Related
please help
I download cm 10.1 alpha 8 and i tried to flash it
when i install the file cm 10.1 from CWM recovery tell me :
Installing Update ....
Set_perm : some changes failed
E : Error in /emmc/CM 10.1/Cm-10.1-20130813-Experimental - ancora - alpha 8.zip
( Status 7 )
Installing aborted
what can i do ???
dr_amjad said:
please help
I download cm 10.1 alpha 8 and i tried to flash it
when i install the file cm 10.1 from CWM recovery tell me :
Installing Update ....
Set_perm : some changes failed
E : Error in /emmc/CM 10.1/Cm-10.1-20130813-Experimental - ancora - alpha 8.zip
( Status 7 )
Installing aborted
what can i do ???
Click to expand...
Click to collapse
Its a bad download. Download the file again.
Sent from my bomb cuz YOLO right?
iDelta said:
Its a bad download. Download the file again.
Sent from my bomb cuz YOLO right?
Click to expand...
Click to collapse
if i redownload the rom , how i will put the rom in external sd card ??
my phone is do nothing except opening cwm recovery !
agree with @iDelta
download again, and be sure not corup.
vpart_aeip said:
agree with @iDelta
download again, and be sure not corup.
Click to expand...
Click to collapse
if i redownload the rom , how i will put the rom in external sd card ??
my phone is do nothing except opening cwm recovery !
dr_amjad said:
if i redownload the rom , how i will put the rom in external sd card ??
my phone is do nothing except opening cwm recovery !
Click to expand...
Click to collapse
You can take the ext-sd from your phone .... then plug into your pc or laptop???
vpart_aeip said:
You can take the ext-sd from your phone .... then plug into your pc or laptop???
Click to expand...
Click to collapse
I am redownloading the ROM now
but can i return to gingerbread 2.3.6 in the case that my phone is now ??
can i return to gingerbread although the phone in CWM recovery ??
dr_amjad said:
I am redownloading the ROM now
but can i return to gingerbread 2.3.6 in the case that my phone is now ??
can i return to gingerbread although the phone in CWM recovery ??
Click to expand...
Click to collapse
yeah ... flash with odin, if you want to go back to gb :good:
http://forum.xda-developers.com/showthread.php?t=1654643
vpart_aeip said:
yeah ... flash with odin, if you want to go back to gb :good:
http://forum.xda-developers.com/showthread.php?t=1654643
Click to expand...
Click to collapse
Can u still online untill the download finish ?
It's just 35 min
dr_amjad said:
Can u still online untill the download finish ?
It's just 35 min
Click to expand...
Click to collapse
yeah ... but I do not promise, I'm sleepy
vpart_aeip said:
yeah ... but I do not promise, I'm sleepy
Click to expand...
Click to collapse
can you advise me to a good ROM jellybean to download it and flash it ??
THe Rom you use in your phone
dr_amjad said:
can you advise me to a good ROM jellybean to download it and flash it ??
THe Rom you use in your phone
Click to expand...
Click to collapse
i'm use this rom http://forum.xda-developers.com/showthread.php?t=2396041
you can try it or cm10.1 sir arco,etc
vpart_aeip said:
i'm use this rom http://forum.xda-developers.com/showthread.php?t=2396041
you can try it or cm10.1 sir arco,etc
Click to expand...
Click to collapse
Thank you very much dear
now i flashed my phone to CM 10.1 alpha 8
and it seems to be good ROM
Now if i want to flash my phone to your ROM
i must to return to gingerbread first ??? or i can flash my phone from CM 10.1 to your ROM directly ???
dr_amjad said:
Thank you very much dear
now i flashed my phone to CM 10.1 alpha 8
and it seems to be good ROM
Now if i want to flash my phone to your ROM
i must to return to gingerbread first ??? or i can flash my phone from CM 10.1 to your ROM directly ???
Click to expand...
Click to collapse
if you want to flash new ROM, you don't have to go back to GB.
just flash it like you flashed your current ROM before through CWM Recovery
BUT, we are recommend you to make nandroid backup, and do pristine before you changing or flash new ROM
temenalie said:
if you want to flash new ROM, you don't have to go back to GB.
just flash it like you flashed your current ROM before through CWM Recovery
BUT, we are recommend you to make nandroid backup, and do pristine before you changing or flash new ROM
Click to expand...
