Related
I disabled encryption on my nexus 5x following this thread http://forum.xda-developers.com/nexus-5x/general/guide-how-to-install-custom-recovery-t3231143
I tried flashing a custom ROM, Chroma, and it did not work. After booting the ROM, it started showing numerous apps errors (saying the apps couldn't start). I reflashed my backed up stock ROM using TWRP, but now I can't get into the phone because my PIN isn't working (I know I'm typing it correctly, it just isn't working). I tried connecting my phone to my PC to use ADB to delete the password, but it says I'm unauthorized and will not let me delete anything.
I'm currently unable to do anything with my phone. Can someone please help me get this working? This is my only phone, and without it I'm unable to make any calls.
Have you tried booting into fastboot and flashing the stock image or trying to mount storage in twrp, adding a new rom and flashing?
bdivs11 said:
Have you tried booting into fastboot and flashing the stock image or trying to mount storage in twrp, adding a new rom and flashing?
Click to expand...
Click to collapse
I was able to download this ROM - http://forum.xda-developers.com/nex...-optimized-stock-rom-aroma-installer-t3285805 - and push it to the phone using ADB, after enabling USB debugging in the Chroma ROM. The phone is still telling me there "is an internal problem with my device, contact the manufacturer". Thankfully, I had another ROM on my internal storage - if I hadn't, I'm not sure how I would have been able to get into my phone, since my PIN had been lost and I couldn't enable USB debugging.
Have you ever seen the "there is an internal problem with your device, contact the manufacturer" error?
This is a problem on the 5x and 6p, where restoring backups doesn't restore the correct pin. It's recommended you simply remove phone lock security before making a backup. Here is what I found on fixing it:
srnoth said:
After restoring the Nandroid, open ADB and:
rm /data/system/locksettings.db
rm /data/system/*.key
This should remove the pattern/pin completely, you'll have to re-secure your phone after
Click to expand...
Click to collapse
Sent from my Nexus 5X using Tapatalk
I'm about ready to throw this phone away. I can't seem to flash anything on it without it going into a boot loop and forcing me to restore. I never had any problems flashing ROMs on my Galaxy Nexus.
I just tried flashing CM 13 on it and it went into a boot loop for some reason. I'm also getting a screen on boot up that says my device can't be checked for errors, please lock the bootloader. Any way to disable that error? And I'm still getting the "your device has internal problems" after my ROM boots.
Hey all,
So, my smart self was attempting to flash Marshmallow 6.0 from 4.3 (rooted)...I did the same thing that was here on this THREAD and now my tab can only go into TWRP, but there's no OS installed because I wiped (and didn't make a darn backup....), but there are a few differences from the thread I referred to:
- I can get into my Bootloader
- I can get into TWRP
- I have the current TWRP 2.8.7
- I've tried the Nexus Toolkit from HERE, my device serial is recognized, but it states that I'm offline
- Because I'm offline, I can't push any files to my device through the tool
- When I'm in TWRP, my computer will recognize my tablet and I can actually get into folders and what not, but I can't copy/paste any files to flash within TWRP and I get an error
- Anytime I power down or reboot within TWRP, it tells me that I have No OS installed
- I can't use ADB (as far as I know) because my device shows that it's offline
Is there any hope that I can recover even back to 4.3?
Any guidance would really be appreciated. I have to step away because I'm frustrated and am angry at myself that I didn't make a nandroid.
Thanks in advance.
kevs888 said:
Hey all,
So, my smart self was attempting to flash Marshmallow 6.0 from 4.3 (rooted)...I did the same thing that was here on this THREAD and now my tab can only go into TWRP, but there's no OS installed because I wiped (and didn't make a darn backup....), but there are a few differences from the thread I referred to:
- I can get into my Bootloader
- I can get into TWRP
- I have the current TWRP 2.8.7
- I've tried the Nexus Toolkit from HERE, my device serial is recognized, but it states that I'm offline
- Because I'm offline, I can't push any files to my device through the tool
- When I'm in TWRP, my computer will recognize my tablet and I can actually get into folders and what not, but I can't copy/paste any files to flash within TWRP and I get an error
- Anytime I power down or reboot within TWRP, it tells me that I have No OS installed
- I can't use ADB (as far as I know) because my device shows that it's offline
Is there any hope that I can recover even back to 4.3?
