Develop Bugs

BIG problem!! please help (no sd-card, no usb-connection AFTER recovery image update)

hey guys,
once every serveal months i check for updates for my rom, my recovery, and some apps.
yesterday i wanted to update tp the latest recovery (1.52)
now, the phone connected, driver was installed correctly (windows 7 32-bit)
i used the adb commands as posted in the recovery topic.
now it updated it, but after a few minutes using and wiping the phone, the usb-connection will not come to live (in any way, not even a "unknown device") and when the phone booted it gave a message: "SD removed, please place sd-card." while it has a 8 gb on there. luckily i backed up all data i needed from the sd before i flashed. so i used recovery to recreate partitions and wipe sd. but nothing works anymore... when i select ANY option in recovery wich needs SD access it immediatly gives errors.
also tried a nother microsd of 1 gb which did also not work...
about the usb-connection, it also does not work in Recovery.
but in the bootloader, it installs without any problems the well known "My HTC" device. using fastboot to boot to recovery image works, but again: no usb connection
please guys... help me... without sd-card i find my phone completely useless. (because of many documents and pictures for my work.)

I've had this problem and I had to send my Hero for repair, but it could be difficult if you have custom software in there, thry to flash original rom. Not sure though if it can be done through fast boot.
Also if you have to send it back, pretend to be an idiot and say it just went wrong. "I didn't do anything" could work.

Use fastboot to revert to a stock ROM (update.zip)

This sounds very similar to this issue on Modaco - http://android.modaco.com/content-page/299174/no-adb-no-sd/
Still ongoing, as I (pulser) am trying to guide the OP through making the goldcard (need to find another android phone to do this) and then we need to try an RUU somehow???

adwinp said:
Use fastboot to revert to a stock ROM (update.zip)
Click to expand...
Click to collapse
ok, and how?
thanks for reply.
i was thinking of letting it be repaired, but as you all say, unlocked spl, recovery image, custom rom. it does not look so good when they disver that.
but i am a stupid guy, so pretending to be stupid should be easy for me

If you are just interested in getting it back to stock for returning under guarantee to HTC, here is what I would suggest.
(No guarantees, as I haven't had to try this, and won't, for obvious reasons)
Get the stock RUU file from the hero that you have. I would recommend the oldest one that is available for you. (eg. a 1.73 one).
DISCONNECT your phone, and run the exe file(Yes, sounds strange, but bear with me).
Wait till the splash screen for the RUU is up, asking you to accept the EULA etc.
Now browse in my computer to your temp directory (C:\Users\Username\AppData\Temp in Vista/7, C:\Documents And Settings\Username\Application Data\temp in XP)
Sort the folders/files by date modified, and the most recently modified (or one of the most recently modified) folder should contain the RUU stuff. Inside a subfolder is a file called rom.zip. Copy this file to the desktop or another safe place. Once file is copied, close the RUU.
Now get your phone plugged in and booted into fastboot. (hold back + power)
Then use the command
Code:
fastboot flashall C:\Users\Username\Desktop\rom.zip
No guarantees, but it should get you back to the stock recovery, system and boot (NOT HBOOT or SPL, the actual boot.img that android uses to boot the kernel)

can i also flash custom rom with fastboot? to test if something is wrong with the rom?

That would depend on what version of SPL/HBOOT you have. If it is security off, then maybe. Otherwise I doubt it. You usually need an original, HTC signed file to flash using that method.
Feel free to give it a go, but I don't think it would work.

Please help - seemingly bricked M9 after attempting to restore to stock

Hi all,
I'm in desperate need of help here, I purchased an already modified HTC One M9 (which i wasn't aware of when purchased) and have attempted to flash it back to Stock.
well i've made a real mess of it and I really don't understand what to do now if someone could help it would be greatly appreciated. as the phone currently stands:
I've somehow removed the TWRP and it boots into standard recovery
Its been wiped as a pre-req of a guide i followed to install the stock image so it wont boot at all
I can't get my PC to see it when i boot into Download mode, so ADB and fastboot do not see it.
I'm tearing my hair out and really wondering where i can go from here.
Any help is greatly appreciated.
Many thanks.

