i just bought my device 2 weeks ago (no waranty ) eveything were going just fine then suddenly the phone won't boot, just stuck at the logo screen, i got everything stock i didnt got time to even check the firmware version since i got it, any help?
7OOKA said:
i just bought my device 2 weeks ago (no waranty ) eveything were going just fine then suddenly the phone won't boot, just stuck at the logo screen, i got everything stock i didnt got time to even check the firmware version since i got it, any help?
Click to expand...
Click to collapse
Put the lastest offical firmware(dload folder)(Watch REGIO!!!) in your sd card and install with 3 button method.
kabirjedi said:
Put the lastest offical firmware(dload folder)(Watch REGIO!!!) in your sd card and install with 3 button method.
Click to expand...
Click to collapse
is b125 the newest one for the international version?
7OOKA said:
is b125 the newest one for the international version?
Click to expand...
Click to collapse
Yes, its latest.
Sent from my HUAWEI P6-U06 using xda app-developers app
7OOKA said:
i just bought my device 2 weeks ago (no waranty ) eveything were going just fine then suddenly the phone won't boot, just stuck at the logo screen, i got everything stock i didnt got time to even check the firmware version since i got it, any help?
Click to expand...
Click to collapse
Does it everytime when you power up the phone? I sometimes had this issues, but then i turned the device off and on again and everything was fine
kabirjedi said:
Put the lastest offical firmware(dload folder)(Watch REGIO!!!) in your sd card and install with 3 button method.
Click to expand...
Click to collapse
did that with no luck, i cant turn off the device its always on and stuck on the logo, tried to hold the power button for 10 seconds while holding vol + and - buttons but it always reboot and stuck on the logo, any help?
edit: i cant boot to recovery too (vol + and power button) it only reboots to the logo and stuck on that
7OOKA said:
did that with no luck, i cant turn off the device its always on and stuck on the logo, tried to hold the power button for 10 seconds while holding vol + and - buttons but it always reboot and stuck on the logo, any help?
Click to expand...
Click to collapse
Keep pressing volume +- even after fon restarts.
Sent from my HUAWEI P6-U06 using xda app-developers app
husen4u said:
Keep pressing volume +- even after fon restarts.
Sent from my HUAWEI P6-U06 using xda app-developers app
Click to expand...
Click to collapse
no luck
7OOKA said:
no luck
Click to expand...
Click to collapse
This is a longshot but since you dont have warranty you might give it a try.
Remove the back of the phone (there are tutorials on youtube for "disassembling ascend P6") and then remove the battery inside. Afterwards connect the phone to your ac charger, and retry to force update (power button while holding vol + and - buttons).
I really dont know if this works, but when i bricked my other huawei phone (u8800) where the battery was removable I managed to restore it using the aforementioned method..
Best of luck!
I had same problem last week, press volume up/down when phone boot. and keep pressing those buttons.
Dosnt work every time.. download firmware first and add it to external sd/dload folder..
i think i lost my stock recovery, i dont know why but i think that happened, but can anyone tell if the loss of the recovery will lead to the failure of force update? (in my case it won't start at all just stuck at logo)
if that happened i might try reflashing stock recovery with fastboot
ok i tried to flash stock recovery via fastboot, but the problem is my pc only reads my device when i connect it to it then hold power and vol - buttons till it reboots, then my pc reads it as an adb interface but it shows that it failed to install device drivers although i already installed the usb drivers and updated google usb drivers from android sdk, and everytime i try to flash recovery via adb (fastboot flash recovery recovery.img) it stuck with waiting for device
it seems its not recognized properly, am i hard bricked? :crying:
same problem with ascend mate
hi,
I have the same exact problem with my ascend mate mt1. its always stuck to ascend logo. when I press power button and hold cannot turn off. always turn on by itself. if I press volume down and power button, my computer can recognize it as fastboot. drivers can install no problem. can see the device when I type fastboot devices. when I try to install recovery with fastboot I always get that error says "not allowed". tried sd card update with press volume up + down no luck, also tried it with removing the battery but same. I think its hard bricked or something if you find a solution please let me know.
