Develop Bugs

[Q] Ouya will not boot anymore (blackscreen)

While i was trying to do adb in cmd in windows and had more than one device and emulator error and i tryed closing the process and turning off system to fix error.Then when i booted up system it gives black screen i tryed several things.

This might unbrick if you can do it
blessy said:
While i was trying to do adb in cmd in windows and had more than one device and emulator error and i tryed closing the process and turning off system to fix error.Then when i booted up system it gives black screen i tryed several things.
Click to expand...
Click to collapse
Are you able to get the device into fastboot if you have adb showing working in the windows device manager if your on windows when you switch it on and it's at the black screen?
If so go to android sdk hang over the platform-tools folder within and right click it and select open a command window here,now get hold of ouyatoolbox 1.0.0.0 or another version of this tool,now go back to command and then type adb reboot bootloader and hit enter,check to see if you have fastboot pop up in windows device manager now, and if it shows yellow the best i can say is get it working asap. Then go to ouyatoolbox and click install CWM Recovery it should bring you to the recovery,you then go to install from zip then to install zip via adb option and download an ota firmware file from the net on your pc one that matches the firmware you had before on your ouya, then drop he download into android sdk/ platform-tools folder as a zip file as it came downloaded,go to the open command window you opened from platform-tools and type in adb sideload (name of the ota firmware zip file ) hit enter,this should unbrick it by installing the ouya system firmware from the file,if not then go back to the ouya recovery by turning off the ouya and press power then hold in alt+printscreen & every 2 seconds press i until clockworkmod recovery appears or an ! press home button then,if your in adroid system recovery 3e try to adb sideload the firmware,if not working it means clockworkmod didn't install and you must try again because built in recovery is not functioning with sideload firmware option,so if your in the clockworkmod menu just click these factory data reset then erase cache then go to advanced and click erase then click erase dalvik cache then click install from zip then go to install zip via adb option click that and try type adb sideload (name of the ota zip file)in command window you opened from platform-tools and hit enter,this should apply the update and unbrick the console.
If not then there is something more wrong than just the firmware at a guess,sorry if the guide is a bit poor but it's the best i can do.

[How To]Huawei P6 QUICK INSTALL TWRP/QUICK SWITCH BETWEEN TWRP AND ORIGINAL RECOVERY

ATTENTION!!! YOU MUST HAVE KITKAT ROM ALREADY INSTALLED
IT'S REALY EASY...
First of all, you need this:
- PC
- KitKat ROM already installed in your phone
- DEVELOPER OPTIONS ACTIVATED in phone (to activate developer options, go to: settings--->about phone--->build number ..and click 10 times on it to activate)
- USB DEBUGGING activated from DEVELOPER OPTIONS in phone(located in SETTINGS)
- DOWNLOAD FOR PC:
this
http://www.oracle.com/technetwork/java/javase/downloads/jre8-downloads-2133155.html (CHOOSE YOUR OPERATING SYSTEM, DOWNLOAD AND JUST INSTALL IT WITHOUT OPENING)
and MOST IMPORTANT this
https://mega.co.nz/#!4tNlnQTB!12IdfXdhGyYwwP1ULwDk-vDUgJvnKn-rpmffAyQNPOg
- EXTRACT downloaded adb.zip to your PC (the best location is in C:...and you will have C:/ adb
LET'S START:
Make sure that USB DEBUGGING in your phone IS CHECKED!! CONNECT YOUR PHONE TO PC.
1. open C:/adb and double click on ADB.exe and after that FASTBOOT.exe (you will see short appearance for a moment of black window in both cases)
2 in opened C:/adb folder, hold SHIFT and press RIGHT CLICK somewhere on blank space and you will see OPEN COMMAND WINDOW HERE...click on it.
3. black command window appears: inside the window
FOR ENABLE TWRP 2.7.0.0 RECOVERY type (or copy text) from below WITHOUT QUOTES:
"adb reboot bootloader" PRESS ENTER (YOU WILL SEE YOUR PHONE ENTERING IN FASTBOOT - HUAWEI LOGO)
"fastboot flash recovery openrecovery-twrp-2.7.0.0.img" PRESS ENTER (IN FEW SECONDS TWRP WILL BE INSTALLED)
"fastboot reboot" PRESS ENTER (PHONE WILL REBOOT)
FOR ENABLE ORIGINAL RECOVERY type (or copy text) from below WITHOUT QUOTES:
"adb reboot bootloader" PRESS ENTER
"fastboot flash recovery recovery.img" PRESS ENTER
"fastboot reboot" PRESS ENTER
THAT'S ALL FOLKS!

