I currently have a customer who has HTC One M9 at my house and it is the AT&T variant. They have it carrier unlocked so that it works on the T-Mobile service provider. Problem is they keep dropping GPS signal so I tried to check what their software version is. It looks like they have software version 5.0. I tried to use the are ruu to update it, but every time it gets into download mode to start loading the file or bootloader mode rather it just tells me that the phone is not the right software. I'm using the AT&T ruu. Is there any reason why this is not working? I also tried the carrier unlocked version but the phone is clearly of AT&T pedigree
Cid and mid needs to be known
Currently running super Sid but previously was AT&T Sid. I can change the SIDS anything I want with Chimera tools. I don't know what the mid is though I'm not even sure what a mid is
Changing the CID without changing the firmware has the same effect as drinking snake oil. In addition the SuperCID prevents the M9 from accepting OTAs. You should take a look at the ReadMe thread. All information you might need are either there or linked in the further reading section of that thread.
I personally don't think that people should use such tools as the one that you mentioned. You don't know what kind of commands the tool is actually using so that you don't have any control about what's happening to the phone. (Not to mention that you don't learn how to fix a problem if the tool fails due to whatever reason.) Most of the features that tool is offering for HTC devices are available for free and don't take longer than a handful of minute if done manually.
Sent from my HTC One M9 using XDA Labs
If I load the t-mobile cid will it take the tmobile ruu?
CID 11111111
MID OPJA11000
Need this to run on tmobile network. It is an AT&Tb phone
No, changing the CID is not enough since the MID of the T-Mobile US variant isn't the same as the one for the AT&T version. As said before, please read the ReadMe thread. The RUUs are sorted by MID and CID, there, and the conversion guide tells you what to do for converting one version of the M9 to another. Be aware that the US T-Mobile variant RUUs are not the ones at the top of the download section. Those are the ones for T-Mobile Germany and T-Mobile Poland.
I converted it to an AT&T unlocked
Related
Im not sure i understand everything perfectly. I have just got my HTC10 from tmobile, so its a tmobile us branded htc 10. Unlocked bootloader, S-off'd and did some other crap. Clearly tmobile is lagging on firmware releases. So my question is, can any firmware be flashed on my device now?(like the RUUs on htcdev.com)? Say for specific example, the unlocked/developer RUU? Im sure i would have to write supercid, but other than that, is this a common practice to flash firmware not from the carrier on carrier-branded devices? Will this mess anything up? Thanks
If the "some other crap" that you did was change the cid and mid to match the US unlocked HTC 10 then yes, you can flash the US unlocked RUU. For any RUU you want to flash, make sure the CID and MID match that RUU or it'll give an error. Don't use super CID.. Use the correct CID/MID for the RUU. It won't mess anything up.. You'll still have your Wi-Fi calling and VoLTE with T-Mobile. Enjoy the updated software once you're done.
Sent from my HTC 10 using Tapatalk
Hi ,
I have HTC 10 Europe with rom version 1.95.401.4
I tring to flash on my HTC 10 another firmware ,stock U.S firmware from HTC sources,(just want to get most updates fast)
I have been noticed that i can not change firmware beetween regions .
There is way to flash U.S Unlocked/Developer firmware on my device?
if so how can i do that ?
Thanks
Search for the de-branding thread for instructions. Need to purchase s-off for 25$ to do it.
Basically you need to be S-OFF. That is the only way to do it, even then it can be a pain in the ass. If the reason you're doing it is to try and update to Nougat, you're better off just waiting for it tbh. The ROMS for US will be specific for the carriers and types of radios they use over there. Europe will have differences and it may create problems for you (unless you are already in the US and for some reason aquired a non-US phone). There may even be small hardware diffferences between model numbers (US is 2PS65000 I believe, Europe is 2PS620000). I am S-OFF, fully stock, de-branded, unlocked, and have HTC WWE CID (HTC__001) after changing it from my carrier previously (H3G__001).