Thanks a lot !
ens1986 said:
hi,
I have the same exact problem with my ascend mate mt1. its always stuck to ascend logo. when I press power button and hold cannot turn off. always turn on by itself. if I press volume down and power button, my computer can recognize it as fastboot. drivers can install no problem. can see the device when I type fastboot devices. when I try to install recovery with fastboot I always get that error says "not allowed". tried sd card update with press volume up + down no luck, also tried it with removing the battery but same. I think its hard bricked or something if you find a solution please let me know.
Thanks a lot !
Click to expand...
Click to collapse
i managed to get my pc to read my device properly (uninstalled usb drivers and reinstalled then voilla ) then flashed stock recovery via fastboot and the device booted just fine, however i cant connect to my network now although my phone sees it :crying:
anyway, make sure ur device is properly working with fastboot, just type fastboot devices in cmd and u should see some letters or numbers
also did u tried different recoveries it may be bad recovery file
Thanks
thanks for the fast reply. when I connected via fastboot its doesn't shows the serial numbers. its shows like question mark instead of serial number. I cannot find the stock recovery file , I only tried with twrp recovery and it gave the that message " Not allowed". I think I don't have driver issue but I will try though.
7OOKA said:
i managed to get my pc to read my device properly (uninstalled usb drivers and reinstalled then voilla ) then flashed stock recovery via fastboot and the device booted just fine, however i cant connect to my network now although my phone sees it :crying:
anyway, make sure ur device is properly working with fastboot, just type fastboot devices in cmd and u should see some letters or numbers
also did u tried different recoveries it may be bad recovery file
Click to expand...
Click to collapse
ens1986 said:
thanks for the fast reply. when I connected via fastboot its doesn't shows the serial numbers. its shows like question mark instead of serial number. I cannot find the stock recovery file , I only tried with twrp recovery and it gave the that message " Not allowed". I think I don't have driver issue but I will try though.
Click to expand...
Click to collapse
ur device is connected properly, try to flash stock recovery from here : http://forum.xda-developers.com/attachment.php?attachmentid=2221316&d=1377788073
also make sure ur connecting with fastboot by plugging usb then rebooting while holding vol - (down) and power buttons
my ascend mate's exact model is MT1 - U06. it this file good for MT1 - U06 ?
Thanks
7OOKA said:
ur device is connected properly, try to flash stock recovery from here : http://forum.xda-developers.com/attachment.php?attachmentid=2221316&d=1377788073
also make sure ur connecting with fastboot by plugging usb then rebooting while holding vol - (down) and power buttons
Click to expand...
Click to collapse
ens1986 said:
my ascend mate's exact model is MT1 - U06. it this file good for MT1 - U06 ?
Thanks
Click to expand...
Click to collapse
not sure to be honest
823834511
Hey your file actually worked. Just tried couple of times and it worked.
Thanks a lot you are life saver
7OOKA said:
not sure to be honest
Click to expand...
Click to collapse
Related
i flashed my e976 with e97610a.kdz. didnt root. i downloaded kdz file on website. lg-firmware.com. after flashed it has restarted. but stopped with 'telcel' logo. and dont work anymore. so i installed e79510h.kdz europe open version. after flashed. it asked password.
i pushed volume up + power key. cant into recoverymode.
anyone who has kdz for e976?
or who knows password?
or how i can solve this problem?
aqua06 said:
i flashed my e976 with e97610a.kdz. didnt root. i downloaded kdz file on website. lg-firmware.com. after flashed it has restarted. but stopped with 'telcel' logo. and dont work anymore. so i installed e79510h.kdz europe open version. after flashed. it asked password.
i pushed volume up + power key. cant into recoverymode.
anyone who has kdz for e976?
or who knows password?
or how i can solve this problem?
Click to expand...
Click to collapse
Had same problem when i flash 4.4 kdz on my f180l. The only option is to hard reset your device. You can see here
http://forum.xda-developers.com/showpost.php?p=52844336&postcount=33
This will also work with your device
umair928 said:
Had same problem when i flash 4.4 kdz on my f180l. The only option is to hard reset your device. You can see here
http://forum.xda-developers.com/showpost.php?p=52844336&postcount=33
This will also work with your device
Click to expand...
Click to collapse
vol up + power button and plug cable to pc.
it shows like this picture.
i clicked wipe.bat file on pc. and abd.exe also.
but nothing happened on my phone.
aqua06 said:
vol up + power button and plug cable to pc.
it shows like this picture.
i clicked wipe.bat file on pc. and abd.exe also.
but nothing happened on my phone.