mlsvcbbn said:
ATTENTION!!! YOU MUST HAVE KITKAT ROM ALREADY INSTALLED
IT'S REALY EASY...
First of all, you need this:
- PC
- KitKat ROM already installed in your phone
- DEVELOPER OPTIONS ACTIVATED in phone (to activate developer options, go to: settings--->about phone--->build number ..and click 10 times on it to activate)
- USB DEBUGGING activated from DEVELOPER OPTIONS in phone(located in SETTINGS)
- DOWNLOAD FOR PC:
this
http://www.oracle.com/technetwork/java/javase/downloads/jre8-downloads-2133155.html (CHOOSE YOUR OPERATING SYSTEM, DOWNLOAD AND JUST INSTALL IT WITHOUT OPENING)
and MOST IMPORTANT this
https://mega.co.nz/#!4tNlnQTB!12IdfXdhGyYwwP1ULwDk-vDUgJvnKn-rpmffAyQNPOg
- EXTRACT downloaded adb.zip to your PC (the best location is in C:...and you will have C:/ adb
LET'S START:
Make sure that USB DEBUGGING in your phone IS CHECKED!! CONNECT YOUR PHONE TO PC.
1. open C:/adb and double click on ADB.exe and after that FASTBOOT.exe (you will see short appearance for a moment of black window in both cases)
2 in opened C:/adb folder, hold SHIFT and press RIGHT CLICK somewhere on blank space and you will see OPEN COMMAND WINDOW HERE...click on it.
3. black command window appears: inside the window
FOR ENABLE TWRP 2.7.0.0 RECOVERY type (or copy text) from below WITHOUT QUOTES:
"adb reboot bootloader" PRESS ENTER (YOU WILL SEE YOUR PHONE ENTERING IN FASTBOOT - HUAWEI LOGO)
"fastboot flash recovery openrecovery-twrp-2.7.0.0.img" PRESS ENTER (IN FEW SECONDS TWRP WILL BE INSTALLED)
"fastboot reboot" PRESS ENTER (PHONE WILL REBOOT)
FOR ENABLE CUSTOM RECOVERY type (or copy text) from below WITHOUT QUOTES:
"adb reboot bootloader" PRESS ENTER
"fastboot flash recovery recovery.img" PRESS ENTER
"fastboot reboot" PRESS ENTER
THAT'S ALL FOLKS!
Click to expand...
Click to collapse
After enable custom recovery, I have to flash with fastboot my custome recovery and boot in recovery mode to run it?

How to flash Twrp On 3.5.2

Today I flash 3.5.2 os.. and i lost my Twrp.. ?
i used toolkit to flash twrp but my toolking say my device not connect.. no device status.. so i can't flash twrp...
any other way to flash twrp??
my windows 8.1

Download this version of twrp and flash.
http://forum.xda-developers.com/oneplus-3/how-to/oos-3-5-2-comunity-build-t3461648/post68691560
Old twrp/stock recovery builds won't work on oos 3.5.2.
Anyway, install adb and fastboot drivers properly.

Don't forget to put usb debugging on in developer option

zTweaked said:
Download this version of twrp and flash.
http://forum.xda-developers.com/oneplus-3/how-to/oos-3-5-2-comunity-build-t3461648/post68691560
Old twrp/stock recovery builds won't work on oos 3.5.2.
Anyway, install adb and fastboot drivers properly.
Click to expand...
Click to collapse
Bro any vedio tutorial about it?