Any guidance would really be appreciated. I have to step away because I'm frustrated and am angry at myself that I didn't make a nandroid.
Thanks in advance.
Click to expand...
Click to collapse
Are you using stock rom? Because if you are, I wouldn't even try. What with the widespread knowledge that stock might brick, some people insist on it. Otherwise, if you can get to the bootloader:
(1) Make sure it's unlocked (if you're not familiar, connect tab to PC, make sure fastboot works, then enter "fastboot oem unlocked" without the quotes then follow instructions on your tab);
(2) Flash bootloader 4.05 if you haven't already;
(3) Get a USB OTG thumb drive (you might need an OTG adapter for this); and download a Marshmallow-based custom rom in the Android Development section;
(4) Get into TWRP and mount USB OTG. You should see all the files on your thumb drive;
(5) Copy all data you care about to your PC;
(6) Wipe everything except USB OTG twice. Then go to Format and do it twice too. If yours is 32GB, it will take a while (30 Mins average depending on how much data);
(7) Flash rom, then Gapps.
You should be able to boot after that. Good luck.
(4)
graphdarnell said:
Are you using stock rom? Because if you are, I wouldn't even try. What with the widespread knowledge that stock might brick, some people insist on it. Otherwise, if you can get to the bootloader:
(1) Make sure it's unlocked (if you're not familiar, connect tab to PC, make sure fastboot works, then enter "fastboot oem unlocked" without the quotes then follow instructions on your tab);
(2) Flash bootloader 4.05 if you haven't already;
(3) Get a USB OTG thumb drive (you might need an OTG adapter for this); and download a Marshmallow-based custom rom in the Android Development section;
(4) Get into TWRP and mount USB OTG. You should see all the files on your thumb drive;
(5) Copy all data you care about to your PC;
(6) Wipe everything except USB OTG twice. Then go to Format and do it twice too. If yours is 32GB, it will take a while (30 Mins average depending on how much data);
(7) Flash rom, then Gapps.
You should be able to boot after that. Good luck.
(4)
Click to expand...
Click to collapse
Thanks for this! A few questions...
- Before I wiped my OS, I was running the Smooth ROM. Does this make a difference? - Regarding fastboot, how do I get into it? I can't use adb because it lists my tablet as Offline when I type in "adb devices"...
- My lock icon is unlocked at the Google screen, but it stops there since I currently have no OS
- Would I be able to skip to your Step 4 just use the USB OTG and mount the original 4.3 OS through TWRP?
- Should I just flash the OEM 4.3? Or should I load the Smooth ROM or whatever other ROM instead of the OEM 4.3?
Thanks for your continued help!
kevs888 said:
Thanks for this! A few questions...
- Before I wiped my OS, I was running the Smooth ROM. Does this make a difference? - Regarding fastboot, how do I get into it? I can't use adb because it lists my tablet as Offline when I type in "adb devices"...
- My lock icon is unlocked at the Google screen, but it stops there since I currently have no OS
- Would I be able to skip to your Step 4 just use the USB OTG and mount the original 4.3 OS through TWRP?
- Should I just flash the OEM 4.3? Or should I load the Smooth ROM or whatever other ROM instead of the OEM 4.3?
Thanks for your continued help!
Click to expand...
Click to collapse
It shouldn't make a difference what rom you flash now so long as you wipe and format everything inside TWRP. But you must make sure you have bootloader 4.05. 4.02 will not allow you to flash LL or MM successfully, and the system does not upgrade on its own no matter what rom you're flashing now.