Several things that would be helpful to know, if you can:
About your phone
- your phone's carrier variant (AT&T, T-Mobile, developer, et cetera)
- what you can boot into (recovery, bootloader, download)
- are you S-ON or S-OFF (boot into bootloader, see upper left hand corner)
About your computer
- what drivers have you installed on your PC
- whether or not HTC Sync is installed on your PC
Depending on what you can boot into, an RUU is your safest option - you'll need to download the RUU that corresponds to your phone's carrier variant. Barring that, if you can boot into download mode, you should be able to install TWRP - which may open up some other options.

The carrier is a UK model unlocked factory so i'd imagine just the standard EU model.
I can get into Recovery which is the standard Android one, Bootloader and Download mode
S-ON which is what confuses me, alot of these posts are regarding S-OFF devices
UPDATE: I managed to figure out i was running 2.10.401.1 so i downloaded the corresponding file for it. Formatted an SD Card to FAT32 and put the file on named 0PJAIMG.zip
It looked like it was working but failed on System.img, the device rebooted and now its stuck on white HTC screen with the Green HTC logo.
I can't turn it off, its just stuck there, any ideas?

andyobmonkey said:
I can't turn it off, its just stuck there, any ideas?
Click to expand...
Click to collapse
I'm sorry for the late reply. I hope you've had better luck in the meantime. If not, you can force a reboot by pushing and holding the power button & volume up.
If you can reboot, see what you can boot into. From what little research I've attempted on your carrier's software offerings, I'm not seeing an executable RUU (ie, installable from Windows). If there is one, that is by far the most dependable way to restore your phone to stock condition.
If you're intent on using the SD card install method (or it is the only way), you might consider ensuring that it is a reliable card. A read failure in the middle of a firmware update might explain the install issues you're having.
Beyond that, I'm afraid I don't have any further advice; I've reached the end of my experience! But if you still need help, please post an update and let us know what is going on.

Get a fresh SD card and pop TWRP or CWM on it along with the stock image. Automatic recovery and 3 wipe there we go. I only got boot loops when I was using a corrupted SD. Also, try both the ones with the underscores replacing spaces and regular names. One of them seem to be a decoy, as far as I can see.

andyobmonkey said:
UPDATE: I managed to figure out i was running 2.10.401.1 so i downloaded the corresponding file for it. Formatted an SD Card to FAT32 and put the file on named 0PJAIMG.zip
Click to expand...
Click to collapse
That file is corrupted and shouldn't be used. You can try reviving your phone by using this RUU service since there is no working 2.10.401.1 RUU you could use.

HTC One M9 Down - Need Help

HI all. I am in serious need of help please.
My wifes M9 is stuck on a screen with only a backlight. How this came about is after several failed attempts of updating the system via Wi-Fi. South Africa does not have a RUU available and only over the air updates are available
After about 2 days on the net, searching and reading and trying and failing I have determined the following.
What I have tried
1. Boot to Bootloader and tried recovery. This give me an Error - "Failed to boot to recovery"
2. Tried a Official RUU from HTC, this failed due to CID - Error wrong Customer ID
3. Learned a bit of ADB but this is no use as It seems USB debugging is disabled on the phone
4. Tried Custom ROM's via the SD card but this is blocked as the phone is **Locked** and **S-On**
5. Fastboot sees the phone as I can push reboot commands but because of locked status I can not do much
6. I can not get a unlock token as OEM is locked and this must be unlocked for ADB command to get token to get unlock.bin from HTCDEV
Basically it seems like I am at a dead end as it appears that I need to get into a boot status to enable debugging and enable developer mode from phone settings to be able to work from ADB
So here is the Million dollar question, How can I "wipe" the phone with a SD card boot image/loader or does any one know of a RUU-.exe for South Africa CID_016 that I could flash the phone with or possibly any other methods to get a ROM on it that we can use it again
I repeat, phone goes to blank screen with only backlight after HTC Logo, S-on, USB debugging seems to be disabled and it is in Locked status. I am able to boot in download mode and bootloader and fastboor does see the device. ADB devices does not see the phone, even after trying loads of different drivers, ADB USB ADB Interface etc etc
Please I need help

