Hello, i have bricked my phone after an hurupdate, i dont know why but the phone have suddenly turn off during twrp hurupdater process and now i can't turn on the phone, i can plug in my pc & he recognize him as "fastboot devices" but when i try to flash something or unbrick via multi tool nothing happen (FAILED (remote: Command not allowed))
I can't do anything now.. Please help me !
Albanheraibi said:
Hello, i have bricked my phone after an hurupdate, i dont know why but the phone have suddenly turn off during twrp hurupdater process and now i can't turn on the phone, i can plug in my pc & he recognize him as "fastboot devices" but when i try to flash something or unbrick via multi tool nothing happen (FAILED (remote: Command not allowed))
I can't do anything now.. Please help me !
Click to expand...
Click to collapse
Erecovery has started working for some people. you can try that
mrmazak said:
Erecovery has started working for some people. you can try that
Click to expand...
Click to collapse
Nope .. nothing work ..
Anyone know how to unbrick ? ..
I think i have flashed the wrong update, i have bndl21 & i have flashed the bndl22 or bndal10, my phone is dead ?
Albanheraibi said:
I think i have flashed the wrong update, i have bndl21 & i have flashed the bndl22 or bndal10, my phone is dead ?
Click to expand...
Click to collapse
Shouldn't be, at least not from that, not completely.
Was this the first condition, or an added problem?
I think best thing to try is the service ROM.
This one is BND-L21C432..
Service rom BND-L21C432
https://www.androidfilehost.com/?fid=11050483647474828964
1. Unzip download
2. copy the dload folder to root of sdcard
3. power on phone holding all three buttons
4. After phone finishes and reboots, unlock frp and bootloader, if needed
5. Use Huru or HWOTA to flash correct firmware for your model/ region.. If this is not the correct version for your honor 7x
Now with dc phoenix i have restore the fastboot and the erecovery, i can flash all i want but nothing happens, just boot loop at "your phone is not trusted" screen.
I was on catuva's rom before brick and now i have the catuva splashboot screen even after full firmware retore by dc phoenix.
When i try to flash in twrp i see lot of errors related to partition table (invalid argument cust, odm, sytsem etc) it seems the partition table have a problem..
The DLOAD can restore this ?
When i try to restore via dload it stuck at 5% and it says "software install failed!" ..
Someone Help me ?..
Albanheraibi said:
When i try to restore via dload it stuck at 5% and it says "software install failed!" ..
Someone Help me ?..
Click to expand...
Click to collapse
You got failed using the "service-rom" dload?
This one is Oreo I believe. There is a nougat one also.
mrmazak said:
You got failed using the "service-rom" dload?
This one is Oreo I believe. There is a nougat one also.
Click to expand...
Click to collapse
Yes stuck at 5%..
i have try to flash the Honor 7X-Elemental V1(8.X-GPU) and i get an error at the end of process >
mount: failed to mount
/dev/block/platform/hi_mci.0/by-name/system at /system: invalid argument
What i am supposed to do with this error ?
Albanheraibi said:
Yes stuck at 5%..
i have try to flash the Honor 7X-Elemental V1(8.X-GPU) and i get an error at the end of process >
mount: failed to mount
/dev/block/platform/hi_mci.0/by-name/system at /system: invalid argument
What i am supposed to do with this error ?
Click to expand...
Click to collapse
Says in the install guide for it, you must be running at newest security patch in order to install elemental.
Please focus on one thing. Getting phone to boot full stock first before trying other rom. You are going to hard brck your phon if you keep doing flashes when the stock fails to install
mrmazak said:
Says in the install guide for it, you must be running at newest security patch in order to install elemental.
Please focus on one thing. Getting phone to boot full stock first before trying other rom. You are going to hard brck your phon if you keep doing flashes when the stock fails to install
Click to expand...
Click to collapse
When i try to rollback emui5 via twrp with your guide i have this error :
write radio image...
check_write_data_to_partition,write data error update_huawei_pkg_from_ota_zip: update pakage from zip failed
E : unknown command [errno]
Updater process ended with ERROR : 9
Error installing zip file '/external_sd/HWOTA8/update.zip'
i remember that the phone has started to bootloop just after twrp flashed the wrong radio file..