Since you said you couldn't get TWRP to copy anything, I suggested that you use a thumb drive. Basically, if you turn the tab totally off, hold power + volume down for a few seconds, it should take you to the fastboot page (pic). Look to see what bootloader version you have there.
From here, you can basically flash anything. I recommended that you wipe and format first with TWRP because it happened to me a few times when for some reason, wiping alone still left some residual data that interfered with flashing newer roms.
Stay away from anything stock for the moment. God knows it has bricked more than a few devices. Download SkipsoftToolKit and flash from the fastboot page if you want an automated process. It has worked wonderfully in my experience. Ask if you have more questions. Have fun.
kevs888 said:
Thanks for this! A few questions...
- Before I wiped my OS, I was running the Smooth ROM. Does this make a difference? - Regarding fastboot, how do I get into it? I can't use adb because it lists my tablet as Offline when I type in "adb devices"...
- My lock icon is unlocked at the Google screen, but it stops there since I currently have no OS
- Would I be able to skip to your Step 4 just use the USB OTG and mount the original 4.3 OS through TWRP?
- Should I just flash the OEM 4.3? Or should I load the Smooth ROM or whatever other ROM instead of the OEM 4.3?
Thanks for your continued help!
Click to expand...
Click to collapse
Fastboot page
graphdarnell said:
It shouldn't make a difference what rom you flash now so long as you wipe and format everything inside TWRP. But you must make sure you have bootloader 4.05. 4.02 will not allow you to flash LL or MM successfully, and the system does not upgrade on its own no matter what rom you're flashing now.
Since you said you couldn't get TWRP to copy anything, I suggested that you use a thumb drive. Basically, if you turn the tab totally off, hold power + volume down for a few seconds, it should take you to the fastboot page (pic). Look to see what bootloader version you have there.
From here, you can basically flash anything. I recommended that you wipe and format first with TWRP because it happened to me a few times when for some reason, wiping alone still left some residual data that interfered with flashing newer roms.
Stay away from anything stock for the moment. God knows it has bricked more than a few devices. Download SkipsoftToolKit and flash from the fastboot page if you want an automated process. It has worked wonderfully in my experience. Ask if you have more questions. Have fun.
Click to expand...
Click to collapse
This is really helpful...I think I'm almost there.
I'm on a super old Bootloader (see attachment) so I'll need to update. I downloaded the update from this XDA Thread
More questions:
- Would I be able to push the 4.05 bootloader update and custom whatever Marshmallow ROM via the toolkit instead of from a USB OTG?
- If I was rooted on 4.3, am I still rooted so that I would be able to flash the custom ROM? I don't want to risk doing further damage, lol.
- I'm not home at the moment, so I can't test this out -- I'm thinking I couldn't put anything into my tablet last night because it was running TWRP and I didn't have it on the Fastboot screen. Would being in the Fastboot screen possibly allow me to copy/paste the zip files into my tablet?
- If there's nothing I need to copy from the tablet, would I still need the USB OTG? Or could I just use the Toolkit to push everything into my tablet and flash via TWRP?
Based on your answers to the above would this be the correct order:
1. Push 4.05 bootloader update and custom ROM via toolkit to my tablet
2. Flash 4.05 bootloader update within TWRP
3. *Per your earlier advice* Wipe everything except USB OTG twice. Is this cache, dalvik, system, and data? Or literally there's an option for "wipe everything" (I don't remember what I saw)?
4. Then go to Format and do it twice, too. I have a 32GB, so I'm expecting it to take awhile for the format
5. Flash ROM, then Gapps. I don't have any apps I need to put back so much as I need an OS to load, so I can add later.
Thanks again for everything!
EDIT:
Okay, so I came home and was able to use the Toolkit to recognize the device in fastboot mode. However, I wasn't able to push anything into the phone because the Toolkit said that I needed to be booted into Android.
The last thing I saw when I was in TWRP poking around was that I saw that I could install .zip files from USB OTG. Are either of these alright for me to connect my flash drive to and be recognized inside TWRP?