Click to expand...
Click to collapse
you also need to install the driver for adb..
umair928 said:
you also need to install the driver for adb..
Click to expand...
Click to collapse
i installed driver for adb...
so...vol up +power button. and connect cable to pc.
it should show different?
what should be happen on phone?
aqua06 said:
i installed driver for adb...
so...vol up +power button. and connect cable to pc.
it should show different?
what should be happen on phone?
Click to expand...
Click to collapse
:angel:
The same thing happened except all things were written in korean. The phone shows same image as your phone is showing. I dont know what is wrong with you phone yesterday I tried same method on e975 and it worked perfectly..
umair928 said:
:angel:
The same thing happened except all things were written in korean. The phone shows same image as your phone is showing. I dont know what is wrong with you phone yesterday I tried same method on e975 and it worked perfectly..
Click to expand...
Click to collapse
i flashed E97510h.kdz on my E976 with CSemergency......
and its suddenly working
it didnt work before. i dont know why, is it normal?
anyway....its working now
very thank you for your advise.....
You need to complete shutdown your phone, press power key until the screen turn to complete black (and continue pressing for 5 or 10 seconds more), then, press VOLUME DOWN KEY + POWER KEY and you see a screen to hard reset your phone, press Power key again and your phone will be factory reset and restart normally. Try this without connecting to your PC. Obviously all your personal data will be delete.
nelrak said:
You need to complete shutdown your phone, press power key until the screen turn to complete black (and continue pressing for 5 or 10 seconds more), then, press VOLUME DOWN KEY + POWER KEY and you see a screen to hard reset your phone, press Power key again and your phone will be factory reset and restart normally. Try this without connecting to your PC. Obviously all your personal data will be delete.
Click to expand...
Click to collapse
after success flashing e97510h.kdz on my e976 with umair928's helping, i installed cm11(e975 version) but when i touch apps or setting it suddenly stopped screen with error and rebooting, so i had to re-flash e97510h.kdz(Euro open version) and it shows LG logo again and stopped booting.
i tried Vol down + power and press power and again, it shows like this...........
im trying to solve this problem again.......
i tried to flash with e97510F.kdz(hongkong version)...it worked..
i will try CM11 again ......thanks for your advise
HELP PLEASE!
OKAY HERE MY PROBLEM: Im too lazy to flash a TWRP via ADB Shell my phone huawei P6. and i search for easy way to install it . and i try Apps call flashify and flash the trwp direct on it. after flashing apps request me to reboot after i reboot my phone huawei P6. its stuck on Logo. and when i try to Off my phone. its automatically getting on and i try to hold Volume + and down plus power up to go to recovery mode and nothing happen. my phone stay stuck on logo untill he gets 0% of battery because when i try to off my phone. its automatically getting on. PLEASE! HELP ME! I MISS MY PHONE I SWEAR
BTW I HAVE AN "recovery-twrp.img" on my internal memory. can i flash it? even my phone stuck on logo? using abd&fastboot.zip with commcand promp? sorry im not too professional on android PLEASE HELP!
You really need to get your phone boot to fastboot-mode and flash the correct recovery that way now, you can find on this forum how to boot to fastboot, if I am right it is Volume Down + Power On. You will see the Huawei logo (it will look like your phone is stuck).
You can check with fastboot devices if it really is in fastboot-mode.
_Arjen_ said:
You really need to get your phone boot to fastboot-mode and flash the correct recovery that way now, you can find on this forum how to boot to fastboot, if I am right it is Volume Down + Power On. You will see the Huawei logo (it will look like your phone is stuck).
You can check with fastboot devices if it really is in fastboot-mode.
Click to expand...
Click to collapse
Sir can you post the link to how to fast boot my phone even its stuck? i really need to fix my phone.
Please help me. How to fix my phone stock on logo
Try to: Hold Power + vol up for then secs until it reboots. Then only hold vol up. Now it should be stuck in ascend logo. Now flash twrp with fastboot.
Sent from my P6-U06 using XDA Free mobile app
_heisenberg said:
Try to: Hold Power + vol up for then secs until it reboots. Then only hold vol up. Now it should be stuck in ascend logo. Now flash twrp with fastboot.