It also goes without saying, US doesnt always get updates first.
silegeek said:
Basically you need to be S-OFF. That is the only way to do it, even then it can be a pain in the ass. If the reason you're doing it is to try and update to Nougat, you're better off just waiting for it tbh. The ROMS for US will be specific for the carriers and types of radios they use over there. Europe will have differences and it may create problems for you (unless you are already in the US and for some reason aquired a non-US phone). There may even be small hardware diffferences between model numbers (US is 2PS65000 I believe, Europe is 2PS620000). I am S-OFF, fully stock, de-branded, unlocked, and have HTC WWE CID (HTC__001) after changing it from my carrier previously (H3G__001).
It also goes without saying, US doesnt always get updates first.
Click to expand...
Click to collapse
Thanks for the answer.
Thoght it will be easy .
I will wait for the offical update ....
Hi there, I picked up an HTC One M9 for a good price from China and overall I am pretty pleased with it however it seems to be wired for CDMA updates only and so it is stuck on Android 6.0, as attempting to update it says that updates are only available over CDMA networks.
Rebooting to bootloader It tells me
*** Software status: Official ***
*** UNLOCKED ***
*** S-OFF ***
I have tried using a wide selection of RUU files to update the phone and pretty much every one of them gives me an error. For example RUU_HIMA_UL_N70_SENSE80_ATT_MR_NA_Gen_Unlock_4.30.617.12 takes me through the install process, reboots the phone to the bootloader and after several warning screens tells me that it will update from 3.37.605.19 to 4.30.617.12 The phone shows it is uploading, but then quickly ends up frozen whilst the PC dialog shows:
ERROR [132]: SIGNARURE ERROR
Exiting reboots the phone back to the starting condition.
I've tried all of the RUU files that I could find (with a higher version) and had the same error. Not sure where to go next, any help very gratefully received!
Cheers,
..alex
Please take a look at the ReadMe thread. It will tell you why you can't use 4.x RUUs on a phone with a 3.x firmware and why you should never try to flash a GSM RUU on a CDMA device.
Sent from my HTC One M9 using XDA Labs
Thanks for your response and the redirect to the readme I can see that the RUU update path is not going to work. Is there any way to switch this phone to GSM or is it permanently stuck add a CDMA device?
Cheers
..alex
It's permanently stuck on the CDMA firmware. Those are two completely different technologies.
However, the CDMA M9 supports some GSM frequencies so it shouldn't be completely useless for you. You probably just won't get LTE with it.
In regard to android updates: I don't know whether there already is an android 7 update for the verizon variant (verizon is super slow). If there is you might be able to update the phone with an unofficial firmware pack (like the ones that Sneakyghost provides) since you already have S-OFF. Although Sneakyghost himself doesn't provide ones for verizon phones you might find some in the verizon M9 forum. Afterwards you would only need to re-flash the corresponding 4.x RUU (assuming that you want to stay on the stock rom - otherwise you could directly flash whichever custom rom you want to use).
Sent from my HTC One M9 using XDA Labs
If I were to pursue this strategy would the end product be a phone that had flipped to GSM and could connect to 4G? It feels like the difference is not a hardware one - that is the phones must have the hardware to go either way right? Or do they have a different comms chipset?
Cheers,
..alex
Flippy498 said:
It's permanently stuck on the CDMA firmware. Those are two completely different technologies.
However, the CDMA M9 supports some GSM frequencies so it shouldn't be completely useless for you. You probably just won't get LTE with it.
In regard to android updates: I don't know whether there already is an android 7 update for the verizon variant (verizon is super slow). If there is you might be able to update the phone with an unofficial firmware pack (like the ones that Sneakyghost provides) since you already have S-OFF. Although Sneakyghost himself doesn't provide ones for verizon phones you might find some in the verizon M9 forum. Afterwards you would only need to re-flash the corresponding 4.x RUU (assuming that you want to stay on the stock rom - otherwise you could directly flash whichever custom rom you want to use).
Sent from my HTC One M9 using XDA Labs
Click to expand...
