Related
why my camera sometimes can't be used and there is a notification "Camera Failed".?
please help me...
I had this issue too..just reboot your phone and everything will works normaly again..
i hv this issue alsi when i'm using lower class memory card. now using class 10 16gb card with bionic rom without this camera failed problem.
Sent from my GT-I8150 using XDA
rinopermana said:
I had this issue too..just reboot your phone and everything will works normaly again..
Click to expand...
Click to collapse
i have reboot my phone, but that problem happen again for a next time.
please help me...
shade2112 said:
i have reboot my phone, but that problem happen again for a next time.
please help me...
Click to expand...
Click to collapse
Try to flash a new Camera.apk to you phone. Hopefully that is only software problem.
yewsiong said:
Try to flash a new Camera.apk to you phone. Hopefully that is only software problem.
Click to expand...
Click to collapse
how to flash a new Camera.apk ?
I really don't know.
I had the same problem and I solved it by uninstalling oovoo....it's only a case???
shade2112 said:
i have reboot my phone, but that problem happen again for a next time.
please help me...
Click to expand...
Click to collapse
do u have cwm on ur phone? reboot ur phone into recovery then choose advance and choose fix permission, wait until finish, then reboot ur phone after it finish
Unfortunately I have the same problem. My camera does not work anymore. I just receive the message "Camera failed". I still have the stock rom installed and I did not modify too much (I just installed some apps). I have already reset the phone to factory settings which did not solve my problem. Does anybody have an idea what I could try to fix the problem?
Please help...
I just have formatted my device and flashed it with a stock rom. Unfortunately it did not solve my problem with the camera. I still got the error message "camera failed" when I click on the camera app. Any ideas? Is it a hardware problem? Should I flash a custom rom?
I got that message once, and I panicked. Fortunately, rebooting did it just fine.
Perhaps there is something wrong with the firmware...I searched the net and found this article, maybe useful, IDK.
Thanks for the reply and for the link. Unfortunately I do not understand step 3. When I scroll to "Camera" I do not see a 2nd option which should be named as "user". I just see "camera" and "camcorder". What should I do? Do I have to root the phone?
ok, I have rooted my phone and I have tried the fix described in the link above again. However, I was not successfull. I do not get these options described in the link ("user"). Maybe I am using a wrong version of Pro Launcher. I just downloaded the new version from market...Anyone with a suggestion/idea?
Camera failed
I used to face this problem quite a lot when i was using the stock rom, but after flashing to cow's rom, the problem went away, no more camera failed anymore
Yesterday after upgrade to baseband v. i8150dxlc1 Kernel [email protected]#3 (KIES UPGRADE) i dont have that problem anymore
using micromax a1 past 1 month and this is the only issue i have ..... randomly at times im not able to write data on micro sd card ..... means not able to store clicked pictures , delete/edit content , download content from whatsapp etc , worst part is that it happens without any warning or notification , due to which i lose many pics thinking that i have clicked them but not .... when i open quickpic ( gallery app ) it shows toast notification - "not an error (code 0): could not open the database in read/write mode" , googled the error and found that it is an issue in kitkat , btw im using everything stock ,locked bootloader , non-rooted . i didn't find any proper solution to this.
Any help ?
P.S - problem disappears after a reboot but again comes back after few hours , tried resetting sd card ..... works fine in othe mobile/PC ....
sherrymalhi said:
using micromax a1 past 1 month and this is the only issue i have ..... randomly at times im not able to write data on micro sd card ..... means not able to store clicked pictures , delete/edit content , download content from whatsapp etc , worst part is that it happens without any warning or notification , due to which i lose many pics thinking that i have clicked them but not .... when i open quickpic ( gallery app ) it shows toast notification - "not an error (code 0): could not open the database in read/write mode" , googled the error and found that it is an issue in kitkat , btw im using everything stock ,locked bootloader , non-rooted . i didn't find any proper solution to this.
Any help ?
P.S - problem disappears after a reboot but again comes back after few hours , tried resetting sd card ..... works fine in othe mobile/PC ....
Click to expand...
Click to collapse
tried factory reset ?
habeebrizwan said:
tried factory reset ?
Click to expand...
Click to collapse
yup that too ( i forgot to mention) ...
sherrymalhi said:
yup that too ( i forgot to mention) ...
Click to expand...
Click to collapse
I recommend you to flash it, may be it will fix your problem
habeebrizwan said:
I recommend you to flash it, may be it will fix your problem
Click to expand...
