Related
I got a Micro-USB to USB (female) cable form ebay... from China (I didn't know until I chekced later. I usually have the "UK sellers only" option checked).
Anyway, after an eternity, it arrived today. But, it doesn't work when I plug it in. Nothing happens. My Sandisk Cruzer doesn't light up when I plug it in or anything.
I was on the ninphetamin3 Kernel, and I've tried the Siyah kernel, just in case it's the kernel that was limiting functionality... Apparently it's not because it still doesn't work.
It only cost a couple of quid, but is there something I might be missing that I can check before buying another from the UK?
Kryten2k35 said:
I got a Micro-USB to USB (female) cable...
Click to expand...
Click to collapse
That is not necessarily an OTG cable... did it SAY it was an OTG cable? If not, it probably isnt. Pin 4 and 5 need to be connected (in the micro usb side) for it trigger OTG functionality. if it is not working it means one of 2 things:
1. You didn't buy and OTG cable, you just bought a cable with the ends you wanted, but without the funtionality
2. Something is broken on your phone... test that cable in another phone with OTG capability (go to a verizon store if you have to)
3. I think i remember seeing you need an app to use some flash drives (keybaords and mice work without any app, i can attest to that from experience)
http://www.ebay.co.uk/itm/320786314480?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
That's the one I got. It's 5pin, but you're right in that it doesn't say it was OTG.
I don't have another OTG compatible device to test with
I got an OTG cable and I tired loads of different things to get it working.... in the end I rebooted the S3 with a usb drive connected and it worked after that.
I'm on stock rooted LG6
This is what I got
http://www.ebay.ie/itm/130728105355...X:IT&_trksid=p3984.m1439.l2649#ht_3061wt_1163
Kryten2k35 said:
http://www.ebay.co.uk/itm/320786314480?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
That's the one I got. It's 5pin, but you're right in that it doesn't say it was OTG.
I don't have another OTG compatible device to test with
Click to expand...
Click to collapse
yep, it is just a plug adapter.
You now have 2 choices:
1. cut open the micro USB, and connect pins 5 and six
2. buy one that actually says it is an OTG
if you can wait:
http://www.amazon.com/T-Flash-Adapt...ef=cm_rdp_product?t=slickdeals&tag=slickdeals
BAM! 64 cents.
a little xtra info:
http://forum.xda-developers.com/showthread.php?t=1812609
I ordered a OTG cable now, but also soldered the one I had and made that into one too., But the OTG one will be ok to pull out in public places, lol.
Hello everybody, i just received a usb type-c to female usb adapter (made by Victsing®) from amazon on this link amazon.fr/VicTsing-Adapteur-Convertisseur-Chromebook-appareils/dp/B017I8A40CUnfortunately it is not working on my oneplus 2. I plugged a mouse, xbox 360 controller, usb pen drive and it didn't even turned on. No lights, nothing...
Is there any tweak or app to instal to make it work? My opt is rooted and xposed is installed.
Thanks in advance!
karimfilal said:
Hello everybody, i just received a usb type-c to female usb adapter (made by Victsing®) from amazon on this link amazon.fr/VicTsing-Adapteur-Convertisseur-Chromebook-appareils/dp/B017I8A40CUnfortunately it is not working on my oneplus 2. I plugged a mouse, xbox 360 controller, usb pen drive and it didn't even turned on. No lights, nothing...
Is there any tweak or app to instal to make it work? My opt is rooted and xposed is installed.
Thanks in advance!
Click to expand...
Click to collapse
after looking through many forums, it seems that the issue is that OnePlus has used a slightly different setup with a 2.0 usb type-c connector so it doesn't work with anything other than their first party connectors. I have tried to connect a kingston data traveler microduo 3c and it isn't recognised either
So the issue is a hardware problem i guess, only solution is to buy their usb type c to micro usb adapted and then plug OTG cable?
So there will be no software fix...
Where do we find this orignal convertor
karimfilal said:
So the issue is a hardware problem i guess, only solution is to buy their usb type c to micro usb adapted and then plug OTG cable?
