Could some one extract and prove me the stock file for the sterio mod from 4.5.8.
Thanks
Here you go. All mixer_paths_***.xml from 4.5.8
Related
Hello! I've ported HTC functionality which allows us to use .mp3 files as a volume level adjust sounds instead of simple "beep". Sounds are located in /media/audio/ui directory. Stock HTC ones are low quality, if you find better ones please post them here.
CWM recovery package contains framework.jar from stock deodexed JVO firmware and should be used only with it! If you want to make a backup, simply pull currently used framework.jar from your system and swap it with the one in my package.
Lukiqq said:
Hello! I've ported HTC functionality which allows us to use .mp3 files as a volume level adjust sounds instead of simple "beep". Sounds are located in /media/audio/ui directory. Stock HTC ones are low quality, if you find better ones please post them here.
CWM recovery package contains framework.jar from stock deodexed JVO firmware and should be used only with it! If you want to make a backup, simply pull currently used framework.jar from your system and swap it with the one in my package.
Click to expand...
Click to collapse
how do I set my volume sound ?
DAGr8 said:
how do I set my volume sound ?
Click to expand...
Click to collapse
Simply replace sound files Volume-1.mp3...Volume-7.mp3 which are located in /system/media/audio/ui directory with your own sounds.
Lukiqq said:
Hello! I've ported HTC functionality which allows us to use .mp3 files as a volume level adjust sounds instead of simple "beep". Sounds are located in /media/audio/ui directory. Stock HTC ones are low quality, if you find better ones please post them here.
CWM recovery package contains framework.jar from stock deodexed JVO firmware and should be used only with it! If you want to make a backup, simply pull currently used framework.jar from your system and swap it with the one in my package.
Click to expand...
Click to collapse
Hello Lukiqq!
I've a GalaxyS2 and I am interested by your great mod! it's possible to port your mod on a GalaxyS2 rom?
I've attached this framework.jar.
Thanks by advance!
edit: framework-res.apk added!
XWKE7VilllainROM1.1_frameworks.zip
Can you add it to the JVP version?
can you make it work on JVP ?
can you just maybe release the source for the modification? i mean what to change in this jar
picard666 said:
can you just maybe release the source for the modification? i mean what to change in this jar
Click to expand...
Click to collapse
It would be not a bad thing!
Thanks by advance!
ZeuBug said:
It would be not a bad thing!
Thanks by advance!
Click to expand...
Click to collapse
Yeah i hope he release the code and i can do it my self
I don't found in the forum some problems.
I have a HTC One V (GSM)
Stock android 4.0.3, ics sense 4.0
build number: 2.22.401.6
Kernel: 3.0.46-TiTaNiuM-V6
rooted, with recovery and busybox.
BUT odex rom.... no deodexed...
I need the deodexed files/rom (dir framework + dir app)
i dont found..
or
i need the full beats enhancer mod (htc fx) for odex version..
and
i need advanced power menu (with bootloader and recovery) for my rom (odex version)...
I found beats control and the apm for DEODEXED rom. But i haven't this rom, just the odex rom....
And i have a Lock Ring pic, but this is a png.
In this rom has a jpg pic. 2 pics in the stock version, lockscreen_ring.jpg and lockscreen_ring_high.jpg
With Virtuous Tens Studio i made 2 similar lock rings png, and replaced the stock rings..with find and replace from menu in the VTS. After build the project, and replace the apk my one v was boot loop....
i attached the original file, and the made by me.
Anyone can help me?
Gyuri111 said:
And i have a Lock Ring pic, but this is a png.
In this rom has a jpg pic. 2 pics in the stock version, lockscreen_ring.jpg and lockscreen_ring_high.jpg
With Virtuous Tens Studio i made 2 similar lock rings png, and replaced the stock rings..with find and replace from menu in the VTS. After build the project, and replace the apk my one v was boot loop....
i attached the original file, and the made by me.
Anyone can help me?
Click to expand...
Click to collapse
when you decompiled Htclockscreenlite.apk, what png did you replace with your custom one? I decompiled it and I would assume you should customize the png named "lockscreen_ring" then compile the apk then....
- open the original apk with 7zip or similar
- open the newly compiled apk with custom lock ring with 7zip or similar
- copy the folder "res" and "resources.arsc" from custom apk and paste them into the original apk, overwriting the files
- then place the original apk with replaced files into your rom, or make flashable zip
Hope it helps! :fingers-crossed:
a7thousandths said:
when you decompiled Htclockscreenlite.apk, what png did you replace with your custom one? I decompiled it and I would assume you should customize the png named "lockscreen_ring" then compile the apk then....