Example 1
Example 2
kevs888 said:
This is really helpful...I think I'm almost there.
I'm on a super old Bootloader (see attachment) so I'll need to update. I downloaded the update from this XDA Thread
More questions:
- Would I be able to push the 4.05 bootloader update and custom whatever Marshmallow ROM via the toolkit instead of from a USB OTG?
- If I was rooted on 4.3, am I still rooted so that I would be able to flash the custom ROM? I don't want to risk doing further damage, lol.
- I'm not home at the moment, so I can't test this out -- I'm thinking I couldn't put anything into my tablet last night because it was running TWRP and I didn't have it on the Fastboot screen. Would being in the Fastboot screen possibly allow me to copy/paste the zip files into my tablet?
- If there's nothing I need to copy from the tablet, would I still need the USB OTG? Or could I just use the Toolkit to push everything into my tablet and flash via TWRP?
Based on your answers to the above would this be the correct order:
1. Push 4.05 bootloader update and custom ROM via toolkit to my tablet
2. Flash 4.05 bootloader update within TWRP
3. *Per your earlier advice* Wipe everything except USB OTG twice. Is this cache, dalvik, system, and data? Or literally there's an option for "wipe everything" (I don't remember what I saw)?
4. Then go to Format and do it twice, too. I have a 32GB, so I'm expecting it to take awhile for the format
5. Flash ROM, then Gapps. I don't have any apps I need to put back so much as I need an OS to load, so I can add later.
Thanks again for everything!
EDIT:
Okay, so I came home and was able to use the Toolkit to recognize the device in fastboot mode. However, I wasn't able to push anything into the phone because the Toolkit said that I needed to be booted into Android.
The last thing I saw when I was in TWRP poking around was that I saw that I could install .zip files from USB OTG. Are either of these alright for me to connect my flash drive to and be recognized inside TWRP?
Example 1
Example 2
Click to expand...
Click to collapse
If you're comfortable using the ToolKit, you don't need an OTG cable. Connect your tab to PC, fire up ToolKit, complete all the prelim BS, then flash the bootloader from TK. Do not use TWRP for this. To do this, open the ToolKit folder in drive C:, locate the folder therein for zips, place the zip files (4.05 bootloader; TWRP; or custom roms) in there, and start to install. I am talking off the top of my head. But give me a few minutes to check the Kit again, and I'll give specific instructions. Bear with me, as I'm on Linux at the moment and therefore cannot start ToolKit (which is in Windows).
Things to do in order:
1. Download bootloader 4.05 (flashable zip HERE); and custom rom of your choice (zip format)
2. Locate the Unified Android ToolKit on drive C: on your PC and open it;
3. Locate the folder “put zip file to sideload here” → “Nexus 7 2013” then paste
bootloader zip and Rom zip in there;
4. Fire up Toolkit with tab connected; complete all the prelim questions;
5. Follow all the steps to install TWR 2870 (pic 8, choice 6);
6. Go to TWRP, wipe and format.
7. Go back to TWRP main page → “Advanced” → “ADB sideload”;
8 Go to ToolKit (pic 8) enter choice 16 (Look at the pics that follow for the correct choices) to
sideload Bootloader;
9. Flash Bootloader.
10. Go back to TWRP main page → Reboot → Bootloader. Once there check bootloader version 4.05;
11. Get into TWRP to sideload Rom; flash it.
graphdarnell said:
Things to do in order:
1. Download bootloader 4.05 (flashable zip HERE); and custom rom of your choice (zip format)
2. Locate the Unified Android ToolKit on drive C: on your PC and open it;
3. Locate the folder “put zip file to sideload here” → “Nexus 7 2013” then paste
bootloader zip and Rom zip in there;
4. Fire up Toolkit with tab connected; complete all the prelim questions;
5. Follow all the steps to install TWR 2870 (pic 8, choice 6);
6. Go to TWRP, wipe and format.
7. Go back to TWRP main page → “Advanced” → “ADB sideload”;
8 Go to ToolKit (pic 8) enter choice 16 (Look at the pics that follow for the correct choices) to
sideload Bootloader;
9. Flash Bootloader.
10. Go back to TWRP main page → Reboot → Bootloader. Once there check bootloader version 4.05;
11. Get into TWRP to sideload Rom; flash it.
Click to expand...