So there will be no software fix...
Click to expand...
Click to collapse
It may be possible for them to provide an update that creates a workaround to the problem however that does not seem very likely, i guess we just have to wait and see
---------- Post added at 11:24 AM ---------- Previous post was at 11:19 AM ----------
izzikiorage said:
Where do we find this orignal convertor
Click to expand...
Click to collapse
the original converter would be on the oneplus site or i have heard they are also available on Ali Express
So not in India yet i guess
Hmm... I have the original OTG cable from oneplus, 2 other OTG cable ( 1 is USB 2 and the other works both with USB2 and USB3 with power up mass storage) and none of them work for my OPT.... HOWEVER they work for my OPO.... fking oneplus....
Thank you for your responses.
Hope that android MM or CM will give a solution!
i asked the oneplus official, they said ONLY THEIR OTG adapter can work with OPT...
and what's worse, they are currently out of stock of this stupid adapter! They told me to visit offline shops. oh are you kidding?
well that sucks. I was planning to buy a OPT but decided not to. they decided to leave quick charge/turbo charge alone and made some modifications on their port so only their product would work. what about the countries where it's hard to ship a product. damn this is lame
I bought a third-party USB-C to Micro-USB adaptor from Amazon that works with Micro-USB OTG drives and my old Micro-USB OTG cable with a USB mouse & USB memory sticks.
Amazon.co.uk
Amazon.com
karimfilal said:
Hello everybody, i just received a usb type-c to female usb adapter (made by Victsing®) from amazon on this link amazon.fr/VicTsing-Adapteur-Convertisseur-Chromebook-appareils/dp/B017I8A40CUnfortunately it is not working on my oneplus 2. I plugged a mouse, xbox 360 controller, usb pen drive and it didn't even turned on. No lights, nothing...
Is there any tweak or app to instal to make it work? My opt is rooted and xposed is installed.
Thanks in advance!
Click to expand...
Click to collapse
I have 3 party adapter and it does not work!
@b.age Stick mount by chainfire on play, should work for you. OTG c seems to be okay on booted devices the problem for me is twrp
Archtects said:
@b.age Stick mount by chainfire on play, should work for you. OTG c seems to be okay on booted devices the problem for me is twrp
Click to expand...
Click to collapse
Thanks for reply I'll try this method.
Anyway I bought an OTG adapter (uUSB) and an uUSB-TypeC adapter (Xiaomi) and it works! (seems the problem is type C otg are always 3.0 op2 does not support USB 3.0 standard)
Mmm tbh I only use my USB stick and that always seems to work okay. USB C is just future proofing got to wait for rest to catch up now.
USB-C to USB-A OTG Cable -
Not able to power a simple external USB MSata Drive or External USB HDD - I plug these drives into a LG V10 or a Galaxy S8 and work perfectly fine. What gives? I have only able to get a flash drive to work.
Any known work a rounds? Anyone else try this?
Thanks,
No answers for this?
XE-Cherokee said:
No answers for this?
Click to expand...
Click to collapse
I tried this just now and am shocked it doesn't work either.
I wonder if OTG power support was removed due to the decrease in battery size? Has anyone tried OTG "audio output", say through a device like the audioquest dragonfly, to see if that works??
Amd4life said:
I wonder if OTG power support was removed due to the decrease in battery size?
Click to expand...
Click to collapse
I don't think so, since the notification that pops up when I connect 32 GB ADATA USB 3.0 flash drive -> USB 2.0 A female to micro-B male OTG cable -> micro-B female to USB-C male adapter -> Z2F says the Z2F is providing power to the connected device. The problem is you can't do anything else BUT that.
Amd4life said:
Has anyone tried OTG "audio output", say through a device like the audioquest dragonfly, to see if that works??
Click to expand...
Click to collapse
I'm wondering this myself. The fact that the Z2F outputs analog audio over USB-C leads to me to believe that it isn't fully USB-compliant.* Both the HTC U11 and Google Pixel 2 output digital audio, which, based on Google's crowing about USB-PD and the existence of devices like the dragonfly, appears to be the right way to do things (albeit with the tradeoff of more expensive audio peripherals, which much now have their own onboard decoding hardware.)