Click to collapse
sorry but i didn't understood .... u mean flash custom rom ? but im waiting for official lollipop update
sherrymalhi said:
sorry but i didn't understood .... u mean flash custom rom ? but im waiting for official lollipop update
Click to expand...
Click to collapse
Nope, said to flash you with stock rom using sp flash tool, lollipop update will be in the last week of January
habeebrizwan said:
Nope, said to flash you with stock rom using sp flash tool, lollipop update will be in the last week of January
Click to expand...
Click to collapse
is bootloader needed to be unlocked to use sp flash tool ?if thats so , then i will wait for cm12 beta 2 , why to go with inferior rom ....
sherrymalhi said:
is bootloader needed to be unlocked to use sp flash tool ?if thats so , then i will wait for cm12 beta 2 , why to go with inferior rom ....
Click to expand...
Click to collapse
I guess you dont need to unlock
habeebrizwan said:
I guess you dont need to unlock
Click to expand...
Click to collapse
ok then ... any link for tutorial? ..... thanks bro for ur efforts
sherrymalhi said:
ok then ... any link for tutorial? ..... thanks bro for ur efforts
Click to expand...
Click to collapse
make sure you have the reuqired drivers installed, just see youtube tutorials, you will get an idea on in this A1 forum, hit thanks if i helped you
I have the exact same problems and i tried using diffrent sd cards but its no use. I know lollipop will fix this issue because google said its bringing back support for sd cards in android 5. Till then i dont know how i can fix this issue. Btw i am on ART runtime . is that causing this problem or will flashing another stock rom work ? Please help.
SD Card Issue
My friend had the same issue with his A1, and I being his "go to guy", I did factory reset, factory reset from recovery mode, installed stock rom again but none of this worked. Finally, i replaced his SD card with mine and tried to click a photo and voila it worked. So morale of the story, buy a new SD card.
Hi all,
My zenfone 2 just got messed up after flashing the echoe kernel.
Rom was fine, but the kernel messed everything up. At first the fast charging went missing and the mtp didnt fucntion, also usb otg cannot be detected.
so started my twrp and wanted to flash stock 160 fw. i keep getting the error below;
E:extractTarfork() process ended with error = 255.
I have tried sideload but again, pc doesnt detect my zenfone 2.
Please help...want to go back to stock rooted.
carnby24 said:
Hi all,
My zenfone 2 just got messed up after flashing the echoe kernel.
Rom was fine, but the kernel messed everything up. At first the fast charging went missing and the mtp didnt fucntion, also usb otg cannot be detected.
so started my twrp and wanted to flash stock 160 fw. i keep getting the error below;
E:extractTarfork() process ended with error = 255.
I have tried sideload but again, pc doesnt detect my zenfone 2.
Please help...want to go back to stock rooted.
Click to expand...
Click to collapse
flash prims barebone via twrp, or else first flash stock recovery and thn adb sideload firmware
and did you reported this at his thread??
say99 said:
flash prims barebone via twrp, or else first flash stock recovery and thn adb sideload firmware
and did you reported this at his thread??
Click to expand...
Click to collapse
yes i did, but i was kicked out of the thread...
trying it now..let me see if your suggestion works...
carnby24 said:
yes i did, but i was kicked out of the thread...
Click to expand...
Click to collapse
weird I didnt see anyone else complaining such things, and yes it will work so relax
Hi, seems the same..i can only restore if i uncheck system from the list of backup options. But fast charge and mtp and otg function all doesnt seem to work.
Sent from my ASUS_Z00AD using Tapatalk
I miss my fast charge and adb function..please help guys..
Sent from my ASUS_Z00AD using Tapatalk
Reflash the latest rom v1.1 , hopefully everything will work fine then
anyone know whats the reason for this??
unmount system before flashinh prism barebone, you wont get error if you unmount system
serhangelgor said:
unmount system before flashinh prism barebone, you wont get error if you unmount system
Click to expand...
Click to collapse
is this the same if i want to flash stock?
carnby24 said:
is this the same if i want to flash stock?
Click to expand...
Click to collapse
didnt tried on stoct, idk
Guys! Is there any chance my problem (http://forum.xda-developers.com/zenfone2/help/asus-zenfone-2-recognized-pc-t3294980) is related with this issue?
Reflashing stock recovery could help? I´m afraid to do it and not be able to recover any thing else or get stuck on boot without usb connection.