Click to collapse
Wow, this is awesome. Thank you so much.
I had already flashed TWRP 2870 before I wiped the OS, but I figured I'd try again using the Toolkit, but I got an error. I stopped here just in case.
Earlier, I tried flashing the zip for the bootloader the same way you just instructed, but my serial number turned into question marks?
Please see attachments. My pics are on the right side of the comparisons and I blacked out some of my serial number just in case for the TWRP pic.
Thanks again for the continued support!
kevs888 said:
Wow, this is awesome. Thank you so much.
I had already flashed TWRP 2870 before I wiped the OS, but I figured I'd try again using the Toolkit, but I got an error. I stopped here just in case.
Earlier, I tried flashing the zip for the bootloader the same way you just instructed, but my serial number turned into question marks?
Please see attachments. My pics are on the right side of the comparisons and I blacked out some of my serial number just in case for the TWRP pic.
Thanks again for the continued support!
Click to expand...
Click to collapse
Ok. One step at a time. Since you don't have an OS installed, ToolKit cannot complete the process of sideloading because it normally would have to use ADB from within the OS (which is absent) to restart the tab into recovery mode (TWRP). But if you're already in sideload mode within TWRP, it would detect it and transfer the file over to your tab. Let's go back.
(1) Fire up ToolKit (TK), go to sideload step, type the file name and stop. Get to fastboot page on your tab. Go back to TK and hit enter. TK should detect fastboot mode, download TWRP 2.7.1.1, take the tab into TWRP, tell you to go to sideload mode. Thereafter, it should detect this mode and transfer the file over. Then TWRP would flash the bootloader 4.05 automatically. If successful, sideload the rom the same way to flash it. Then upgrade TWRP back to 2870 with TK.
(2) Failing the above (because TWRP somehow doesn't function correctly), put the tab in fastboot mode, go to TK and follow the steps to flash TWRP anew. TK should detect fastboot and begin to flash the recovery. That done, go back and restart (1) above.
(3) If that still doesn't work, we have to resort to fastboot.exe and do it by command lines. But that's far ahead. Try the above first. We'll cross that bridge if we get to it.
I can send you an automated package that would upgrade the bootloader to 4.04 that I downloaded a year ago from Scott's Roms (thanks to him). It's good enough for Lollipop 5.1. The file is about 4MB and I'm not sure how we can do this through XDA. But if we ever get there, I'm certain we'll find a way. And smile, it's only a lousy tab.
graphdarnell said:
Ok. One step at a time. Since you don't have an OS installed, ToolKit cannot complete the process of sideloading because it normally would have to use ADB from within the OS (which is absent) to restart the tab into recovery mode (TWRP). But if you're already in sideload mode within TWRP, it would detect it and transfer the file over to your tab. Let's go back.
(1) Fire up ToolKit (TK), go to sideload step, type the file name and stop. Get to fastboot page on your tab. Go back to TK and hit enter. TK should detect fastboot mode, download TWRP 2.7.1.1, take the tab into TWRP, tell you to go to sideload mode. Thereafter, it should detect this mode and transfer the file over. Then TWRP would flash the bootloader 4.05 automatically. If successful, sideload the rom the same way to flash it. Then upgrade TWRP back to 2870 with TK.
(2) Failing the above (because TWRP somehow doesn't function correctly), put the tab in fastboot mode, go to TK and follow the steps to flash TWRP anew. TK should detect fastboot and begin to flash the recovery. That done, go back and restart (1) above.
(3) If that still doesn't work, we have to resort to fastboot.exe and do it by command lines. But that's far ahead. Try the above first. We'll cross that bridge if we get to it.