*Can anyone with knowledge of the USB spec comment on this?
BTW, I started a support thread about this at the official forum, where it's received several replies and suggestions from a mod. Kindly chime in there too so Lenovo can see this is a real issue they need to address.
---------- Post added at 12:46 ---------- Previous post was at 12:25 ----------
Amd4life said:
Has anyone tried OTG "audio output", say through a device like the audioquest dragonfly, to see if that works??
Click to expand...
Click to collapse
So based on this Motorola mod post and the OP's statement that USB-C flash drives work, the Z2F and Z have the same (lack of? LOL) OTG functionality. The Moto Z subreddit has a pretty extensive thread about Moto Z DAC functionality; it appears the Dragonfly is supported, among others.
---------- Post added at 12:59 ---------- Previous post was at 12:46 ----------
Interesting development: another Motorola Forms mod now says powered USB hubs are rumored to work. We're making progress, folks.
Okay fellas,
I so far have been able to get certain drives to work and others not! I have tried 2 different USB-C to USB-A cables and get the same results, 1st ones an HP cable and 2nds an Anker USB-C to USB 3.1 Adapter
https://www.amazon.com/gp/product/B01COOQIKU/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
I have been able to get a 256gb M2Sata Drive, 500gb WD Mypassport, and a 2TB Mypassport to read.
I also have a 256gb MSata Drive that will not power up or read without using a powered usb hub. However the Msata Drive will read without an added powered HUB. On the Samsung and LG Devices.
Only thing I can think of is that certain drives have higher amperage that the Moto Z2 simply cannot push through its USB-C Port.
Good to know it isn't just me experiencing broken USB OTG support.
I've got a PS3, PS4, and Xbox one controller I hook up with USB OTG. Normally it's as simple as plug n play and I'm good to go. However, that doesn't seem to be the case here. I can still pair the PS3/4 controllers in sixaxis just fine and get power to the PS3/4 and Xbox one controllers. And yes, that bit about supply power to device rather than transfer and you can't pick something else, happens to me too. Sometimes I can plug my thumb drive in and I can explore through the storage file explorer, but I usually have better luck with an app called X-Plore.
This one time I even had said thumb drive take out my entire OS to the point where I had to use that June ROM to reset me back to start. Spoiler alert: I kept getting "Android.process.acore keeps crashing" over and over; various other apps kept crashing as well.
On a side note if I can at least get PS3/4 controllers to work for a long time within say, sixaxis (or similar) I'd appreciate any tips. Otherwise I either gotta wait for this to be solved in a future upgrade, future sixaxis, or when we start getting custom ROMs..
XE-Cherokee said:
Okay fellas,
I so far have been able to get certain drives to work and others not! I have tried 2 different USB-C to USB-A cables and get the same results, 1st ones an HP cable and 2nds an Anker USB-C to USB 3.1 Adapter
https://www.amazon.com/gp/product/B01COOQIKU/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
I have been able to get a 256gb M2Sata Drive, 500gb WD Mypassport, and a 2TB Mypassport to read.
I also have a 256gb MSata Drive that will not power up or read without using a powered usb hub. However the Msata Drive will read without an added powered HUB. On the Samsung and LG Devices.
Only thing I can think of is that certain drives have higher amperage that the Moto Z2 simply cannot push through its USB-C Port.
Click to expand...
Click to collapse
This is excellent information, thanks a lot man.
So FYI I tried the Anker adapter @XE-Cherokee linked to and it worked perfectly. That seems to be the solution for now.
XE-Cherokee said:
Okay fellas,
I so far have been able to get certain drives to work and others not! I have tried 2 different USB-C to USB-A cables and get the same results, 1st ones an HP cable and 2nds an Anker USB-C to USB 3.1 Adapter
https://www.amazon.com/gp/product/B01COOQIKU/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
I have been able to get a 256gb M2Sata Drive, 500gb WD Mypassport, and a 2TB Mypassport to read.
