USB-C to USB-A OTG Cable -
Not able to power a simple external USB MSata Drive or External USB HDD - I plug these drives into a LG V10 or a Galaxy S8 and work perfectly fine. What gives? I have only able to get a flash drive to work.
Any known work a rounds? Anyone else try this?
Thanks,
No answers for this?
XE-Cherokee said:
No answers for this?
Click to expand...
Click to collapse
I tried this just now and am shocked it doesn't work either.
I wonder if OTG power support was removed due to the decrease in battery size? Has anyone tried OTG "audio output", say through a device like the audioquest dragonfly, to see if that works??
Amd4life said:
I wonder if OTG power support was removed due to the decrease in battery size?
Click to expand...
Click to collapse
I don't think so, since the notification that pops up when I connect 32 GB ADATA USB 3.0 flash drive -> USB 2.0 A female to micro-B male OTG cable -> micro-B female to USB-C male adapter -> Z2F says the Z2F is providing power to the connected device. The problem is you can't do anything else BUT that.
Amd4life said:
Has anyone tried OTG "audio output", say through a device like the audioquest dragonfly, to see if that works??
Click to expand...
Click to collapse
I'm wondering this myself. The fact that the Z2F outputs analog audio over USB-C leads to me to believe that it isn't fully USB-compliant.* Both the HTC U11 and Google Pixel 2 output digital audio, which, based on Google's crowing about USB-PD and the existence of devices like the dragonfly, appears to be the right way to do things (albeit with the tradeoff of more expensive audio peripherals, which much now have their own onboard decoding hardware.)
*Can anyone with knowledge of the USB spec comment on this?
BTW, I started a support thread about this at the official forum, where it's received several replies and suggestions from a mod. Kindly chime in there too so Lenovo can see this is a real issue they need to address.
---------- Post added at 12:46 ---------- Previous post was at 12:25 ----------
Amd4life said:
Has anyone tried OTG "audio output", say through a device like the audioquest dragonfly, to see if that works??
Click to expand...
Click to collapse
So based on this Motorola mod post and the OP's statement that USB-C flash drives work, the Z2F and Z have the same (lack of? LOL) OTG functionality. The Moto Z subreddit has a pretty extensive thread about Moto Z DAC functionality; it appears the Dragonfly is supported, among others.
---------- Post added at 12:59 ---------- Previous post was at 12:46 ----------
Interesting development: another Motorola Forms mod now says powered USB hubs are rumored to work. We're making progress, folks.
Okay fellas,
I so far have been able to get certain drives to work and others not! I have tried 2 different USB-C to USB-A cables and get the same results, 1st ones an HP cable and 2nds an Anker USB-C to USB 3.1 Adapter
https://www.amazon.com/gp/product/B01COOQIKU/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
I have been able to get a 256gb M2Sata Drive, 500gb WD Mypassport, and a 2TB Mypassport to read.
I also have a 256gb MSata Drive that will not power up or read without using a powered usb hub. However the Msata Drive will read without an added powered HUB. On the Samsung and LG Devices.
Only thing I can think of is that certain drives have higher amperage that the Moto Z2 simply cannot push through its USB-C Port.
Good to know it isn't just me experiencing broken USB OTG support.
I've got a PS3, PS4, and Xbox one controller I hook up with USB OTG. Normally it's as simple as plug n play and I'm good to go. However, that doesn't seem to be the case here. I can still pair the PS3/4 controllers in sixaxis just fine and get power to the PS3/4 and Xbox one controllers. And yes, that bit about supply power to device rather than transfer and you can't pick something else, happens to me too. Sometimes I can plug my thumb drive in and I can explore through the storage file explorer, but I usually have better luck with an app called X-Plore.
This one time I even had said thumb drive take out my entire OS to the point where I had to use that June ROM to reset me back to start. Spoiler alert: I kept getting "Android.process.acore keeps crashing" over and over; various other apps kept crashing as well.