This is the end ?
Albanheraibi said:
When i try to rollback emui5 via twrp with your guide i have this error :
write radio image...
check_write_data_to_partition,write data error update_huawei_pkg_from_ota_zip: update pakage from zip failed
E : unknown command [errno]
Updater process ended with ERROR : 9
Error installing zip file '/external_sd/HWOTA8/update.zip'
i remember that the phone has started to bootloop just after twrp flashed the wrong radio file..
This is the end ?
Click to expand...
Click to collapse
I am not understanding how you say you follow my guide, then post the error.
This error shows you are trying to install ota update with TWRP.
My guide sets you to install ota update file with a modified stock recovery (no-check).
If you are having trouble because of bad translation, please do not assume what you need to do and wait for proper help and translation
mrmazak said:
I am not understanding how you say you follow my guide, then post the error.
This error shows you are trying to install ota update with TWRP.
My guide sets you to install ota update file with a modified stock recovery (no-check).
If you are having trouble because of bad translation, please do not assume what you need to do and wait for proper help and translation
Click to expand...
Click to collapse
Ok after update with hurupdater via twrp (he flashed the correct radio.img file) the phone have income from death !
Thank you for trying to help me !
WARNINGS:
Keep your backup files safe and secure ! If you can, encrypt them.
If you try to flash in "firmware upgrade" mode, bootloader will be LOCKED again !
Never try to flash in "format all" mode ! Otherwise, you will LOSE all secure and identifying infos for your device. Like IMEI and MAC.
Never try to share your backups or your security and privacy will be compromised.
USE AT YOUR OWN RISK. I AM NOT RESPONSIBLE FOR YOUR ACTIONS.
Did you have any other error not mentioned here ?
Just attach the screenshot of the error and explain some what you did to get this error and we will try to help.
Good luck !
Error: "LIB DA not match"
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If you are facing this issue, you have three solutions for that error:#1. Try on Linux.#2. Download an older version of the SP Flash Tool. See "Alternative Downloads" in this guide: https://forum.xda-developers.com/t/...for-merlin-redmi-note-9-redmi-10x-4g.4229937/#3. Uncheck "LIB DA match" in the Options. Check step #10 of this guide: https://forum.xda-developers.com/t/...for-merlin-redmi-note-9-redmi-10x-4g.4229937/
Error: "PMT changed for the ROM"
Firstly, NEVER try to flash in "format all" mode !Otherwise, you will LOSE all secure and identifying infos for your device. Like IMEI and MAC.If you are facing "PMT changed" message, your device has an older scatter file inside it.This is because there is any modification to the scatter file you are using to the scatter file used before.There are some minor changes from scatter file of the MIUI 11 to the scatter file of MIUI 12, but nothing significant. You can ignore it.You have two solutions for that error:#1. Use the same scatter file present on the device.#2. Flash using "firmware upgrade" mode and a new PMT will be written.But, if you flash using "firmware upgrade" mode, bootloader will be LOCKED again and userdata will be ERASED.If you want, you can backup the state of unlocked bootloader BEFORE the "firmware upgrade" and then restore it after.Just follow this guide before the "firmware upgrade": https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4220013/
Error: "STATUS_BROM_CMD_STARTCMD_FAIL"
Just simple try to boot/reboot your device.Once is enough.It will refresh the download/EDL mode.