I also have a 256gb MSata Drive that will not power up or read without using a powered usb hub. However the Msata Drive will read without an added powered HUB. On the Samsung and LG Devices.
Only thing I can think of is that certain drives have higher amperage that the Moto Z2 simply cannot push through its USB-C Port.
Click to expand...
Click to collapse
Appreciate the heads up, to confirm this adapter works perfect with my external drives, and as an added plus, also my external DAP/amps for audio playback.
Amd4life said:
Appreciate the heads up, to confirm this adapter works perfect with my external drives, and as an added plus, also my external DAP/amps for audio playback.
Click to expand...
Click to collapse
This is huge, thanks!
jdrch said:
This is huge, thanks!
Click to expand...
Click to collapse
The latest Neutron and USB Audio Player Pro will output bitperfect (non upsampled) audio perfectly to both my portable DAC/amp units.
USB Audio Player pro, has the benefit that you can stream tidal native, bitperfect if you have an acct. Which is awesome imo. Tidal still buffers SUPER slow on this device though. So I'd recommended only offline use (which you CANT do with USB audio player pro due to licensing)
I would also add that I get some scratchiness out of the stock USB C to 3.5mm dongle that came with the phone. I thought it was the port being "dirty",. but I have NO NOISE out of the USB audio output using the Anker otg cable. Maybe Anker makes a USB c to 3.5mm adapter.
One tip for getting USB powered OTG drives to work is to use as short a USB cable as possible. Like get a good quality 1ft USB cable. I used to have a similar problem with using an external drive on a Wii and found that a 1ft cable would allow me to use 2 different drives that otherwise would not work with a 6ft cable.
It worked!
I used a USB 2.0/type C adapter that cames with s8 and instead the original USB 3.0 cable, put another adapter, and transferred files with Total Commander.
On this subject but kinda off topic. How are you all getting your drives mounted? I cannot mount NTFS or fat32 drives. Only ext3/4 drives.
israelnobrega said:
I used a USB 2.0/type C adapter that cames with s8 and instead the original USB 3.0 cable, put another adapter, and transferred files with Total Commander.
Click to expand...
Click to collapse
Yep, basically you created a 2 inch cable. LOL.
In essence, many USB powered hard drives approach the power limit of what the USB port can output. Power drops over the length of a USB cable, so longer cables may not provide sufficient power for the drive to function correctly. Better quality cables usually have less power drop, though it is not a guarantee.
Unfortunately most USB powered drives do not list their power requirements. The only way to really tell is to open the case for the USB drive and look at the hard drive inside it to find how many amps it draws. For the best compatibility you want the lowest amps.
I don't think that's otg power issue. I think it is locked by Moto becuase they want you to use their add-on devices. I have a wifi camera it doesn't work either, But it works in my all other phones
bobyang said:
I don't think that's otg power issue. I think it is locked by Moto becuase they want you to use their add-on devices. I have a wifi camera it doesn't work either, But it works in my all other phones
Click to expand...
Click to collapse
Just because an add-on device works for one USB OTG implementation doesn't mean that it works on all USB OTG implementations. There is an enumeration of what devices and types are accepted. I have tested USB OTG audio microphones, USB OTG audio speakers, USB OTG Headphones, USB OTG Ethernet, USB OTG Keyboards, USB OTG Flash drives and those device types work. If there is no device driver for the device attached then it would need to be supplied by an app. OTG power drain is definitely an issue and is mentioned in the OTG specifications.
That's what I tried to say. It is locked by Moto. They want you to use their add-on mod. I have tried extrenal usb c endoscope camera, wifi endoscope camera, lg wireleas projector, Samsung projector. None of them work with Moto. However, the same apps work in all other phones. It is clear to see, it is not all otg related all the time or driver which provided by app. It could be just locked by Moto, becuase they want use to use their mod add-on. People who rooted the phone was able to turn on those supports.
