Related
i just bought my device 2 weeks ago (no waranty ) eveything were going just fine then suddenly the phone won't boot, just stuck at the logo screen, i got everything stock i didnt got time to even check the firmware version since i got it, any help?
7OOKA said:
i just bought my device 2 weeks ago (no waranty ) eveything were going just fine then suddenly the phone won't boot, just stuck at the logo screen, i got everything stock i didnt got time to even check the firmware version since i got it, any help?
Click to expand...
Click to collapse
Put the lastest offical firmware(dload folder)(Watch REGIO!!!) in your sd card and install with 3 button method.
kabirjedi said:
Put the lastest offical firmware(dload folder)(Watch REGIO!!!) in your sd card and install with 3 button method.
Click to expand...
Click to collapse
is b125 the newest one for the international version?
7OOKA said:
is b125 the newest one for the international version?
Click to expand...
Click to collapse
Yes, its latest.
Sent from my HUAWEI P6-U06 using xda app-developers app
7OOKA said:
i just bought my device 2 weeks ago (no waranty ) eveything were going just fine then suddenly the phone won't boot, just stuck at the logo screen, i got everything stock i didnt got time to even check the firmware version since i got it, any help?
Click to expand...
Click to collapse
Does it everytime when you power up the phone? I sometimes had this issues, but then i turned the device off and on again and everything was fine
kabirjedi said:
Put the lastest offical firmware(dload folder)(Watch REGIO!!!) in your sd card and install with 3 button method.
Click to expand...
Click to collapse
did that with no luck, i cant turn off the device its always on and stuck on the logo, tried to hold the power button for 10 seconds while holding vol + and - buttons but it always reboot and stuck on the logo, any help?
edit: i cant boot to recovery too (vol + and power button) it only reboots to the logo and stuck on that
7OOKA said:
did that with no luck, i cant turn off the device its always on and stuck on the logo, tried to hold the power button for 10 seconds while holding vol + and - buttons but it always reboot and stuck on the logo, any help?
Click to expand...
Click to collapse
Keep pressing volume +- even after fon restarts.
Sent from my HUAWEI P6-U06 using xda app-developers app
husen4u said:
Keep pressing volume +- even after fon restarts.
Sent from my HUAWEI P6-U06 using xda app-developers app
Click to expand...
Click to collapse
no luck
7OOKA said:
no luck
Click to expand...
Click to collapse
This is a longshot but since you dont have warranty you might give it a try.
Remove the back of the phone (there are tutorials on youtube for "disassembling ascend P6") and then remove the battery inside. Afterwards connect the phone to your ac charger, and retry to force update (power button while holding vol + and - buttons).
I really dont know if this works, but when i bricked my other huawei phone (u8800) where the battery was removable I managed to restore it using the aforementioned method..
Best of luck!
I had same problem last week, press volume up/down when phone boot. and keep pressing those buttons.
Dosnt work every time.. download firmware first and add it to external sd/dload folder..
i think i lost my stock recovery, i dont know why but i think that happened, but can anyone tell if the loss of the recovery will lead to the failure of force update? (in my case it won't start at all just stuck at logo)
if that happened i might try reflashing stock recovery with fastboot
ok i tried to flash stock recovery via fastboot, but the problem is my pc only reads my device when i connect it to it then hold power and vol - buttons till it reboots, then my pc reads it as an adb interface but it shows that it failed to install device drivers although i already installed the usb drivers and updated google usb drivers from android sdk, and everytime i try to flash recovery via adb (fastboot flash recovery recovery.img) it stuck with waiting for device
it seems its not recognized properly, am i hard bricked? :crying:
same problem with ascend mate
hi,
I have the same exact problem with my ascend mate mt1. its always stuck to ascend logo. when I press power button and hold cannot turn off. always turn on by itself. if I press volume down and power button, my computer can recognize it as fastboot. drivers can install no problem. can see the device when I type fastboot devices. when I try to install recovery with fastboot I always get that error says "not allowed". tried sd card update with press volume up + down no luck, also tried it with removing the battery but same. I think its hard bricked or something if you find a solution please let me know.
Thanks a lot !
ens1986 said:
hi,
I have the same exact problem with my ascend mate mt1. its always stuck to ascend logo. when I press power button and hold cannot turn off. always turn on by itself. if I press volume down and power button, my computer can recognize it as fastboot. drivers can install no problem. can see the device when I type fastboot devices. when I try to install recovery with fastboot I always get that error says "not allowed". tried sd card update with press volume up + down no luck, also tried it with removing the battery but same. I think its hard bricked or something if you find a solution please let me know.
Thanks a lot !
Click to expand...