Sent from my P6-U06 using XDA Free mobile app
Click to expand...
Click to collapse
Sir. its not working i hold vol up. and my phone cant detect my computer. when i type "adb devices" there anothing appear that my phone is detected. PLEASE HELP! How can detect my phone? so i can flash new Twrp
Correction , i hold power button then vol up. when huawei logo appear i only hold vol up. then it still not detected on my computer. sorry for my bad english.
Help999 said:
Correction , i hold power button then vol up. when huawei logo appear i only hold vol up. then it still not detected on my computer. sorry for my bad english.
Click to expand...
Click to collapse
When your phone gets stuck on huawei logo it means you are in bootloader mode which means adb commands dont work anymore thats why the computer isnt recognizing it, so you need to install fastboot drivers and use fastboot commands to flash anything.
Sent from my P6-U06 using xda app-developers app
Once I had the same problem with P6 and someone told me to plug in charger and it will charge but very slow. And then i put b132 firmware on sd card, hold 3 button combination and phone did the rest
tileeq said:
When your phone gets stuck on huawei logo it means you are in bootloader mode which means adb commands dont work anymore thats why the computer isnt recognizing it, so you need to install fastboot drivers and use fastboot commands to flash anything.
Sent from my P6-U06 using xda app-developers app
Click to expand...
Click to collapse
Can you give me the link to install the fastboot drivers please? :3
and the next step after i've done downloading the fastboot drivers .
advance thanks sir. i appreciate your help. :good:
stuck on huawei logo
Ive experience also stuck on huawei ascend logo when flashing custom rom without twrp recovery. I just flash B118 chinese via stock recovery and all is ok now.
122
trimactam said:
Ive experience also stuck on huawei ascend logo when flashing custom rom without twrp recovery. I just flash B118 chinese via stock recovery and all is ok now.
Click to expand...
Click to collapse
how did you flash the rom? my phone didnt detect my computer and my phone cant go on recovery mode. so how did you flash the rom?
Hi, I updated with wrong recovery file and the device stuck in the boot logo. Even powering down is also not working. I can see that mac detects the USB device as HTC Android device. Any help will be greatly appreciated.
VBPrakash said:
Hi, I updated with wrong recovery file and the device stuck in the boot logo. Even powering down is also not working. I can see that mac detects the USB device as HTC Android device. Any help will be greatly appreciated.
Click to expand...
Click to collapse
Any one there to help me out
Hello prakash... Press power plus volume up for 10 seconds. It will automatically restart. As soon as you see it's restarting press volume down.. it will go into bootloader..
Flash proper recovery now from fastboot.. enjoy
Or directly go to boot loader if your phone is off.
Volume down + power.
stevestone said:
Hello prakash... Press power plus volume up for 10 seconds. It will automatically restart. As soon as you see it's restarting press volume down.. it will go into bootloader..
Flash proper recovery now from fastboot.. enjoy
Or directly go to boot loader if your phone is off.
Volume down + power.
Click to expand...
Click to collapse
Thanks Stevestone for the reply. I have drained the battery and restarted the mobile and as I type this I am flashing again.
VBPrakash said:
Thanks Stevestone for the reply. I have drained the battery and restarted the mobile and as I type this I am flashing again.
Click to expand...
Click to collapse
cool.. hope its working now..
stevestone said:
cool.. hope its working now..
Click to expand...
Click to collapse
Yes, its working now.
Well I faced the Same issue. Just Press Power+Vol UP ( YES UP) . Then the screen will go black for a sec and then quickly chage to vol down + power to go to bootloader.
help!!!!
htc desire eye. blank screen. but vibrates and charging led is on. what does it mean? thx
oz_ezekiel said:
htc desire eye. blank screen. but vibrates and charging led is on. what does it mean? thx
Click to expand...
Click to collapse
Is your problem solved ?
If not how did you get into that problem ?
Did you try force shutting down by pressing power down ?
Did you try "Press power plus volume up for 10 seconds" option ?
stevestone said:
Hello prakash... Press power plus volume up for 10 seconds. It will automatically restart. As soon as you see it's restarting press volume down.. it will go into bootloader..
Flash proper recovery now from fastboot.. enjoy
Or directly go to boot loader if your phone is off.