Nilshalok said:
Bro any vedio tutorial about it?
Click to expand...
Click to collapse
Install adb and fastboot drivers properly. Turn on usb debugging. Flash recovery by typing fastboot flash recovery recovery_name.img
You shouldn't need a video tutorial for that.

zTweaked said:
Install adb and fastboot drivers properly. Turn on usb debugging. Flash recovery by typing fastboot flash recovery recovery_name.img
You shouldn't need a video tutorial for that.
Click to expand...
Click to collapse
i am new here and i can't get anything what you all say.. plz help brother...? make a lil video for me.. plz plz

Nilshalok said:
i am new here and i can't get anything what you all say.. plz help brother...? make a lil video for me.. plz plz
Click to expand...
Click to collapse
• Install this http://forum.xda-developers.com/showthread.php?p=48915118#post48915118
Also install the oneplus fastboot drivers. You'll see the setup file when you connect your phone to your pc.
•Then turn on usb debugging from developer options on your phone and connect it to your pc. Keep the screen unlocked.
•Open command prompt by typing cmd in the search box in the start menu of your pc. Type "adb shell" without the inverted commas and hit enter. You'll see a popup on your phone. You'll see a checkbox, check it and hit the confirm button.
•Download the twrp recovery from the link I shared before. Extract the zip and rename the img file to twrp.img
•Now reboot your phone into fastboot mode. To do that, first turn on "advanced reboot" from developer options.
•Then press and hold power button to open the power menu. Select reboot > bootloader.
•Your phone will disconnect and reconnect automatically once it boots into bootloader.
•Now press shift + right click in the folder where you have kept your twrp.img and select "open command window here"
•Once cmd opens, type in "fastboot devices" without the inverted commas and hit enter.
You'll see something like this: abc123 fastboot
(If cmd doesn't return you with anything like this after hitting enter then install fastboot drivers again properly and try again)
•Once you see that, type in "fastboot flash recovery twrp.img" without the inverted commas and hit enter.
•You'll see the success result. Then type "fastboot boot twrp.img" without the inverted commas and hit enter to boot into twrp.

zTweaked said:
• Install this http://forum.xda-developers.com/showthread.php?p=48915118#post48915118
Also install the oneplus fastboot drivers. You'll see the setup file when you connect your phone to your pc.
•Then turn on usb debugging from developer options on your phone and connect it to your pc. Keep the screen unlocked.
•Open command prompt by typing cmd in the search box in the start menu of your pc. Type "adb shell" without the inverted commas and hit enter. You'll see a popup on your phone. You'll see a checkbox, check it and hit the confirm button.
•Download the twrp recovery from the link I shared before. Extract the zip and rename the img file to twrp.img
•Now reboot your phone into fastboot mode. To do that, first turn on "advanced reboot" from developer options.
•Then press and hold power button to open the power menu. Select reboot > bootloader.
•Your phone will disconnect and reconnect automatically once it boots into bootloader.
•Now press shift + right click in the folder where you have kept your twrp.img and select "open command window here"
•Once cmd opens, type in "fastboot devices" without the inverted commas and hit enter.
You'll see something like this: abc123 fastboot
(If cmd doesn't return you with anything like this after hitting enter then install fastboot drivers again properly and try again)
•Once you see that, type in "fastboot flash recovery twrp.img" without the inverted commas and hit enter.
•You'll see the success result. Then type "fastboot boot twrp.img" without the inverted commas and hit enter to boot into twrp.
Click to expand...
Click to collapse
thanks i will try it next day sir

[ROOT][GUIDE][ZD551KL] Zenfone Selfie Stock Android 6.0.1

This tutorial was tested on Stock Android 6.0.1 with unlocked bootloader
HOW TO
1) Install the ADB;
2) Copy the SuperSU file to the phone memory;
2) Disconnect phone;
3) Enter the Fastboot mode: Turn the phone on by holding volume (+) and the power button;
4) Connect the device via USB to the computer;
5) Copy the TWRP .zip file to the ADB folder (C: \ adb);
6) Right-click an empty area inside the Fastboot folder by holding down the SHIFT key on the keyboard and select the open command window option here;
7) Then, enter the following command in the command window:
Fastboot flash recovery twrp-3.0.2-5-Z00L.img
Click to expand...
Click to collapse
8) Then enter the following command:
Fastboot reboot
Click to expand...
Click to collapse
9) Your phone will reboot after entering this command. Once you send the command, press and hold the volume key (+) to enter the TWRP;
10) In TWRP go to Install and select the SuperSU .zip file. At the end of the installation, clean the Dalvik / Cache and restart the phone.
There, your Zenfone Selfie is rooted!
Note:
NO ONE IN THIS FORUM, NOR THE FORUME ITSELF, IT'S RESPONSABLE OF YOUR ACTION!
THIS GUIDE COULD BRICK YOUR PHONE, FOLLOW IT AT YOUR OWN RISK!
Required files:
ADB: https://drive.google.com/file/d/0B0MKgCbUM0itVVFWRC02Q0VBQnc/view?usp=sharing
TWRP 3.0.2-5-Z00L (.img): https://dl.twrp.me/Z00L/
SuperSU (2.79 - zip version): http://www.supersu.com/download