I'm suffering from the same fate. Except I had rooted it before, then I tried to update it to 5.1 and I relocked my bootloader. Android 5.1 loaded successfully but it got stuck while booting and now I can't unlock my bootloader. I have tried EVERYTHING!

https://www.google.com/url?q=https:...261000&usg=AFQjCNEBlBxkVmymaiJO1eaxKcHsKsE-wg
1.download this zip file
2. Rename the file to 0PJAIMG.zip (zero not O)
03. Copy the file to the root directory of a SD card which is formatted to fat32
04. Put the card into your phone and boot to Download Mode.
05. You will be asked whether you want to flash the file. Confirm with the volume up button.
06. Your phone will reboot at least one time. Depending on your current firmware version it may reboot to Android instead of rebooting to Download Mode. If this happens you just need to shut your phone down and manually boot it to Download Mode.
07. Flashing may take some time.
08. At the end you will be asked to push the power button. You phone will shut down if you do so.
09. Wait some seconds and then turn your phone on, again.
10. First boot may take a while.
11. Congrats! thanks to flippy

YES!!! OP I tried this and it works!!! My phone is finally alive again thanks to flippy's instructions.

Maybe I missed it, but I spent an entire day yesterday trying to find THIS solution. I didn't know it was this particular one, but I would have tried it first if I could have found it somewhere obvious. It really should be stickied as a "How to unscrew what though hast screwed"!
Thank you so much for taking the time to answer this Degerli43! I know virtually every answer possible is available on this forum, but finding it is the trick!
Note to anybody else doing this, be sure to locate the correct image file for your provider and area, as the link above and the one below may not be the correct one for you. I am a T-Mobile US customer and used this one -
https://www.androidfilehost.com/?w=...6ce7fb817fc1524b58f67fe05270f032107d2306abcd4
This worked perfectly after I could not boot or enter TWRP recovery. Anybody who can still access Android Recovery the Downloader should be able to use it to get un-bricked to a clean carrier state if the image file will take.

ksnax said:
Maybe I missed it, but I spent an entire day yesterday trying to find THIS solution. I didn't know it was this particular one, but I would have tried it first if I could have found it somewhere obvious. It really should be stickied as a "How to unscrew what though hast screwed"!
Click to expand...
Click to collapse
Did you ever visit the general section? :silly: There's a sticky thread with stock files and linked instructions for recovering TWRP backups and flashing RUUs. Read the OP, follow it's instructions to my google sheet and you will see where the steps that helped you out are taken from.
Sent from my HTC One S using XDA Labs