Error: "STATUS_SEC_AUTH_FILE_NEEDED"
If you are facing this error, you are trying to flash using EDL mode.Firstly, try to flash in download mode and not in EDL mode.Just connect the powered off device without press any key.If you want to flash in EDL mode, you need to bypass authentication.Just follow this guide: https://forum.xda-developers.com/t/...d-flash-in-edl-with-no-auth-for-free.4229679/
Error: "STATUS_BROM_CMD_FAIL"
If you are facing this error, you are trying to flash using EDL mode.Firstly, try to flash in download mode and not in EDL mode.Just connect the powered off device without press any key.If you want to flash in EDL mode, you need to bypass authentication.Just follow this guide: https://forum.xda-developers.com/t/...d-flash-in-edl-with-no-auth-for-free.4229679/
Error: "STATUS_BROM_CMD_SEND_DA_FAIL"
Just use the properly DA (Download-agent) file for MERLIN devices.Here you can find DA files for MERLIN: https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4209765/
Error: "STATUS_EXT_RAM_EXCEPTION"
Firstly, NEVER try to flash in "format all" mode !Otherwise, you will LOSE all secure and identifying infos for your device. Like IMEI and MAC.If you are facing "EXT RAM Exception" message, probably your device is DEAD or uncompatible with ROM variant.Just Flash using the "FIRMWARE UPGRADE" mode and your device will be alive again.If you flash using "firmware upgrade" mode, bootloader will be LOCKED again and userdata will be ERASED.If you want, you can backup the state of unlocked bootloader BEFORE the "firmware upgrade" and then restore it after.Just follow this guide before the "firmware upgrade": https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4220013/
Do you need help with your MERLIN device ?
Read this FAQ: https://forum.xda-developers.com/t/...for-merlin-redmi-note-9-redmi-10x-4g.4225163/
Hi @VD171
I've tried u'r method for Error: "STATUS_EXT_RAM_EXCEPTION"
but still my devices wont turn on. Do you have any suggestion?
langithitam said:
Hi @VD171
I've tried u'r method for Error: "STATUS_EXT_RAM_EXCEPTION"
but still my devices wont turn on. Do you have any suggestion?
Click to expand...
Click to collapse
Did you flash the original stock MIUI again using the FIRMWARE UPGRADE mode?
VD171 said:
Did you flash the original stock MIUI again using the FIRMWARE UPGRADE mode?
Click to expand...
Click to collapse
Yes i did. I even flash the global & chinese ROM, but still gave me that error message
langithitam said:
Yes i did. I even flash the global & chinese ROM, but still gave me that error message
Click to expand...
Click to collapse
So, I'm not sure.
You need to keep trying everything you can.
That's just an ocasionally error.
Hi guys, i flashed with sp flash tool but i failed formating all and now i dont have IMEI
Now i just read your advice
Otherwise, you will LOSE all secure and identifying infos for your device. Like IMEI and MAC.
What can i do now? I am in 12.0.8 and cant unlock bootloader because i cant add miui account and cant use the phone because google verification..
I now what my imei is because i have the box of the phone can i do something?
Thx for the help
Montaal said:
Hi guys, i flashed with sp flash tool but i failed formating all and now i dont have IMEI
Now i just read your advice
Otherwise, you will LOSE all secure and identifying infos for your device. Like IMEI and MAC.
What can i do now? I am in 12.0.8 and cant unlock bootloader because i cant add miui account and cant use the phone because google verification..
I now what my imei is because i have the box of the phone can i do something?
Thx for the help
Click to expand...
Click to collapse
You need to recover your imei writing that using modem meta and engineering room.
Good luck
Hi, I'm a MediaTek LTD and MediaTek Inc engineer.
I will remain anonymous using my son's account.
MediaTek MT6765 has a problem with DRAM when flashing with generic DA library. This makes the error STATUS_EXT_RAM_EXCEPTION to appear on SP flash tool. We provide the generic DA libs for development-only instances, but the companies like Xiaomi make modifications to the Scatter and DA lib file. This is the solution:
1. Download fastboot rom for your device (not the recovery one, it should weight 3 - 4GB)
2. Unpack it
3. Open SP Flash Tool, go to Options > General and deactivate CHECK LIB DA MATCH
4. Now load the DA file from the rom of your device
5. Load the Scatter file from the rom of your device
6. Select Firmware Upgrade mode
7. Start download
8. Connect your device with a USB cable (disconnected battery) and enter into MTK Flash Mode
Solved!
Sincerely
An unknown engineer from MediaTek Engineering Department
XdaInsiderAndDev said:
Hi, I'm a MediaTek LTD and MediaTek Inc engineer.
I will remain anonymous using my son's account.