On a side note if I can at least get PS3/4 controllers to work for a long time within say, sixaxis (or similar) I'd appreciate any tips. Otherwise I either gotta wait for this to be solved in a future upgrade, future sixaxis, or when we start getting custom ROMs..
XE-Cherokee said:
Okay fellas,
I so far have been able to get certain drives to work and others not! I have tried 2 different USB-C to USB-A cables and get the same results, 1st ones an HP cable and 2nds an Anker USB-C to USB 3.1 Adapter
https://www.amazon.com/gp/product/B01COOQIKU/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
I have been able to get a 256gb M2Sata Drive, 500gb WD Mypassport, and a 2TB Mypassport to read.
I also have a 256gb MSata Drive that will not power up or read without using a powered usb hub. However the Msata Drive will read without an added powered HUB. On the Samsung and LG Devices.
Only thing I can think of is that certain drives have higher amperage that the Moto Z2 simply cannot push through its USB-C Port.
Click to expand...
Click to collapse
This is excellent information, thanks a lot man.
So FYI I tried the Anker adapter @XE-Cherokee linked to and it worked perfectly. That seems to be the solution for now.
XE-Cherokee said:
Okay fellas,
I so far have been able to get certain drives to work and others not! I have tried 2 different USB-C to USB-A cables and get the same results, 1st ones an HP cable and 2nds an Anker USB-C to USB 3.1 Adapter
https://www.amazon.com/gp/product/B01COOQIKU/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
I have been able to get a 256gb M2Sata Drive, 500gb WD Mypassport, and a 2TB Mypassport to read.
I also have a 256gb MSata Drive that will not power up or read without using a powered usb hub. However the Msata Drive will read without an added powered HUB. On the Samsung and LG Devices.
Only thing I can think of is that certain drives have higher amperage that the Moto Z2 simply cannot push through its USB-C Port.
Click to expand...
Click to collapse
Appreciate the heads up, to confirm this adapter works perfect with my external drives, and as an added plus, also my external DAP/amps for audio playback.
Amd4life said:
Appreciate the heads up, to confirm this adapter works perfect with my external drives, and as an added plus, also my external DAP/amps for audio playback.
Click to expand...
Click to collapse
This is huge, thanks!
jdrch said:
This is huge, thanks!
Click to expand...
Click to collapse
The latest Neutron and USB Audio Player Pro will output bitperfect (non upsampled) audio perfectly to both my portable DAC/amp units.
USB Audio Player pro, has the benefit that you can stream tidal native, bitperfect if you have an acct. Which is awesome imo. Tidal still buffers SUPER slow on this device though. So I'd recommended only offline use (which you CANT do with USB audio player pro due to licensing)
I would also add that I get some scratchiness out of the stock USB C to 3.5mm dongle that came with the phone. I thought it was the port being "dirty",. but I have NO NOISE out of the USB audio output using the Anker otg cable. Maybe Anker makes a USB c to 3.5mm adapter.
One tip for getting USB powered OTG drives to work is to use as short a USB cable as possible. Like get a good quality 1ft USB cable. I used to have a similar problem with using an external drive on a Wii and found that a 1ft cable would allow me to use 2 different drives that otherwise would not work with a 6ft cable.
It worked!
I used a USB 2.0/type C adapter that cames with s8 and instead the original USB 3.0 cable, put another adapter, and transferred files with Total Commander.
On this subject but kinda off topic. How are you all getting your drives mounted? I cannot mount NTFS or fat32 drives. Only ext3/4 drives.
israelnobrega said:
I used a USB 2.0/type C adapter that cames with s8 and instead the original USB 3.0 cable, put another adapter, and transferred files with Total Commander.
Click to expand...
Click to collapse
Yep, basically you created a 2 inch cable. LOL.
In essence, many USB powered hard drives approach the power limit of what the USB port can output. Power drops over the length of a USB cable, so longer cables may not provide sufficient power for the drive to function correctly. Better quality cables usually have less power drop, though it is not a guarantee.