Volume down + power.
Click to expand...
Click to collapse
thanks
my phone also( when in flashed cm 13 6.0.1 today) hang up on logo i applied ur method and successfull
thank u very much i am from karntaka
hbrajhbh1 said:
thanks
my phone also( when in flashed cm 13 6.0.1 today) hang up on logo i applied ur method and successfull
thank u very much i am from karntaka
Click to expand...
Click to collapse
ok great. glad to know..
http://forum.xda-developers.com/desire-eye/help/stuck-boot-logo-partitioning-externalsd-t3321725
please help me out guys..
try use sdk or Minimal ADB and Fastboot use cmd
VBPrakash said:
Hi, I updated with wrong recovery file and the device stuck in the boot logo. Even powering down is also not working. I can see that mac detects the USB device as HTC Android device. Any help will be greatly appreciated.
1.run Minimal ADB and Fastboot as adminstrator..
2.. test devices 1st.. ( fastboot devices ) check yr phone cnnect or not.
3...try cmman (fastboot devices [-1] )
4. n last (fastboot continue )
5 done...
Click to expand...
Click to collapse
Thanks so much Your post helps me so much.....God blesse you....
But Now how can I back up My Phone...Please Helps me.......
After the battery drain it will be power off after charging it doesnot power on but the logo stucks
VBPrakash said:
Thanks Stevestone for the reply. I have drained the battery and restarted the mobile and as I type this I am flashing again.
Click to expand...
Click to collapse
are you flashing cyanogenmod (cm13)... ? if so please give me a viable link.. mine's putting the phone stuck at boot logo just as yourself...
Did not flash properly
sunilromy said:
Hello prakash... Press power plus volume up for 10 seconds. It will automatically restart. As soon as you see it's restarting press volume down.. it will go into bootloader..
Flash proper recovery now from fastboot.. enjoy
Or directly go to boot loader if your phone is off.
Volume down + power.
Click to expand...
Click to collapse
even i am stuck in this mode, after the 3rd step from WinDriod Toolkit flashed supersu, returned to install Lineage OS from TWRP mode, was sucessful in that too however forgot to install GAPPS after that and proceeded further, phone asked that super su not installed and if i want to install one now, proceeded from there and the screen now shows a 'sad Teal colour smile',
Also the volume + power up worked and device restarted however vol + power down doesnt seem to work and device returns to the same state 'sad Teal colour smile'.
RockyF99 said:
even i am stuck in this mode, after the 3rd step from WinDriod Toolkit flashed supersu, returned to install Lineage OS from TWRP mode, was sucessful in that too however forgot to install GAPPS after that and proceeded further, phone asked that super su not installed and if i want to install one now, proceeded from there and the screen now shows a 'sad Teal colour smile',
Also the volume + power up worked and device restarted however vol + power down doesnt seem to work and device returns to the same state 'sad Teal colour smile'.
Click to expand...
Click to collapse
When u press +volume +power and it restarts and screen goes black. Immediately press -volume +power. U will be able to get into recovery this way
I I'm facing the issue that I have no data connection after flashing CUOCO 13S US for the LeTv One Pro. Even when I configure manually my APN from T-Mobile germany. I also tried to activate Band 20 with * # * # 9439 # * # * and check mark the CDMA Box. Rebooted already and also tried to clear Cache and Dalvik. I get only GSM connection. I setup the phone via WLAN and noticed this morning that the phone is not able to get mobile data connection.
Any ideas how to fix it ? Flash again maybe ? Does anyone has the same experience ?
Thanks !
Tried also 11S from CUOCO92 same issue. Had to revert my former original TWRP NAND backup and LTE(4G) and 3G is working again. So something is breaking the mobile data connection for me with both CUOCO92 US ROMs 11S and 13S.
I have the same problem! I do not know what to do
So LTE Band 20 works for you on stock firmware?
Sent from my iPad using Tapatalk
aoleg said:
So LTE Band 20 works for you on stock firmware?
Sent from my iPad using Tapatalk
Click to expand...
Click to collapse
Yes it works. Even in a train ride I got LTE speed. But right now only with Stock 11S US, as I'm using SIM Slot 1 (nano). It seems that on CUOCOS 11S and 13S US, only SIM 2 (micro) works with mobile data. So again a dual SIM problem with those cooked ROMs.