Another question: This might be related to kernel? i´m using BitOkObssesion
I am not sure what went wrong on your side. But i flashed the kernel on a phone of a friend and he has no issues at all.
Did you try to download again ? Maybe a bad download..
Sometimes it happens
carnby24 said:
Hi all,
My zenfone 2 just got messed up after flashing the echoe kernel.
Rom was fine, but the kernel messed everything up. At first the fast charging went missing and the mtp didnt fucntion, also usb otg cannot be detected.
so started my twrp and wanted to flash stock 160 fw. i keep getting the error below;
E:extractTarfork() process ended with error = 255.
I have tried sideload but again, pc doesnt detect my zenfone 2.
Please help...want to go back to stock rooted.
Click to expand...
Click to collapse
Every ROM developer or Kernel developer spent a lot of his time on making better experience for user
i personally have my own ROM and i did try Echoe ROM & AEL Kernel because its from Awesome Developer and everyone loves him and he's kind to everyone
many users used his ROMs and Kernels and never experience hardware or software problems because he checks every single detail of his work
all problems that you mentioned cause by Asus and many users sent their devices to service center, so please dont blame anyone about
something they did do and research next time before post something similar
im still using AEL Kernel without any problems
BTW
TWRP backup is broken for our device, Reboot again to recovery and dont select Data or Cache in Restore options
and check this post
Wow..thanks..will try it...thanks..didnt know..cos before this used to select all data and cache..no problem..
carnby24 said:
Wow..thanks..will try it...thanks..didnt know..cos before this used to select all data and cache..no problem..
Click to expand...
Click to collapse
Good luck with it
and for adb and mtp, did you tried other pc ?
or other cable ?
if its the same then its from Asus :crying:
can you please remove "echoe kernel" from thread title and from the thread also ?
But what about the MTP function and fast charing? Doesnt seem to work now.Tried all other PC and cables as well. Still the same.
AL_IRAQI, so you´re saying thats a hardware related issue? i´m asking because i got the same issue but with another rom...
tried different cables different pcs and nothing
carnby24 said:
But what about the MTP function and fast charing? Doesnt seem to work now.Tried all other PC and cables as well. Still the same.
Click to expand...
Click to collapse
Restore Stock and go to Asus service center, Asus messed up these things in latest update
Hello!
I have a problem and would like know if I could fix it in any kind of way. My Mi Max hydrogen was first registered with an Mi account, which has now been deleted. I requested the unlock permission from Xiaomi accidentely with an other MI ID, that's why I have deleted the old one and wanted to register the new one.
First the device was locked after that and I couldn't access my phne anymore, because of an allegedly wrong password.
I managed to unlocked it with the Mi Max account solution flash file which I found in an other forum.
Now I can log in to my phone again with the new account ID, but the problem is, I get an error message on every boot "phone storage damaged". I think the old account information are still registered with the phone, because I can't register the phone to the new account under advance options/develeoper options/MI unlock status. When I click the register account/device button I always get the error message "failed, please try again later".
Because my phone seems to be still registered to that old account, the unlocking tool from xiaomi stucks at 50% completion with the error message current account is different from the account info on the device.
beside that, I now seem to have a problem with my persist mount storage on the phone. I tried to flash a custom ROM with TWRP and there is always a "unable to mount //persist (invaild argument)" error in red displaying. The only way I have found so far to fix this persist error, needs an unlocked bootloader so I think I'm stuck now :/
Flashing official ROMs old and new ones, global and china in EDL mode with Miflash did not fix the problem. I can't install any custom ROM now, since I flashed this Mi account solution thing. This persist error leads to bootloops or never ending loading screen after flashing LineageOS or CM.
does somebody know a way to fix it ?
Thanks in advance
Dave
SOLVED!!
All solved after flashing a modified ROM!! Flash in EDL or Fastboot with MIFlash tool. After that, flash TWRP again and the ROM of your choice.
http://forum.gsmdevelopers.com/showthread.php?t=16030
...
Davehimself said:
All solved after flashing a modified ROM!! Can't post the link to it cause of the min. 10 posts.
Click to expand...
Click to collapse
please send me (pm me) the link of modified ROM , I lose persist partition now, thank you
Yes share link of rom it will help many others
Davehimself said:
All solved after flashing a modified ROM!! Can't post the link to it cause of the min. 10 posts.
Click to expand...
Click to collapse
Can you pm me to because i'm facing similiar problem with my mi max phone..thanks..
Davehimself said:
...
Click to expand...