Click to collapse
i managed to get my pc to read my device properly (uninstalled usb drivers and reinstalled then voilla ) then flashed stock recovery via fastboot and the device booted just fine, however i cant connect to my network now although my phone sees it :crying:
anyway, make sure ur device is properly working with fastboot, just type fastboot devices in cmd and u should see some letters or numbers
also did u tried different recoveries it may be bad recovery file
Thanks
thanks for the fast reply. when I connected via fastboot its doesn't shows the serial numbers. its shows like question mark instead of serial number. I cannot find the stock recovery file , I only tried with twrp recovery and it gave the that message " Not allowed". I think I don't have driver issue but I will try though.
7OOKA said:
i managed to get my pc to read my device properly (uninstalled usb drivers and reinstalled then voilla ) then flashed stock recovery via fastboot and the device booted just fine, however i cant connect to my network now although my phone sees it :crying:
anyway, make sure ur device is properly working with fastboot, just type fastboot devices in cmd and u should see some letters or numbers
also did u tried different recoveries it may be bad recovery file
Click to expand...
Click to collapse
ens1986 said:
thanks for the fast reply. when I connected via fastboot its doesn't shows the serial numbers. its shows like question mark instead of serial number. I cannot find the stock recovery file , I only tried with twrp recovery and it gave the that message " Not allowed". I think I don't have driver issue but I will try though.
Click to expand...
Click to collapse
ur device is connected properly, try to flash stock recovery from here : http://forum.xda-developers.com/attachment.php?attachmentid=2221316&d=1377788073
also make sure ur connecting with fastboot by plugging usb then rebooting while holding vol - (down) and power buttons
my ascend mate's exact model is MT1 - U06. it this file good for MT1 - U06 ?
Thanks
7OOKA said:
ur device is connected properly, try to flash stock recovery from here : http://forum.xda-developers.com/attachment.php?attachmentid=2221316&d=1377788073
also make sure ur connecting with fastboot by plugging usb then rebooting while holding vol - (down) and power buttons
Click to expand...
Click to collapse
ens1986 said:
my ascend mate's exact model is MT1 - U06. it this file good for MT1 - U06 ?
Thanks
Click to expand...
Click to collapse
not sure to be honest
823834511
Hey your file actually worked. Just tried couple of times and it worked.
Thanks a lot you are life saver
7OOKA said:
not sure to be honest
Click to expand...
Click to collapse
Please help lg g 3 won't enter custom recovery I've tried all button variations
Please someone help I have a rooted g3 and don't wanna brick it?????
Go into an adb terminal and type in
Code:
adb reboot recovery[/quote]. If you don't have adb, search up minimal adb and fastboot, and how to use it.
Sent from my SM-N9100 using Tapatalk
On computer or phone?
Sent from my VS985 4G using XDA Free mobile app
And my phone already has twrp, just can't access it from device being off, but twrp app lets me go to recovery, just not when phone is off. So this should fix that right?
Sent from my VS985 4G using XDA Free mobile app
Please someone help
I've seen people are viewing this post if anyone know how to fix my problem please help or message me, the minimal adb won't work unless the device is turned on in usb. debugging, I can access my recovery with phone on easily but while it's powered off I should be able to get to custom recovery by pressing volume down and power while phone is off, but this method isn't working. So if I get in bootloop I can't get into custom recovery...please anyone any ideas
Well it should be as simple as holding down power and volume button down things but i guess you've already tried that method many times and it didnt work so you ask then, right?
If your phone in bootloop, you can flash tot files and it will back to stock re-root and re-install trwp.
If your phone still (or already) normal, you can download an app that can take you to custom recovery such as rebooter or power menu, thats it.
Yea phone isn't in bootloop, but if I put a Rom on phone I have no way to access the recovery because the volume and power won't take me to the recovery, so if it goes into bootloop I'm outta of luck I don't understand why the hardware buttons won't take me to the recovery, have you ever heard of this problem
brozillatyler said:
I've seen people are viewing this post if anyone know how to fix my problem please help or message me, the minimal adb won't work unless the device is turned on in usb. debugging, I can access my recovery with phone on easily but while it's powered off I should be able to get to custom recovery by pressing volume down and power while phone is off, but this method isn't working. So if I get in bootloop I can't get into custom recovery...please anyone any ideas
Click to expand...
Click to collapse
How long are you holding the vol down and power buttons? It should be around 15-20 seconds, then your system recovery screen comes up, you choose factory data reset, yes, and then TWRP comes up. If that isn't working - are you sure your buttons are working OK?
If the phone is turned off is there any other way to access it while phone is off?
Yes buttons work fine I hold it down and it just goes to Verizon screen ?