Can't find my way through the many guides, could use a lil'bit of help

Hey lads!
I am trying to root my HTC One M8, so I can get a finer options for sounds (and other advantages, aswell). I found this post https://forum.xda-developers.com/htc-one-m8/help/how-to-root-htc-one-m8-android-6-0-t3420748 about rooting an M8 with android 6.0. I'm writing this post, because I don't want to screw it up, so it seemed better to ask for help, before I do something stupid and brick my phone. I tried searching the forum, but after opening like 10 tabs, I lost my way. (I am using Windows 10, legit)
So, this is what I did:
1) Downloaded the Android Studio.
2) Via the studio, I downloaded the 6.0 platform.
3) And here is my first block: tried to install ADB, via Universal Naked Driver: I downloaded the ZIP, unpacked it, and while my phone was connected, tried to update its driver via the Device Manager. I got a message that it's up to date, and even tho I picked the 'I have disk' option, it wouldn't do anything. Now, I downloaded MiniADB v_1031, and when I ran the cmd from here, I could see my device with adb devicelist. I also installed HTC Sync, and used the driver installer from adbdriver.com, and it showed that I have the needed driver.
4) From the folder where I have unpacked miniadb, was able to run adb devicelist, and adb bootloader reboot aswell. But from that point, even tho I enabled developer options in my phone, and USB debugging aswell, my PC can't see the phone, only if I reboot to normal mode. When I am in fastboot USB, adb devices just says 'list of devices' and a blank line under it.
5) Tried to unlock the bootloader, and I got my identifier token. I am good to go then, I have every driver what I need for continuing from here?
5)b) Edit: Seems like I managed to unlock the bootloader.
---------
So if I understand it well:
From now on:
---------
6) Download the EU version of TWRP 3.0 from here (I am from the EU)
7) Use the cmd 'fastboot flash recovery twrp.img'
8) The site mention a key-combo to prevent the phone to go back to basic recovery, do I need this?
9) Do a backup via TWRP (is it going to be a simple option in the recovery? How big SD card do I need? Atm, I have 12 Gb one, gonna buy a 128 one in like 1-2 month)
10) Copy the SU.zip to my SD card and use a flash option in the recovery?
Sorry for any dumb question, I'm kinda scared bricking my phone, but at the same time, I would like to get the advantages of rooting.
So anyway, did I miss out on any step, screwed up anywhere, or smth like this?
Any help is much appreciated!

My comments to your steps/questions:
4 and 5) adb and fastboot are two different, but related interfaces. Don't feel bad, it's a common mistake to mix up the two (adb and fastboot). You'll really only need fastboot for rooting the phone. The step to "adb reboot bootloader" in the TWRP install instructions can alternately be done without that command, using the button combo to get to bootloader. But I think you must have figured that out by now, if you managed to unlock the bootloader.
In summary,
adb: needs USB debugging on in phone settings, only works when phone is booted in OS or alternately when booted into TWRP (last part obviously doesn't help, if you haven't installed TWRP yet).
fastboot: only works in bootloader-fastboot mode (will not work in OS or TWRP), does not need USB debugging on in phone settings.
6) The options are for download mirror locations (US vs. Europe - literally just where the download's server location is located), and do not specifically refer to different TWRP versions. The same TWRP version works for both US and Euro M8 models. What you downloaded is fine, so my comment is just FYI.
8) No, you shouldn't need this. I believe this comment refers to newer devices, and not specifically to the M8. I literally think the TWRP team has copy/pasted this statement to instructions for every device on their website, whether it applies or not.
9) Yes, this is a clear option once booted into TWRP recovery. Literally, on the TWRP main screen, you will see a big button labeled BACKUP. Tap it, and select system (ROM or OS) and boot.img, and also backup data if you like. The backup of system and boot.img will take around 2 GB. The backup of your user data might be much more, depending on your apps, etc. Although, if you just unlocked the bootloader, the phone should have been wiped, so you may not have much (if any) user data to backup.
10) While SuperSU 2.76 (mentioned in the thread you linked) should work fine, I would suggest using the latest stable version 2.79 from here: https://forum.xda-developers.com/apps/supersu/stable-2016-09-01supersu-v2-78-release-t3452703
Just put it on the phone, boot into TWRP, select INSTALL, select SuperSU 2.79.
---------- Post added at 12:42 PM ---------- Previous post was at 12:37 PM ----------
Rivyan said:
Sorry for any dumb question, I'm kinda scared bricking my phone, but at the same time, I would like to get the advantages of rooting.
Click to expand...
Click to collapse
Don't worry, you won't brick the phone (permanent damage) by unlocking the bootloader, custom recovery, root, etc.
Anything you do is recoverable/reversible, even if something goes wrong (especially if you make a TWRP backup of your current stock ROM before rooting).