Unfortunately most USB powered drives do not list their power requirements. The only way to really tell is to open the case for the USB drive and look at the hard drive inside it to find how many amps it draws. For the best compatibility you want the lowest amps.
I don't think that's otg power issue. I think it is locked by Moto becuase they want you to use their add-on devices. I have a wifi camera it doesn't work either, But it works in my all other phones
bobyang said:
I don't think that's otg power issue. I think it is locked by Moto becuase they want you to use their add-on devices. I have a wifi camera it doesn't work either, But it works in my all other phones
Click to expand...
Click to collapse
Just because an add-on device works for one USB OTG implementation doesn't mean that it works on all USB OTG implementations. There is an enumeration of what devices and types are accepted. I have tested USB OTG audio microphones, USB OTG audio speakers, USB OTG Headphones, USB OTG Ethernet, USB OTG Keyboards, USB OTG Flash drives and those device types work. If there is no device driver for the device attached then it would need to be supplied by an app. OTG power drain is definitely an issue and is mentioned in the OTG specifications.
That's what I tried to say. It is locked by Moto. They want you to use their add-on mod. I have tried extrenal usb c endoscope camera, wifi endoscope camera, lg wireleas projector, Samsung projector. None of them work with Moto. However, the same apps work in all other phones. It is clear to see, it is not all otg related all the time or driver which provided by app. It could be just locked by Moto, becuase they want use to use their mod add-on. People who rooted the phone was able to turn on those supports.
I use a Belkin OTG adapter, it worked but it was extremely picky. The Built in files app only picked up my HDD if it was either Fat32 or exfat. But the ES File Explorer app only picked up NTFS.
Related
Anyone know if it's possible to use MHL in conjunction with a microUSB to USB host adaptor to output to HDMI and access an external USB drive at the same time? That'd make the SGS2 an amazing portable media unit.
No, it is not posible. Its an either/or connection to the micro USB port.
Shame, because as you say that would really be a great thing. MHL consortium are considering a number of improvements to the 2.0 MHL spec, so in future devices this may be a possibility.
So MHL can't be used when I'll plug a USB-Hub?
No, sadly not.
It's a shame - for now I'd prefer micro USB & separate HDMI port so USB can be utilised as well as an external display.
As would I, and a lot of others I suspect.
But you've got 16 GB memory and can copy your stuff to the memory and watch it later via MHL on your Flat? So this is not a big problem, I think
s60mike said:
But you've got 16 GB memory and can copy your stuff to the memory and watch it later via MHL on your Flat? So this is not a big problem, I think
Click to expand...
Click to collapse
Yes, but 16Gb of FAT32 and you can't copy a file > 4Gb
I would use allshare to stream the movie or whatever to your phone from a laptop and connect the phone to TV via the MHL HDMI adapter...that way you have access to ur laptop's data without being hardwired to it
chizzwhizz said:
I would use allshare to stream the movie or whatever to your phone from a laptop and connect the phone to TV via the MHL HDMI adapter...that way you have access to ur laptop's data without being hardwired to it
Click to expand...
Click to collapse
Yes, it helps only if your laptop can't play smoothly a HD video
Has anyone got a generic MHL cable to work with the galaxy s 2 yet?
Sent from my GT-I9100 using Tapatalk
lufcmattylad said:
Has anyone got a generic MHL cable to work with the galaxy s 2 yet?
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
Not that I'm aware of...
I bought one from Ebay and can't really do anything good with it. Display shows briefly for 3-4 seconds on TV then disappears again. Don't know why.....I hope it's not the device itself because I tested 2 phones, they were bought at the same time, but none of them would work correctly....
If by generic you mean a not samsung one or one not dedicated to the SGS2 then i actually use a one, from ebay or someting like that, everything works perfect you just cant forget to plug power to it, and about the not working one, it seems mine gets jammed by gsm signal (i.e. when receiving a call), so from time to time the image disappears in a blink of noise, maybe that is your problem too, try it in airplane mode.
