.img
fastboot oem reboot-recovery
5. Flash the ozip file in sd card using stock recovery and after that wipe the data (full)
6. Reboot
Method 2:
1. Boot to fastboot by powering off your device and then pressing power button + vol down.
If it's in endless bootloop, Hold vol up + power till the screen becomes blank, now release the button immediately, now press power + vol down to boot to fastboot mode
2. Commands to execute:
fastboot -w
fastboot erase para
3. Boot to TWRP by:
fastboot oem reboot-recovery
if you don't have twrp, get it from here: https://forum.xda-developers.com/realme-3/development/screen-doesnt-twrp-realme-3-t3944022
4. Restore the TWRP backup ,except preloader_a and preloader_b partitions and reboot
Links:
Stock recovery : https://www.androidfilehost.com/?fid=1395089523397966781 (extract using 7zip and flash recovery.img using above commands)
Click to expand...
Click to collapse
Please help !! My RMX1821 still cant boot to stock recovery after i flash the stock recovery.img. Please Helpp !!!
my device not booting into fastboot mode.. others is ok
phone is not going in to recovery mode
my device is in infinity boot loop mode. it was on everything stock mode.
right now i cant even boot into recovery mode or fastboot mode.
plz help me guys.
Problem regarding realme 3
Problem regarding realme 3 as my device is showing error of charging overtime and telling to contact realme. It happened when I relocked the bootloader, as I unlocked my bootloader yesterday and today I tried to root it using magisk_patched.img file and it showed error and therefore I relocked my bootloader and after that it showed the problem. And I added the ozip file in sd card and tried to recover it using color os recovery using install from storage device, but there from sd card option is not showing and I am not able to use my mobile phone and its urgent, please help me.
fawazahmed0 said:
Steps to recover from bootloop or soft brick
Method 1:
1. Download and paste the ozip file for realme 3 to sd card from here:
https://www.realme.com/in/support/software-update
2. Insert SD card in your soft bricked phone
3. Power off your phone by pressing power button for sometime
4.
a. If you have stock recovery then do this step:
Press power button + vol down, it should boot into recovery. If it boots into fastboot mode, you have to do:
fastboot oem reboot-recovery (to boot into recovery).
or
b. If you have TWRP or no recovery at all, then do this step:
Press power button + vol down to boot into fastboot mode.
If it's in endless bootloop, Hold vol up + power till the screen becomes blank, now release the button immediately, now press power + vol down to boot to fastboot mode and now flash stock recovery using:
fastboot flash recovery recovery.img
fastboot oem reboot-recovery
5. Flash the ozip file in sd card using stock recovery and after that wipe the data (full)
6. Reboot
Method 2:
1. Boot to fastboot by powering off your device and then pressing power button + vol down.
If it's in endless bootloop, Hold vol up + power till the screen becomes blank, now release the button immediately, now press power + vol down to boot to fastboot mode
2. Commands to execute:
fastboot -w
fastboot erase para
3. Boot to TWRP by:
fastboot oem reboot-recovery
if you don't have twrp, get it from here: https://forum.xda-developers.com/realme-3/development/screen-doesnt-twrp-realme-3-t3944022
4. Restore the TWRP backup ,except preloader_a and preloader_b partitions and reboot
Links:
Stock recovery : https://www.androidfilehost.com/?fid=1395089523397966781 (extract using 7zip and flash recovery.img using above commands)
ADB Installer tool: https://forum.xda-developers.com/android/general/tool-adb-fastboot-installer-tool-windows-t3999445
Click to expand...
Click to collapse
Parmardada said:
my device is in infinity boot loop mode. it was on everything stock mode.
right now i cant even boot into recovery mode or fastboot mode.
plz help me guys.
Click to expand...
Click to collapse
this also happen on my realme 3, do you found the solution yet?
I'm desperate to fix mine.
MNaikSwalayan said:
this also happen on my realme 3, do you found the solution yet?
I'm desperate to fix mine.
Click to expand...