I can send you an automated package that would upgrade the bootloader to 4.04 that I downloaded a year ago from Scott's Roms (thanks to him). It's good enough for Lollipop 5.1. The file is about 4MB and I'm not sure how we can do this through XDA. But if we ever get there, I'm certain we'll find a way. And smile, it's only a lousy tab.
Click to expand...
Click to collapse
Let me just say, I'm so thankful for your help in all of this. Seriously. Thank you.
I kept on tinkering with the ToolKit and Fastboot kept on stopping everytime I switched to TWRP. I got to the point where TWRP showed 2.7.1 but the ADB Sideload kept getting stuck at the "Starting Sideload" prompt.
I went out and bought a $3 OTB USG cable and figured I'd give it a go since this sounded easier (theoretically). At first, I couldn't understand why the OTG wasn't recognized within TWRP. Then, I realized I needed to mount it within TWRP.
Once it mounted, I wiped and flashed the 4.05 bootloader zip. Success.
I went back into the Fastboot screen to verify 4.05. Success.
Went back into TWRP 2.8.7 and flashed a 6.0 ROM from these boards. Success.
Flashed Gapps. Success.
Rebooted. I'm now running a custom Marshmallow ROM and it runs so smoothly now.
Seriously. Thank you.
kevs888 said:
Let me just say, I'm so thankful for your help in all of this. Seriously. Thank you.
I kept on tinkering with the ToolKit and Fastboot kept on stopping everytime I switched to TWRP. I got to the point where TWRP showed 2.7.1 but the ADB Sideload kept getting stuck at the "Starting Sideload" prompt.
I went out and bought a $3 OTB USG cable and figured I'd give it a go since this sounded easier (theoretically). At first, I couldn't understand why the OTG wasn't recognized within TWRP. Then, I realized I needed to mount it within TWRP.
Once it mounted, I wiped and flashed the 4.05 bootloader zip. Success.
I went back into the Fastboot screen to verify 4.05. Success.
Went back into TWRP 2.8.7 and flashed a 6.0 ROM from these boards. Success.
Flashed Gapps. Success.
Rebooted. I'm now running a custom Marshmallow ROM and it runs so smoothly now.
Seriously. Thank you.
Click to expand...
Click to collapse
I'm glad you got it working again. Sorry you had to make a trip to the store. You should've waited for KT to switch the tab to TWRP 2711 for you. But it was not a waste of time anyway.
Hello everybody,
Here my problem :
I tried to install a custom rom, I failed. Now, my smartphone stay on the Asus logo screen. I tried to follow this - http://forum.xda-developers.com/zenfone2/general/guide-to-apply-ota-bootloop-rooted-zf2-t3127835 - to fix the problem, but when I connect phone and laptop, adb doesn't find the device.
If I continue and go in recovery mode (using TWRP), laptop can access the phone (I can see internal memory but not external).
And if I try the ADB sideload, there is no device again...
It's the first step, I don't see any other way to unbrick the phone...
Thanks in advance
http://forum.xda-developers.com/zenfone2/general/guide-brick-soft-hard-bricked-zenfone-2-t3284256 be lucky your phone is recognized
Hello,
Frist, thank you for your answer. I had already tried this way but nothing. Finally, I fixed the problems (detect phone and unbrick phone).
1-In TWRP, I loaded recovery.img, boot.img and droidboot.img. Reboot in recovery mod, but I had the dead droid... so I pushed on power and volume up till I have a new screen.
2-In this part, I did a Wipe/Factory reset (useless I think), reboot in recovery mode (still dead droid). This time I selected the line "update with adb" (with an ASUS firmware). Then I had a message who told me update adb sideload. I did it and it installed the firmware. The smartphone reboot correctly.
Now, I have the same problem I had yesterday. In TWRP, my external storage isn't detected...
you use stock recovery or custom recovery, if you use stock recovery external-storage won't detected
Hello,
Thank you Bar4, I explained above how I fixed my problems. Now I'm searching a way to make TWRP (TWRP 3.0) detect my external storage to install Cyanogenmod 13.0. If it's really not possible, I would try with CWM (I have seen it in your screen).