Click to collapse
Thank you for your reply
but sorry i am still beginner in flashing samsung galaxy W i8150
so i don't understand WHAT IS NANDROID AND WHAT IS PRISTINE ???
dr_amjad said:
Thank you for your reply
but sorry i am still beginner in flashing samsung galaxy W i8150
so i don't understand WHAT IS NANDROID AND WHAT IS PRISTINE ???
Click to expand...
Click to collapse
Before you flash new rom, I suggest to backup your current rom,
you can do it through recovery mode, under backup and restore, and select backup to external sd card
that's it what we called nandroid backup.
The function is when your new rom installed, BUT you don't like it, so you just restore the backup,
your previous rom will back along with all your settings, data, etc.
And how to do pristine?
please refer to this thread http://forum.xda-developers.com/showthread.php?t=2044861
Hy
i have got myself a new mini (coming from htc) and have some questions.
first what i did already:
rooted the phone (works after flashing update for superSU)
did a nandroid backup
flashed custom rom CM10
flashed gapps
now after doing this, i came to conclusion i needed the original dropbox for getting the free storage (didn't work @cm). i wanted to get this using android manager and now the problems starts:
nandroid manager need other superuser, so i installed superSU again and flashed the update. but now i haven't got root anmore
in recovery a did a restore from my backup => the phone bootes, but give me a lot of errors and freezes a little (gapps, google services,...)
whent back to racovery and flashed again CM10 and gapps => everything works
but now i am back at the beginning and some more questions:
how can i install other superuser in CM10 without problems
why crashes my backup
what can i do if i restore (maybe flash gapps?)
did it also with titanium backup pro but gives error for other bussybox. after installing new one, still not ok
manny thanks in advance
Nobody ??
Please help
_nicolas_ said:
Nobody ??
Please help
Click to expand...
Click to collapse
If you have l9195 follow this and should be able to root and everything http://forum.xda-developers.com/showthread.php?t=2364980
TB works ok...restoring and everything else
dr_jerremy said:
If you have l9195 follow this and should be able to root and everything http://forum.xda-developers.com/showthread.php?t=2364980
TB works ok...restoring and everything else
Click to expand...
Click to collapse
I know. I followed this tutorial. Root wast my probleem
_nicolas_ said:
I know. I followed this tutorial. Root wast my probleem
Click to expand...
Click to collapse
hi,
I have the same problem with stock Rom.
When restoring gapps stope working and the solution is factory reset.
I tried also PhilZ recovery - same result.
I'm still searching a solution.
Next i will try TWRP recovery and i will let you know...
mbgheban said:
hi,
I have the same problem with stock Rom.
When restoring gapps stope working and the solution is factory reset.
I tried also PhilZ recovery e result.
I'm still searching a solution.
Next i will try TWRP recovery and i will let you know...
Click to expand...
Click to collapse
Same here . if factory reset the apps from the play store can't write in data partition . flash arco68 kernel before cwm backup then backup and everything is ok .the problem is the stock kernel(security settings).
yannis11 said:
Same here . if factory reset the apps from the play store can't write in data partition . flash arco68 kernel before cwm backup then backup and everything is ok .the problem is the stock kernel(security settings).
Click to expand...
Click to collapse
I installed TWRP from here and it works fine.
mbgheban said:
I installed TWRP from here and it works fine.
Click to expand...
Click to collapse
i confirm that just flash TWRP backup then restoring and works for me too.the only reason i dont try this recovery is because touch interfase but i manage.so is a bug from cwm or something we doing wrong
Hi,
I have searched for an answer but could not find anything as a solution.
My home button works on neither viper nor leedroid; it simply does not respond. Is there a known solution? I reflashing does not work either.
If you are on the N versions of either of those roms it depends on what Firmware you have installed. If you are on M Firmware you need to install the fix for Viper from the hub, unless they changed that on the newest version. As for Lee's rom during the aroma installer it will ask which Firmware you are on and it should work from there if you select the correct setting.
lightweaponx said:
If you are on the N versions of either of those roms it depends on what Firmware you have installed. If you are on M Firmware you need to install the fix for Viper from the hub, unless they changed that on the newest version. As for Lee's rom during the aroma installer it will ask which Firmware you are on and it should work from there if you select the correct setting.