MediaTek MT6765 has a problem with DRAM when flashing with generic DA library. This makes the error STATUS_EXT_RAM_EXCEPTION to appear on SP flash tool. We provide the generic DA libs for development-only instances, but the companies like Xiaomi make modifications to the Scatter and DA lib file. This is the solution:
1. Download fastboot rom for your device (not the recovery one, it should weight 3 - 4GB)
2. Unpack it
3. Open SP Flash Tool, go to Options > General and deactivate CHECK LIB DA MATCH
4. Now load the DA file from the rom of your device
5. Load the Scatter file from the rom of your device
6. Select Firmware Upgrade mode
7. Start download
8. Connect your device with a USB cable (disconnected battery) and enter into MTK Flash Mode
Solved!
Sincerely
An unknown engineer from MediaTek Engineering Department
Click to expand...
Click to collapse
Thank you very much for your contribution.
I love MediaTek
Thanks, I will be providing source-code of new lines of SoC to the community. I really love the possibility to customize your Android and it's not fair that MediaTek is not providing source code officially. I will see if I can do more for more MTK devices.
Note: Originally we used SP Flash Tool to flash stock software, now that we don't use it anymore, we gave it to you but I didn't remember they included the option CHECK LIB DA MATCH for you to not be able to modify the stock software DRAM values. Sorry for that.
And I love how the community always find a way to customize their Androids.
XdaInsiderAndDev said:
Thanks, I will be providing source-code of new lines of SoC to the community. I really love the possibility to customize your Android and it's not fair that MediaTek is not providing source code officially. I will see if I can do more for more MTK devices.
Note: Originally we used SP Flash Tool to flash stock software, now that we don't use it anymore, we gave it to you but I didn't remember they included the option CHECK LIB DA MATCH for you to not be able to modify the stock software DRAM values. Sorry for that.
And I love how the community always find a way to customize their Androids.
Click to expand...
Click to collapse
Thank you for the opportunity to know a little about the technical part.
We rarely have this chance, as it depends on its own experience and generosity in sharing.
XdaInsiderAndDev said:
Hi, I'm a MediaTek LTD and MediaTek Inc engineer.
I will remain anonymous using my son's account.
MediaTek MT6765 has a problem with DRAM when flashing with generic DA library. This makes the error STATUS_EXT_RAM_EXCEPTION to appear on SP flash tool. We provide the generic DA libs for development-only instances, but the companies like Xiaomi make modifications to the Scatter and DA lib file. This is the solution:
1. Download fastboot rom for your device (not the recovery one, it should weight 3 - 4GB)
2. Unpack it
3. Open SP Flash Tool, go to Options > General and deactivate CHECK LIB DA MATCH
4. Now load the DA file from the rom of your device
5. Load the Scatter file from the rom of your device
6. Select Firmware Upgrade mode
7. Start download
8. Connect your device with a USB cable (disconnected battery) and enter into MTK Flash Mode
Solved!
Sincerely
An unknown engineer from MediaTek Engineering Department
Click to expand...
Click to collapse
here the same error persists
Hi people thankyou for everything but the issue is not solved. Error: "STATUS_EXT_RAM_EXCEPTION" The same error is coming again and again. Mobile REALME C11 Purchased 2020. Tried ROMS { REALME_C11_RMX2185_11_A.109_220801 --- REALME_C11_2021_RMX3231_11.A.87_202208171849 --- RMX2185_11_A.69_200812} Mobile in red state.
My bootloader was unlocked before But I thought I should lock it again so I use this post (https://c.realme.com/in/post-details/1365228796868915200)
Commands {
- Enter the command: adb reboot bootloader
- Press “Enter” on your keyboard
- Enter the command: fastboot flashing lock
- Press “Enter” on your keyboard
}
There is a catch after that there I use one extra command fastboot reboot
After that I am just surfing the internet. Approx all methods I tried. Please Help
XdaInsiderAndDev said:
Thanks, I will be providing source-code of new lines of SoC to the community. I really love the possibility to customize your Android and it's not fair that MediaTek is not providing source code officially. I will see if I can do more for more MTK devices.