Oh, I think I misread that question - I have actually used a generic one with my SGSII (a prototype from the MHL consortium) and it worked fine!
chizzwhizz said:
I would use allshare to stream the movie or whatever to your phone from a laptop and connect the phone to TV via the MHL HDMI adapter...that way you have access to ur laptop's data without being hardwired to it
Click to expand...
Click to collapse
No, you can't, when the MHL is connected, the WiFi stops working, I regret not having bought the Optimus 2x
erebocln said:
No, you can't, when the MHL is connected, the WiFi stops working, I regret not having bought the Optimus 2x
Click to expand...
Click to collapse
Uhm no. I've been streaming with WIFI through MHL no problem for MONTHS. Using the Original Samsung MHL connector of course.
I have to put mine in offline mode to be able to use the MHL adapter.....
As for USB-OTG no luck yet.....
On Amazon, Ebay, DealExtrem ... you will find adapters that can do 3 things at a time:
- output HDMI
- let phone work as usb host, so that you can plug kbd, mouse, and external HDD (second wifi card, wired ethernet ...); once you have the usb A plug, just pub a hub
- recharge the phone (what is not possible with the legacy short OTG cable).
+ read memory cards
Such devices are sold as MHL devices. Some MHL devices don't to all that.
Take care. MHLv2 is more complex than MHLv1.
doublehp said:
On Amazon, Ebay, DealExtrem ... you will find adapters that can do 3 things at a time:
- output HDMI
- let phone work as usb host, so that you can plug kbd, mouse, and external HDD (second wifi card, wired ethernet ...); once you have the usb A plug, just pub a hub
- recharge the phone (what is not possible with the legacy short OTG cable).
+ read memory cards
Such devices are sold as MHL devices. Some MHL devices don't to all that.
Take care. MHLv2 is more complex than MHLv1.
Click to expand...
Click to collapse
Could you post a link as an example for such a device, that works properly (if you've tested, or you know it works) ?
Thank you
I can post links, but ... I have not tested any of those. And don't know any one personally who tested it.
Cable:
http://www.amazon.com/Juiced-Systems-MHL-Adapter-MicroSDHC/dp/B008CQKM2U
http://www.dx.com/p/5-in-1-micro-us...n-micro-usb-adapter-black-257780#.U8HYDNePul0
Monobloc:
http://www.ebay.fr/itm/Micro-USB-Ho..._MobilePhoneDataCables_JN&hash=item258600844e
I don't like the monobloc version; I fear it's too heavy, and may help breaking the phone plug.
There are all sorts of OTG and MHL cables. I have seen OTG dongles as short as 4cm (monobloc), with small cable (8cm: 4-8€), with long cable (1.5m .... should be 7 feet), pure HDMI (passive cable, no card reader, 8-12€), VGA (including very cheap HDMI to VGA converter, 20-30€ ... including sound output). In some case, you need to buy accessories (extra power supply, extra uUSB cable, extra HDMI cable). Also seen a very cute hybrid card reader: http://dx.com/p/285865 (I love this product design, and I love this URL syntax )
Don't forget that there can be mistakes in item description.
Here I have described how to build an external battery:
http://forum.xda-developers.com/showpost.php?p=54036759&postcount=17
On previous phone, I just soldered additional battery to internal one; on my new phone, I will do something more complex, and more flexible.
Loosing power via OTG/MHL is not a fatality. Most phone have an other hidden power input:
généric, that uses the USB plug:
http://www.dx.com/p/reverse-qi-wire...arger-receiver-for-micro-usb-cellphone-312805
TRIPLE CHECK POLARITY; I took the wrong one; have to fold the cable.