hello,
after interring " Fastboot flash recovery twrp-3.0.2-5-Z00L.img"
it is stuck on " waiting for device "
what is the solution ?

Cant boot to recovery

Hello guys,
After doing oem unlock with fastboot ,i've tried to flash TWRP recovery but after the comand i cannot acess recovery, it just reboots. Tried several recovery images and read alot of toturials but with no sucess!! Win10 64bits computer here.
Thanks,
NightSource

Nightsource said:
Hello guys,
After doing oem unlock with fastboot ,i've tried to flash TWRP recovery but after the comand i cannot acess recovery, it just reboots. Tried several recovery images and read alot of toturials but with no sucess!! Win10 64bits computer here.
Thanks,
NightSource
Click to expand...
Click to collapse
Did you hold the volume down button + power button to get to recovery mode manually right after flashing?
Gesendet von meinem ONEPLUS A3003 mit Tapatalk

If you have successfully unlocked the bootloader, you'll get a bootloader unlocked warning every time you boot. On the warning screen, click either of the volume buttons and you'll be redirected to a bootup menu. From there, you can select "boot to recovery" using the volume rocker and power button.
Alternatively, enable "advanced reboot" in developer options and reboot to recovery from the main OS power menu.
If these don't work, reflash TWRP using fastboot. Make sure that you're using at least version 3.0.3-1, best to use 3.0.4-1.

Tried manually reboot into recovery but it just reboots,
I can sucessfully unlock as i have the warning on boot, but there if i go to the menu and press for recovery it just reboots, tried several tipes of recovery TWRP imgs
Any help greatly wanted

Download this version of TWRP (jcadduono's 4.0.3-1). Rename the file to something like twrp.img.
1) Make sure adb/fastboot is working on your computer (if you've already unlocked the bootloader, then I am assuming it is).
2) Put your phone into fastboot mode and connect it to your computer. Open a command prompt where you can access fastboot.
3) Put the twrp.img file to the same folder where you opened your command prompt.
3) Enter
Code:
fastboot devices
in fastboot and make sure your phone shows up with its serial number.
4) Enter
Code:
fastboot erase recovery
to erase your current recovery
5) Enter
Code:
fastboot flash recovery [B]twrp.img[/B]
, where twrp.img is whatever you named your twrp file.
6) Enter
Code:
fastboot reboot
to reboot into your main system. You can either reboot then use advanced startup to enter recovery, or press a volume button at the bootloader warning page to boot directly to recovery.

Anova's Origin said:
Download this version of TWRP (jcadduono's 4.0.3-1). Rename the file to something like twrp.img.
1) Make sure adb/fastboot is working on your computer (if you've already unlocked the bootloader, then I am assuming it is).
2) Put your phone into fastboot mode and connect it to your computer. Open a command prompt where you can access fastboot.
3) Put the twrp.img file to the same folder where you opened your command prompt.
3) Enter
Code:
fastboot devices
in fastboot and make sure your phone shows up with its serial number.
4) Enter
Code:
fastboot erase recovery
to erase your current recovery
5) Enter
Code:
fastboot flash recovery [B]twrp.img[/B]
, where twrp.img is whatever you named your twrp file.
6) Enter
Code:
fastboot reboot
to reboot into your main system. You can either reboot then use advanced startup to enter recovery, or press a volume button at the bootloader warning page to boot directly to recovery.
Click to expand...
Click to collapse
Sometimes it helps to use fastboot to boot the image directly after you flash it. This ensures you get into recovery since it loads it off your computer.
It should then work normally afterwards
Sent from my ONEPLUS A3000 using Tapatalk