Actually when I hold it down it just stays on logo and reboots back to logo over and over and over
Actually I hold it down and it reboots to logo over and over its like there's no recovery there I don't understand lol
If anyone has any ideas or thoughts on how to fix this please let me know
brozillatyler said:
If anyone has any ideas or thoughts on how to fix this please let me know
Click to expand...
Click to collapse
OK... Does your phone boot into your ROM at all or are you bootlooped? If your phone boots, download an app called flashify and get the proper twrp .img file for your model and flash the image using flashify. It's an easy app to use - just make sure you're using the correct twrp .img for your phone...from here: http://forum.xda-developers.com/lg-g3/orig-development/recovery-twrp-touch-recovery-2-8-2-0-t2966129
If you are bootlooped I would suggest starting over and reflashing back to stock using the tot or kdz method. Here is a guide: http://forum.xda-developers.com/verizon-lg-g3/general/restore-verizon-to-stock-t2827878 I know it can be a pain to get the download tool working properly sometimes, so it may take some effort to get it working, but be patient (and read a lot if you get stuck) and you will get it working.
I don't know how you got borked...maybe it was an un-bumped twrp image? Either way, it is what it is, just try not to do it again Good luck.
Thanks much I'll try this
When this happened to me i would
1: remove battery
2: insert battery
3: hold volume down and lock button at the same time
4: When the LG Logo pops up release the lock button for 1 second (while still holding the volume down button), then press down again
5: A data reset/restore menu appears, and when you choose to reset/restore, TWRP boots to recovery.
jared1992 said:
When this happened to me i would
1: remove battery
2: insert battery
3: hold volume down and lock button at the same time
4: When the LG Logo pops up release the lock button for 1 second (while still holding the volume down button), then press down again
5: A data reset/restore menu appears, and when you choose to reset/restore, TWRP boots to recovery.
Click to expand...
Click to collapse
I tried this also not working how did you fix it?
brozillatyler said:
I tried this also not working how did you fix it?
Click to expand...
Click to collapse
Hmm. That worked for me. I'm not sure what next.
hy there!
i'm new here and need your help - my s4 mini just stopped working...from one sec to the other...first i only had a black screen and instantly tried a new battery. nothing changed.
next, i tried snipping against the power button and after a few seconds the s4 mini logo popped up. but it's stuck in this stage. after a few seconds the phone shuts down and starts again. (battery vibrates once, logo appears, shuts down and repeats again) btw if connected via usb charger, first the battery logo appears but no animated charging progress is shown
i tried the recovery mode....display shows "recovery booting..." for about 2 seconds....then shuts down again...starting all over again
i'm only able to get into downloading / ODIN mode....phone doesn't shut down and stays this way!!!
first i thought it had something to do with the power button issue, so i disabled it. i already removed it from the platin. nothing changed.
unfortunately i didn't create a back up recently - maybe there's a way i could get pass bootloop just to create a backup?! any ideas/help...really appreciate it! thank you!!!
Flash stock firmware.
echo124 said:
Flash stock firmware.
Click to expand...
Click to collapse
thx for your reply! any chance i can save the internal memory before that step?!
Flash twrp and reboot to twrp after flash, connect to pc to transfer data
Hey,
No if you flash stock firmware you do lose yout internal data.
But your phone is working again and thats where its all about
echo124 said:
Flash twrp and reboot to twrp after flash, connect to pc to transfer data
Click to expand...
Click to collapse
just installed twrp via odin3 (but unchecked "auto reboot" and "f. reset time")....although progress "pass!", i'm still not able to get into twrp recovery mode because of bootloop.
btw: phone is not rooted and i only want to save internal data (sms, contacts, etc.)!
sry for bothering but i'm a noob!
cpk_86 said:
just installed twrp via odin3 (but unchecked "auto reboot" and "f. reset time")....although progress "pass!", i'm still not able to get into twrp recovery mode because of bootloop.
btw: phone is not rooted and i only want to save internal data (sms, contacts, etc.)!
sry for bothering but i'm a noob!
Click to expand...
Click to collapse
Flash twrp recovery then boot into twrp recover with vol up+home+power, should work.
echo124 said:
Flash twrp recovery then boot into twrp recover with vol up+home+power, should work.
Click to expand...
Click to collapse
unfortunately...still stuck at "recovery booting..."! bootloop still prohibits twrp recovery. tried multiple times.
stock
My dear P2a42 keeps stock on the first boot-logo :crying:
I've already tries to recover boot and system with TWRP 3.0.3 and TWRP 3.0.3-3. Also tried to wipe the whole phone and reinstall the ROM (the modded newest stock ROM), this also didn't work.