Click to collapse
please send me that link ,thanks.
www_123 said:
please send me that link ,thanks.
Click to expand...
Click to collapse
Link updated, please check again.
Davehimself said:
Link updated, please check again.
Click to expand...
Click to collapse
thanks.
hi guys. i have a problem with my mi max 3.
i was using the phone normally(google maps on LTE) when it suddenly reboots and bootlooped. since i am on custom rom, i just reflashed the rom but it still is in bootloop. i have tried installing stock rom (global stable latest) and now it does not have cellular network and wifi (bluetooth works fine). i have tried installing china beta rom but still the same thing. whenever i try installing a custom rom, it just goes to bootloop and official roms does not have cellular network and wifi.
imei unknown
wifi mac address is 02:00:00:00:00:00
any solution left for me?
PS: tried flashing using mi flash tool normally in fastboot and did test point also.
has anyone had the same experience?
khuer said:
has anyone had the same experience?
Click to expand...
Click to collapse
You only need to flash a file named modem.fix.ysl.zip to restart modem it's mostly caused by a data lose which cause a sys crash.
I'm on phone now but you'll find this file on telegram groups. Just ask for it.
Or search for it on my channel @Nitrogencloud
You'll maybe need to reflash miui with miflash if it's not enough.
Regards
Sent from my MI MAX 3 using XDA Labs
Skyllery said:
You only need to flash a file named modem.fix.ysl.zip to restart modem it's mostly caused by a data lose which cause a sys crash.
I'm on phone now but you'll find this file on telegram groups. Just ask for it.
Or search for it on my channel @Nitrogencloud
You'll maybe need to reflash miui with miflash if it's not enough.
Regards
Sent from my MI MAX 3 using XDA Labs
Click to expand...
Click to collapse
hi! thank you very much for your response. i was able to join your channel and download the modem.fix.ysl.zip. let me just clarify the steps.
1. flash modem.fix.ysl.zip via twrp
2. reboot phone or do i need clear cache/dalvik?
3. if not resolved, reflash miui (should it be latest global stable?)
4. flash modem.fix.ysl.zip again after flashing miui?
Have you guys found a solution? I have the exactly same problem on Mi Max 3 4/64Gb version. I'm on MIUI Global Stable 10.3.5.0. It was on China stable and had issues,so i flashed Global Stable fastboot rom using Mi Flash Tool(flash all option),and It doesn't solve the problem.I have unlocked bootloader,and no previous system backup.
Also i tried flashing NON-HLOS.bin file from Global Stable fastboot ROM using command : fastboot flash modem NON-HLOS.bin
Also i tried something that worked on my old redmi 4,after NON-HLOS.bin flash,executed fastboot commands :
fastboot erase modemst1 and modemst2,but no luck because of "partition is write protected" error.
Have you found what's the cause of this problem?Is it hardware?Is it corrupted modem files?Please, any help,any suggestion will be appreciated. I'll try everything to fix it. Thank you in advance.
---------- Post added at 05:32 PM ---------- Previous post was at 05:26 PM ----------
Also,can someone upload modem.fix.ysl.zip to Google drive or something? I can't seem to find it anywhere.Thank you
ghost baby said:
[/COLOR]Also,can someone upload modem.fix.ysl.zip to Google drive or something? I can't seem to find it anywhere.Thank you
Click to expand...
Click to collapse
I also tried the modem.fix.ysl.zip. No success for me.
DoYouWantFriesWithThat said:
I also tried the modem.fix.ysl.zip. No success for me.
Click to expand...
Click to collapse
Thanks for the info,i think that now there's not much we can do.I erased modemst1 and modemst2 from OrangeFox recovery and it didn't work.Also , I noticed that modemst1 and modemst2 are created automatically on boot.I also tried latest China Stable (MIUI 11) and no luck.I reached out xiaomi support via email explaining them the problem,and my tries to fix it,so if they respond you'll be the first to know,so we can hopefully fix our phones.The only thing i think i haven't tried is flash QCN file for "nitrogen" that i found on Google (and before that i need to edit that file and put my original IMEI,to avoid changing it).
And another thing i haven't tried is EDL flash.Maybe that will fix something,and I'll let you know how it goes.
Thank you for your help.
Hi guys, I am on the exact same situation. I couldn't get any EDL backup to flash on my device. Did you have any luck solving the problem?
@diegoocampo I'm in contact with a few people who had this problem (and others related). The many attempts to fixing yielded no results. Apparently EDL is the only thing left to try.