My Honor 7x BND-L21 is quite broken, need help

Hello, sorry for the generic title, but i'm quite the noob about android modding and stuff.
Anyway I wanted to root my phone, just to stream some music to my stereo system. How naive I was...
So I unlocked the bootloader, installed twrp with adb and SuperSU with twrp. Everything was fine and phone was rooted but my past naive me thought "well let's try a custom rom, why not". So I went forth and downloaded some stuff from getdroidtips and what I understood is that all I needed to do was to do a wipe, then install the zip file via twrp. I did that and didn't work. After that I realized I made a crucial mistake: I didn't backup my phone from twrp, so I was there with no OS, quite panicked and frustrated. So I tried some other roms, finally I got one that worked, this: https://forum.xda-developers.com/honor-7x/development/openkirin-aosp-8-0-honor-7x-t3746257
It works but it's barebones and on boot it shows a message: "There's an internal problem with your device. Contact your manifacturer for details.". So, I tried recovering from HiSuite, recovery mode etc but nothing worked, I reinstalled SuperSU in the new OS via twrp to see if that would help somehow, but no. in the end I had the even more naive thought that maybe unrooting would allow me to repair via hi suite or something, so I mindlessly selected "complete unroot" on the SuperSU app, and this was the second big mistake, the process somehow ****ed up the twrp install and it no longer works. Instead, if I try to enter twrp with power button + volume up button, it shows the regular "your phone has been unlocked" screen and then comes up for a split second a black screen with, on the bottom half of the screen the "no command" logo, under it some lines of code that I can't read. It suddenly disappears and sometimes enters in a bootloop showing this screen and powering off every time.
If I keep power button pressed bootloop ends and the phone boots "regularly" in the openkirin OS.
I tried reinstalling twrp the same way I did the first time. No error on adb but same no command behaviour
So what I got now is:
kind of bootlooping no command window
openkirin OS with internal problem message
fastboot and rescue mode
it seems to work on adb (everything is fine if I type adb devices)
not working HiSuite recovery
not working Huawei eRecovery
not working download mode (I guess? the power+volume up+volume down combination)
Maybe I should mention I also did a data wipe (?? the option on the right next to "advanced wipe" in the Wipe screen, if I remember correctly) in twrp before installing openkirin, it was suggested on a yt video about how to install openkirin. And that, at a stage I tried using MultiTool but it gives me an error: "exception during a web client request. Error#9", while at the bottom left it says "downloading AdbWinUsbApi.dll..."
Sorry for the general noobishness and the bad english that might be there.
So, any tips for bringing back the phone to normal? Or at least repair twrp??
Please help, I hate needing to throw this phone away just because I wanted to stream some music and because of a couple of stupid errors

Sorry for not answering earlier. It seems, between TWRP and stock recovery, you have messed up I think. When there is no proper recovery it become difficult to bring back the phone. You should try to put it in fastboot mode first, by powering off, pressing the volume lower button and connecting it to computer. Try installing TWRP and flash a custom rom other than openkirin from there if possible. Fastboot is the choice to go if recovery is messed up.