Edit : I guess custom, TWRP. It's why I don't understand why it doesn't allow me to mount SD card or doesn't detect this same SD Card.
Mara Udé said:
Hello,
Thank you Bar4, I explained above how I fixed my problems. Now I'm searching a way to make TWRP (TWRP 3.0) detect my external storage to install Cyanogenmod 13.0. If it's really not possible, I would try with CWM (I have seen it in your screen).
Click to expand...
Click to collapse
i use twrp 3.0 too, but external sd detected. no need to put on external storage, you can flash Cm 13 through internal storage
if you want to install custom rom it's better if you make a backup first, so if happen you failed when installing new rom or maybe you don't like it (new rom) you can go back to stock rom through TWRP restore
Ok, failed again...
Try a different rom or redownload the rom it might have been a bad download.
The error message says there is no updater script in the zip meaning it can't install anything as the updater script tells what directories to install the files if I seen it correctly that is.
Sent from my ASUS_Z00AD using Tapatalk
Mara Udé said:
Ok, failed again...
Click to expand...
Click to collapse
maybe the CM 13 zip file you have download corrupted, try to re-download and re-flash it again. if still failed try another rom
( i'm using AICP Rom "based on CM 13 too") try it, it's awesome Rom ---> do clean install wipe all except internal storage and external storage
http://forum.xda-developers.com/zenfone2/development/rom-c-p-t3285951/post64645756#post64645756
http://opengapps.org/ ( select x86-6.0-nano )
Hi,
Sorry for this late answer. As I failed to install those roms (CM13, Bliss), I'm going to stop here and wait for the Marsmallow update. But I'm happy my phone isn't brik anymore.
Thank you all.
Hi.
International version, Europe, S-off, Unlocked.
I think that I managed to write a wrong firmware on a stock, but rooted rom (im not shure if this is the cause, i followed the instructions and the log was ok). The result is that if I flash a rom (with TWRP), no matter which (L or MM), the phone boots, the initial setup starts, language selection ok, wireless connection functional, but when i reach the google account checking, even the email and password are ok, it continuously throw me back to the google email checking...
The situation now is like this:
- can enter TWRP, fully functional
- can enter download mode
- can enter bootloader mode.
The problem is that the phone is recognized by the computer only when in TWRP, no connection on download/bootloader. So I cannot use adb to push commands. When in TWRP i can put anything on internal or external storage and flash...
Please, help me with some advice in order to fix this.
Thank you.
Dont bother. Found the lollipop oficial ruu zip, flashed from the external card in download mode, system fully operational in 5.1 now.
Its an odd one to say the least. I had a similar issue when rooting my phone last night. After installing twrp I couldn't speak the phone for love nor money.
Tried a sideload in twrp and it told me that my adb.exe was too old for my phone so I updated it and then I had adb control at least.
Changed my twrp from newer to older and then everything seemed ok.
Sent from my HTC One M9 using Tapatalk
Hello,
I have a Mi Max 3 6GB/128GB which I got from the UK which arrived unlocked and with Global Stable ROM installed which actually updated to V10.3.3.0.PEDMIXM by OTA - I tested.
fastboot getvar anti shows failed, so I assume no Anti Rollback Protection, which I thought a little strange, it being MIUI 10 with (after OTA) June 2019 security patch.
I spent the last couple weeks setting up the phone to my liking (I have 300 apps installed) and finally finished yesterday.
Then I wanted to uninstall some Google/Facebook/Xiaomi bloatware using the excellent "Xiaomi ADB/Fastboot Tools".
I was pretty careful in my opinion to only remove the safe ones (the tool claims to only show you the safe ones) like Music, Video, MiPay, MiCloud, MiForum, MiSIM and all Facebook in the ADB section of the tool.