- open the original apk with 7zip or similar
- open the newly compiled apk with custom lock ring with 7zip or similar
- copy the folder "res" and "resources.arsc" from custom apk and paste them into the original apk, overwriting the files
- then place the original apk with replaced files into your rom, or make flashable zip
Hope it helps! :fingers-crossed:
Click to expand...
Click to collapse
Okay, i try it now.
I deodexed my rom with Kitchen, very very good.
But i was a problem.. I didn't install an app, because: No have enough space... I solved this problem with Lucky Patcher. I deleted the odex backups.
I made a backup from my rom.
i installed The Beats Enhancer Mod V2.22.. Very good. I haven't boot loop.
But the APM V1.56 not correct for me, with this boot loop my mobile.
Your version end of boot loop...
I made new apk from stock version with my lockring png.. after i open the stock apk in 7zip and open the modded apk in 7zip.
I replaced and overwrited "res" and "resources.arsc" in the original apk.
I copied to /system/app overwrited the old file...
Gyuri111 said:
Your version end of boot loop...
I made new apk from stock version with my lockring png.. after i open the stock apk in 7zip and open the modded apk in 7zip.
I replaced and overwrited "res" and "resources.arsc" in the original apk.
I copied to /system/app overwrited the old file...
Click to expand...
Click to collapse
could you upload your original HtcLockScreenLite.apk so that i can take a look at it? I made it work on my rom which is Ignorance V5...same android version and all. The only thing is that the ring only appeared when I selected the original HTC skin.
a7thousandths said:
could you upload your original HtcLockScreenLite.apk so that i can take a look at it? I made it work on my rom which is Ignorance V5...same android version and all. The only thing is that the ring only appeared when I selected the original HTC skin.
Click to expand...
Click to collapse
i attached the original lock screen ring apk. download it!
My one v deodexed by me.
done! select original HTC skin to see it
Can we not do the sound mode to the default_gain.conf file in the system\etc folder? It doesn't seem to have a default_gain.conf file in that location. Just seeing if anyone has tried and if there is a different file location or a different file name?
Does anyone know if this will work with our note 4 model N910P? Audio mod for note 4
EDIT: Ok can some one just tell me if they can see the default_gain file in the location system/etc please and thank you! I am on lollipop stock rooted.
I Already tried the Chemo Z2 Stereo mod, it increases the volume, but it disables the whole Loudspeaker sound.
The Z1 4.4.4 headphone and speaker boost works pretty well but without stereo support
It would be even nice to upload the Stock Soundfiles of Z1c LP
Thanks a lot!
WieserZ1C said:
I Already tried the Chemo Z2 Stereo mod, it increases the volume, but it disables the whole Loudspeaker sound.
The Z1 4.4.4 headphone and speaker boost works pretty well but without stereo support
It would be even nice to upload the Stock Soundfiles of Z1c LP
Thanks a lot!
Click to expand...
Click to collapse
download the .rar file
extract it, you will get two xml files (original and modified by myself)
if you want the original, rename it to mixer_paths.xml, copy it to /system/etc and set permission to rw-r-r
if you want a louder one, rename the second to mixer_paths.xml too, copy it to /system/etc and set perm to rw-r-r
moonryder said:
download the .rar file
extract it, you will get two xml files (original and modified by myself)
if you want the original, rename it to mixer_paths.xml, copy it to /system/etc and set permission to rw-r-r
if you want a louder one, rename the second to mixer_paths.xml too, copy it to /system/etc and set perm to rw-r-r
Click to expand...
Click to collapse
Actually im looking for the stereo mod but it doesnt seem to work right now
WieserZ1C said:
Actually im looking for the stereo mod but it doesnt seem to work right now
Click to expand...
Click to collapse
This one is working for me. I didn't flash the zip file, just extracted the mixer_paths.xml and put it in the /ect folder with rw,r,r permissions.
Be sure to follow the instructions from the post closely else it wont work.
http://forum.xda-developers.com/xperia-z1/themes-apps/z-series-z3stereo-mod-t3086374/post60278492
What's a stereo MOD supposed to do when used for a device with a single speaker like the Z1 Compact?
Not sent by me.
BlackArtsInc said:
What's a stereo MOD supposed to do when used for a device with a single speaker like the Z1 Compact?
Not sent by me.
Click to expand...
Click to collapse
Your earpiece speaker will be used as secondary speaker. Of course its not quite as loud as the bottom speaker but its noticeable.
I've installed Viper Audio.
Sent from my D5503 using XDA Free mobile app
Guys does this also works with .270 LP version???
This mod http://forum.xda-developers.com/crossdevice-dev/sony/mod-dolby-digital-beat-sound-mod-t3117618
An this one http://forum.xda-developers.com/android/apps-games/mod-dolby-atmos-t3109446 are working very good
Hi
Could someone share his stock OOS bootanimation.zip file?
Thanks