I use a Belkin OTG adapter, it worked but it was extremely picky. The Built in files app only picked up my HDD if it was either Fat32 or exfat. But the ES File Explorer app only picked up NTFS.
Are there currently any adapters that allow charging while also using a 3.5mm jack?
The Google store has this, but nobody can give me any information on what "Coming Soon" means.
Any ideas?
Moshi has them available for purchase now, but only on their web site and not through google.
Hopefully that means google will have them soon, I really want one to leave in my car but i dont know if i can justify the 45$ price tag.
https://www.moshi.com/usb-c-digital-audio-adapter-with-charging
Edit: out of stock now
Edit 2(Nov. 8): back in stock.
Says they are out of stock
Another forum suggested this
dfryer1193 said:
Are there currently any adapters that allow charging while also using a 3.5mm jack?
The Google store has this, but nobody can give me any information on what "Coming Soon" means.
Any ideas?
Click to expand...
Click to collapse
I was researching for such a solution. In the XDA U11 forum, I saw this and ordered it, https://www.amazon.com/gp/product/B01N0R1F1M/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1. You plug the provided 3.5mm adapter into it. It would be a bad portable solution, but might be good enough for a desk. I will report back on whether it works for the Pixel 2.
ssnacks said:
I was researching for such a solution. In the XDA U11 forum, I saw this and ordered it, https://www.amazon.com/gp/product/B01N0R1F1M/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1. You plug the provided 3.5mm adapter into it. It would be a bad portable solution, but might be good enough for a desk. I will report back on whether it works for the Pixel 2.
Click to expand...
Click to collapse
Yes please report back. As I understand those adapters need to have a DAC builtin, but if you are using oem dongle then perhaps it can communicate to phone through this adapter
Using the included adapter
kolyan said:
Yes please report back. As I understand those adapters need to have a DAC builtin, but if you are using oem dongle then perhaps it can communicate to phone through this adapter
Click to expand...
Click to collapse
I dont know if you looked at the product, but what he is doing is using the included USB-C to 3.5mm adapter that came with the phone, so that DAC would be there.
Spoke with manufacturer, they said it will work 100%
But I already gave away my P2, I decided to keep P1 for now until 8.1 release at least. I was excited about camera but I prefer P1 images they look better to my eyes
ssnacks said:
I was researching for such a solution. In the XDA U11 forum, I saw this and ordered it, https://www.amazon.com/gp/product/B01N0R1F1M/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1. You plug the provided 3.5mm adapter into it. It would be a bad portable solution, but might be good enough for a desk. I will report back on whether it works for the Pixel 2.
Click to expand...
Click to collapse
Looks promising, I would be using this in my car. It looks like it would be heavy but it also has an SD reader I don't know how listening to music via OTG is
Success with the USB-C hub, charging, and USB-C audio adapter
kolyan said:
Yes please report back. As I understand those adapters need to have a DAC builtin, but if you are using oem dongle then perhaps it can communicate to phone through this adapter
Click to expand...
Click to collapse
It works completely! I tested a bunch of scenarios and am very happy. Only drawbacks so far are the thing is about half the size of the phone and the pigtail is about four inches.
Here is what works:
Rapid charging with a USB-C charger
Playing back music through the supplied USB-C audio adapter with and without charging attached
USB cable to an iPad (at least it connected and was recognized but I could not access pictures; I had the same issue with the data transfer adapter so I don't think this hub is at fault)
USB cable to a Canon camera
USB memory card reader
It would not read my micro SD card in the hub's slot initially but I got it to work.
Notes:
I did not test using the headset adapter with a wired microphone. I don't know if that is supported and don't have one.
You don't have to change the USB settings to get it to work. It just worked automatically.
The charging port is the one closest to the pigtail. The other port doesn't work for that purpose. The white lettering on silver case is hard to read so it is easy to miss which port is required for charging.
I didn't test it with HDMI because I cannot get the phone to work with the HDMI cable I purchased even when directly connected.
Here is the link again: https://www.amazon.com/gp/product/B01N0R1F1M/
*edit: got the card reader to work.