Click to collapse
You cannot flash a GSM firmware on a CDMA device (or vice versa) without damaging it unrecoverably. The partition layout isn't the same. All you can do is upgrading or downgrading your firmware but switching your SKU (even if it's another CDMA one*) will result in damages. The difference between GSM and CDMA phones lies within their hardware and their software. Although newer CDMA phones support some GSM frequencies and are therefore able to connect to some GSM networks they still aren't able to get G/2G/3G/H+/LTE on every carrier's network.
* Not even the different CDMA variants of the M9 share the same partition layout.
I've bought second hand m9 , this last was flashed and rooted because I found supersu integrated with it, the problem is some settings are missing comparing with regular m9 like mobile network sharing for example, is there a way to fix the problem?
First of all, never use a second hand device without reinstalling the whole OS. I factory resetted my M9 right after buying it. (And rooted it, etc...)
Just look at you CID and MID and find the latest RUU for your phone and install it.
Maybe the person that had it before removed the certain settings, because the HTC settings app is quite modular from what i've seen. The settings app is split into many apps. Probably when debloating it he accidentally deleted that. (For example, if you install HTC's chinese performance management tool, a new setting will pop up in the settings app. Same with Sense Toolbox)
Or if is already rooted, just install S-Team ROM (sun_dream's ROM).
where can i find cid mid numbers?
and what is the best rom should i install?
leo-pard said:
where can i find cid mid numbers?
and what is the best rom should i install?
Click to expand...
Click to collapse
I suggest you first install stock rom.
I have been searching for a while for how to update the rom image
I checked my phone and I found the following information:
***unlocked***
htc_himawhl pvt s-off
cid-11111111
os-3.41.651.4
feb 3 2016
I believe that my phone was for developers, so I downloaded devRUU "HTC One M9 4.30.617.12" from HTC website and I tried to install it but I got error 132 (get the correct RUU...)
I switched to another RUU "HTC One M9 4.27.651.4", but I got the same error error 132
I've tried to get my CID and MID numbers using CMD but I've got nothing, it shows me:
CID:
MID:
nothing, blank, no information. after some research I realized that it was CID free "unlocked"
the main question is, how can I upgrade my system to get my full setting options? I appreciate your help
Forget whatever you read. It's wrong and you should thank whichever god you believe in that the dev edition RUU didn't get flashed.
First of all, you own the Sprint version (SKU 651) which is a CDMA device. The dev edition RUU (SKU 617) is meant to be used on GSM devices only. Those are two completely different technologies used by different US network carriers. Flashing GSM files on CDMA devices or vice versa leads to unrecoverable hardware damages in most cases since those versions have different partition layouts. It's not even safe to flash Verizon (another CDMA carrier) files on a Sprint device or vice versa since even these models use different layouts.
Second, there is no such thing as an HTC phone without CID. The dev/"unlocked" version has CID BS_US002. If the app doesn't give you any info then it's not working. In addition, it's recommended to use the current firmware version for finding the correct RUU instead of MID and CID. With the latter you still need to guess a lot whereas the former gives you the exact version of the RUU that is flashable.
Btw, you should get rid of the SuperCID your phone is currently using (11111111) since it causes more problems than benefit.
You'll never be able to flash a 4.x RUU on a phone that uses firmware 3.x. The encryption keys changed between those two firmware versions. You'll need to update the phone by using unencrypted files (OTAs or - if you have S-OFF - custom made 4.x firmware packs). You should have S-OFF since getting the SCID is impossible without it (the same applies to getting rid of it). However, Sneakyghost doesn't support CDMA devices so I don't know whether there are any custom firmware packs you could use.
If I were you I'd take the time to carefully read the ReadMe thread and to make sure that I understand everthing. Then I'd use the conversion guide for getting rid of the SCID (you can ignore the warnings if you use a RUU for your current SKU 651). Afterwards, that phone should be able to receive 4.x OTAs so that it can get updated to the latest firmware.