So ... even if your OTG/MHL module takes power from your USB, and can not recharge your phone, the specific shell can charge your phone the other way So, you need to build an internal specific module:
https://www.youtube.com/watch?v=UK7PRJ4SiK0
S2 specific back shell, so called receiver:
http://www.aliexpress.com/item/2013-newest-wireless-charger-for-samsung-galaxy-s2/1266101036.html
http://www.exportprive.com/en/batte...reless-charger-set-for-samsung-galaxy-s2.html
http://www.alibaba.com/product-detail/QI-Wireless-Charger-for-Samsung-Galaxy_821969998.html?s=p
The SGS2 is not designed to accept wireless chargers, so, you have two options:
- solder and take the pins out (cf youtube) (do not solder coild to battery, or you could overcharge the batt, and burn your phone ... I mean, physically set fire)
- find an item that includes back shell + specific battery (exportprive)
Many recent phones have the internal connectors, so you just need to change the back-cover. In this case, the software will be able to know the charger is wireless (as opposed to AC, and USB; advanced battery tools will show those 3 possibilities). I believe the motherboard for my HTC One M8 is designed to have those pins, but I can't find the specific cover yet (maybe in a few months); only found it for M7.
Hello everybody, i just received a usb type-c to female usb adapter (made by Victsing®) from amazon on this link amazon.fr/VicTsing-Adapteur-Convertisseur-Chromebook-appareils/dp/B017I8A40CUnfortunately it is not working on my oneplus 2. I plugged a mouse, xbox 360 controller, usb pen drive and it didn't even turned on. No lights, nothing...
Is there any tweak or app to instal to make it work? My opt is rooted and xposed is installed.
Thanks in advance!
karimfilal said:
Hello everybody, i just received a usb type-c to female usb adapter (made by Victsing®) from amazon on this link amazon.fr/VicTsing-Adapteur-Convertisseur-Chromebook-appareils/dp/B017I8A40CUnfortunately it is not working on my oneplus 2. I plugged a mouse, xbox 360 controller, usb pen drive and it didn't even turned on. No lights, nothing...
Is there any tweak or app to instal to make it work? My opt is rooted and xposed is installed.
Thanks in advance!
Click to expand...
Click to collapse
after looking through many forums, it seems that the issue is that OnePlus has used a slightly different setup with a 2.0 usb type-c connector so it doesn't work with anything other than their first party connectors. I have tried to connect a kingston data traveler microduo 3c and it isn't recognised either
So the issue is a hardware problem i guess, only solution is to buy their usb type c to micro usb adapted and then plug OTG cable?
So there will be no software fix...
Where do we find this orignal convertor
karimfilal said:
So the issue is a hardware problem i guess, only solution is to buy their usb type c to micro usb adapted and then plug OTG cable?
So there will be no software fix...
Click to expand...
Click to collapse
It may be possible for them to provide an update that creates a workaround to the problem however that does not seem very likely, i guess we just have to wait and see
---------- Post added at 11:24 AM ---------- Previous post was at 11:19 AM ----------
izzikiorage said:
Where do we find this orignal convertor
Click to expand...
Click to collapse
the original converter would be on the oneplus site or i have heard they are also available on Ali Express
So not in India yet i guess
Hmm... I have the original OTG cable from oneplus, 2 other OTG cable ( 1 is USB 2 and the other works both with USB2 and USB3 with power up mass storage) and none of them work for my OPT.... HOWEVER they work for my OPO.... fking oneplus....
Thank you for your responses.
Hope that android MM or CM will give a solution!
i asked the oneplus official, they said ONLY THEIR OTG adapter can work with OPT...
and what's worse, they are currently out of stock of this stupid adapter! They told me to visit offline shops. oh are you kidding?
well that sucks. I was planning to buy a OPT but decided not to. they decided to leave quick charge/turbo charge alone and made some modifications on their port so only their product would work. what about the countries where it's hard to ship a product. damn this is lame
I bought a third-party USB-C to Micro-USB adaptor from Amazon that works with Micro-USB OTG drives and my old Micro-USB OTG cable with a USB mouse & USB memory sticks.