Hopefully we'll have a portables position under $45!
In the meantime I bought a Bluetooth receiver so in the car I can charge and use BT for audio to the car.
You could also buy a Bluetooth receiver and plug your earhones in it.
Sent from my SM-N920W8 using Tapatalk
ssnacks said:
It works completely! I tested a bunch of scenarios and am very happy. Only drawbacks so far are the thing is about half the size of the phone and the pigtail is about four inches.
Here is what works:
Rapid charging with a USB-C charger
Playing back music through the supplied USB-C audio adapter with and without charging attached
USB cable to an iPad (at least it connected and was recognized but I could not access pictures; I had the same issue with the data transfer adapter so I don't think this hub is at fault)
USB cable to a Canon camera
USB memory card reader
It would not read my micro SD card in the hub's slot initially but I got it to work.
Notes:
I did not test using the headset adapter with a wired microphone. I don't know if that is supported and don't have one.
You don't have to change the USB settings to get it to work. It just worked automatically.
The charging port is the one closest to the pigtail. The other port doesn't work for that purpose. The white lettering on silver case is hard to read so it is easy to miss which port is required for charging.
I didn't test it with HDMI because I cannot get the phone to work with the HDMI cable I purchased even when directly connected.
Here is the link again: https://www.amazon.com/gp/product/B01N0R1F1M/
*edit: got the card reader to work.
Click to expand...
Click to collapse
So the 4 inch pigtail goes into the phone, the PD charging port is connected to your Pixel wall charger, and the 3.5 USB c adapter connects to the data only USB C port?
Did you try to connect a keyboard, mouse, or USB Ethernet adapter to the USB A side? I am curious if those device work on the Pixel 2.
Thanks for your info.
bunklung said:
So the 4 inch pigtail goes into the phone, the PD charging port is connected to your Pixel wall charger, and the 3.5 USB c adapter connects to the data only USB C port?
Did you try to connect a keyboard, mouse, or USB Ethernet adapter to the USB A side? I am curious if those device work on the Pixel 2.
Thanks for your info.
Click to expand...
Click to collapse
Correct; that is how I connected it. I tried an AnyKey security key that presents a USB keyboard interface and that worked as a keyboard. I don't have a mouse or ethernet adapter to try. I did also try a USB memory card adapter and that worked too.
I'm using this one, which is the same as the one above but cheaper. https://www.amazon.com/gp/product/B075FHLTNM/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
It will charge the phone rapidly, play audio through the headphone dongle, read a micro SD card, read USB keys through the USB A ports, all at the same time, not bad for $14.
Moshi speaks!
FYI, this is response I got from Moshi rep, regarding the charge/play adapter.
While we do not know when exactly it will be available in Google's store, the same product is already available in our own web store - https://www.moshi.com/usb-c-digital-audio-adapter-with-charging
We are aware of that some users have been experiencing issues with this adapter, and we are already working together with Google on a solution for this. With that said, it appears that this only affects certain Pixel devices, as a clear majority of users (including our own product team and Google) haven't had any issues when testing multiple adapters on the Pixel devices in our office.
Although our team does not have a solution for the reported issues at this time, they are currently working with different software updates to see if this may resolve the issue. We are therefore not working on any hardware upgrades at the moment.
Hope this information helps.
Click to expand...
Click to collapse
Matterhorn said:
I'm using this one, which is the same as the one above but cheaper. https://www.amazon.com/gp/product/B075FHLTNM/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
It will charge the phone rapidly, play audio through the headphone dongle, read a micro SD card, read USB keys through the USB A ports, all at the same time, not bad for $14.
Click to expand...
Click to collapse
How large is it and how much does it weigh?
BaronInkjet said:
FYI, this is response I got from Moshi rep, regarding the charge/play adapter.
Click to expand...
Click to collapse
Interesting that this accessory isn't available for Australians. It doesn't even show up in Google's AU store. So annoyed!