Sidenote in regard to the original question with the missing settings: I could be wrong but if I'm not mistaken then it's completely normal that Sprint models lack the network sharing option since that carrier doesn't allow it and therefore asked HTC to remove that option.
what a wonderful explanation, it's all clear, thanks a lot!
one more question,
how do i know for sure that my M9 is CDMA and has not been only changed to sprint rom version ?
I've googled for the differences between CDMA and GSM, I found that CDMA network basically depends on the device itself, whereas the GSM network depends on the SIM card. However the Sprint HTC One M9 had a nano sim slot in it in order to connect to GSM 3G and 4G bands, which were not devloped yet in CDMA networks. if this is right, could I still use my GSM network through 3g or 4g?
Since LTE is a GSM-only technology there are not many "pure" CDMA devices, anymore. Nowadays, all CDMA phones support Sim cards and some GSM frequencies. However, that doesn't mean that you can get reception with every GSM carrier if you own a CDMA phone since different carriers use different frequencies. In addition, one and the same carrier might even be using different frequencies for its network depending on the location. You'll have to try out whether you can get mobile reception with your current carrier and that phone.
Assuming that no one tinkered with the hardware of that phone, you can find out its original MID by taking a look at the engraving on the bottom of the back side (c.f. the FAQ of the ReadMe thread).
Sent from my HTC One M9 using XDA Labs
It's written :
Model:0PJA120 FCC ID:NM80PJA120 M9u
2200
actually the phone can read my gsm sim card, I have no problem with that except I want to make sure if it is CDMA version or not
I've looked everywhere in the internet but I didn't find a direct answers
Mhm... That MID belongs to the T-Mobile US (GSM) model. But your firmware is a CDMA one. The question is whether your phone still has its original backplate or not. Normally, cross-flashing GSM and CDMA will make the phone failing to recognize sim cards.
You could contact HTC and ask them whether they can tell you what kind of M9 you own with the help of its IMEI.
Sent from my HTC One M9 using XDA Labs
yes it does recognize my sim card
thank you very much for your help:good:
I'll try to contact htc to solve this contradiction
I'm facing same problem....
Dear Leo-pard,
could you please help me out....is your problem solved after chatting with HTC Customer care..
I'm facing same problem as my HTC M9 is also not showing Mobile Network Sharing Option....
Please help me out also....
I'll be waiting for your reply...
A lot of carriers charge extra for hotspotting. More than likely mobile network sharing will be off because the carrier wants you to pay for it. What I don't know is if it is coded into the firmware or not.
Hey @Flippy498
I have a sitting HTC m9 and like you said have missing mobile network sharing settings. My phone is s off with locked bootloader.
What can I do to use USB tethering it mobile hotspot? Can I use a third party app to use them?
Thanks
Hi folks, I've read the Flippy498's M9 ReadMe thread and understand most of it but still need a helping hand from you more experienced folk in order to update the software on the M9.
I bought a "like new" M9 a few months ago from a seller somewhere in Asia (Hong Kong I think). I know, bad idea, but I had a tight budget. The phone has lollipop - I've been happily using it in the UK but now a few apps I need won't install (apps to access work email etc. since lollipop isn't supported by these apps).
I know the phone has been tinkered with (S-OFF and supercid) - but I'm not sure why (to unlock?). I get an OTA update notification, but it won't apply (see screenshot). I've included a couple more informational screenshots below.
Bootloader locked, S-OFF
0PJA100 (this is written on the back of the phone as well - no reason to believe it's a frankenphone)
htc_himulatt PVT S-OFF
CID-11111111
LK-1.0.0.0000
RADIO-01.01_XXX
OpenDSP-XXX
OS-2.11.617.258
My situation might be similar to these folks, neither of who had any luck:
https://forum.xda-developers.com/one-m9/help/unlock-bootloader-android-6-0-software-t3741019
https://androidforums.com/threads/phone-wont-update.1157270/
I don't want root (banking apps fail). I might be wrong, but I think my work apps won't function with TWRP - rather not chance it.