Click to expand...
Click to collapse
Thank you for the reply! I installed leedroid with the N based firmware. Can you tell me how to proceed without losing my apps and data?
RootMaster2016 said:
Thank you for the reply! I installed leedroid with the N based firmware. Can you tell me how to proceed without losing my apps and data?
Click to expand...
Click to collapse
You could use a tool like Titanium Backup and make sure it is on your SD card or move it over to a PC after the backup. You could also try a dirty flash depending on what ROM you are on right now.
lightweaponx said:
You could use a tool like Titanium Backup and make sure it is on your SD card or move it over to a PC after the backup. You could also try a dirty flash depending on what ROM you are on right now.
Click to expand...
Click to collapse
OK I'm on leedroid beta 2 right now. So basically reflash with no wipe?
RootMaster2016 said:
OK I'm on leedroid beta 2 right now. So basically reflash with no wipe?
Click to expand...
Click to collapse
That should do the trick but it would still be wise to have some sort of backup somewhere.
lightweaponx said:
That should do the trick but it would still be wise to have some sort of backup somewhere.
Click to expand...
Click to collapse
Ah of course forgot to mention that. Should I select anything special in the options menu during installation? Thanks
lightweaponx said:
That should do the trick but it would still be wise to have some sort of backup somewhere.
Click to expand...
Click to collapse
Dirty flash did not work
At that point it sounds like you might need to do a full wipe. There should be some good instructions in that thread.
when it asks you for the firmware you are using during the installer, you need to choose the old one...else your fingerprint is broken.
You are obviously choosing the wrong option during installtion.
Mod Edit
Important note: if you going to report a bug plz give the logs also so reporting it actually will done something
Also:
this rom got no bug
Microsd/Sim2 tray Mod?
Hi luiscool,
Thanks for the ROM mate, but can I ask what you did to ensure that Snapchat antiban?
Kind regards,
Nathan
Hello. Thanks, I'm testing it now.
Luiscool Rom
Nolan01 said:
Hello. Thanks, I'm testing it now.
Click to expand...
Click to collapse
Any telegram group for this rom?
baruaberger said:
Any telegram group for this rom?
Click to expand...
Click to collapse
I don't think so. But it would be good.
how to use the prepatched twrp??
I've found two bugs so far. First, you cannot get a backup from Samsung Cloud and second, Magisk Manager won't open just crashes. I have reinstalled both the rom and TWRP to make sure that it wasn't a one off thing.
lambik333 said:
how to use the prepatched twrp??
Click to expand...
Click to collapse
Flash in Odin in the ap slot. If you're using TWRP .7 or .8 already you don't need to use it though.
Regards,
Nathan
Rennert said:
Microsd/Sim2 tray Mod?
Click to expand...
Click to collapse
Please test if it works or not else i add it in the next update
sevsman said:
Hi luiscool,
Thanks for the ROM mate, but can I ask what you did to ensure that Snapchat antiban?
Kind regards,
Nathan
Click to expand...
Click to collapse
I have done a system modification if you want to apply this to another ROM then you can pm me for the fix as i prefer leaving this thread to normal user / ROM feedback not fixes.
Nolan01 said:
Hello. Thanks, I'm testing it now.
Click to expand...
Click to collapse
good luck
lambik333 said:
how to use the prepatched twrp??
Click to expand...
Click to collapse
Do as sevsman said, flash it in ODIN and then flash my ROM
tripping_ said:
I've found two bugs so far. First, you cannot get a backup from Samsung Cloud and second, Magisk Manager won't open just crashes. I have reinstalled both the rom and TWRP to make sure that it wasn't a one off thing.
Click to expand...
Click to collapse
The Magisk thing is a bug because magisk.apk is not included in the ROM, just install latest Magisk.apk and it works and for Samsung Cloud you must sign in first before you can use it as always. although i did not test it so please give logs if it continues to not work so i can fix it
Thanks
thank u
Flashed the Rom. Everything seem to work fine but couldn't get backup from Samsung Cloud as reported earlier by another member. Please fix it.