Hi guys, I need to use my Pixel 2 XL as desktop PC so I need an hub that charge my phone and allow to connect keyboard, mouse and HDD to it at same time (regards video I'll connect it to TV throw Chromecast).
What do you think about it?
HTML:
http://www.ebay.it/itm/Techstick-USB-C-HUB-Adattatore-C-USB-3-1-hub-di-tipo-C-con-3-porte-USB-3-0-CARICABATTERIE-C-/152693040990
Hier
Someone find a solution or the new cable ?
Yours
Matterhorn said:
I'm using this one, which is the same as the one above but cheaper. https://www.amazon.com/gp/product/B075FHLTNM/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
It will charge the phone rapidly, play audio through the headphone dongle, read a micro SD card, read USB keys through the USB A ports, all at the same time, not bad for $14.
Click to expand...
Click to collapse
Hi, I'm very interested in this. Could you please check the link? It's not working. Or you could tell me the product name or reference or something that allows me to search for it....
Thank you very much in advance!
Erjimipey said:
Hi, I'm very interested in this. Could you please check the link? It's not working. Or you could tell me the product name or reference or something that allows me to search for it....
Thank you very much in advance!
Click to expand...
Click to collapse
Same here. I would love to find anything that will let me listen to my music with my wired headphones and charge my pixel 2xl at the same time. Google created this situation for us when they removed the jack. You would think they would at least have one solution. So if you could send me a new link or post it here, that'd be great!
Hi, may i know if there is USB OTG support for Note 10+? I cannot use OTG on my device, is it hardware problem? or software problem?
whsam89 said:
Hi, may i know if there is USB OTG support for Note 10+? I cannot use OTG on my device, is it hardware problem? or software problem?
Click to expand...
Click to collapse
CWXDA0007E said:
Works fine i use " Microsoft exFAT/NTFS for USB by Paragon Software " in the app store
Click to expand...
Click to collapse
This thread prompted me to check the OTG for myself, I have USB 3.0 dongle that I haven't used for a while - all is good, it works.
This dongle doesn't require additional, supporting apps, I just plugged it in and it showed as a drive right on.
I dont't know if it qualifies an OTG device, but I used my Flir cam with the Note 10+ and it works. Since it is a micro usb connection, I had to get a micro to USB C adapter and it specifically requires an OTG rated or compatible connector. The regular micro usb to USB C adapters don't work.
Voicebox said:
The regular micro usb to USB C adapters don't work.
Click to expand...
Click to collapse
It does work, every combination I tried. Not a necessity to even have a designated OTG dongle:
mzsquared said:
It does work, every combination I tried. Not a necessity to even have a designated OTG dongle:
Click to expand...
Click to collapse
For a Flir One? I was specifically talking about attaching a Flir. It is a specific requirement to make it connect to a USB C device.
For data transfer, charging, or other connections, I can use any micro usb to C adapter.
https://www.flir.com/support-center/flir-one/flir-one-device-compatibility/
Android Owners
Micro USB Android Owners: Have an Android device with micro-USB connector but want a USB-C device? Please be sure to add the Duttek Type C OTG Adapter, USB C Female to Micro USB Male OTG (On the Go), to your cart before purchasing. It can also be purchased from Amazon.com.
Click to expand...
Click to collapse
Voicebox said:
For a Flir One?
Click to expand...
Click to collapse
No, not specifically. I was referring to OP question in general terms. Sorry if I misled you.
i tried plugging in my USB OTG pendrive, there is no notification that it detects the drive. could it be a regional firmware problem?
whsam89 said:
i tried plugging in my USB OTG pendrive, there is no notification that it detects the drive. could it be a regional firmware problem?
Click to expand...
Click to collapse
Shouldn't make any difference, it's OS ability to do these things. In my case I just plug it into USB and it shows in "My files" app.
How is your pendrive formatted, is it FAT32? My microSD drives for Android are all formatted as FAT32 I even found a way to format 64 and 126GB to FAT32. Can't use it for full movies though. If you have another microSD around try to format it as FAT32 and see if that works.
Also, see if it helps when you change the default settings for connected USB devices.