Strange problem IMHO... What's the best way to completely reset the phone to stock, flashing it with fastboot?? Or is there a possible other solution?
Thanks in advance :good:
Have a nice day y'all.
ilmervanhattem said:
My dear P2a42 keeps stock on the first boot-logo :crying:
I've already tries to recover boot and system with TWRP 3.0.3 and TWRP 3.0.3-3. Also tried to wipe the whole phone and reinstall the ROM (the modded newest stock ROM), this also didn't work.
Strange problem IMHO... What's the best way to completely reset the phone to stock, flashing it with fastboot?? Or is there a possible other solution?
Thanks in advance :good:
Have a nice day y'all.
Click to expand...
Click to collapse
try this not sure if it will work for you
https://www.youtube.com/watch?v=ixnZMM5FRIs
abhayruparel said:
try this not sure if it will work for you
https://www.youtube.com/watch?v=ixnZMM5FRIs
Click to expand...
Click to collapse
Thank you, but I don't want to downgrade. Why should I.
Either way I'm not able to watch youtube here.
ilmervanhattem said:
Thank you, but I don't want to downgrade. Why should I.
Either way I'm not able to watch youtube here.
Click to expand...
Click to collapse
Actually in video it's fastboot method only i didn't read the article of yours properly.
Sent from my Lenovo P2 using Tapatalk
Lenovo p2a42 stuck on logo
Lenovo P2 is stuck in a boot loop.
I can't enter the recovery menu. If I press Volume up and power, it tries to start normally. If I press Volume Down and Up and Power, Phone enters "Bootmode is 'recovery'". After 14 seconds, it tries to restart in the normal startup.
If I press power + Volume Down, it enters a menu to swich between "Start", "Barcodes" and "Power Off". it shows dthe device parameters like serial number, storage, ram and the date of the installed software.
What can I do?
The only fix to get back into TWRP,
when the phone reboots, in the short moment of a blank screen you need to press Volume Up + Power.
The only catch is you have to press the Volume Up for a very short time.
It took me many attemps untill i got back into TWRP !!
Do not wipe anything or the phone boots again and you might get stuck in the same shizzle.
So install your favorite Rom & GApps and hopelly all works fine again.
I accidentally flashed wrong Recovery for my A3 2017. I now get a message that i need Samsung Smart Switch from Samsung for emergency recovery.
But this f**cking program doesnt even install. On Samsung site its a dead link. I found another one, program doesnt install...
Any ideas? Is my phone bricked?
http://www.samsung.com/global/download/smartswitchwin/
kasa ssg said:
http://www.samsung.com/global/download/smartswitchwin/
Click to expand...
Click to collapse
i have it already...smartswitch doesnt help too :crying:
Is the phone recognized in ADB/Fastboot?
kasa ssg said:
Is the phone recognized in ADB/Fastboot?
Click to expand...
Click to collapse
i installed ADB. For first time. Using this site.
https://www.xda-developers.com/install-adb-windows-macos-linux/
im in a command line area with ADB now...but i dont know what to do
https://gyazo.com/e1d3b6dcce3a18211bbcb85fd9467e28
How to switch off my phone? I tried a lot of key combo's, but it keeps coming back to a blue/green screen with this warning message....
Anyone?
wogooo said:
How to switch off my phone? I tried a lot of key combo's, but it keeps coming back to a blue/green screen with this warning message....
Click to expand...
Click to collapse
I don't think there is one to force it to power off, I think there's only one to force it to reboot which is POWER + VOL DOWN (held down for a few seconds) on the A5, it's probably the same on the A3. Then immediately as the screen turns off you have to switch to the key combination for download mode or recovery. If if you just release the keys it will try and boot normally.
makeyourself said:
I don't think there is one to force it to power off, I think there's only one to force it to reboot which is POWER + VOL DOWN (held down for a few seconds) on the A5, it's probably the same on the A3. Then immediately as the screen turns off you have to switch to the key combination for download mode or recovery. If if you just release the keys it will try and boot normally.
Click to expand...
Click to collapse
thx!! im in download mode now
Im in Recovery now. When i try to wipe it says it cant mount /data, /cache, etc.
Also Restore doesnt work because of this. I tried to Repair. System seems to be repaired, but /data fails to repair. Also unable to repair cache.
What to do?
(needless to say i first flashed the correct Recovery )
In Windows Explorer i see only external sd
Somehow i seemed to fix /data en /system. But not cache and dalvik.
I restored a nandroid backup and it boots until LOS animation now. But there its stuck. (but at least i passed Android logo now)
Installation passed pretty good, only in the end it said cache wasnt mounted.
Any ideas?
alright no clue how but its fixed now lol