I'd like to update the phone's software as simply as possible. (Note that the Ebay listing said that they recommend I do not update - not sure why)
Questions:
I'm aware that the CID is incorrect. If I change it to something else (what?) - will the update work? If so this seems to be the simplest method.
Is this a CDMA phone?
Is it possible that the phone becomes locked after updating? Right now I can use it in the UK and 4G works.
Would you recommend some other method? Like changing the CID and flashing an RUU (which one will work? I'm aware that version numbers need to match.)
The phone seems to default to Canadian English - not a big deal - would I be better converting it to another edition?
Thank you very much for any help/advice you can offer. I've rooted, installed custom recoveries and flashed loads of ROMS (on an S3 - nothing as complicated as the M9). If any further information is required I will provide this ASAP.
You didn't buy a CDMA device and your issue isn't similar to the ones you linked.
At the moment, there are two problems that are preventing your phone from being able to install OTAs:
You're using the SCID (11111111). Unlike on previous HTC models, OTAs will abort when they notice this CID.
Your current firmware doesn't match the system version you're using. The firmware that is shown in download mode belongs to the developer edition (SKU 617). The OTA on the other hand belongs to the Canadian Telus version (SKU 661). OTAs will abort if they notice such a mismatch as seen on the pic that shows your phone's stock recovery.
In addition to that, the firmware with SKU 617 actually belongs to the 0PJA11000 (hima_ulatt - a US model) while you own the 0PJA10000 (hima_uhl - the International model) according to the engraving on its backside. Since both are GSM versions and the differences are almost non-existent, cross-flashing is absolutely no problem, though.
I'd recommend you to follow the conversion guide that can be found in the ReadMe thread. Use one of the European RUUs that share the same decryption keys as your current firmware. (In other words a 2.x or a 3.x RUU for SKU 401.) Due to problem 2 you won't be able to solve your issue just by changing the CID. You'll need to flash a RUU for fixing that.
Since SKU 401 belongs to the unbranded European firmware you don't have to fear a sim lock or something similar.
Flippy498 said:
You didn't buy a CDMA device and your issue isn't similar to the ones you linked.
At the moment, there are two problems that are preventing your phone from being able to install OTAs:
You're using the SCID (11111111). Unlike on previous HTC models, OTAs will abort when they notice this CID.
Your current firmware doesn't match the system version you're using. The firmware that is shown in download mode belongs to the developer edition (SKU 617). The OTA on the other hand belongs to the Canadian Telus version (SKU 661). OTAs will abort if they notice such a mismatch as seen on the pic that shows your phone's stock recovery.
In addition to that, the firmware with SKU 617 actually belongs to the 0PJA11000 (hima_ulatt - a US model) while you own the 0PJA10000 (hima_uhl - the International model) according to the engraving on its backside. Since both are GSM versions and the differences are almost non-existent, cross-flashing is absolutely no problem, though.
I'd recommend you to follow the conversion guide that can be found in the ReadMe thread. Use one of the European RUUs that share the same decryption keys as your current firmware. (In other words a 2.x or a 3.x RUU for SKU 401.) Due to problem 2 you won't be able to solve your issue just by changing the CID. You'll need to flash a RUU for fixing that.
Since SKU 401 belongs to the unbranded European firmware you don't have to fear a sim lock or something similar.
Click to expand...
Click to collapse
Thank you Flippy498 - that's just the type of clarification I was looking for! I'll follow your instructions and let you know how I get on. (It might be a few days before I get the block of time I need to do this properly, but I will certainly feed back.) Thanks again.
Hi Flippy498 - just thought I'd check in and let you know how I got on. I followed your instructions exactly and everything is sorted now - I have a fully updated stock M9.
In the unlikely event anyone else finds themselves in this particular situation, and for reference - here are the steps I followed:
Installed a fully functional adb/fastboot environment as per the ReadMe section "Setting up ADB/Fastboot/HTC_Fastboot correctly".