Amazon.co.uk
Amazon.com
karimfilal said:
Hello everybody, i just received a usb type-c to female usb adapter (made by Victsing®) from amazon on this link amazon.fr/VicTsing-Adapteur-Convertisseur-Chromebook-appareils/dp/B017I8A40CUnfortunately it is not working on my oneplus 2. I plugged a mouse, xbox 360 controller, usb pen drive and it didn't even turned on. No lights, nothing...
Is there any tweak or app to instal to make it work? My opt is rooted and xposed is installed.
Thanks in advance!
Click to expand...
Click to collapse
I have 3 party adapter and it does not work!
@b.age Stick mount by chainfire on play, should work for you. OTG c seems to be okay on booted devices the problem for me is twrp
Archtects said:
@b.age Stick mount by chainfire on play, should work for you. OTG c seems to be okay on booted devices the problem for me is twrp
Click to expand...
Click to collapse
Thanks for reply I'll try this method.
Anyway I bought an OTG adapter (uUSB) and an uUSB-TypeC adapter (Xiaomi) and it works! (seems the problem is type C otg are always 3.0 op2 does not support USB 3.0 standard)
Mmm tbh I only use my USB stick and that always seems to work okay. USB C is just future proofing got to wait for rest to catch up now.
Does anyone know if the Pixel will support OTG without root?
ShaunWinSC said:
Does anyone know if the Pixel will support OTG without root?
Click to expand...
Click to collapse
I think I saw an unpacking video and the OTG adapter was included in the box.
just whacked a mouse into the adapter in the box. works fine.
Also tried with a mem stick, and works fine
What is the use of the USB to USB-C adapter that comes with the cable ?
AstroDigital said:
What is the use of the USB to USB-C adapter that comes with the cable ?
Click to expand...
Click to collapse
I think it was intended to facilitate moving files from an older phone. Mine is due to arrive any moment. I think we will all have some real answers soon.
Except most old phones do not have USB-C
AstroDigital said:
Except most old phones do not have USB-C
Click to expand...
Click to collapse
You plug the USB C end into the Pixel and then use another cable to connect an older phone (presumably one you're already using with the older phone). Micro USB/Lightning into the older phone, USB into the adapter. The adapter can also be utilized for OTG - USB C into the Pixel, flash drive/other USB device into the USB port.
AstroDigital said:
What is the use of the USB to USB-C adapter that comes with the cable ?
Click to expand...
Click to collapse
Also to use OTG. Plug that in, and you can hook up a keyboard, mouse, removable drive, someone elses phone, whatever.
Could someone clarify. I plugged the adapter in how I was directed by a thread at the "pixel community". The thread referenced a way to use the adapter to transfer files however I plugged it in set the settings to xfer files and nothing. Does the adapter go into the pixel or the (in my case) Note 7? The thread listed a way to make these transfers upon start up but I'm way past start up. I need to transfer a couple apps and a big phone log and a truck load of texts. Any help out there?
I'm new to USB-C so no idea if there is a working OTG cable. Any explanation and/or suggestion please. Thanks.
I got this one today. Works great!
I suggest this
https://www.amazon.com/dp/B018G6IK7E/ref=cm_sw_r_cp_apa_gjdfybD9ZQT4X
As a minimum.
Will let you use you existing micro usb cables
Will fast charge
Supports connecting your ecisting micro otg gizmos
Tronsmart is cheaper and also supports qc but not otg.
Watch out for junk c cable. Bad fit and trickle charge only.
I'm looking into purchasing a usb type-c to HDMI cable. Is anyone aware of a program that would let me output my phone's display to my pc?
motojdm said:
I'm looking into purchasing a usb type-c to HDMI cable. Is anyone aware of a program that would let me output my phone's display to my pc?
Click to expand...
Click to collapse
I'm pretty sure if you have the cable you don't need an extra program. It should just work.