Thanks
Very nice. downloading. :fingers-crossed::fingers-crossed::fingers-crossed:
Magisk always freeze and not working or I am doing something wrong.
ok next version no more samsung cloud bug i will check it out
"100% camera quality" - can you prove it?
I have flashed the rom, everything works except that Magisk Manager says Magisk is not installed. What did i do wrong and how can i fix this?
Tok12 said:
I have flashed the rom, everything works except that Magisk Manager says Magisk is not installed. What did i do wrong and how can i fix this?
Click to expand...
Click to collapse
You need to select reboot to recovery after flashing the ROM.
sevsman said:
You need to select reboot to recovery after flashing the ROM.
Click to expand...
Click to collapse
I just did a complete wipe, reflashed the rom,held the combination to reboot in recovery. Once in recovery i booted into the system. Still no Magisk?
Tok12 said:
I just did a complete wipe, reflashed the rom,held the combination to reboot in recovery. Once in recovery i booted into the system. Still no Magisk?
Click to expand...
Click to collapse
In recovery you're meant to use reboot/recovery and not system.
Hello guys!
Recently the sensor (auto rotate screen, gyro, etc) of my phone stopped working after installed Dot OS 5.1.2 (android 11) , and i didn't liked at all, so i've wiped dalvic, system,cache,internal storage, etc - (default method that everyone does)
and i've installed Corvus OS 9.0 (android 10) again that was the current OS that i'm using right now.
i've downloaded the sensor check that i found in google play, and seems like it's not installed in my device or corrupted, and i don't know what to do.
Could anyone can solve this? use apps to rotate the screen is so boring
Barring a hardware problem, reverting to stock ROM with MiFlash should fix that; if it does, you can then start over with your prefered custom ROM.
pnin said:
Barring a hardware problem, reverting to stock ROM with MiFlash should fix that; if it does, you can then start over with your prefered custom ROM.
Click to expand...
Click to collapse
Alright, i'm gonna try it, this afternoon, thanks so much for help! i will reply later for a new feedback!
It didnt work, i flashed the stockrom using miflash, but It seems like dont has any sensor installed.
VictorBravi said:
It didnt work, i flashed the stockrom using miflash, but It seems like dont has any sensor installed.
Click to expand...
Click to collapse
try flashing persit img ginkgo by recovery,if you don't know how to find this file, just extract the latest fastboot rom stock and it will have persist.img inside the images folder
dalzin said:
try flashing persit img ginkgo by recovery,if you don't know how to find this file, just extract the latest fastboot rom stock and it will have persist.img inside the images folder
Click to expand...
Click to collapse
alright, i guess i'm gonna try this tomorrow (because i've flashed the stock rom, and i forgot to check the box "clean all" instead "clean and block", so i've blocked my bootloader and i have to wait till tomorrow to unblock again and try this method. thanks anyway!
VictorBravi said:
alright, i guess i'm gonna try this tomorrow (because i've flashed the stock rom, and i forgot to check the box "clean all" instead "clean and block", so i've blocked my bootloader and i have to wait till tomorrow to unblock again and try this method. thanks anyway!
Click to expand...
Click to collapse
this might brick your phone !
look for more info before proceeding ...
loopypalm said:
this might brick your phone !
look for more info before proceeding ...
Click to expand...
Click to collapse
yeah, i've bricked my phone before and now i know how to solve that watching youtube videos, thanks for the tip
anyways, i did it, custom rom installed successfully.
now , in this afternoon i'm gonna try to flash the "persist.img" because i'm working now
i'm gonna post the feedback soon
got it guys, thanks so much for the help of you all! it's working everything now! you're the best
VictorBravi said:
got it guys, thanks so much for the help of you all! it's working everything now! you're the best
Click to expand...
Click to collapse
persist , right ?
loopypalm said:
persist , right ?
Click to expand...
Click to collapse
Yeah, it was it! maybe because when i was flashing another rom, in the twrp there was a box to check "persist" and i've checked because i didn't know what was it, so, because of it when i flashed a new rom, the auto rotate isn't working because it wasn't installed. now i can rotate my screen without use secondary apps \o/ thanks a bunch!