Click to collapse
this happens to my realme 3 pro too.. any help?
anyone got the solution i am also stuck not connecting to pc not going into fastboot too
i need help
my device have unlocked bootloader
and flashing custom recovery but only 1 time to enter recovery ,, after that recovery has gone...
and i receive notifacation for update so i'm download the update .. but went something wrong with update ,,,
i stuck at logo with infity bootloop,, it say recovery mode which is disappear it self ,, and i cannot go to fastboot mode to reboot system,,,
what should i do?
najam489 said:
anyone got the solution i am also stuck not connecting to pc not going into fastboot too
Click to expand...
Click to collapse
please let me know I you find the solution
no recovery mode
question sir, it possible to fix if realme recovery mode can't access or not contenuing to boot on recovery mode? do u have any way to flash a rom even without recovery mode?
thanks for reply ?
Were all the same problems facing rightnow. I recently flash the stock recovery and it turn to endless bootloop. Does one of us already fix the issue ? I can't boot to fastboot.
Theres only one left chance of reviving damage of phone software. JTAG is the best option . But JTAG is expensive. Better go to nearest cellphone shop and pay their fees.
Realme 3 bootloop. Can't turn off, Recovery mode, Fastboot.
My device RMX 1821...(RUI C.16)
After flash custome Rom Bliss device is good...
But i have problem after flashing magisk my device bootloop on logo...i try to reboot recovery cant be acess ...
Just come to fastboot mode.
Try to install again the recovery "error' cant load partition ,
I try to flashing by Realme flash tool ...
Error' with Cant load system' image ( getvar variable not found)
Any solution please for my phone....
Very kindly to be help me...
charlis88 said:
My device RMX 1821...(RUI C.16)
After flash custome Rom Bliss device is good...
But i have problem after flashing magisk my device bootloop on logo...i try to reboot recovery cant be acess ...
Just come to fastboot mode.
Try to install again the recovery "error' cant load partition ,
I try to flashing by Realme flash tool ...
Error' with Cant load system' image ( getvar variable not found)
Any solution please for my phone....
Very kindly to be help me...
Click to expand...
Click to collapse
Me also
fawazahmed0 said:
Steps to recover from bootloop or soft brick
Method 1:
1. Download and paste the ozip file for realme 3 to sd card from here:
https://www.realme.com/in/support/software-update
2. Insert SD card in your soft bricked phone
3. Power off your phone by pressing power button for sometime
4.
a. If you have stock recovery then do this step:
Press power button + vol down, it should boot into recovery. If it boots into fastboot mode, you have to do:
fastboot oem reboot-recovery (to boot into recovery).
or
b. If you have TWRP or no recovery at all, then do this step:
Press power button + vol down to boot into fastboot mode.
If it's in endless bootloop, Hold vol up + power till the screen becomes blank, now release the button immediately, now press power + vol down to boot to fastboot mode and now flash stock recovery using:
fastboot flash recovery recovery.img
fastboot oem reboot-recovery
5. Flash the ozip file in sd card using stock recovery and after that wipe the data (full)
6. Reboot
Method 2:
1. Boot to fastboot by powering off your device and then pressing power button + vol down.
If it's in endless bootloop, Hold vol up + power till the screen becomes blank, now release the button immediately, now press power + vol down to boot to fastboot mode
2. Commands to execute:
fastboot -w
fastboot erase para
3. Boot to TWRP by:
fastboot oem reboot-recovery
if you don't have twrp, get it from here: https://forum.xda-developers.com/realme-3/development/screen-doesnt-twrp-realme-3-t3944022
4. Restore the TWRP backup ,except preloader_a and preloader_b partitions and reboot
Links:
Stock recovery : https://www.androidfilehost.com/?fid=1395089523397966781 (extract using 7zip and flash recovery.img using above commands)
ADB Installer tool: https://forum.xda-developers.com/android/general/tool-adb-fastboot-installer-tool-windows-t3999445
Click to expand...
Click to collapse
my realme 3 pro devise is stucked in twrp and bootloader after i flashed a wrong rom and after flashing the corrext rom also , its stucked..pls help
Can anyone give the link of recovery.img because in stock rom which i downloaded there isn't any recovery.img please help...... My stock rom is up to date