Note: Originally we used SP Flash Tool to flash stock software, now that we don't use it anymore, we gave it to you but I didn't remember they included the option CHECK LIB DA MATCH for you to not be able to modify the stock software DRAM values. Sorry for that.
And I love how the community always find a way to customize their Androids.
Click to expand...
Click to collapse
hello sir, i want to disable check lib da in sptool console mode but i can't find any solution its still throwing me check lib da match error even i turn it off in option in sptool
XinextialMatrix said:
hello sir, i want to disable check lib da in sptool console mode but i can't find any solution its still throwing me check lib da match error even i turn it off in option in sptool
Click to expand...
Click to collapse
As I know, in console mode is, if not impossible, very hard to do that, however I would have to talk with my friend which helped in the creation of SP Flash Tool (known as flash_tool internally).
All I can recommend is using the latest version available on the web and running it in Windows 10 21H1 or above, as administrator and using the GUI for disabling CHECK LIB DA MATCH, unfortunately, I can't provide flash_tool for linux because of my contract.
if you are still facing this message STATUS_EXT_RAM_EXCEPTION format running 0 prcent, it may your emmc is corrupted,
XdaInsiderAndDev said:
Hi, I'm a MediaTek LTD and MediaTek Inc engineer.
I will remain anonymous using my son's account.
MediaTek MT6765 has a problem with DRAM when flashing with generic DA library. This makes the error STATUS_EXT_RAM_EXCEPTION to appear on SP flash tool. We provide the generic DA libs for development-only instances, but the companies like Xiaomi make modifications to the Scatter and DA lib file. This is the solution:
1. Download fastboot rom for your device (not the recovery one, it should weight 3 - 4GB)
2. Unpack it
3. Open SP Flash Tool, go to Options > General and deactivate CHECK LIB DA MATCH
4. Now load the DA file from the rom of your device
5. Load the Scatter file from the rom of your device
6. Select Firmware Upgrade mode
7. Start download
8. Connect your device with a USB cable (disconnected battery) and enter into MTK Flash Mode
Solved!
Sincerely
An unknown engineer from MediaTek Engineering Department
Click to expand...
Click to collapse
I don't see the DA file in my fastboot rom, could it be called something else
VD171 said:
WARNINGS:
Keep your backup files safe and secure ! If you can, encrypt them.
If you try to flash in "firmware upgrade" mode, bootloader will be LOCKED again !
Never try to flash in "format all" mode ! Otherwise, you will LOSE all secure and identifying infos for your device. Like IMEI and MAC.
Never try to share your backups or your security and privacy will be compromised.
USE AT YOUR OWN RISK. I AM NOT RESPONSIBLE FOR YOUR ACTIONS.
Did you have any other error not mentioned here ?
Just attach the screenshot of the error and explain some what you did to get this error and we will try to help.
Good luck !
Error: "LIB DA not match"
If you are facing this issue, you have three solutions for that error:#1. Try on Linux.#2. Download an older version of the SP Flash Tool. See "Alternative Downloads" in this guide: https://forum.xda-developers.com/t/...for-merlin-redmi-note-9-redmi-10x-4g.4229937/#3. Uncheck "LIB DA match" in the Options. Check step #10 of this guide: https://forum.xda-developers.com/t/...for-merlin-redmi-note-9-redmi-10x-4g.4229937/
Error: "PMT changed for the ROM"
Firstly, NEVER try to flash in "format all" mode !Otherwise, you will LOSE all secure and identifying infos for your device. Like IMEI and MAC.If you are facing "PMT changed" message, your device has an older scatter file inside it.This is because there is any modification to the scatter file you are using to the scatter file used before.There are some minor changes from scatter file of the MIUI 11 to the scatter file of MIUI 12, but nothing significant. You can ignore it.You have two solutions for that error:#1. Use the same scatter file present on the device.#2. Flash using "firmware upgrade" mode and a new PMT will be written.But, if you flash using "firmware upgrade" mode, bootloader will be LOCKED again and userdata will be ERASED.If you want, you can backup the state of unlocked bootloader BEFORE the "firmware upgrade" and then restore it after.Just follow this guide before the "firmware upgrade": https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4220013/
Error: "STATUS_BROM_CMD_STARTCMD_FAIL"
Just simple try to boot/reboot your device.Once is enough.It will refresh the download/EDL mode.