Changed the CID and MID (as outlined here "How to convert your M9 to a different version": https://forum.xda-developers.com/showthread.php?p=71421945#post71421945). For reference the CID I used was HTC__001, the MID was 0PJA10000.
Used the 2.10.401.1 RUU (https://www.androidfilehost.com/?fid=24269982087011324)
Used the SD card method outlined in the ReadMe section titled "RUU Section"
Flash went perfectly. OTA updates all came through as expected. Job done!
Thank you very much Flippy498 - your explanation was crucial to allaying my fears of bricking the device, and giving me the confidence to go through with it. :good:
r2mahara said:
Hi Flippy498 - just thought I'd check in and let you know how I got on. I followed your instructions exactly and everything is sorted now - I have a fully updated stock M9.
In the unlikely event anyone else finds themselves in this particular situation, and for reference - here are the steps I followed:
Installed a fully functional adb/fastboot environment as per the ReadMe section "Setting up ADB/Fastboot/HTC_Fastboot correctly".
Changed the CID and MID (as outlined here "How to convert your M9 to a different version": https://forum.xda-developers.com/showthread.php?p=71421945#post71421945). For reference the CID I used was HTC__001, the MID was 0PJA10000.
Used the 2.10.401.1 RUU (https://www.androidfilehost.com/?fid=24269982087011324)
Used the SD card method outlined in the ReadMe section titled "RUU Section"
Flash went perfectly. OTA updates all came through as expected. Job done!
Thank you very much Flippy498 - your explanation was crucial to allaying my fears of bricking the device, and giving me the confidence to go through with it. :good:
Click to expand...
Click to collapse
This description was very uselfull to me, this summer (July 2021) I purchased 2 brand new HTC One M9 in Sealed packages from a Danish auction house, they was both european phones, but both of them had the folloving configuration:
Locked bootloader
S-ON
Developer version 3.35.617.12
Supercid 11111111
MID 0PJA11000
I need firmware 4.x in order to use the latest Android 11 version of one of the following: crDroid, LineageOS or Ice Cold Project.
I could have lived with the developer version but the super CID 11111111 prevented me from getting to version 4.x
I did the following.
1) For the first phone I registered with HTC developer site in order to get the code to unlock the phone, later on I learned the Sunshine app also unlock the phone, much easier Also I did not need to root the phone because Sunshine App did that temporary, for 25$ this app did some very dificult stuff for me in an rather easy way.
2) From the RUU section I downloaded and flashed 3.35.617.31 on the first phone (still with S-ON) using the SD card method, because there was an OTA file that could bring me to 4.14.617.6, but the update complained about the Super CID 11111111, there was no way around it, I had to use Sunshine app.
3) The first phone I S-OFF'ed with Sunshine locked at the white HTC boot screen, I was unable to power it down, I reached out to support and they adviced med to power the device down by pressing all 3 keys VOL Up/Down and power for 60 seconds and then uninstall Sunshine app, reboot the phone and install it again, then everything went as expected.
4) Now I wanted to get to a 3.x version that will allow me to change to 4.x via OTA file
4a) for both phones I used the SD Card method
4b) for the first phone I had already flashed 3.35.617.31, now I changed the CID to BS_US001
4c) the other phone I changed to H3G__G04, MID to 0PJA10000, and flashed 3.35.771.12
5) Now I was reddy to get to 4.x version
5a) For the phone with version 3.35.617.31 I loaded the OTA file from SD Card to 4.14.617.6, after that I changed the MID to 0PJA10000 and the CID to HTC__001 and flashed a european RUU 4.28.401.3
5b) For the phone with version 3.35.771.12 I loaded the OTA file from SD Card to version 4.30.771.2
5c) For both OTA files I experienced that the script stopped at the last line before completion, I had to power off and run the OTA file once more, where both cases completed as expected.
6) now I have two phones that are ready to go to Android 11, I expect that I wil leave the one with version 4.30.771.12 with the original latest HTC version and keep it as a spare phone, the other one I will use to load Android 11 and Gapps
I hope the can be usefull to someone else in a similar situation.