sdivk said:
Sorry for not answering earlier. It seems, between TWRP and stock recovery, you have messed up I think. When there is no proper recovery it become difficult to bring back the phone. You should try to put it in fastboot mode first, by powering off, pressing the volume lower button and connecting it to computer. Try installing TWRP and flash a custom rom other than openkirin from there if possible. Fastboot is the choice to go if recovery is messed up.
Click to expand...
Click to collapse
No worries, I managed to fix it anyway. Some things might be obvious but I'll share what I did nevertheless, in case some other newbie finds himself in a similar situation.
So there was seemingly no way of reinstalling twrp nor the stock recovery. But luck came my way and by almost random clicking I found out that, even if multitool closed as soon as I clicked the ok button in the error message, if I simply ignored the error, the program worked just fine (as I write this I installed another version and it gave no error message). So I played with it a bit and found out that it can flash twrp and it does not need a file from you, it already has a twrp version ready to install. I did that and it worked. It looks like the first twrp file I used didn't work anymore or was someway corrupted by the countless things I tried. So, with twrp working again I was able to backup the sloppy openkiring OS and try the unbrick tool. So I browsed the internet for a guide. Guides always mention as the first step for unbricking using the VENDOR.img file located inside a full stock rom. Problem is, 99% of the times they provide a rom without the needed file. So after some tries I found a good complete stock rom with the VENDOR.img here: drive.google.com/file/d/1tjHefytEWbpuV1f4YjX8AaSMzT6jr8TQ/view but I can't remember which forum/site I found it in.
I followed the guide which involves:
-extracting the UPDATE.APP file contained in the provided zip with huawei extractor tool into an X folder on your pc
-copying the VENDOR.img file contained in the X folder, on the root folder of the sd card
-backing up OS (if there's any) via twrp (I had something like 50 partitions, I guess that was messing things up a bit, but for safety I backed them all up)
-doing an advanced wipe from twrp selecting ALL checkboxes BESIDES the SDcard of course
-flashing the vendor.img file via twrp selecting the "Vendor" partition when prompted
-downloading the update_full_[your model]_hw_[your region].zip file, in my case update_full_BND-L21C_hw_eu.zip
-extracting the UPDATE.APP file contained in update_full_BND-L21C_hw_eu.zip with Huawei extractor tool in some other folder Y
-looking for a file named cust.img/CUST.img/version.img/other_name.img (I don't know which other names it can have, I was lucky and had a VERSION.img file in it)
-rename the cust.img/CUST.img/version.img/other_name.img to CUST.img and copy it from the Y folder to the X folder
-boot your phone into fastboot mode
-connect phone to multitool via usb and select the "unbrick" tab
-there, Multitool asks for a folder, give it the X folder. There are some checkmarks on the Multitool "unbrick" page. 4/5 of them should become checked after the folder input. In my case the first 4
-then, simply press the unbrick button
-wait and pray (it can look like it freezes while it's copying the system.img file but wait, it'll be fine)
So I did that and it worked flawlessly, the phone booted slowly but surely into EMUI 5.1 with Android 7.0 I think and everything was fine.
At that point I had a working OS and a working twrp but wanted to go back to the OS I was used to, Android 8.something so, I tried connecting the thing to HiSuite and it automatically asked if I wanted to update, not to 8.something but to 9.1. I thought "SURE I DO!" and updated flawlessly (I thought 9.1 hadn't even been released here in Italy).
When it booted I found out the new OS was working like an antivirusless xp pc: it didn't recognise the SIM, it would crash every 20 seconds, app downloads got stuck at 99%, if it felt like it, it rebooted, pc connection was not stable. Besides, the update being "official" and installed from "trusted" sources (HiSuite), it completely wiped twrp.
And that was the "OH ****, here we go again" moment: no twrp and worse-than-ever-working OS.
So because of the new EMUI version, I guess, Multitool kept recognizing the phone but stopped offering its own recovery, eRecovery, twrp files available for flashing. I was completely frustrated with all of this and decided to give up, but I made the last effort: I tried the relock function in multitool. So I provided the key, pressed relock, waited, prayed, and finally cheered. It worked like a charm. Phone runs now on EMUI 9.1 with locked bootloader without problems. Finally
So I guess in the end I payed 4 euros for a nice update, a painful and frustrating trip into android modding and a lesson : never do android modding!
no, just kidding, don't do it just if you are a newbie AND you don't want to risk to throw the phone in the grabage.
In all other cases consider it carefully
Oh, and also, God bless the MT Team and Russia altogether!! thanks

Quite an experience. All the best. ?

Lol sounds fun. I've bricked my Huawei Mate SE/Honor 7x more times than I can count. I'm just awaiting my 9.1. I want my GPU Turbo! Is it as good as it's supposed to be?