Hi Guys!
Can anyone tell me how to enter fastboot on US version?
When I press Vol- + power i can see penguin for some seconds and phone restarts to system.
I cant flash recovery or nothing. Its killing me
YabaYaba said:
Hi Guys!
Can anyone tell me how to enter fastboot on US version?
When I press Vol- + power i can see penguin for some seconds and phone restarts to system.
I cant flash recovery or nothing. Its killing me
Click to expand...
Click to collapse
That's the right combo, i done it that way.
Vol -/power button, after third atempt, penguin stay and twrp with super su ported to x800(us version cuco92 11s)...
YabaYaba said:
Hi Guys!
Can anyone tell me how to enter fastboot on US version?
When I press Vol- + power i can see penguin for some seconds and phone restarts to system.
I cant flash recovery or nothing. Its killing me
Click to expand...
Click to collapse
The automatic reboot happened to me as well on Windows 10 with several different ADB USB Drivers. I could only root my US X800 phone with my described Linux rooting process. The USB Port always rebooted the phone back to normal mode. Connected on my Linux system the fastboot mode was kept.
--> http://forum.xda-developers.com/leeco-le1-pro/how-to/twrp-3-0-2-installation-process-letv-t3392462
YabaYaba said:
Hi Guys!
Can anyone tell me how to enter fastboot on US version?
When I press Vol- + power i can see penguin for some seconds and phone restarts to system.
I cant flash recovery or nothing. Its killing me
Click to expand...
Click to collapse
It's due to wrong drivers.
Try to install these drivers.
The trick is to hold vol down key all the time (the phone will keep rebooting to fastboot) while you are browsing through the windows to final dialog.
On the next cycle phone connects to the pc you hit ok button and the driver is installed.
The phone will stop rebooting afrer the correct driver is installed.
Hope it helps.
[email protected]@ said:
It's due to wrong drivers.
Try to install these drivers.
The trick is to hold vol down key all the time (the phone will keep rebooting to fastboot) while you are browsing through the windows to final dialog.
On the next cycle phone connects to the pc you hit ok button and the driver is installed.
The phone will stop rebooting afrer the correct driver is installed.
Hope it helps.
Click to expand...
Click to collapse
Good tip, thanks !
ADB, Fastboot and Drivers
http://forum.xda-developers.com/showthread.php?t=2588979
so i have an m30 , i flashed root successfully for the first time , then i decided to download a modded version of play store thats when my phone got stuck on the samsung logo , or whats called a boot loop , so i flashed a stock rom and it worked , i want to check if the oem unlock option in developer mode and it was there , i forget to check the usb debuging option so im not sure if its on or off , but i flashed root again and now im stuck on " SAMSUNG GALAXY M30
POWERED BY Android " logo , the phone just keeps restarting , rebooting not able to stop it or to boot to download mode , please please please help me
Manahzak said:
so i have an m30 , i flashed root successfully for the first time , then i decided to download a modded version of play store thats when my phone got stuck on the samsung logo , or whats called a boot loop , so i flashed a stock rom and it worked , i want to check if the oem unlock option in developer mode and it was there , i forget to check the usb debuging option so im not sure if its on or off , but i flashed root again and now im stuck on " SAMSUNG GALAXY M30
POWERED BY Android " logo , the phone just keeps restarting , rebooting not able to stop it or to boot to download mode , please please please help me
Click to expand...
Click to collapse
Does it have battery removal ?
DankMemz said:
Does it have battery removal ?
Click to expand...
Click to collapse
Nope
Manahzak said:
Nope
Click to expand...
Click to collapse
Then you're pretty much screwed
DankMemz said:
Then you're pretty much screwed
Click to expand...
Click to collapse
Give me some hope
Manahzak said:
Give me some hope
Click to expand...
Click to collapse
Dude, try holding volume down plus home button (if it has one) for 30 sec. If this doesn't work try holding volume up and home button (only if it has one).
DankMemz said:
Dude, try holding volume down plus home button (if it has one) for 30 sec. If this doesn't work try holding volume up and home button (only if it has one).
Click to expand...