Error: "STATUS_SEC_AUTH_FILE_NEEDED"
If you are facing this error, you are trying to flash using EDL mode.Firstly, try to flash in download mode and not in EDL mode.Just connect the powered off device without press any key.If you want to flash in EDL mode, you need to bypass authentication.Just follow this guide: https://forum.xda-developers.com/t/...d-flash-in-edl-with-no-auth-for-free.4229679/
Error: "STATUS_BROM_CMD_FAIL"
If you are facing this error, you are trying to flash using EDL mode.Firstly, try to flash in download mode and not in EDL mode.Just connect the powered off device without press any key.If you want to flash in EDL mode, you need to bypass authentication.Just follow this guide: https://forum.xda-developers.com/t/...d-flash-in-edl-with-no-auth-for-free.4229679/
Error: "STATUS_BROM_CMD_SEND_DA_FAIL"
Just use the properly DA (Download-agent) file for MERLIN devices.Here you can find DA files for MERLIN: https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4209765/
Error: "STATUS_EXT_RAM_EXCEPTION"
Firstly, NEVER try to flash in "format all" mode !Otherwise, you will LOSE all secure and identifying infos for your device. Like IMEI and MAC.If you are facing "EXT RAM Exception" message, probably your device is DEAD or uncompatible with ROM variant.Just Flash using the "FIRMWARE UPGRADE" mode and your device will be alive again.If you flash using "firmware upgrade" mode, bootloader will be LOCKED again and userdata will be ERASED.If you want, you can backup the state of unlocked bootloader BEFORE the "firmware upgrade" and then restore it after.Just follow this guide before the "firmware upgrade": https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4220013/
Do you need help with your MERLIN device ?
Read this FAQ: https://forum.xda-developers.com/t/...for-merlin-redmi-note-9-redmi-10x-4g.4225163/
Click to expand...
Click to collapse
Sir, can you help me?
My phone is Redmi Note 9 Merlin. I initially experienced a bootloop after updating the ROM via twrp, then I tried to unbrick it using the MTK Auth Bypasstool and FlashTool. When using FlashTool, I got the error "Sp Flash Tool Error : Status_Ram_Exception (0xC0050005)" so I tried the method from the beginning, namely using MTK Auth Bypasstool, but it didn't work. My phone won't even turn on. I really ask for your help
RogerRedminote9 said:
Sir, can you help me?
My phone is Redmi Note 9 Merlin. I initially experienced a bootloop after updating the ROM via twrp, then I tried to unbrick it using the MTK Auth Bypasstool and FlashTool. When using FlashTool, I got the error "Sp Flash Tool Error : Status_Ram_Exception (0xC0050005)" so I tried the method from the beginning, namely using MTK Auth Bypasstool, but it didn't work. My phone won't even turn on. I really ask for your help
Click to expand...
Click to collapse
lol, my phone just out off battery
XdaInsiderAndDev said:
Hi, I'm a MediaTek LTD and MediaTek Inc engineer.
I will remain anonymous using my son's account.
MediaTek MT6765 has a problem with DRAM when flashing with generic DA library. This makes the error STATUS_EXT_RAM_EXCEPTION to appear on SP flash tool. We provide the generic DA libs for development-only instances, but the companies like Xiaomi make modifications to the Scatter and DA lib file. This is the solution:
1. Download fastboot rom for your device (not the recovery one, it should weight 3 - 4GB)
2. Unpack it
3. Open SP Flash Tool, go to Options > General and deactivate CHECK LIB DA MATCH
4. Now load the DA file from the rom of your device
5. Load the Scatter file from the rom of your device
6. Select Firmware Upgrade mode
7. Start download
8. Connect your device with a USB cable (disconnected battery) and enter into MTK Flash Mode
Solved!
Sincerely
An unknown engineer from MediaTek Engineering Department
Click to expand...
Click to collapse
Everything works, you saved my phone! Thank you very much and good luck to everyone !!