The I switched in fastboot and thought it would be a good idea to wipe Cache (nothing else).
Upon restart the Mi Max 3 first shows the black boot screen with unlock written at the bottom, then changes to the normal boot boot screen with MIU and the points at the bottom showing that it is busy booting. It stayed there for a while and I thought maybe it was rebuilding the cache and it took that long, but after 30 min still no luck.
Then I fired up the "Xiaomi ADB/Fastboot Tools" on my PC again and it told me the phone was in ADB mode, I could reboot into system mode, where the same thing happened - no progress in booting.
I cannot turn off my phone either, but I can switch from sastem boot (which gets stuck) into fastboot mode via ADB.
Would someone know what's wrong and what I can do to get my phone out of that bootloop while hopefully maintaining all my data and setups, on which I worked for weeks?
Thank you so much for your help!
P.S .: In case it could help: I could read out the phone properties of the Mi Max using the "Xiaomi ADB / Fastboot Tools" while it was softbricked, meaning the ro. init. persist. sys. and dalvik. values of the smartphone. I am happy to post them here, if requested.
Hi,
Do you have an SD card? If so, remove it, because as you cleared the cache, I think it might be a problem with encryption (lost reference).
In your case, I believe a reset will work again, but you will lose application configuration data. Via ADB you can backup files only.
If you do not have unlock bootloader, be very careful as you will not be able to flash TWRP or others.
Good luck!
Thanks, the phone came from the vendor with Global Stable ROM and unlocked. It may be an unofficial unlock, though I was able to install OTAs.
I don't have SDCard.
How can I do ADB backup?
I was able to flash official TWRP just a few minutes but it couldn't access data, maybe because it is encrypted. Now I think I will try and install latest Orange Fox r10 stable, which I think should be able to handle decryption, so that maybe I will be able to get at my date.
Any other advice?
Hi,
Now that you have TWRP, clear cache / dalvik from TWRP and try starting again, maybe start system.
About copy via adb follows a link below:
https://www.lifewire.com/use-minimal-adb-and-fastboot-4582201
in step 2
"
The command to move files from your computer to your phone is adb push.
To move files from your phone to your computer the command is adb pull.
"
Through TWRP you may also be able to back up. Go to (mount partitions) and select all partitions.
Make sure the TWRP MTP option is on, it will allow the device to be mounted via usb on your computer.
I use TWRP I use nijel8, it works very well.
https://forum.xda-developers.com/mi-max-3/development/recovery-twrp-3-2-3-1-nitrogen-t3866084
If you can't launch system, you will have to reinstall the Rom.
Good luck!
PS.
More help for adb.
https://forum.xda-developers.com/android/help/adb-fastboot-commands-bootloader-kernel-t3597181
Thanks for your advice!
I first used the official TWRP and I was able to flash it and start it.
But then the wipe of cache and dalvik failed.
And I could not mount data etc..
When I tried to repair the file system with TWRP I got error 255 - unable to repair data from fsck.f2fs.
Then I saw in your signature that you use nijel8's TWRP and I read that thread, and I started to understand, that my TWRP errors most likely originate from TWRP not being able to decrypt my partitions.
However, towards the end of the thread it seemed that nijel8 stopped working on that project and then Xiaomi once again changed the encryption in MIUI 10/Pie and so it was recommended first to use an obscure Chinese TWRP and then to move on to Orange Fox Recovery Project, which supposedly can handle the decryption better. So that's what I got and I am just about to install it and see if I can rescue or even repair anything.
If you have any other tips for me, I would be very grateful.
You have explored the possibilities well, at the moment I dont have more options regarding current system recovery / backup.
The encryption error resolves you by formatting the user partition by TWRP, in the option to format f2fs plus the installation of a custom Rom or Xiaomi.eu.
Look for tutorials and other reviews before testing these procedures.
Remember that there is a big achance of your ARB model as well.
Good luck.
PS. You can try dirty flash. Find an recovery Rom same version, and flash via TWRP.