Yep. And if your tv supports it wireless display too. Thought it would only work with LG tvs as that is what LG implied but I can sync to my samsung JS9500 just fine. Lag isn't too bad. And when doing screen changes or apps it looks like graphics glitch out but they don't. Haven't tested YouTube or my recorded videos yet. Have more important stuff to do first.
I had some initial difficulty getting a micro usb OTG cable working, I ended up testing a few and thought I would share in case it saves anyone else some time or money.
if anyone else has adapters they've tried feel free to list them
I actually haven't tried a straight USB type C OTG cable yet, all have been micro USB OTG units with a micro USB to type C converter since I already had so many lying around.
First off I should mention not all micro usb to USB type C converters support OTG.
this Meenova one does and works with the oneplus 3t: https://www.amazon.com/gp/product/B018G6IK7E/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
with that converter pretty much any OTG adapter will work.
Charging also works.
This micro USB OTG adaptor is nice because its so low profile.
I tested it with a flash drive and it works fine with the Meenova adapter listed above.
https://www.amazon.com/gp/product/B0196FG4DG/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
This Samsung adapter also works well with the Meenova adapter, it has quite a few features which I tested on the Oneplus 3t, its expensive though so unless you have a Samsung tablet as well its not likely to be worth it for most people:
built in features:
two USB ports
Ethernet port
Charging port for simultaneous charging and OTG
On the Oneplus 3t both charging and OTG work fine but not at the same time.
whichever you plug in first is what it will use until you unplug and re-plug in the adapter.
That being said my understanding is that this is likely just a kernel limitation, it was the same way on the nexus 7 and a custom kernel enabled the simultaneous charging.
I'm not sure how useful that would be on a phone but I thought I would mention it.
Both USB ports work simultaneously, I connected two flash drives and both were picked up by the phone right away.
I wasn't able to get the Ethernet port working, or at least there was no indicator that it was working (My samsung tablet gives a notification that the Ethernet is plugged in but Samsung may have added that, I'm not sure) I'll play with it some more later.
Adaptor link: https://www.amazon.com/gp/product/B00J2N0GB4/ref=oh_aui_detailpage_o08_s00?ie=UTF8&psc=1
and lastly I tried this micro USB to type c adapter and charging works but OTG does not:
https://www.amazon.com/gp/product/B0191FRCAA/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
Thanks for your post about OTG adapters. Do you have any updates on this issue? I'm looking for possible adapters but cannot find any.
The Meenova adapter is not available in Europe and also seems not to be available from Amazon.com anymore. I can also disadvise from Anker USB adapter because it doesn't work.
What I'm looking for is an USB typ-C to microUSB adapter for audio output via USB.
Anker adapter supports dash charge (works with oppo vooc power bank). I am trying OTG now, but I have some cheap OTG dongle (https://www.aliexpress.com/item/5pc...G-adapter-for-HTC-for-Samsung/1734417126.html) and I am not sure if it works at all Anyway OTG via Anker is not working for me at this moment.
mmmm1234 said:
Thanks for your post about OTG adapters. Do you have any updates on this issue? I'm looking for possible adapters but cannot find any.
The Meenova adapter is not available in Europe and also seems not to be available from Amazon.com anymore. I can also disadvise from Anker USB adapter because it doesn't work.
What I'm looking for is an USB typ-C to microUSB adapter for audio output via USB.
Click to expand...
Click to collapse
i have this one
http://www.ebay.co.uk/itm/381793306261
Black / For One Plus Two 2 3 (that's what it says in the drop down)
my Fiio E10k headphone amplifier works with it if that's what you're looking for
reubenbubu said:
i have this one
Black / For One Plus Two 2 3 (that's what it says in the drop down)
my Fiio E10k headphone amplifier works with it if that's what you're looking for
Click to expand...
Click to collapse
Thanks! Though it's USB type B. I need micro USB.