Click to collapse
no it doesn't have a home button , and nothing will stop it , what i noticed tho that if i hold vol down and the power button the next time the logo will disappear way faster but only once each hold and ill get a delay of 2 seconds before that logo appearing again and the phone rebooting , its been literally 62 hours since it started doing this , it started with a battery fully charged meaning a 5000ma , about that delay i tried using it but nothing worked , i tried clicking vol up and power button which is supposed to put the phone in recovery mode but nothing happens , i went as far as spamming random buttons to holding them for more than a minute , nothing stops it
Manahzak said:
no it doesn't have a home button , and nothing will stop it , what i noticed tho that if i hold vol down and the power button the next time the logo will disappear way faster but only once each hold and ill get a delay of 2 seconds before that logo appearing again and the phone rebooting , its been literally 62 hours since it started doing this , it started with a battery fully charged meaning a 5000ma , about that delay i tried using it but nothing worked , i tried clicking vol up and power button which is supposed to put the phone in recovery mode but nothing happens , i went as far as spamming random buttons to holding them for more than a minute , nothing stops it
Click to expand...
Click to collapse
Then you hard bricked your device, sorry to tell you that. Take it to a service, and see if they can do anything to it, but you most surely bricked the hell out of your device, up to the point of no return.
DankMemz said:
Then you hard bricked your device, sorry to tell you that. Take it to a service, and see if they can do anything to it, but you most surely bricked the hell out of your device, up to the point of no return.
Click to expand...
Click to collapse
If you want to boot into download mode try this:
When you see Samsung logo immediately press volume up + down and while holding connect the phone to PC using Type-C.
A warning screen will appear now press Volume Up button to boot into Download mode.
ashubais said:
if you want to boot into download mode try this:
When you see samsung logo immediately press volume up + down and while holding connect the phone to pc using type-c.
A warning screen will appear now press volume up button to boot into download mode.
Click to expand...
Click to collapse
thank youuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuu
i love u and i greatly apprecciate it
Manahzak said:
thank youuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuu
i love u and i greatly apprecciate it
Click to expand...
Click to collapse
I am glad that this worked for you and your welcome.
ashubais said:
If you want to boot into download mode try this:
When you see Samsung logo immediately press volume up + down and while holding connect the phone to PC using Type-C.
A warning screen will appear now press Volume Up button to boot into Download mode.
Click to expand...
Click to collapse
My samsung M30S was stuck at boot screen for no reason and tried everything until I came upon your post and did as described. I was able to get into safe mode and reboot the phone. Thanks very much.
technofast said:
My samsung M30S was stuck at boot screen for no reason and tried everything until I came upon your post and did as described. I was able to get into safe mode and reboot the phone. Thanks very much.
Click to expand...
Click to collapse
Great. Good to hear that it worked for you.
ashubais said:
If you want to boot into download mode try this:
When you see Samsung logo immediately press volume up + down and while holding connect the phone to PC using Type-C.
A warning screen will appear now press Volume Up button to boot into Download mode.
Click to expand...
Click to collapse
Download mode not open for me :crying: :crying: :crying:
If you are stuck on Samsung Logo, connect to PC and press Vol Down + Power for 7 seconds. It will go to charge mode. Disconnect from PC and it will power off automatically. After that press Volume Up + Down and connect to PC while holding and you will enter download mode. It will ask for confirmation.
Useful. Works
ashubais said:
If you want to boot into download mode try this:
When you see Samsung logo immediately press volume up + down and while holding connect the phone to PC using Type-C.
A warning screen will appear now press Volume Up button to boot into Download mode.
Click to expand...
Click to collapse
Thank you for this post. I did this and my phone booted to TWRP. (I was flashing TWRP when I encountered the bootloop)
After booting to TWRP, I did an advanced wipe (I left System unchecked). After the wipe, the phone booted normally.
verisence said:
Thank you for this post. I did this and my phone booted to TWRP. (I was flashing TWRP when I encountered the bootloop)
After booting to TWRP, I did an advanced wipe (I left System unchecked). After the wipe, the phone booted normally.
Click to expand...
Click to collapse
TWRP on M305F, Android 10?
vdbhb59 said:
TWRP on M305F, Android 10?
Click to expand...
Click to collapse
Mine is M307FN, android 10
verisence said:
Mine is M307FN, android 10
Click to expand...
Click to collapse
Cool. TWRP for Android 10 came for M305F, and I am on GSI now.